Synthesis,self‐assembly and reversible healing of supramolecular perfluoropolyethers

The synthesis and thermomechanical properties of a novel class of self‐healing perfluoropolyethers (PFPEs) is reported. By decoration of 2‐ureido‐4[1H]‐pyrimidone end groups on the termini of low molar mass PFPE, the formation of supramolecular polymers and networks held together via hydrogen bonding associations was achieved. These novel supramolecular polymer materials exhibit a combination of enhanced modulus and elasticity, along with self‐healing properties, where rapid self‐healing time was demonstrated using dynamic rheological measurements. These types of supramolecular PFPEs are anticipated to be useful for a number of emerging areas in lubrication. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3598–3606     

The preparation of primary poly-hexafluoropropylene oxide halides (poly-HFPO-CF2X where X = I, Br, Cl and F)

Perfluorinated polyethers (PFPEs) are an important class of chemicals in industry due to their outstanding thermal stability, chemical inertness, and low vapor pressure. Since the first report on the polymerization of hexafluoropropylene oxide, there have been many papers on functionalized PFPEs. We have found that the reaction of poly-hexafluoropropylene oxide (HFPO) acid fluoride with LiI leads, to first the secondary and subsequently, to the primary poly-HFPO iodide. The primary poly-HFPO iodide, like perfluoroalkyl iodide, should provide the starting point for many new products. In this paper, from the primary poly-HFPO iodide we have prepared the family of primary poly-HFPO halides (X = I, Br, Cl and F). Their spectral data are discussed.     

Novel perfluoropolyethers containing 2,2,4-trifluoro-5-trifluoromethoxy-1,3-dioxole blocks: synthesis and characterization

Peroxidic perfluoropolyethers (PFPEs) are industrial intermediates used by Solvay Solexis for the preparation of different classes of (per)fluoropolyethers (Fomblin^®, Galden^®, Solvera^®, Fluorolink^®). The chemistry of these peroxidic compounds has been recently exploited for the synthesis of novel PFPE block copolymers. In the present work we report the synthesis, the structural and physical-chemical characterization of block copolymers obtained by the reaction of peroxidic PFPEs with 2,2,4-trifluoro-5-trifluoromethoxy-1,3-dioxole, a cyclic homopolymerizable perfluoroolefin. These block copolymers combine the most attractive properties of the PFPEs, like the excellent lubrication, the high thermal stability and the optical transparency, with new specific properties which are related to the perfluorodioxolenic blocks.     

Perfluoropolyether–tetrafluoroethylene (PFPE–TFE) block copolymers: An innovative family of fluorinated materials

A new technological platform, based on the chemistry of the peroxidic perfluoropolyethers, has been recently developed for the synthesis of innovative fluorinated materials. Perfluoropolyether–tetrafluorethylene (PFPE–TFE) copolymers are one of the most representative examples of the potential and the flexibility of this technology. By tuning the reaction parameters, the structure of these copolymers can be easily modulated to obtain products with the desired chemical–physical and rheological properties. Applications are endless, from thin film lubrication to gel based greases, to additives for plastics, rubber and other compounds. This technology will lead to entirely new classes of PFPE materials that will fill many of the gaps existing today in markets not currently served by PFPEs.     

Solvent-resistant photocurable liquid fluoropolymers for microfluidic device fabrication [corrected

We report the first fabrication of a solvent-compatible microfluidic device based on photocurable "Liquid Teflon" materials. The materials are highly fluorinated functionalized perfluoropolyethers (PFPEs) that have liquidlike viscosities that can be cured into tough, highly durable elastomers that exhibit the remarkable chemical resistance of fluoropolymers such as Teflon. Poly(dimethylsiloxane) (PDMS) elastomers have rapidly become the material of choice for many recent microfluidic device applications. Despite the advantages of PDMS in relation to microfluidics technology, the material suffers from a serious drawback in that it swells in most organic solvents. The swelling of PDMS-based devices in organic solvents greatly disrupts the micrometer-sized features and makes it impossible for fluids to flow inside the channels. Our approach to this problem has been to replace PDMS with photocurable perfluoropolyethers. Device fabrication and valve actuation were accomplished using established procedures for PDMS devices. The additional advantage of photocuring allows fabrication time to be decreased from several hours to a matter of minutes. The PFPE-based device exhibited mechanical properties similar to those of Sylgard 184 before and after curing as well as remarkable resistance to organic solvents. This work has the potential to expand the field of microfluidics to many novel applications.     

ToF‐SIMS and XPS surface characterization of novel perfluoropolyether–urethane ionomers from aqueous dispersions

In this work a new class of ionomeric block perfluropolyether (PFPE) polyurethanes are presented; these polymers are obtained in the form of aqueous dispersions due to the presence of hydrophilic sites (ionomeric groups such as acetates or trialkylammonium salts) along the macromolecular chain, offering the chance to combine PFPEs in a variety of possible structures for coating or surface treatments with an environmentally friendly use. X‐ray photoelectron spectroscopy analysis at two different sampling depths, as well as time‐of‐flight secondary ion mass spectrometry analysis modelled by the use of principal component analysis (PCA), were used to investigate the first nanometres of the surface samples. It resulted in a clear surface enrichment in fluorine, and the different extent of the fluorine stratification will be discussed in relation to the ionic character, film‐forming from water and cross‐linking. Copyright © 2003 John Wiley & Sons, Ltd.     

Optically transparent, amphiphilic networks based on blends of perfluoropolyethers and poly(ethylene glycol)

Amphiphilic networks of perfluoropolyethers (PFPE) and poly(ethylene glycol) (PEG) have been achieved to yield optically transparent, mechanically robust films over a wide range of compositions. Telechelic diols of these oligomers were transformed to a photocurable dimethacryloxy form (DMA) and free radically cured at various composition weight ratios to yield free-standing films. Clear and colorless amphiphilic networks could be achieved when low molar mass versions of both the PFPE-DMA (1 kg/mol) and the PEG-DMA (550 g/mol) were used. The bulk morphologies of the samples were extensively characterized by a variety of techniques including ultraviolet-visible spectroscopy, differential scanning calorimetry, dynamic mechanic thermal analysis, small-angle X-ray scattering, atomic force microscopy, X-ray photoelectron spectroscopy, and optical microscopy, which strongly suggest that nanoscopic to macroscopic phase-separated materials could be achieved. By incorporating a threshold amount of PFPEs into PEG-based hydrogel networks, water swelling could be significantly reduced, which may offer a new strategy for a number of medical device applications. Along these lines, strong inhibition of nonspecific protein adsorption could be achieved with these amphiphilic network materials compared with an oligo(ethylene glycol)-based self-assembled monolayer coated surface.     

Peroxidic perfluoropolyether for the covalent binding of perfluoropolyether chains on carbon black surface

Peroxidic perfluoropolyethers (PFPEs) are suitable tools for the covalent linkage of fluorinated groups on substrates containing aromatic moieties. Thus the thermal decomposition process of such fluorinated peroxides allowed the covalent linkage of PFPE radicals to the polycyclic aromatic structure of a graphitic carbon black. Contact angle measurements on molded pellets made with modified carbon black powders revealed a gradual enhancement of the hydrophobicity, which follows the increase of the fluorine content on the surface according to XPS experiments. BET analyses also revealed variations of the surface area of carbonaceous samples. Products and by-products were also evaluated by mass balances of decomposed portions of PFPE residues, respectively, PFPE chains bonded on carbon black and PFPE fluids obtained by homocoupling side-reactions. Modified carbonaceous materials were analyzed by solid state ¹⁹F-MAS NMR and the results are in agreement with the proposed radical mechanism.     

Activation of hydrocinnamic acids with pentafluorophenol versus pentafluorothiophenol: Reactivity towards hexylamine

In this work we describe and compare the synthesis of four new hexylamides of hydrocinnamic acids, namely hexylamide of hydrocinnamic, 3,4-dimethoxyhydrocinnamic, 4-hydroxy-3-methoxyhydrocinnamic and 3,4-dihydroxyhydrocinnamic acids via pentafluorophenyl esters (PFPEs) versus pentafluorophenyl thioesters (PFPTs) intermediates. It was found that the PFPE are the best intermediates for this kind of synthesis giving reactions with less by products, easier work-up, higher overall yields and with the best reactivity towards hexylamine. The X-ray structures of two PFPE are also reported.     

Noncovalent conformational locks in organic semiconductors

Highly planar conformation is considered to be one of the most important properties for high performance organic semiconductors. Among all kinds strategies for designing highly performing materials, noncovalent conformational locks(NCLs)have been widely used to increase the planarity and rigidity for π-conjugated systems. This review summarizes π-conjugated small molecules and polymers by employing various NCLs for controlling molecular conformation in the past two years. The optoelectronic properties of the conjugated materials, together with their applications on organic field-effect transistors(OFETs)and organic photovoltaics(OPVs) are discussed. Besides, the outlook and challenges in this field are also presented. It is obvious that NCLs play an important role in the design and synthesis of high-performance organic semiconductors.     

Liquid crystal elastomer actuators: Synthesis,alignment, and applications

Liquid crystal elastomers (LCEs) are a unique class of materials which combine rubber elasticity with the orientational order of liquid crystals. This combination can lead to materials with unique properties such as thermal actuation, anisotropic swelling, and soft elasticity. As such, LCEs are a promising class of materials for applications requiring stimulus response. These unique features and the recent developments of the LCE chemistry and processing will be discussed in this review. First, we emphasize several different synthetic pathways in conjunction with the alignment techniques utilized to obtain monodomain LCEs. We then identify the synthesis and alignment techniques used to synthesis LCE‐based composites. Finally, we discuss how these materials are used as actuators and sensors. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 395–411     

The Incorporation of Titania into Modified Silicates for Solar Photodegradation of Aqueous Species

A new class of sol-gel-derived photocatalytic materials has been synthesized and used in solar-assisted photodegradation studies. The materials are comprised of a homogeneous dispersion of commercial TiO₂ powder into silica and organically modified silicate (Ormosil) hosts. The efficiency of the photocatalytic properties of these TiO₂-containing materials was determined by their relative performance in the solar photodecomposition of aqueous rhodamine B. The improved adsorption properties of the modified materials compared to commercial TiO₂ increase the photodecomposition rate and the buoyancy properties, although excess hydrophobicity decreases the wetted section of the catalyst and its photocatalytic performance. These materials can be used as floatable catalysts for solar-assisted water purification.     

From two-dimensional materials to heterostructures

Graphene, hexagonal boron nitride, molybdenum disulphide, and layered transition metal dichalcogenides (TMDCs) represent a class of two-dimensional (2D) atomic crystals with unique properties due to reduced dimensionality. Stacking these materials on top of each other in a controlled fashion can create heterostructures with tailored properties that offers another promising approach to design and fabricate novel electronic devices. In this report, we attempt to review this rapidly developing field of hybrid materials. We summarize the fabrication methods for different 2D materials, the layer-by-layer growth of various vertical heterostructures and their electronic properties. Particular interests are given to in-situ stack aforementioned 2D materials in controlled sequences, and the TMDCs heterostructures.     

Vitrimers: directing chemical reactivity to control material properties

The development of more sustainable materials with a prolonged useful lifetime is a key requirement for a transition towards a more circular economy. However, polymer materials that are long-lasting and highly durable also tend to have a limited application potential for re-use. This is because such materials derive their durable properties from a high degree of chemical connectivity, resulting in rigid meshes or networks of polymer chains with a high intrinsic resistance to deformation. Once such polymers are fully synthesised, thermal (re)processing becomes hard (or impossible) to achieve without damaging the degree of chemical connectivity, and most recycling options quickly lead to a drop or even loss of material properties. In this context, both academic and industrial researchers have taken a keen interest in materials design that combines high degrees of chemical connectivity with an improved thermal (re)processability, mediated through a dynamic exchange reaction of covalent bonds. In particular vitrimer materials offer a promising concept because they completely maintain their degree of chemical connectivity at all times, yet can show a clear thermally driven plasticity and liquid behavior, enabled through rapid bond rearrangement reactions within the network. In the past decade, many suitable dynamic covalent chemistries were developed to create vitrimer materials, and are now applicable to a wide range of polymer matrices. The material properties of vitrimers, however, do not solely rely on the chemical structure of the polymer matrix, but also on the chemical reactivity of the dynamic bonds. Thus, chemical reactivity considerations become an integral part of material design, which has to take into account for example catalytic and cross-reactivity effects. This mini-review will aim to provide an overview of recent efforts aimed at understanding and controlling dynamic cross-linking reactions within vitrimers, and how directing this chemical reactivity can be used as a handle to steer material properties. Hence, it is shown how a focus on a fundamental chemical understanding can pave the way towards new sustainable materials and applications.

In this minireview, we survey recent advances in the development of vitrimer materials. Focus on how to chemically control their material properties is used to highlight challenges for boosting the potential of this emerging class of polymer materials.     

Hybrid and biohybrid layered double hydroxides for electrochemical analysis

Layered double hydroxides (LDH) are lamellar materials that have been extensively used as electrode modifiers. Nanostructured organic–inorganic materials can be designed by intercalation of organic or metallic complexes within the interlayer space of these materials or by the formation of composite materials based on biopolymers (alginate or chitosan) or biomolecules, such as enzymes. These hybrid or biohybrid materials have interesting properties applicable in electroanalytical devices. From an exhaustive review of the literature, the relevance of these hybrid and biohybrid LDH materials as electrode materials for electrochemical detection of species with an environmental or health impact is evaluated. The analytical characteristics (sensitivity and detection limit) of LDH-based amperometric sensors or biosensors are scrutinized.

Mechanical properties of hybrid inorganic-organic framework materials: establishing fundamental structure-property relationships

The mechanical properties of hybrid framework materials, including both nanoporous metal-organic frameworks (MOFs) and dense inorganic-organic frameworks, are discussed in this critical review. Although there are relatively few studies of this kind in the literature, major recent advances in this area are beginning to shed light on the fundamental structure-mechanical property relationships. Indeed research into the mechanical behavior of this important new class of solid-state materials is central to the design and optimal performance of a multitude of technological applications envisaged. In this review, we examine the elasticity of hybrid frameworks by considering their Young's modulus, Poisson's ratio, bulk modulus and shear modulus. This is followed by discussions of their hardness, plasticity, yield strength and fracture behavior. Our focus is on both experimental and computational approaches. Experimental work on single crystals and amorphized monoliths involved primarily the application of nanoindentation and atomic force microscopy to determine the elastic moduli and hardness properties. The compressibility and bulk moduli of single crystals and polycrystalline powders were studied by high-pressure X-ray crystallography in the diamond anvil cell, while in one instance spectroscopic ellipsometry has also been used to estimate the elastic moduli of MOF nanoparticles and deposited films. Theoretical studies, on the other hand, encompassed the application of first principles density-functional calculations and finite-temperature molecular dynamics simulations. Finally, by virtue of the diverse mechanical properties achievable in hybrid framework materials, we propose that a new domain be established in the materials selection map to define this emerging class of materials (137 references).     

Microscopical Structuring of Solids by Molecular Beam Epitaxy—Spatially Resolved Materials Synthesis

Interfaces and heterojunctions which are incorporated into a crystal in well-defined geometrical and spatial arrangements can lead to a structuring or engineering of (semiconducting) solids down to atomic dimensions. The electrical and optical properties are then defined locally, and phenomena related to extremely small dimensions (“quantum size effects”) become more important than the actual chemical properties of the materials used. The technique of molecular beam epitaxy allows an atomic layer-by-layer deposition in a two-dimensional growth process, and crystalline materials in alternating layers of arbitrary composition and only a few atomic layers thickness are formed. The synthesis of microscopically structured solids by molecular beam epitaxy affords access to a new class of materials with accurately tailored electrical, optical, magnetic, dielectric, mechanical etc. properties. The semiconductor and metal superlattices described in this article, which are made of alternating thin layers of two different materials, symbolize just the beginning of a new area of materials engineering on a molecular (or atomic) scale. This periodic modulation of the chemical composition normal to the surface imposes an artificial periodicity on the semiconductor or metal crystal, a periodicity of one or two orders of magnitude larger than its natural lattice spacing. The synthesis of other materials combinations, including semiconductor/metal, semiconductor/insulator, metal/insulator, polymers, and magnetic materials, with entirely different properties and for completely different applications will certainly follow. Finally, a large variety of desired combinations of elements can be selected, and even metastable compounds with novel exciting properties can be synthesized by molecular beam epitaxy.     

Metal–Organic Framework‐Activated Carbon Composite Materials for the Removal of Ammonia from Contaminated Airstreams

Metal–organic frameworks (MOFs) are a class of porous materials that show promise in the removal of toxic industrial chemicals (TICs) from contaminated airstreams, though their development for this application has so far been hindered by issues of water stability and the wide availability and low cost of traditionally used activated carbons. Here a series of three MOF‐activated carbon composite materials with different MOF to carbon ratios are prepared by growing STAM‐17‐OEt crystals inside the commercially available BPL activated carbon. The composite materials display excellent water stability and increased uptake of ammonia gas when compared to unimpregnated carbon. Such properties make these composites very promising in the fields of air purification and personal protective equipment.     

Electronic,Structural and Functional Versatility in Tetrathiafulvalene-Lanthanide Metal–Organic Frameworks

Tetrathiafulvalene-lanthanide (TTF-Ln) metal–organic frameworks (MOFs) are an interesting class of multifunctional materials in which porosity can be combined with electronic properties such as electrical conductivity, redox activity, luminescence and magnetism. Herein a new family of isostructural TTF-Ln MOFs is reported, denoted as MUV-5(Ln) (Ln=Gd, Tb, Dy, Ho, Er), exhibiting semiconducting properties as a consequence of the short intermolecular S⋅⋅⋅S contacts established along the chain direction between partially oxidised TTF moieties. In addition, this family shows photoluminescence properties and single-molecule magnetic behaviour, finding near-infrared (NIR) photoluminescence in the Yb/Er derivative and slow relaxation of the magnetisation in the Dy and Er derivatives. As such properties are dependent on the electronic structure of the lanthanide ion, the immense structural, electronic and functional versatility of this class of materials is emphasised.     

EPDM based heat shielding materials for Solid Rocket Motors: A comparative study of different fibrous reinforcements

EPDM/aramid ablatives represent the state of the art heat shielding materials for Solid Rocket Motors. Due to their mechanical properties and excellent thermal stability, aramid fibers or pulp constitute the common reinforcement of EPDM based liners. New generation organic fibers were recently tested as a potential replacement of aramid. In this study, Kynol fiber, a phenolic based reinforcement with high mechanical and thermal properties, was evaluated on this class of ablatives: to date, there are no data available on the use of Kynol fibers in EPDM based ablatives. At the same time, silica fibers which are traditionally used on other classes of ablatives, were also tested: in fact, the use of this type of reinforcement is not well documented on EPDM ablatives. It was found that EPDM/Kynol composition produced the char with the smaller dimensional change and the higher adhesion on the virgin material. EPDM/aramid exhibited the higher insulation properties. At the studied fiber percentage, EPDM/silica showed the worst behavior than the other formulations. The obtained data improved the comprehension of the role of the different fibers on the ablation mechanism of this class of ablatives, thus enabling the possibility to exploit their intrinsic properties.