Volumetric behaviour of binary and ternary liquid systems composed of ethanol, isooctane, and toluene at temperatures from (298.15 to 328.15) K. Experimental data and correlation

The densities and speeds of sound of (ethanol + isooctane), (ethanol + toluene), and (ethanol + isooctane + toluene) were measured at four temperatures over the range (298.15 to 328.15) K, and the respective values of excess volumes and adiabatic compressibility κ_S were calculated. The and κ_S values for the binary systems were fitted to the Redlich–Kister equation. The respective ternary data together with corresponding binary data were then fitted to the modified Redlich–Kister equation considering various numbers of ternary constants. It was found that even for the systems containing self-associating alcohol, only one ternary parameter is sufficient to describe well the ternary system.     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

Effect of temperature on the volumetric properties of (cyclohexanone + an aromatic hydrocarbon)

The excess molar volume of (cyclohexanone + benzene, or toluene, or ethylbenzene, or styrene) were obtained from the densities measured by means of a vibrating-tube densimeter over the whole composition range at temperatures (293.15, 303.15, 313.15, 323.15, 333.15, 343.15, 353.15) K and atmospheric pressure. The excess molar volume provide the temperature dependence of in the temperature range of (293 to 353) K. The results were correlated using the fourth-order Redlich-Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters. It was found that the in the systems studied increase with rising temperature.     

(p, Vm, T) measurements of (cyclohexane + nonane) at temperatures from 298.15 K to 328.15 K and at pressures up to 40 MPa

The densities and speeds of sound of (cyclohexane + nonane) were measured at four temperatures from 298.15 K to 328.15 K, and the respective values of excess volumes and adiabatic compressibility were calculated. Thereafter, the densities for the last system were measured at elevated pressures (0.1 to 40) MPa at four temperatures over the range 298.15 K to 328.15 K with a high-pressure apparatus. The high-pressure density data were fitted to the Tait equation and the isothermal compressibilities were calculated with a novel procedure with the aid of this equation. The low- and high-pressure values of calculated from the density data show that the deviations from ideal behaviour in the system decrease slightly as the temperature and pressure are raised. The data were fitted to the fourth-order Redlich-Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters.     

Synthesis and characterizations of well-defined dendrimer-like copolymers with the second and third generation based on polystyrene and poly(l-lactide)

Dendrimer-like copolymers with two and three generations, (polystyrene)₃-b-(poly(l-lactide))₆ (PSt₃-b-PLLA₆) and PSt₃-b-PLLA₆-b-PSt₁₂ have been successfully prepared using core-first method. The first step of this synthesis is the preparation of three-armed PSt by atom transfer radical polymerization (ATRP) of St using 1,1,1-tri(methylene-α-bromoisobutyryl)propane as initiator. Terminal divergence of the polymers obtained was achieved by the reaction of terminal bromines with branching agent, 2,2-dimethyl-1,3-dioxolane-4-methanol. After deprotection, the polymer with six terminal hydroxyl groups was used in the ring-opening polymerization of LLA. The dendrimer-like copolymer with PLLA as a second generation diverged continuously by the reaction of 6 terminal hydroxyl groups with branching agent, 2,2-bis(methylene-α-bromoisobutyryl)propionyl chloride. The resultant polymer with 12 terminal bromines was used as macroinitiator in the ATRP of St to produce the target dendrimer-like copolymer, PSt₃-b-PLLA₆-b-PSt₁₂. The structures of polymers obtained from each step were confirmed by their ¹H NMR spectra and GPC measurements. DSC results show one for the three-armed PSt, , and for the dendrimer-like copolymer with two generations, C(PSt(PLLA)₂)₃, and , and for the copolymer with three generations, C(PSt(PLLA(PSt)₂)₂)₃.     

Synthesis of star polystyrene by radical polymerization with 1,2,4,5-tetrakis(p-tert-butylphenyl selenomethyl)benzene as a novel photoiniferter

1,2,4,5-Tetrakis(p-tert-butylphenylselenomethyl)benzene was synthesized and used as a tetrafunctional photoiniferter for the polymerization of styrene. Both the yield and the number average molecular weight () of polymers increased with reaction time and linearly increased with yield of polymer. The polymerization of styrene using this novel photoiniferter permitted formation of star-shaped polystyrene containing arylseleno groups at the chain ends, and the average degree of functionality was 3.2. Photopolymerization of styrene with end-functional star polystyrene as polymeric photoiniferter afforded polystyrene having high molecular weight.     

Synthesis and NMR studies of 2- and 3-fluorosubstitued five-membered heterocycles

A set of 2-fluoro- and 3-fluoro-substituted thiophenes, pyrroles and furans has been synthesized by a treatment of the corresponding lithio derivatives with N-fluorodibenzenesulfonamide. For all these compounds, and coupling constants and NMR chemical shifts have been measured. In all cases, a dramatic increase of the couplings has been observed in 2-fluoro- and 3-fluoro-substituted compounds in comparison with those measured for the parent compounds. The same is valid for measured in 3-fluoro derivatives.The DFT calculations performed for 2- and 3-fluoro-substituted compounds reproduce very well the experimental coupling values and show that the Fermi contact contribution is the main factor determining their magnitude. Also the trends observed in the NMR shieldings are well reflected in the calculated DFT data.