A New Silver(I) Potentiometric Sensor Based on a Calix[4]arene Substituted at the Narrow Rim by Amide/Phosphoryl Groups

A coated‐wire type silver ion‐selective electrode has been constructed using a modified p‐tert‐butyl‐calix[4]arene by amide‐phosphoryl groups, named 5, 11, 17, 23‐tetra‐tert‐butyl‐25, 27‐bis(diethylcarbamoylmethoxy)‐26,28‐bis(diphenylphosphinoylmethoxy)calix[4]arene (Calix), as neutral carrier. A plasticized PVC membrane containing 30% PVC, 60% ortho‐nitrophenyloctylether (NPOE), 2% sodium tetraphenylborate (NaTPB) and 8% “Calix” was coated on a graphite rod. The prepared electrode exhibited a linear Nernstian response over the range 1 × 10^?6 to 1 × 10^?2 M with a slope 58.4 (±0.2) mV per decade change and a detection limit of 6.3 × 10^?7 M. The working pH range of the sensor is 4‐6.7. It is found that the dynamic response time of the electrode to achieve a steady potential was very fast (～11 s). The selectivity of the sensor relative to NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Pb²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺ and Th⁴⁺ was examined. The prepared electrode exhibits adequate stability with good reproducibility (57.6 ± 0.5 mV per decade change for 10 weeks). It was successfully used as an indicator electrode in potentiometric titration of silver ions with standard solution of EDTA. The sensor was also used for silver ion measurements in various synthetic samples.     

Chromium(III) Potentiometric Sensor Based on Para‐Tertiary‐Butyl Calix[4]arene

A new chromium(III) PVC membrane sensor incorporating p‐tertiary‐butyl calix[4]arene as ionophore, potassium tetrakis as additive and dibutyl phthalate (DBP) as plasticizer was constructed. The electrode exhibited an excellent potentiometric response over a wide concentration range of 1.0×10^?7–1.0×10^?1 M with a Nernstian slope of 20±0.5 mV per decade. The detection limit was 5.0×10^?8 M. The electrode showed a better performance over a pH range of 3.0–8.0, and had a short response time of about <15 s.The electrode was successfully applied to potentiometric titration of Cr (III) with EDTA and for direct determination of chromium(III) in waste water.     

新型杯芳烃为载体的铅离子选择电极

报道了5,11,17,23-四（1,1-二甲基乙基）-25,27-二羟基-26,28-二[（2-丙酰胺）乙氧基]杯[4]芳烃1的合成及以此化合物为载体研制了PVC膜铅离子选择电极。研究了不同极性的膜增塑剂和亲脂性阴离子位点对铅离子选择电极响应性能的影响,测定了铅离子选择电极的性能。铅离子选择电极对铅离子表现出优良的能斯特响应和高选择性,能在pH4.0-6.5的范围内使用,该电极可作为电位滴定的指示电极。     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

杯[4]芳烃四丁醚的选择性硝化

硝化反应;杯[4]芳烃四丁醚的选择性硝化     

新型杯芳烃银离子选择电极的研究

报道了５,１１,１７,２３－四（１,１－二甲基乙基）－２５,２７－二羟基２６,２８－二「２－乙基硫）乙氧基」杯「４」芳烃为银离子载体的ＰＶＣ膜电极的研制。该银离子选择电极不仅对银离子有良好的灵敏度和高选择性,在１０＾－１－１０＾－５ｍｏｌ／Ｌ浓度范围内有良好的线性,能斯特响应为５６ｍＶ／ｐｅＡｇ．（２５℃）碱金属、碱土金属及过渡金属离子不干扰银的测定;而且对某些阴离子也表现出近似能斯特响应（５０ｍＶ／ｐｃｘ－）。用该电极对人工试样中银含量进行测定,结果与原子吸收光度法相符。     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Salicylate Ion‐Selective Electrode Based on a Calix[4]arene as Ionophore

A salicylate‐selective electrode based on calix[4]arene derivative was developed and its response characteristics were investigated. The optimum membrane composition was 1 % ionophore, 30 % PVC, 69 % DOS. The electrode exhibited a Nernstian slope of 58.8±0.5 mV/pSal in the range of 1.0×10^?5–1.0×10^?1 M with a detection limit of 4.3×10^?6 M at pH 4.0, 20±1 °C. The potentiometric response of the electrode in the presence of different anions was investigated by the separate solution method. The lifetime was found at least 4 months, and its response time was 5–10 s. It was successfully used for the potentiometric determination of salicylate in pharmaceutical preparations.     

基于杯[4]芳烃的手性识别*

手性杯芳烃是一类重要的主体化合物,在手性识别、对映体分离和不对称催化等方面有着广泛的用途。[4]芳烃引其稳定的构象和易于修饰的特点,成为研究最为广泛的杯芳烃分子,其中大量的文献报道了能够用于对映体识别和检测的手性[4]芳烃。在手性识别的研究中,荧光、紫外和核磁是3中最常见的研究方法,本文根据这3种方法进行分类,综述了近年来以杯[4]芳烃为分子骨架的手性受体的合成及其在手性识别中的应用。最后对手性[4]芳烃的发展前景作了展望。     

Selective Electrochemical Recognition of o-Phenylenediol by a Novel Calix[4]arene Derivative

A new type of calixarene-modified electrode has been prepared by directly coating the surface of a glassy carbon electrode with tetrahydrofuran solution containing 25,26,27,28-tetra-（3-amidino thiopropoxy）-5,11,17,23-tetratert-butylcalix[4]arene, and applied to the investigation of electrochemical behavior of phenylenediols. The results showed that the modified electrode could selectively recognize o-phenylenediol, making the over-potential of o-phenylenediol dropped and peak current increased greatly. The anodic peak current is proportional to the concentration of o-phenylenediol in the range of 1.0×10^-5-1.0×10^-4 mol·L^-1 with the detection limit （SIN=3） of 1.0×10^-7 mol·L^-1. The recognizing mechanism, including electrochemical process and binging sites, was also discussed using voltammetry.     

N-硫脲基套索杯[4]冠醚与四硫脲基杯[4]芳烃的合成

控制反应物的物质的量比, 杯式对叔丁基杯[4]-1,3-二乙酸乙酯衍生物1与5或50倍二乙烯三胺反应, 分别得到杯[4]氮杂冠醚2和开链的氮杂杯[4]芳烃衍生物3. 化合物2和3进一步与异硫氰酸苯酯反应得到首例侧链含硫脲基的套索杯[4]氮杂冠醚4和含4个硫脲基的杯[4]芳烃衍生物5, 产率为92%和87%. 新化合物的结构与构象经元素分析、红外、质谱、核磁共振谱等表征证实.     

Syntheses of Chiral Calix [4] arene Derivatives Bearing Amino Acid Residue

The syntheses of chirai calix[4]arene derivatives bearing amino acid residue at the lower rim or upper rim by three different methods were reported.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.     

基于四丹磺酰胺杯[4]芳烃的汞离子荧光化学传感器

我们方便地合成了上沿修饰四丹磺酰胺基团的杯[4]芳烃衍生物1,发现该化合物在含50％水的乙腈中显示出对汞离子高选择性和灵敏性的识别作用,竞争实验表明多数金属离子对其检测干扰较小。机理研究结果表明荧光萃灭源于由丹磺酰胺基团到汞离子的光致电子转移过程。另外,通过研究1和1-Hg2+的荧光衰减实验,以及对比双丹磺酰胺杯[4]芳烃2和单丹磺酰胺杯[4]芳烃3对汞离子的识别作用,发现化合物1的四丹磺酰胺基团具有很好的预组织和协同作用。化合物1对汞离子的检测限为3.41×10-6 mol·L-1,这可以使1成为一个潜在的汞离子荧光化学传感器。     

新型杯[4]芳烃衍生物的合成

以对叔丁基杯[4]芳烃为起始原料,通过一步或两步取代反应合成了对叔丁基杯[4]芳烃的衍生物(1和2),其结构经FT-IR,^1H NMR,FAB-MS表征．     

1,3-取代杯[4]芳烃三联吡啶配体的合成及其离子识别性能的研究

设计合成了1,3-取代杯[4]芳烃三联吡啶新型配体L1, 通过紫外吸收光谱的变化研究了配体L1对于Fe(II), Zn(II), Ni(II)等离子的识别作用.     

Azo calix[4]arene based neodymium(III)-selective PVC membrane sensor

We found that the PVC membrane, containing azo calix[4]arene is a suitable ionophore, exhibited a Nernstian response for neodymium (Nd³⁺) ions (with slope of 19.8 ± 0.2 mV decade⁻¹ for the triply charged ion) over a wide linear range of 4.0 × 10⁻⁸ to 1.0 × 10⁻¹ mol L⁻¹ with a detection limit 1.0 × 10⁻⁸ mol L⁻¹, a relatively fast response time, in the whole concentration range (<10 s), and a considerable life time at least for four months in the pH range of 4.0-8.0. Furthermore, the electrode revealed high selectivity with respect to all the common alkali, alkaline earth, transition and heavy metal ions, including the members of the lanthanide family other than Nd³⁺. Concerning its applications, it was effectively employed for the determination of neodymium ions in industrial waste water as well as in lake water.     

Response Characteristics of Copper‐Selective Polymer Membrane Electrodes Based on a Newly Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore

A novel macrocyclic calix[4]arene derivative was examined as an ionophore for ion‐selective polymeric membrane electrode toward Cu⁺² ions. The sensor showed a near Nernstian response for Cu(II) ions over a concentration range from 8.1×10^?6 to 1.0×10^?2 mol L^?1 with a slope of 34.2±0.4 mV per concentration decade in an acidic solution (pH 5). The limit of detection was 0.47 µg mL^?1. It had a response time of <20 s and can be used for at least 3 months without any divergence in potentials. The influence of plasticizer as well as the amount of lipophilic anionic site additive in the sensing membrane was discussed. It was shown that membrane electrodes formulated with the ionophore and appropriate anionic additive exhibited enhanced potentiometric response toward Cu²⁺ over all other cations tested. Since selectivity toward Cu²⁺ ions is decreased in the presence of high amount of the anionic additive, the ionophore can function as neutral carriers within the organic membrane phase. Validation of the assay method revealed good performance characteristics, including long life span, good selectivity for Cu²⁺ ions over a wide variety of other metal ions, long term response stability, and high reproducibility. The sensors were used for direct measurement of copper content in different rocks collected from different geological zones. The results agreed fairly well with data obtained using atomic absorption spectrometry.     

四硫脲基杯[4]芳烃衍生物的合成

对叔丁基杯[4]-1,3-二乙酸乙酯与过量的二乙基三胺反应,生成含有游离氨基的杯芳烃酰胺衍物(2),2再与异硫氰酸苯酯反应合成了含4个硫脲基的杯[4]芳烃衍生物,其结构经1H NMR,IR,MS和元素分析表征。