Spectrophotometric determination of gatifloxacin in pure form and in pharmaceutical formulation

Simple, rapid, and extractive spectrophotometric methods were developed for the determination of gatifloxacin (GT) in bulk and pharmaceutical dosage form. These methods are based on the formation of yellow ion-pair complexes between the basic nitrogen of the drug and three sulphonphthalein acid dyes, namely; bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB) and bromothymol blue (BTB) in phthalate buffer pH 3.0, 3.4 and 3.2, using BCG, BCP and (BPB or BTB), respectively. The formed complexes were extracted with chloroform and measured at 415, 417, 412 and 414 nm for BCG, BPB, BCP and BTB, respectively. The analytical parameters and their effects on the reported systems are investigated. The reactions were extremely rapid at room temperature and the absorbance values remains unchanged at 48 h for all reactions. Beer's law was obeyed in the ranges 2.0-20, 2.0-14 and 2.0-16 microg mL(-1) for BCG, BCP and (BPB or BTB), respectively. The composition of the ion pairs was found 1:1 by Job's method. Beer's law validation, accuracy, precision, limits of detection, limits of quantification. The proposed methods have been applied successfully for the analysis of the drug bulk form and its dosage form. The results were in good agreement with those obtained by the official and reported methods.     

Spectrophotometric quantification of fluoxetine hydrochloride: Application to quality control and quality assurance processes

Simple and rapid spectrophotometric methods have been developed for the microdetermination of fluoxetine HCl. The proposed methods are based on the formation of ion-pair complexes between fluoxetine and bromophenol blue (BPB), bromothymol blue (BTB), bromocresol green (BCG), and bromocresol purple (BCP) which can be measured at optimum λ_max. Optimization of reaction conditions was investigated. Beerșs law was obeyed in the concentration ranges of 0.5–8.0 μg mL⁻¹, whereas optimum concentration as adopted from the Ringbom plots was 0.7–7.7 μg mL⁻¹. The molar absorptivity, Sandell sensitivity, and detection limit were also calculated. The most optimal and sensitive method was developed using BCG. The correlation coefficient was 0.9988 (n = 6) with a relative standard deviation of 1.25, for six determinations of 4.0 μg mL⁻¹. The proposed methods were successfully applied to the determination of fluoxetine hydrochloride in its dosage forms and in biological fluids (spiked plasma sample) using the standard addition technique.     

UV–Second Derivative Spectrophotometric and Colorimetric Methods for the Determination,Validation and Thermogravimetric Analysis of New Oral Antidiabetic Pioglitazone in Pure and Pharmaceutical Preparations

Abstract

Three rapid, sensitive, and simple spectrophotometric methods have been developed for the determination of pioglitazone in pure and pharmaceutical preparations.

For the first method, UV-spectrophotometry, standard solutions were measured at 270.2 nm. The first method was linear from 5.0–20.0 µgmL^?1. The linearity was found to be 5.0–20.0 µgmL^?1. For the second method, the distances between two extremum values (peak-to-peak amplitudes), 272.0 and 287.4 nm were measured in the second order derivative-spectra of standard solutions. Calibration curves were constructed by plotting d² A/dλ² values against concentrations, 2.0–12.0 µgmL^?1 of pioglitazone standards in acetonitrile. The detection limits of pioglitazone were 0.10 and 0.16 µgmL^?1 for UV and derivative spectrophotometric methods, respectively. The third method was based on the formation of an ion association complex with bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB), and bromothymol blue (BTB). The assay was linear over the concentration range of 20.0–100.0 µgmL^?1 for BCG, 10.0–100.0 µgmL^?1 for BCP, 20.0–120.0 µgmL^?1 for BPB, and 10.0–100.0 µgmL^?1 for BTB. The detection limits of pioglitazone was found to be 0.14 µg mL^?1 for BCG, 0.32 for BCP, 1.24 µgmL^?1 for BPB, and 0.22 µgmL^?1 for BTB. The thermal analysis of the pioglitazone was studied by Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC) techniques. Enthalpy change of pioglitazone was found to be 85.16 J/g. The proposed methods were validated according to the ICH guidelines (1996) with respect to specificity, linearity, limits of detection and quantification, accuracy, precision, and robustness. The results demonstrated that the procedure is accurate, precise, specific, and reproducible (percent relative standard deviation <2%), while being simple and less time consuming. The three proposed methods have been successfully applied to the assay of pioglitazone in pure and in pharmaceutical preparations. The results compared with those obtained by an ultraviolet spectrophotometric method using t and F tests.     

Heteroassociation of the bromine-containing anions of sulfophthaleins in aqueous solution

The ability of bromine-containing anions of sulfophthalein dyes, such as bromophenol blue (BPB), bromocresol green (BCG), bromocresol purple (BCP), bromothymol blue (BTB), as well as non-substituted phenol red (PhR), to form heteroassociates in aqueous solution was investigated. Singly and doubly charged anions BPB, BCG, BCP, BTB, and PhR (HAn^-, An^2-) are capable of forming stable heteroassociates of composition Ct⁺•HAn^- and (Ct+)2•An^2- with cationic polymethine dyes (Ct+), such as pinacyanol and quinaldine red. The enthalpies of formation of the dye ions and heteroassociates were calculated by semiempirical methods, and the most probable structure of heteroassociates was determined.     

Three Spectrophotometric Methods for the Determination of Oxomemazine Hydrochloride in Bulk and in Pharmaceutical Formulations Using Bromocresol Green,Congo Red,and Methyl Orange

Abstract

Three simple, sensitive, and highly accurate spectrophotometric methods have been developed for the determination of oxomemazine hydrochloride (OXO‐HCl) in bulk and in pharmaceutical formulations. These methods are based on the formation of yellow ion‐pair complexes between the examined drug and bromocresol green (BCG), congo red (CR), and methyl orange (MO) as reagents in universal buffer solution of pH 3.0, 5.5, and 3.5, respectively. The formed complexes were extracted with chloroform and measured at 413, 495, and 484 nm, respectively for the three systems. The best conditions of the reaction were studied and optimized. Beer's law was obeyed in the concentration ranges 2.0–18.0, 2.0–14.0, and 2.0–16.0 µg ml^?1 with molar absorptivity of 4.1×10⁴, 1.1×10⁴, and 3.5×10⁴ mol^?1cm^?1, for the BCG, CR, and MO methods, respectively. Sandell's sensitivity, correlation coefficient, detection, and quantification limits are also calculated. The proposed methods have been applied successfully for the analysis of the drug in pure and in its dosage forms. No interference was observed from common pharmaceutical excipients and additives. Statistical comparison of the results with those obtained by HPLC method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Simple and Sensitive Extractive Spectrophotometeric Method for the Assay of Mebeverine Hydrochloride in Pure and Pharmaceutical Formulations

Simple, sensitive, rapid and cost effective extraction spectrophotometric methods are described for the assay of mebeverine hydrochloride (MBH) in bulk samples and pharmaceutical formulations. These two methods (Bromophenol blue and Erichrome Black‐T) are based on the formation of chloroform soluble ion‐pair complexes of MBH with Bromophenol blue (BPB) and with Erichrome Black‐T (EBT), to form yellow and pink colored chromogen in a Glycine‐HCl buffer of pH 2.4 (BPB) and in a KCl‐HCl buffer of pH 1.4 (EBT) with absorbance maximum at 416 nm and at 524 nm for BPB and EBT respectively. The calibration graph is found to linear over 0.2–20 μg/mL (BPB) and 0.2–20 μg/mL (EBT), with molar absorptivity values of 1.8295 × 10⁴ 1 moL^?1 cm^?1 and 1.5896 × 10⁴ 1 moL^?1 cm^?1, respectively. The LOD (Limit of Detection) were found to be 0.090 μg/mL and 0.084 μg/mL and LOQ (Limit of Quantification) were 0.2997 μg/mL and 0.2730 μg/mL for the BPB and EBT method, respectively. The results of analysis for the two methods have been validated statistically and by recovery studies. The results are compared with those obtained with reported method. The proposed methods are simple, sensitive, accurate and suitable for quality control applications.     

Spectrophotometric determination of hyoscine butylbromide and famciclovir in pure form and in pharmaceutical formulations

A simple, rapid, and extractive spectrophotometric method was developed for the determination of hyoscine butylbromide (HBB) and famciclovir (FCV) in pure and pharmaceutical formulations. These methods are based on the formation of yellow ion-pair complexes between the basic nitrogen of the drug and four sulphonphthalein acid dyes, namely; bromocresol green (BCG), bromothymol blue (BTB), bromocresol purple (BCP) and bromophenol blue (BPB) in phthalate buffer of pH range (3.0-3.5). The formed complexes were extracted with chloroform and measured at 420, 412, 409 and 415nm for HBB and at 418, 412, 407 and 414nm for FCV using BCG, BTB, BCP and BPB, respectively. The analytical parameters and their effects on the reported systems are investigated. Beer's law was obeyed in the range 1.0-20mugmL(-1) with correlation coefficient (n=6)>/=0.9997. The molar absorptivity, Sandell sensitivity, detection and quantification limits were also calculated. The composition of the ion pairs was found 1:1 by Job's method in all cases and the conditional stability constant (K(f)) of the complexes have been calculated. The free energy changes (DeltaG) were determined for all complexes formed. The proposed methods have been applied successfully for the analysis of the studied drugs in pure and pharmaceutical formulations with percentage recoveries ranges from 99.84 to 100.26. The results were in good agreement with those obtained by the official methods.     

Spectrophotometric methods for sertraline hydrochloride and/or clidinium bromide determination in bulk and pharmaceutical preparations

A spectrophotometric procedure for the determination of sertraline hydrochloride (Sert) and/or clidinium bromide (Clid) in bulk sample and in dosage forms was developed. The purpose of this work was to develop a rapid, simple, inexpensive, precise, and accurate visible spectrophotometric method. The procedure is based on formation of an ion-pair complex by their reaction with bromocresol green (BCG), bromophenol blue (BPB), and bromothymol blue (BTB) in buffered aqueous solution at pH 3. The colored products are extracted into a polar solvent and measured spectrophotometrically at the optimum λ_max for each complex. Optimization of different experimental conditions is described. Regression analysis of Beer-Lambert plots showed good correlation in the concentration range of 1–30 μg mL⁻¹. The apparent molar absorptivity, Sandell sensitivity, detection and quantification limits were calculated. For more accurate analysis, Ringbom optimum concentration range of 2–27 μg mL⁻¹ was used. The developed methods were successfully applied for the determination of sertraline hydrochloride and clidinium bromide in bulk in pharmaceutical formulations without any interference from common excipients. The procedure has the advantage of being highly sensitive and simple for the determination of the studied drugs, weak UV-absorbing compounds.     

Extractive Spectrophotometric Methods for Determination of Clarithromycin in Pharmaceutical Formulations Using Bromothymol Blue and Cresol Red

Two simple and sensitive extractive spectrophotometric methods have been described for the analysis of clarithromycin in pure form and in pharmaceutical formulations. The methods involved formation of yellow colored chloroform extractable ion‐association complexes of clarithromycin with bromothymol blue (BTB) and cresol red (CR) in buffered aqueous solution at pH 4. The extracted complexes showed maximum absorbance at 410 and 415 nm for BTB and CR, respectively. Beer's law is obeyed in the concentration ranges 0.1–20 μg mL^?1 and 2.0–20 μg mL^?1 of clarithromycin with molar absorptivity of 2.01 × 10⁴ and 4.378 × 10³ for BTB and CR, respectively. The composition ratio of the ion‐association complex was clarithromycin: BTB and CR = 1:1 as established by Job's method. The methods have been applied to the determination of drug in commercial formulations. The results of analysis were validated statistically and through recovery studies.     

Two simple and rapid spectrophotometric methods for the determination of a new antihypertensive drug olmesartan in tablets

Two simple, rapid and reproducible spectrophotometric methods have been described for the assay of olmesartan (OLM) in pharmaceutical formulation. The methods are based on the formation of ion associates in the reactions between the studied drug substance and ion-pair agents [bromocresol green (BCG) and bromophenol blue (BPB)]. By the extraction with dichloromethane and chloroform, yellow-colored ion associates were formed in acidic medium and absorbances were measured at 409 (BCG) and 412 nm (BPB). Optimizations of the reaction conditions were performed. Beer’s law was obeyed within the concentration range from 1–40 μg/mL and 10–120 μg/mL, respectively, for BCG and BPB. The molar absorptivity, detection and quantification limits were also determined. The developed methods were applied successfully to the determination of this drug in tablets.     

Spectrophotometric determination of carbamazepine and mosapride citrate in pure and pharmaceutical preparations

Simple, rapid and sensitive spectrophotometric methods were developed for the determination of carbamazepine and mosapride citrate drugs in pure and pharmaceutical dosage forms. These methods are based on ion pair and charge transfer complexation reactions. The first method is based on the reaction of the carbamazepine drug with Mo(V)–thiocyanate in hydrochloric acid medium followed by an extraction of the coloured ion-pair with 1,2-dichloroethane and the absorbance of the ion pair was measured at 470 nm. The second method is based on the formation of ion-pairs between mosapride citrate and two dyestuff reagents namely bromothymol blue (BTB) and bromocresol green (BCG) in a universal buffer of pH 4 and 3, respectively. The formed ion-pairs are extracted with chloroform and methylene chloride and measured at 412 and 416 nm for BTB and BCG reagents, respectively. The third method is based on charge transfer complex formation between mosapride citrate (electron donor) and DDQ (π-acceptor reagent) and the absorbance of the CT complexes was measured at 450 nm. All the optimum conditions are established. The calibration graphs are rectilinear in the concentration ranges 10–350 for carbamazepine using Mo(V)–thiocyanate and 4–100, 4–60 and 10–150 μg mL^?1 for mosapride citrate using BTB, BCG and DDQ reagents, respectively. The Sandell sensitivity (S), molar absorptivity, correlation coefficient, regression equations and limits of detection (LOD) and quantification (LOQ) are calculated. The law values of standard deviation (0.04–0.09 for carbamazepine using Mo(V)–thiocyanate and 0.022–0.024, 0.013–0.018 and 0.013–0.020 for mosapride citrate using BTB, BCG and DDQ, respectively) and relative standard deviation (0.630–2.170 for carbamazepine using Mo(V)–thiocyanate and 0.123–1.43, 0.102–0.530 and 0.226–1.280 for mosapride citrate using BTB, BCG and DDQ, respectively) reflect the accuracy and precision of the proposed methods. The methods are applied for the assay of the two investigated drugs in pharmaceutical dosage forms. The results are in good agreement with those obtained by the official method.     

Determination of Labetalol Hydrochloride in Drug Formulations by Spectrophotometry

A validated, selective and sensitive spectrophotometric method has been developed for the determination of labetalol hydrochloride in commercial dosage forms. The method is based on the coupling reaction of positive diazonium ion of 4‐aminobenzenesulfonic acid with phenolate ion of labetalol to form a colored azo compound which absorbs maximally at 395 nm. Under the optimized experimental conditions, the color is stable up to 2 h and Beer's law is obeyed in the concentration range of 0.8–17.6 μg mL^?1 with a linear regression equation of A = 4.84 × 10^?4 + 7.864 × 10^?2 C and coefficient of correlation, r = 0.9999. The molar absorptivity and Sandell's sensitivity are found to be 2.874 × 10⁴ L mol^?1 cm^?1 and 0.013 μg cm^?2 per 0.001‐absorbance unit, respectively. The limits of detection and quantitation of the proposed method are 0.08 and 0.23 μg mL^?1, respectively. The intra‐day and inter‐day precision variation and accuracy of the proposed method is acceptable with low values of standard analytical error. The recovery results obtained by the proposed method in drug formulations are acceptable with mean percent recovery ± RSD of 99.97 ± 0.52 ‐ 100.03 ± 0.63%. The results of the proposed method compared with those of Bilal's spectrophotometric method indicated excellent agreement with acceptable true bias of all samples within ± 2.0%.     

Spectrophotometric Determination of Esomeprazole Magnesium in Commercial Tablets Using 5‐Sulfosalicylic Acid and N‐Bromosuccinimide

Two simple, sensitive and economical spectrophotometric methods have been developed for the determination of esomeprazole magnesium in commercial dosage forms. Method A is based on the reaction of esomeprazole magnesium with 5‐sulfosalicylic acid in methanol to form a yellow product, which absorbs maximally at 365 nm. Method B utilizes the reaction of esomeprazole magnesium with N‐bromosuccinimide in acetone‐chloroform medium to form α‐bromo derivative of the drug peaking at 380 nm. Under the optimized experimental conditions, Beer's law is obeyed in the concentration ranges of 2‐48 and 10‐100 μg mL^?1 with molar absorptivity of 2.11 × 10⁴ and 4.57 × 10⁴L mol^?1 cm^?1 for methods A and B, respectively. The limits of detection for methods A and B are 0.35 and 0.46 μg mL^?1, respectively. No interference was observed from excipients commonly present in tablet formulations. Methods A and B are successfully applied to the commercial tablets for the estimation of esomeprazole magnesium with good accuracy and precision. The results compare favorably with the reference spectrophotometric method indicating no significant difference between the methods compared.     

Extractive Spectrophotometric Determination of Fluconazole by Ion-pair Complex Formation with Bromocresol Green

An extraction-spectrophotometric method for the determination of trace amounts of fluconazole was described. Fluconazole was effectively extracted as a 1 ： 1 ion-pair complex with bromocresole green （BCG） at pH 3.0 into chloroform, followed by spectrophotometric determination at 420 nm. Beer＇s law was obeyed over the range of 4-50 μg.mL^-1 of fluconazole with a detection limit of 3.7 μg.mL^-1 . The method is simple, rapid and sensitive. The procedure was applied to the determination of fluconazole in pharmaceutical preparations as well as its recovery from a blood serum sample.     

Simultaneous Kinetic‐Potentiometric Determination of Hydrazine and Thiosemicarbazide by Partial Least Squares and Principle Component Regression Methods

Simultaneous determination of hydrazine (HZ) and thiosemicarbazide (TSC) by partial least squares (PLS) and principle component regression (PCR) was carried out based on kinetic data of novel potentiometry. The rate of chloride ion production in reaction of HZ and TSC with N‐chlorosuccinimide (NCS) was monitored by a chloride ion‐selective electrode. The experimental dada shows not only the good ability of ion‐selective electrodes (ISEs) as detectors for the direct determination of chloride ions but also for simultaneous kinetic‐potentiometric analysis using chemometrics methods. The methods are based on the difference observed in the production rate of chloride ions. The results show that simultaneous determination of HZ and TSC can be performed in their concentration ranges of 0.7‐20.0 and 0.5‐20.0 μg mL^?1, respectively. The total relative standard error for applying PLS and PCR methods to 9 synthetic samples in the concentration ranges of 0.8‐10 μg mL^?1 of TSC and 1.0‐12.0 μg mL^?1 of HZ was 4.62 and 4.98, respectively. The effects of certain foreign ions upon the reaction rate were determined for the assessment of the selectivity of the method. Both methods (PLS and PCR) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ and TSC in water samples.     

Extractive-spectrophotometric methods for determination of anti-Parkinsonian drug in pharmaceutical formulations and in biological samples using sulphonphthalein acid dyes

A simple, accurate and highly sensitive spectrophotometric methods are proposed for the rapid and accurate determination of amantadine HCl (AMD) using bromocressol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB). The developed methods involve formation of stable yellow colored chloroform extractable ion-associate complexes of the amino derivative (basic nitrogen) of the AMD with three sulphonphthalein acid dyes, namely; BCG, BPB and BTB, in acidic medium. The ion-associates exhibit absorption maxima at 415, 412 and 414 nm for BCG, BPB and BTB, respectively. AMD can be determined up to 1.5–16.5, 1.4–14.0 and 1.6–17 μg mL^?1, respectively. The effect of optimum conditions via acidity, reagent concentration, time, and solvent was studied. The stoichiometry of the reaction was found to be 1:1 in all cases. The low relative standard deviation values indicate good precision and high recovery values. These methods have been successfully applied for the assay of AMD in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Extraction-spectrophotometric determination of amprolium hydrochloride using bromocresol green, bromophenol blue and bromothymol blue

A new procedure for the determination of amprolium hydrochloride by reaction with bromocresol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB) has been developed. The method consists of extracting the yellow ion-pair formed into chloroform from aqueous medium. The ion-pairs have absorption maxima at 420, 410 and 415 nm with molar absorptivities of 3.64 × 10⁴, 3.12 × 10⁴ and 2.31 × 10⁴1 mol^–1 cm^–1 for BCG, BPB and BTB, respectively. The method obeys Beer's law over the concentration ranges 0.6–12.0, 0.12–8.8 and 1.2–11.3 ag/ml amprolium hydrochloride for BCG, BPB and BTB, respectively. The method is simple, precise (relative standard deviation 0.665–2.210%), accurate (recovery 97.8–100.8%) and easily applied for pharmaceutical quality assurance for amprolium hydrochloride in raw materials and in formulated veterinary soluble powder.     

Study on the Interaction between a Novel Ionic Liquid Probe and Anionic Surfactants Using Resonance Light Scattering Spectra and Its Analytical Application

The interaction between anionic surfactants (AS) and 1‐hexadecyl‐3‐methylimidazolium bromide [C₁₆mim]Br was studied by using resonance light scattering (RLS) technique, UV‐Vis spectrophotometry and fluorometric methods. In Britton Robinson (BR) buffer (pH 6.0), [C₁₆mim]Br reacted with AS to form supermolecular complex which resulted in enhancement in RLS intensity. Their maximum RLS wavelengths were all at 390 nm. Some important interacting experimental variables, such as the solution acidity, [C₁₆mim]Br concentration, salt effect and addition order of the reagents, were investigated and optimized. Under the optimum conditions, quantitative determination ranges were 0.001–7 μg·mL^?1 for dodecyl sodium sulfate (SDS), 0.001–6 μg·mL^?1 for sodium dodecylbenzene sulfonate (SDBS) and 0.005–7 μg·mL^?1 for sodium lauryl sulfonate (SLS), respectively, while the detection limits were 1.3 ng·mL^?1 for SDS, 1.0 ng·mL^?1 for SDBS and 5.1 ng·mL^?1 for SLS, respectively. Based on the ion‐association reaction, a highly sensitive, simple and rapid method has been established for the determination of AS.     

Quantitative Analysis of Nicorandil in Commercial Tablets by Spectrophotometry

The main aim of this work is to develop and validate a spectrophotometric method for the determination of nicorandil in commercial tablets. The method is based on the reduction of the nitroxy ethyl group of nicorandil into carbonyl compound and nitrite ion by NH₄Cl and Zn dust. The nitrite ion thus formed reacts with potassium iodide and starch in dilute HCl medium to form a blue product, which absorbs maximally at 550 nm. Beer's law is obeyed in the concentration range 0.4‐4.0 μg mL^?1 with molar absorptivity of 7.92 × 10⁴L mol^?1 cm^?1. The detection limit is 0.017 μg mL^?1. The reaction conditions are optimized and validated as per the International Conference on Harmonisation guidelines (USA). The proposed method has been applied successfully for the determination of nicorandil in commercial tablets. The results of analyses are compared statistically with those of the author's spectrophotometric method, which confirmed that there is no significant difference between the methods compared.     

High Sensitivity and Reproducibility of a Bismuth/Poly(bromocresol purple) Film Modified Glassy Carbon Electrode for Determination of Trace Amount of Cadmium by Differential Pulse Anodic Stripping Voltammetry

This work described a novel type of bismuth/poly(bromocresol purple) film modified glassy carbon electrode (denoted as Bi/Poly(BCP)/GCE) for anodic stripping analysis of trace Cd²⁺. The Bi/Poly(BCP)/GCE was fabricated in situ by depositing simultaneously bismuth and cadmium by reduction at ?1.20 V on the poly(BCP) film using a differential pulse voltammetry. Under the optimum conditions, the anodic stripping peak current response increased linearly with the Cd²⁺ concentrations in a range of 2.0×10^?8–1.0×10^?7 M and 1.0×10^?7–6.0×10^?6 M in 0.1 M NaAc‐HAc buffer solution (pH 5.0) with the detection limit of 6.5×10^?9 M (S/N=3). The Bi/poly(BCP)/GCE performed good reproducibility and high sensitivity. Finally, this proposed method was successfully applied to determine the concentration of Cd²⁺ in water samples.