共查询到20条相似文献,搜索用时 10 毫秒
1.
Printed electronics have recently attracted extensive attention due to their superior productivity to conventional semiconductor fabrication methods. To develop printing devices optimized for printed electronics, numerical studies on ink flows are often necessary, and, therefore, it is critical to provide accurate ink properties for reliable numerical results. However, it is difficult to find such data in literature since inks for printed electronics contains conductive metallic nanoparticles and they are not only non-Newtonian but expensive. Thus, we propose utilizing a microfluidic chip to investigate rheological properties of conductive inks. By using micro particle image velocimeter along with an immersion oil technique, we examine the flow characteristics of two commercial conductive inks containing Ag nanoparticles on microfluidic chips. We found that the ink flows show a stronger shear-thinning behavior as the Ag content increases. Finally, suitable rheological models applicable to numerical simulations for those inks are suggested after comparing the experimental data to frequently used rheological models. 相似文献
2.
《力学快报》2022,12(3):100341
Flexible piezoelectric energy harvesters (PEHs) have gained lots of attention in recent years, because of their potential biomechanical applications, such as powering implantable devices. Several in vivo animal experiments have demonstrated that the output power of a flexible PEH varies remarkably with patching orientations and locations, but the underlying mechanism remains unclear yet. Herein, an electromechanical model for a flexible PEH installed on a beating heart is proposed, and a concise relationship between the output power of the device and myocardium strain is established. The results demonstrate that the patching orientations have a significant impact on the output power of the PEH, and the optimal patching orientations for all patching locations are approximately 15–20 degree for PEHs mounted on the left ventricle. The simple theoretical method provided here would be universally effective for choosing the optimal patching locations and orientations of flexible PEHs installed on a nonhomogeneous deformed surface. 相似文献
3.
Hae.Chang.Gea 《Acta Mechanica Sinica》2011,27(5):730-737
Converting ambient vibration energy into electrical energy by using piezoelectric energy harvester has attracted a lot of interest in the past few years.In this paper,a topology optimization based method is applied to simultaneously determine the optimal layout of the piezoelectric energy harvesting devices and the optimal position of the mass loading.The objective function is to maximize the energy harvesting performance over a range of vibration frequencies.Pseudo excitation method (PEM) is adopted to analyze structural stationary random responses,and sensitivity analysis is then performed by using the adjoint method.Numerical examples are presented to demonstrate the validity of the proposed approach. 相似文献
4.
5.
There is promise in the use of bistable devices to transduce ambient vibrations into electrical power. However, it is critical to sustain the relatively large amplitude snap-through motion, or interwell motion, to significantly improve the responsiveness of bistable devices as compared to linear resonance-based approaches. This work posits that relatively stiff structural elements can be placed in the vicinity of the equilibria of bistable devices such that the discontinuous change in dynamics will tend to eject an otherwise small amplitude motion into the large amplitude interwell orbit that is to be preferred for energy harvesting applications. The discontinuous nonlinear dynamic equations of motion are derived and a proxy system parametrically studied. These numerical studies demonstrate that discontinuous nonlinear bistable devices have a significantly broadened frequency range that elicits the large amplitude snap through behavior. It is also seen that interwell motion is achievable at significantly reduced excitation amplitudes through these discontinuous structural elements. 相似文献
6.
A stochastic averaging technique for the nonlinear vibration energy harvesting system to Gaussian white noise excitation is developed to analytically evaluate the mean-square electric voltage and mean output power. By introducing the generalized harmonic transformation, the influence of the external circuit on the mechanical system is equivalent to a quasi-linear stiffness and a quasi-linear damping with energy-dependent coefficients, and then the equivalent nonlinear system with respect to the mechanical states is completely established. The Itô stochastic differential equation with respect to the mechanical energy of the equivalent nonlinear system is derived through the stochastic averaging technique. Solving the associated Fokker–Plank–Kolmogorov equation yields the stationary probability density of the mechanical states, and then the mean-square electric voltage and mean output power are analytically obtained through the approximate relation between the electric quantity and the mechanical states. The agreements between the analytical results and those from the moment method and from Monte Carlo simulations validate the effectiveness of the proposed technique. 相似文献
7.
Nonlinear Dynamics - The concept of simultaneous energy harvesting and vibration suppression has made tremendous progress in the past few years. However, the energy harvesting and vibration... 相似文献
8.
Interplay between phononic bandgaps and piezoelectric microstructures for energy harvesting 总被引:1,自引:0,他引:1
The paper introduces a multifunctional structural design combining superior mechanical wave filtering properties and energy harvesting capabilities. The proposed concept is based on the ability of most periodic structures to forbid elastic waves from propagating within specific frequency ranges known as phononic bandgaps. The bandgap density and the resulting filtering effect are dramatically enhanced through the introduction of a microstructure consisting of stiff inclusions which resonate at specific frequencies and produce significant strain and energy localization. Energy harvesting is achieved as a result of the conversion of the localized kinetic energy into electrical energy through the piezoelectric effect featured by the material in the microstructure. The idea is illustrated through the application to hexagonal truss-core honeycombs featuring periodically distributed stiff cantilever beams provided with piezoelectric electrodes. The multifunctional capability results from the localized oscillatory phenomena exhibited by the cantilevers for excitations falling in the neighborhood of the bending fundamental frequencies of the beams. This application is of particular interest for advanced aerospace and mechanical engineering applications where distinct capabilities are simultaneously pursued and weight containment represents a critical design constraint. The scalability of the analysis suggests the possibility to miniaturize the design to the microscale for microelectromechanical systems (MEMS) applications such as self-powered microsystems and wireless sensors. 相似文献
9.
This paper explores a clearance-type nonlinear energy sink (NES) for increasing electrical energy harvested from non-stationary mechanical waves, such as those encountered during impact and intermittent events. The key idea is to trap energy in the NES such that it can be harvested over a time period longer than that afforded by the passing disturbance itself. Analytical, computational, and experimental techniques are employed to optimize the energy sink, explore qualitative behavior (to include bifurcations), and verify enhanced performance. Unlike traditionally studied single-DOF NESs, both subdomains of the NES (i.e., on either side of the clearance) contain displaceable degrees of freedom, increasing the complexity of the analytical solution approach. However, closed-form solutions are found which quantify the relationship between the impact amplitude and the energy produced, parameterized by system properties such as the harvester effective resistance, the clearance gap, and the domain mass and stiffness. Bifurcation diagrams and trends therein provide insight into the number and state of impact events at the NES as excitation amplitude increases. Moreover, a closed-form Poincaré map is derived which maps one NES impact location to the next, greatly simplifying the analysis while providing an important tool for follow-on bifurcation studies. Finally, a series of representative experiments are carried out to realize the benefits of using clearance-type nonlinearities to trap wave energy and increase the net harvested energy. 相似文献
10.
11.
Nonlinear Dynamics - This paper is concerned with the chaotic dynamics of a rotating pendulum system with bistable characteristics subjected to a viscous damping and a harmonic forcing. As a... 相似文献
12.
13.
Nonlinear Dynamics - We consider the theoretical maximum extractable average power from an energy harvesting device attached to a vibrating table which provides a unidirectional displacement... 相似文献
14.
15.
16.
Wing flapping and morphing can be very beneficial to managing the weight of micro air vehicles through coupling the aerodynamic forces with stability and control. In this letter, harvesting energy from the wing morphing is studied to power cameras, sensors, or communication devices of micro air vehicles and to aid in the management of their power. The aerodynamic loads on flapping wings are simulated using a three-dimensional unsteady vortex lattice method. Active wing shape morphing is considered to enhance the performance of the flapping motion. A gradient-based optimization algorithm is used to pinpoint the optimal kinematics maximizing the propellent efficiency. To benefit from the wing deformation, we place piezoelectric layers near the wing roots. Gauss law is used to estimate the electrical harvested power. We demonstrate that enough power can be generated to operate a camera. Numerical analysis shows the feasibility of exploiting wing morphing to harvest energy and improving the design and performance of micro air vehicles. 相似文献
17.
Leveraging circuit theory and nonlinear dynamics for the efficiency improvement of energy harvesting
Nonlinear Dynamics - The Hopf–Hopf bifurcations of an aircraft nose landing gear model are investigated in this paper based on two pairs of continuation parameters. It is shown that due to... 相似文献
18.
We investigate the potential of using a piezoelectric energy harvester to concurrently harness energy from base excitations and vortex-induced vibrations. The harvester consists of a multilayered piezoelectric cantilever beam with a circular cylinder tip mass attached to its free end which is placed in a uniform air flow and subjected to direct harmonic excitations. We model the fluctuating lift coefficient by a van der Pol wake oscillator. The Euler–Lagrange principle and the Galerkin procedure are used to derive a nonlinear distributed-parameter model for a harvester under a combination of vibratory base excitations and vortex-induced vibrations. Linear and nonlinear analyses are performed to investigate the effects of the electrical load resistance, wind speed, and base acceleration on the coupled frequency, electromechanical damping, and performance of the harvester. It is demonstrated that, when the wind speed is in the pre- or post-synchronization regions, its associated electromechanical damping is increased and hence a reduction in the harvested power is obtained. When the wind speed is in the lock-in or synchronization region, the results show that there is a significant improvement in the level of the harvested power which can attain 150 % compared to using two separate harvesters. The results also show that an increase of the base acceleration results in a reduction in the vortex-induced vibrations effects, an increase of the difference between the resonant excitation frequency and the pull-out frequency, and a significant effects associated with the quenching phenomenon. 相似文献
19.
20.
A bimorph piezoelectric beam with periodically variable cross-sections is used for the vibration energy harvesting. The effects of two geometrical parameters on the first band gap of this periodic beam are investigated by the generalized differential quadrature rule (GDQR) method. The GDQR method is also used to calculate the forced vibration response of the beam and voltage of each piezoelectric layer when the beam is subject to a sinusoidal base excitation. Results obtained from the analytical method are compared with those obtained from the finite element simulation with ANSYS, and good agreement is found. The voltage output of this periodic beam over its first band gap is calculated and compared with the voltage output of the uniform piezoelectric beam. It is concluded that this periodic beam has three advantages over the uniform piezoelectric beam, i.e., generating more voltage outputs over a wide frequency range, absorbing vibration, and being less weight. 相似文献