[P3N3F5NS(O)Cl] and [{P4N4F6(NS(Cl)N)}2], the first chloro imino- and chloro bis(imino) sulfinates

In CH₃CN solution at −30 °C, [TAS]⁺[P₃N₃F₅NS(O)F]⁻ (2) is formed from TASF and P₃N₃F₅NSO, the compound readily decomposes to give P₃N₃F₆ and [TAS]⁺[NSO]⁻. [TAS]⁺[P₃N₃F₅NS(O)Cl]⁻ (3) and [TAS⁺]₂ [{P₄N₄F₆(NS(Cl)N)}₂]²⁻ (5) were prepared from TASCl and P₃N₃F₅NSO and 1,5-P₄N₄F₆(NSO)₂, respectively, and characterised by X-ray crystallography.     

[P4N4F8NMe2]− – An Aminophosphazenate Ion

TAS⁺[P₄N₄F₈NMe₂]^? ( 2 ) was prepared from TAS⁺[P₄N₄F₉]^? ( 1 ) via F/NMe₂ exchange using Me₃SiNMe₂. The salt was characterised by nmr‐spectroscopy and by X‐ray crystallography. The bonding situation in the anion is briefly discussed. The structural properties of the anion are compared with those of the starting material.     

New results in the ammonolysis of hexafluoro-cyclo-triphosphazene: Crystal structure of P3N3F5–NH–P3N3F4NH2

The reaction of hexafluoro-cyclo-triphosphazene P₃N₃F₆ with ammonia in acetonitrile has been studied. New compounds, (2-imino-2,4,4,6,6-pentafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-trienyl)-2-amino-4,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) and cis and trans isomers of non-gem-2,4-diamino-2,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₄(NH₂)₂ (4, 5)_, were detected by GC/MS, and ³¹P NMR spectroscopy in reaction mixtures. X-ray diffraction analysis of P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) revealed two conformational polymorphs, 2A and 2B, the latter being built up of two different conformers that were further denoted as 2B_a (the same as the single conformer in 2A) and 2B_b. The compound 2 was characterized by spectroscopic methods and its 2D potential energy surface (PES) was described by density functional theory computations depending on two dihedral angles. The calculated PES spans over 30 kJ/mol in energy including 8 local minima and all first and second order saddle points. The occurrence of the two experimentally observed conformers 2B_a and 2B_b seems to be governed by crystal packing effects.     

Alignment of acentric MoO3F3 anions in a polar material: (Ag3MoO3F3)(Ag3MoO4)Cl

(Ag₃MoO₃F₃)(Ag₃MoO₄)Cl was synthesized by hydro(solvato)thermal methods and characterized by single-crystal X-ray diffraction (P3m1, No. 156, Z=1, a=7.4488(6)Å, c=5.9190(7) Å). The transparent colorless crystals are comprised of chains of distorted fac-MoO₃F₃³⁻ octahedra and MoO₄²⁻ tetrahedra anions, as suggested by the formulas Ag₃MoO₃F₃ and Ag₃MoO₄⁺, and are connected through Ag⁺ cations in a polar alignment along the c-axis. One Cl⁻ anion per formula unit serves as a charge balance and connects the two types of chains in a staggered fashion, offset by . In MoO₄²⁻, the Mo atom displaces towards a single oxide vertex, and in MoO₃F₃³⁻, the Mo displaces towards the three oxide ligands. The ordered oxide-fluoride ligands on the MoO₃F₃³⁻ anion is important to prevent local inversion centers, while the polar organization is directed by the Cl⁻ anion and interchain dipole-dipole interactions. The dipole moments of MoO₃F₃³⁻ and MoO₄²⁻ align in the negative c-axis direction, to give a polar structure with no cancellation of the individual moments. The direction and magnitude of the dipole moments for MoO₃F₃³⁻ and MoO₄²⁻ were calculated from bond valence analyses and are 6.1 and 1.9 debye (10⁻¹⁸ esu cm) respectively, compared to 4.4 debye for polar NbO₆ octahedra in LiNbO₃, and 4.5 debye for polar TiO₆ octahedra in KTiOPO₄ (KTP).     

X-ray crystal structures and solution dynamics of sodium organofluorotitanates [Na{Ti2(C5Me5)2F7}] and [NaTi6(C5Me5)5F20(H2O)]·(THF)

[Na{Ti₂(C₅Me₅)₂F₇}] (1) was prepared from sodium fluoride and [{Ti(C₅Me₅)F₃}₂] [H.W. Roesky, et al., Angew. Chem. Int. Ed. Engl. 31 (1992) 864-866]. The solid-state 1 consists of a polymeric chain of two rows of dititanate anions [Ti₂(C₅Me₅)₂F₇]⁻ connected by sodium ions in the middle of the chain. Each sodium ion is coordinated by five fluorine atoms from three [Ti₂(C₅Me₅)₂F₇]⁻ anions. The variable-temperature ¹⁹F NMR of CD₃CN solution of 1 revealed interconversions of monomeric species [Na(CD₃CN)_n{Ti₂(C₅Me₅)₂F₇}] (1solv) with different number of CD₃CN ligands on the sodium ion. The addition of HMPA to the CD₃CN solution of 1 allows ¹⁹F NMR observation of 1·HMPA (1a) and 1·HMPA·CD₃CN (1b) in the slow exchange. The solid-state structure of [NaTi₆(C₅Me₅)₅F₂₀(H₂O)]·(THF) (2·THF) reveals the sodium ion coordinated by four fluorine atoms from the anion [Ti₂(C₅Me₅)₂F₇]⁻ and by three fluorine atoms from the cluster [Ti₄(C₅Me₅)₃F₁₃(H₂O)].     

Synthesis, vibrational and NMR spectroscopic characterization of [N(CH3)4][IO2F2] and X-ray crystal structure of [N(CH3)4]2[IO2F2][HF2]

The salt, [N(CH₃)₄][IO₂F₂], was prepared from [N(CH₃)₄][IO₃] and 49% aqueous HF, and characterized by Raman, infrared, and ¹⁹F NMR spectroscopy. Crystals of [N(CH₃)₄]₂[IO₂F₂][HF₂] were obtained by reduction of [N(CH₃)₄][cis-IO₂F₄] in the presence of [N(CH₃)₄][F] in CH₃CN solvent and were characterized by Raman spectroscopy and single-crystal X-ray diffraction: C2/m, a = 14.6765(2) Å, b = 8.60490(10) Å, c = 13.9572(2) Å, β = 120.2040(10)°, V = 1523.35(3) Å³, Z = 4 and R = 0.0192 at 210 K. The crystal structure consists of two IO₂⁻F₂ anions that are symmetrically bridged by two H⁻F₂ anions, forming a [F₂O₂I(FHF)₂IO₂F₂]⁴⁻ dimer. The symmetric bridging coordination for the H⁻F₂ anion in this structure represents a new bonding modality for the bifluoride anion.     

The relevancy of the [B2N4] substructure in the electronic structure of the metal-rich lanthanum nitridoborate La3(B2N4)

Lanthanoide nitridoborates of the general formula Ln₃(B₂N₄) with Ln=La, Ce, Pr, and Nd occur as black crystalline materials. Their structures contain oxalate-like [B₂N₄]⁸⁻ ions being stacked in an eclipsed formation along one crystallographic direction. Electronic structures were calculated for a molecular [B₂N₄]⁸⁻, for the [B₂N₄] partial structure, and for the complete La₃(B₂N₄) structure with the extended Hückel algorithm to analyze the bonding characteristics and to trace the necessity and properties of one surplus electron of (La³⁺)₃(B₂N₄⁸⁻)(e⁻). The HOMO of a [B₂N₄]⁸⁻ is B-B σ bonding, and the LUMO is B-B π bonding but B-N antibonding. The energy band of the solid state [B₂N₄] partial structure corresponding to the LUMO is broadened as a result of intermolecular B?B interactions between adjacent [B₂N₄] units along the stacking direction. Due to bonding interactions with La d orbitals, this band is significantly lowered in energy and occupied with one electron in the band structure of La₃(B₂N₄). This singly occupied band exhibits no band crossings but creates a semimetal-like band structure situation.     

π-facial interactions between Cl and [S4N3]. X-ray crystal structure of [S4N3]Cl

The X-ray structure of [S₄N₃]Cl reveals three independent molecules, which all display π-facial interactions between the Cl⁻ and the pseudo-aromatic [S₄N₃]⁺ rings to produce a structure containing “inverse sandwich” systems.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

Enantiomer separation of rac-2,2′-dihydroxy-1,1′-binaphthyl (BNO) by inclusion complexation with racemic or achiral ammonium salts and a novel transformation of a 1:1:1 racemic complex of BNO, Me4N·Cl and MeOH into a conglomerate complex in the solid state

The complete simultaneous and mutual enantiomer resolution of 2,2′-dihydroxy-1,1′-binaphthyl (BNO) and N-(3-chloro-2-hydroxypropyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH(OH)CH₂Cl·Cl⁻ into their enantiomers by inclusion complexation between their racemates in EtOH in the presence of a chiral seed crystal is reported. The enantiomer resolution of the rac-BNO was also accomplished easily by inclusion complexation with achiral ammonium salts, N-(2-hydroxyethyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH₂OH·Cl⁻ and tetramethylammonium chloride, Me₄N⁺·Cl⁻. Inclusion complexation of the rac-BNO with Me₃N⁺ CH₂CH₂OH·Cl⁻ gave only a 1:1 conglomerate inclusion complex but not a racemic complex. Recrystallization of the rac-BNO and an equimolar amount of Me₄N⁺·Cl⁻ from MeOH (7 ml) and MeOH (15 ml) gave a 1:1:1 racemic complex, BNO·Me₄N⁺·Cl⁻·MeOH and a 1:1 conglomerate complex, BNO·Me₄N⁺·Cl⁻, respectively. Novel transformation of the former racemate into the latter conglomerate occurred by heating or by exposure to MeOH vapor in the solid state.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

A widely varying range of products in reactions of C6F5BrF2, C6F5IF2, and C6F5IF4 with Lewis acids of different strength

The relative fluoride donor ability: C₆F₅BrF₂ > C₆F₅IF₂ > C₆F₅IF₄ was outlined from reactions with Lewis acids of graduated strength in different solvents. Fluoride abstraction from C₆F₅HalF₂ with BF₃·NCCH₃ in acetonitrile (donor solvent) led to [C₆F₅HalF·(NCCH₃)_n][BF₄]. The attempted generation of [C₆F₅BrF]⁺ from C₆F₅BrF₂ and anhydrous HF or BF₃ in weakly coordinating SO₂ClF gave C₆F₅Br besides bromoperfluorocycloalkenes C₆BrF₇ and 1-BrC₆F₉. In reactions of C₆F₅IF₂ with SbF₅ in SO₂ClF the primary observed intermediate (¹⁹F NMR, below 0 °C) was the 4-iodo-1,1,2,3,5,6-hexafluorobenzenium cation, which converted into C₆F₅I and 1-IC₆F₉ at 20 °C. The reaction of C₆F₅IF₄ with SbF₅ in SO₂ClF below −20 °C gave the cation [C₆F₅IF₃]⁺ which decomposed at 20 °C to C₆F₅I, 1-iodoperfluorocyclohexene, and iodoperfluorocyclohexane. Principally, the related perfluoroalkyl compound C₆F₁₃IF₄ showed a different type of products in the fast reaction with AsF₅ in CCl₃F (−60 °C) which resulted in C₆F₁₄. Intermediate and final products of C₆F₅HalF_n−1 (n = 3, 5) with Lewis acids were characterized by NMR in solution. Stable solid products were isolated and analytically characterized.     

Chemistry in fuming nitric acids—I. NMR spectroscopic study of PF5, HPO2F2 and P4O10 in the solvent system 44 wt.% N2O4 in 100% HNO3

³¹P and ¹⁹F NMR spectroscopy has been used to elucidate the nature of the interaction of PF₅, HPO₂F₂ and P₄O₁₀ with the solvent system 44 wt.% N₂O₄ in 100% HNO₃ (“High Density Acid”, HDA). PF₅ generates the species PF₆^?, HPO₂F₂ and HF (with some H₂PO₃F present as a minor product). HPO₂F₂ gives rise to H₂PO₃F and HF (with smaller amounts of PF₆ also present). The ³¹P NMR spectrum of P₄O₁₀ in HDA exhibits four resonances assigned to P(OH)₄⁺, H₄P₂O₇, (HPO₃)₄ and a mixture of cyclic and branched phosphoric acids, respectively.     

Xα scattered wave calculations of the ionisation energies of N3P3F6 and N4P4F8

Ionisation energies have been calculated for N₃P₃F₆ and N₄P₄F₈ with the overlapping sphere version of the Xα scattered wave method and with the inclusion of a vacacy sphere for the interior of each PN ring. Experimental energies are calculated to within 1 eV on average for both sets of calculations, but the spacings of the levels are reproduced better with the vacancy sphere model.     

Anodic oxidation of organometallic sandwich complexes using [Al(OC(CF3)3)4] or [AsF6] as the supporting electrolyte anion

Anodic voltammetry and electrolysis of the metallocenes ferrocene, ruthenocene, and nickelocene have been studied in dichloromethane containing two different fluorine-containing anions in the supporting electrolyte. The perfluoroalkoxyaluminate anion [Al(OC(CF₃)₃)₄]⁻ has very low nucleophilicity, as shown by its inertness towards the strong electrophile [RuCp₂]⁺ and by computation of its electrostatic potential in comparison to other frequently used electrolyte anions. The low ion-pairing ability of this anion was shown by the large spread in E_1/2 potentials (ΔE_1/2 = 769 mV) for the two one-electron oxidations of bis(fulvalene)dinickel. The hexafluoroarsenate anion [AsF₆]⁻, on the other hand, reacts rapidly with the ruthenocenium ion and is much more strongly ion-pairing towards oxidized bis(fulvalene)dinickel (ΔE_1/2 = 492 mV). In terms of applications of these two anions to the anodic oxidation of organometallic sandwich complexes, the behavior of [Al(OC(CF₃)₃)₄]⁻ is similar to that of other weakly-coordinating anions such as [B(C₆F₅)₄]⁻, whereas that of [AsF₆]⁻ is similar to the more traditional electrolyte anions such as [PF₆]⁻ and [BF₄]⁻. Additionally, the synthesis and crystal structure of [Cp₂Fe][Al(OC(CF₃)₃)₄] are reported.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Understanding the role of an easy-to-prepare aldimine-alkyne carboamination catalyst, [Ti(NMe2)3(NHMe2)][B(C6F5)4]

A series of reactivity studies of the carboamination pre-catalyst [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] as well as the preparation of other catalysts are reported in this work. Treatment of [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] with the aldimines Ar′NCHtol (Ar′ = 2,6-Me₂C₆H₃, tol = 4-MeC₆H₄), and depending on the reaction conditions, results in isolation of [Me₂NCHR′][B(C₆F₅)₄] (1) or (Me₂N)₂CHtol, as well as the asymmetric titanium dimer [(Me₂N)₂(HNMe₂)Ti(μ₂-N[2,6-Me₂C₆H₃])₂Ti(NHMe₂)(NMe₂)][B(C₆F₅)₄] (2). Protonation of CpTi(NMe₂)₃ and Cp^∗Ti(NMe₂)₃ results in isolation of the salts, [CpTi(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (3) and [Cp^∗Ti(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (4), respectively. Treatment of compounds 3 or 4 with H₂N[2,6-ⁱPr₂C₆H₃] results in formation of the imido salts [CpTi(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (5) (58% yield) or [Cp^∗Ti(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (6). When Ti(NMe₂)₄ is treated with [Et₃Si][B(C₆F₅)₄], the salt [Ti(NMe₂)₃(N[SiEt₃]Me₂)][B(C₆F₅)₄] (7) is obtained, and treatment of the latter with [2,6-ⁱPr₂C₆H₃]NCHtol produces the imine adduct [Ti(NMe₂)₃(κ¹-[2,6-ⁱPr₂C₆H₃]NCHtol)][B(C₆F₅)₄] (8). The carboamination catalytic activity of complexes 2-7 was investigated and compared to [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄]. Likewise, a proposed mechanism to the active carboamination catalyst stemming from [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] is described.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

Quenched electrochemiluminescence of Ag nanoparticles functionalized g-C3N4 by ferrocene for highly sensitive immunosensing

In this paper, a novel sandwich electrochemiluminescence (ECL) immunosensor was constructed by ferrocene for quenching Ag nanoparticles functionalized g-C₃N₄ (Ag@g-C₃N₄) emission. The prepared Ag@g-C₃N₄ had strong and stable ECL signals compared to pure g-C₃N₄ and primary antibody (Ab₁) can be immobilized on Ag@g-C₃N₄ by adsorption of Ag nanoparticles. Ferrocene carboxylic acid (Fc-COOH) labeled secondary antibody was immobilized on Au doped mesoporous Al₂O₃ nanorods (Au@Al₂O₃–Fc-COOH@Ab₂) as labels through adsorption ability of Au toward proteins. After a sandwich-type immunoreaction, a remarkable decrease of ECL signal was observed due to the ECL quenching of Ag@g-C₃N₄ by Au@Al₂O₃–Fc-COOH@Ab₂. As a result, the change of ECL intensity has a direct relationship with the logarithm of CEA concentrations in the range of 1 pg mL⁻¹–100 ng mL⁻¹ with a detection limit of 0.35 pg mL⁻¹ (S/N = 3). Additionally, the proposed immunosensor shows high specificity, good reproducibility, and long-term stability.