Synthetic and structural studies on [Fe2(SR)2(CN)x(CO)6-x](x-) as active site models for Fe-only hydrogenases.

A series of models for the active site (H-cluster) of the iron-only hydrogenase enzymes (Fe-only H2-ases) were prepared. Treatment of MeCN solutions of Fe2(SR)2(CO)6 with 2 equiv of Et4NCN gave [Fe2(SR)2(CN)2(CO)4](2-) compounds. IR spectra of the dicyanides feature four nu(CO) bands between 1965 and 1870 cm(-1) and two nu(CN) bands at 2077 and 2033 cm(-1). For alkyl derivatives, both diequatorial and axial-equatorial isomers were observed by NMR analysis. Also prepared were a series of dithiolate derivatives (Et4N)2[Fe2(SR)2(CN)2(CO)4], where (SR)2 = S(CH2)2S, S(CH2)3S. Reaction of Et4NCN with Fe2(S-t-Bu)2(CO)6 gave initially [Fe2(S-t-Bu)2(CN)2(CO)4](2-), which comproportionated to give [Fe2(S-t-Bu)2(CN)(CO)5](-). The mechanism of the CN(-)-for-CO substitution was probed as follows: (i) excess CN(-) with a 1:1 mixture of Fe2(SMe)2(CO)6 and Fe2(SC6H4Me)2(CO)6 gave no mixed thiolates, (ii) treatment of Fe2(S2C3H6)(CO)6 with Me3NO followed by Et4NCN gave (Et4N)[Fe2(S2C3H6)(CN)(CO)5], which is a well-behaved salt, (iii) treatment of Fe2(S2C3H6)(CO)6 with Et4NCN in the presence of excess PMe3 gave (Et4N)[Fe2(S2C3H6)(CN)(CO)4(PMe3)] much more rapidly than the reaction of PMe3 with (Et4N)[Fe2(S2C3H6)(CN)(CO)5], and (iv) a competition experiment showed that Et4NCN reacts with Fe2(S2C3H6)(CO)6 more rapidly than with (Et4N)[Fe2(S2C3H6)(CN)(CO)5]. Salts of [Fe2(SR)2(CN)2(CO)4](2-) (for (SR)2 = (SMe)2 and S2C2H4) and the monocyanides [Fe2(S2C3H6)(CN)(CO)5](-) and [Fe2(S-t-Bu)2(CN)(CO)5](-) were characterized crystallographically; in each case, the Fe-CO distances were approximately 10% shorter than the Fe-CN distances. The oxidation potentials for Fe2(S2C3H6)(CO)4L2 become milder for L = CO, followed by MeNC, PMe3, and CN(-); the range is approximately 1.3 V. In water,oxidation of [Fe2(S2C3H6)(CN)2(CO)4](2-) occurs irreversibly at -0.12 V (Ag/AgCl) and is coupled to a second oxidation.     

Catalysis of H(2)/D(2) scrambling and other H/D exchange processes by [Fe]-hydrogenase model complexes

Protonation of the [Fe]-hydrogenase model complex (mu-pdt)[Fe(CO)(2)(PMe(3))](2) (pdt = SCH(2)CH(2)CH(2)S) produces a species with a high field (1)H NMR resonance, isolated as the stable [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+)[PF(6)](-) salt. Structural characterization found little difference in the 2Fe2S butterfly cores, with Fe.Fe distances of 2.555(2) and 2.578(1) A for the Fe-Fe bonded neutral species and the bridging hydride species, respectively (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Yarbrough, J. C.; Darensbourg, M. Y. J. Am. Chem. Soc. 2001, 123, 9710). Both are similar to the average Fe.Fe distance found in structures of three Fe-only hydrogenase active site 2Fe2S clusters: 2.6 A. A series of similar complexes (mu-edt)-, (mu-o-xyldt)-, and (mu-SEt)(2)[Fe(CO)(2)(PMe(3))](2) (edt = SCH(2)CH(2)S; o-xyldt = SCH(2)C(6)H(4)CH(2)S), (mu-pdt)[Fe(CO)(2)(PMe(2)Ph)](2), and their protonated derivatives likewise show uniformity in the Fe-Fe bond lengths of the neutral complexes and Fe.Fe distances in the cationic bridging hydrides. The positions of the PMe(3) and PMe(2)Ph ligands are dictated by the orientation of the S-C bonds in the (mu-SRS) or (mu-SR)(2) bridges and the subsequent steric hindrance of R. The Fe(II)(mu-H)Fe(II) complexes were compared for their ability to facilitate H/D exchange reactions, as have been used as assays of H(2)ase activity. In a reaction that is promoted by light but inhibited by CO, the [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) complex shows H/D exchange activity with D(2), producing [(mu-D)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) in CH(2)Cl(2) and in acetone, but not in CH(3)CN. In the presence of light, H/D scrambling between D(2)O and H(2) is also promoted by the Fe(II)(mu-H)Fe(II) catalyst. The requirement of an open site suggests that the key step in the reactions involves D(2) or H(2) binding to Fe(II) followed by deprotonation by the internal hydride base, or by external water. As indicated by similar catalytic efficiencies of members of the series, the nature of the bridging thiolates has little influence on the reactions. Comparison to [Fe]H(2)ase enzyme active site redox levels suggests that at least one Fe(II) must be available for H(2) uptake while a reduced or an electron-rich Fe(I)Fe(I) metal-metal bonded redox level is required for proton uptake.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Reactivity of Mo(PMe3)6 towards benzothiophene and selenophenes: new pathways relevant to hydrodesulfurization

Mo(PMe(3))(6) cleaves a C-S bond of benzothiophene to give (kappa(2)-CHCHC(6)H(4)S)Mo(PMe(3))(4), which rapidly isomerizes to the olefin-thiophenolate and 1-metallacyclopropene-thiophenolate complexes, (kappa(1),eta(2)-CH(2)CHC(6)H(4)S)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)) and (kappa(1),eta(2)-CH(2)CC(6)H(4)S)Mo(PMe(3))(4). The latter two molecules result from a series of hydrogen transfers and are differentiated according to whether the termini of the organic fragments coordinate as olefin or eta(2)-vinyl ligands, respectively. The reactions between Mo(PMe(3))(6) and selenophenes proceed differently from those of the corresponding thiophenes. For example, whereas Mo(PMe(3))(6) reacts with thiophene to give eta(5)-thiophene and butadiene-thiolate complexes, (eta(5)-C(4)H(4)S)Mo(PMe(3))(3) and (eta(5)-C(4)H(5)S)Mo(PMe(3))(2)(eta(2)-CH(2)PMe(2)), selenophene affords the metallacyclopentadiene complex [(kappa(2)-C(4)H(4))Mo(PMe(3))(3)(Se)](2)[Mo(PMe(3))(4)] in which the selenium has been completely abstracted from the selenophene moiety. Likewise, in addition to (kappa(1),eta(2)-CH(2)CC(6)H(4)Se)Mo(PMe(3))(4) and (kappa(1),eta(2)-CH(2)CHC(6)H(4)Se)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)), which are counterparts of the species observed in the benzothiophene reaction, the reaction of Mo(PMe(3))(6) with benzoselenophene yields products resulting from C-C coupling, namely [kappa(2),eta(4)-Se(C(6)H(4))(CH)(4)(C(6)H(4))Se]Mo(PMe(3))(2) and [mu-Se(C(6)H(4))(CH)C(CH)(2)(C(6)H(4))](mu-Se)[Mo(PMe(3))(2)][Mo(PMe(3))(2)H].     

Thermodynamic hydride donor abilities of [HW(CO)4L]- complexes (L = PPh3, P(OMe)3, CO) and their reactions with [C5Me5Re(PMe3)(NO)(CO)]+

The thermodynamic hydride donor abilities of [HW(CO)(5)](-) (40 kcal/mol), [HW(CO)(4)P(OMe(3))](-) (37 kcal/mol), and [HW(CO)(4)(PPh(3))](-) (36 kcal/mol) have been measured in acetonitrile by either equilibrium or calorimetric methods. The hydride donor abilities of these complexes are compared with other complexes for which similar thermodynamic measurements have been made. [HW(CO)(5)](-), [HW(CO)(4)P(OMe(3))](-), and [HW(CO)(4)(PPh(3))](-) all react rapidly with [CpRe(PMe(3))(NO)(CO)](+) to form dinuclear intermediates with bridging formyl ligands. These intermediates slowly form [CpRe(PMe(3))(NO)(CHO)] and [W(CO)(4)(L)(CH(3)CN)]. The structure of cis-[HW(CO)(4)(PPh(3))](-) has been determined and has the expected octahedral structure. The hydride ligand bends away from the CO ligand trans to PPh(3) and toward PPh(3).     

The Interaction of C60, C70, and C60(CN)2 radical anions with cobalt(II) tetraphenylporphyrin in solid multicomponent complexes

A method for the synthesis of the multicomponent ionic complexes: [Cr(I)(C(6)H(6))(2) (.+)][Co(II)(tpp)(fullerene)(-)].C(6)H(4)Cl(2), comprising bis(benzene)chromium (Cr(C(6)H(6))(2)), cobalt(II) tetraphenylporphyrin (Co(II)(tpp)), fullerenes (C(60), C(60)(CN)(2), and C(70)), and o-dichlorobenzene (C(6)H(4)Cl(2)) has been developed. The monoanionic state of the fullerenes has been proved by optical absorption spectra in the UV/vis/NIR and IR ranges. The crystal structures of the ionic [[Cr(I)(C(6)H(6))(2)](.+)](1.7)[[Co(II)(tpp)(C(60))](2)](1.7-). 3.3 C(6)H(4)Cl(2) and [[Cr(I)(C(6)H(6))(2)] (.+)](2)[Co(II)(tpp)[C(60)(CN)(2)]](-)[C(60)(CN)(2) (.-)]).3 C(6)H(4)Cl(2) are presented. The essentially shortened Co.C(fullerene) bond lengths of 2.28-2.32 A in these complexes indicate the formation of sigma-bonded [Co(II)(tpp)][fullerene](-) anions, which are diamagnetic. All the ionic complexes are semiconductors with room temperature conductivity of 2 x 10(-3)-4 x 10(-6) S cm(-1), and their magnetic susceptibilities show Curie-Weiss behavior. The neutral complexes of Co(II)(tpp) with C(60), C(60)(CN)(2), C(70), and Cr(0)(C(6)H(6))(2), as well as the crystal structures of [Co(II)(tpp)](C(60)).2.5 C(6)H(4)Cl(2), [Co(II)(tpp)](C(70)). 1.3 CHCl(3).0.2 C(6)H(6), and [Cr(0)(C(6)H(6))(2)][Co(II)(tpp)] are discussed. In contrast to the ionic complexes, the neutral ones have essentially longer Co.C(fullerene) bond lengths of 2.69-2.75 A.     

Nitrosyl derivatives of diiron(I) dithiolates mimic the structure and Lewis acidity of the [FeFe]-hydrogenase active site

This study probes the impact of electronic asymmetry of diiron(I) dithiolato carbonyls. Treatment of Fe2(S2C(n)H(2n))(CO)(6-x)(PMe3)x compounds (n = 2, 3; x = 1, 2, 3) with NOBF4 gave the derivatives [Fe2(S2C(n)H(2n))(CO)(5-x)(PMe3)x(NO)]BF4, which are electronically unsymmetrical because of the presence of a single NO(+) ligand. Whereas the monophosphine derivative is largely undistorted, the bis(PMe3) derivatives are distorted such that the CO ligand on the Fe(CO)(PMe3)(NO)(+) subunit is semibridging. Two isomers of [Fe2(S2C3H6)(CO)3(PMe3)2(NO)]BF4 were characterized spectroscopically and crystallographically. Each isomer features electron-rich Fe(CO)2PMe3 and electrophilic Fe(CO)(PMe3)(NO)(+) subunits. These species are in equilibrium with an unobserved isomer that reversibly binds CO (DeltaH = -35 kJ/mol, DeltaS = -139 J mol(-1) K(-1)) to give the symmetrical adduct [Fe2(S2C3H6)(mu-NO)(CO)4(PMe3)2]BF4. In contrast to Fe2(S2C3H6)(CO)4(PMe3)2, the bis(PMe3) nitrosyl complexes readily undergo CO substitution to give the (PMe3)3 derivatives. The nitrosyl complexes reduce at potentials that are approximately 1 V milder than their carbonyl counterparts. Results of density functional theory calculations, specifically natural bond orbital analysis, reinforce the electronic resemblance of the nitrosyl complexes to the corresponding mixed-valence diiron complexes. Unlike other diiron dithiolato carbonyls, these species undergo reversible reductions at mild potentials. The results show that the novel structural and chemical features associated with mixed-valence diiron dithiolates (the so-called H(ox) models) can be replicated in the absence of mixed-valency by the introduction of electronic asymmetry.     

Chelate control of diiron(I) dithiolates relevant to the [Fe-Fe]- hydrogenase active site

The reaction of Fe2(S2C2H4)(CO)6 with cis-Ph2PCH=CHPPh2 (dppv) yields Fe2(S2C2H4)(CO)4(dppv), 1(CO)4, wherein the dppv ligand is chelated to a single iron center. NMR analysis indicates that in 1(CO)4, the dppv ligand spans axial and basal coordination sites. In addition to the axial-basal isomer, the 1,3-propanedithiolate and azadithiolate derivatives exist as dibasal isomers. Density functional theory (DFT) calculations indicate that the axial-basal isomer is destabilized by nonbonding interactions between the dppv and the central NH or CH2 of the larger dithiolates. The Fe(CO)3 subunit in 1(CO)4 undergoes substitution with PMe3 and cyanide to afford 1(CO)3(PMe3) and (Et4N)[1(CN)(CO)3], respectively. Kinetic studies show that 1(CO)4 reacts faster with donor ligands than does its parent Fe2(S2C2H4)(CO)6. The rate of reaction of 1(CO)4 with PMe3 was first order in each reactant, k = 3.1 x 10(-4) M(-1) s(-1). The activation parameters for this substitution reaction, DeltaH = 5.8(5) kcal/mol and DeltaS = -48(2) cal/deg.mol, indicate an associative pathway. DFT calculations suggest that, relative to Fe2(S2C2H4)(CO)6, the enhanced electrophilicity of 1(CO)4 arises from the stabilization of a "rotated" transition state, which is favored by the unsymmetrically disposed donor ligands. Oxidation of MeCN solutions of 1(CO)3(PMe3) with Cp2FePF6 yielded [Fe2(S2C2H4)(mu-CO)(CO)2(dppv)(PMe3)(NCMe)](PF6)2. Reaction of this compound with PMe3 yielded [Fe2(S2C2H4)(mu-CO)(CO)(dppv)(PMe3)2(NCMe)](PF6)2.     

Direct Lanthanide-Transition Metal Interactions: Synthesis of (NH(3))(2)YbFe(CO)(4) and Crystal Structures of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity)

The heterometallic complex (NH(3))(2)YbFe(CO)(4) was prepared from the reduction of Fe(3)(CO)(12) by Yb in liquid ammonia. Ammonia was displaced from (NH(3))(2)YbFe(CO)(4) by acetonitrile in acetonitrile solution, and the crystalline compounds {[(CH(3)CN)(3)YbFe(CO)(4))](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity) were obtained. An earlier X-ray study of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) showed that it is a ladder polymer with direct Yb-Fe bonds. In the present study, an X-ray crystal structure analysis also showed that [(CH(3)CN)(3)YbFe(CO)(4)](infinity) is a sheetlike array with direct Yb-Fe bonds. Crystal data for {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity): monoclinic space group P2(1)/c, a = 21.515(8) ?, b = 7.838(2) ?, c = 19.866(6) ?, beta = 105.47(2) degrees, Z = 4. Crystal data for [(CH(3)CN)(3)YbFe(CO)(4)](infinity): monoclinic space group P2(1)/n, a = 8.364(3) ?, b = 9.605(5) ?, c = 17.240(6) ?, beta = 92.22(3) degrees, Z = 4. Electrical conductivity measurements in acetonitrile show that these acetonitrile complexes are partially dissociated into ionic species. IR and NMR spectra of the solutions reveal the presence of [HFe(CO)(4)](-). However, upon recrystallization, the acetonitrile complexes show no evidence for the presence of [HFe(CO)(4)](-) on the basis of their IR spectra. The solid state MAS (2)H NMR spectra of deuterated acetonitrile complexes give no evidence for [(2)HFe(CO)(4)](-). It appears that rupture of the Yb-Fe bond could occur in solution to generate the ion pair [L(n)Yb](2+)[Fe(CO)(4)](2-), but then the highly basic [Fe(CO)(4)](2-) anion could abstract a proton from a coordinated acetonitrile ligand to form [HFe(CO)(4)](-). However, upon crystallization, the proton could be transferred back to the ligand, which results in the neutral polymeric species.     

Redox-noninnocence of the S,S'-coordinated ligands in bis(benzene-1,2-dithiolato)iron complexes

The electronic structures of complexes of iron containing two S,S'-coordinated benzene-1,2-dithiolate, (L)(2)(-), or 3,5-di-tert-butyl-1,2-benzenedithiolate, (L(Bu))(2)(-), ligands have been elucidated in depth by electronic absorption, infrared, X-band EPR, and Mossbauer spectroscopies. It is conclusively shown that, in contrast to earlier reports, high-valent iron(IV) (d(4), S = 1) is not accessible in this chemistry. Instead, the S,S'-coordinated radical monoanions (L(*))(1)(-) and/or (L(Bu)(*))(1)(-) prevail. Thus, five-coordinate [Fe(L)(2)(PMe(3))] has an electronic structure which is best described as [Fe(III)(L)(L(*))(PMe(3))] where the observed triplet ground state of the molecule is attained via intramolecular, strong antiferromagnetic spin coupling between an intermediate spin ferric ion (S(Fe) = (3)/(2)) and a ligand radical (L(*))(1)(-) (S(rad) = (1)/(2)). The following complexes containing only benzene-1,2-dithiolate(2-) ligands have been synthesized, and their electronic structures have been studied in detail: [NH(C(2)H(5))(3)](2)[Fe(II)(L)(2)] (1), [N(n-Bu)(4)](2)[Fe(III)(2)(L)(4)] (2), [N(n-Bu)(4)](2)[Fe(III)(2)(L(Bu))(4)] (3); [P(CH(3))Ph(3)][Fe(III)(L)(2)(t-Bu-py)] (4) where t-Bu-py is 4-tert-butylpyridine. Complexes containing an Fe(III)(L(*))(L)- or Fe(III)(L(Bu))(L(Bu)(*))- moiety are [N(n-Bu)(4)][Fe(III)(2)(L(Bu))(3)(L(Bu)(*))] (3(ox)()), [Fe(III)(L)(L(*))(t-Bu-py)] (4(ox)()), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))] (7), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))(2)] (8), and [Fe(III)(L(Bu))(L(Bu)(*))(PPr(3))] (9), where Pr represents the n-propyl substituent. Complexes 2, 3(ox)(), 4, [Fe(III)(L)(L(*))(PMe(3))(2)] (6), and 9 have been structurally characterized by X-ray crystallography.     

The hydrophilic phosphatriazaadamantane ligand in the development of H2 production electrocatalysts: iron hydrogenase model complexes

As functional biomimics of the hydrogen-producing capability of the dinuclear active site in [Fe]H(2)ase, the Fe(I)Fe(I) organometallic complexes, (mu-pdt)[Fe(CO)(2)PTA](2), 1-PTA(2), (pdt = SCH(2)CH(2)CH(2)S; PTA = 1,3,5-triaza-7-phosphaadamantane), and (mu-pdt)[Fe(CO)(3)][Fe(CO)(2)PTA], 1-PTA, were synthesized and fully characterized. For comparison to the hydrophobic (mu-pdt)[Fe(CO)(2)(PMe(3))](2) and [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) analogues, electrochemical responses of 1-PTA(2) and 1-(PTA.H(+))(2) were recorded in acetonitrile and in acetonitrile/water mixtures in the absence and presence of acetic acid. The production of H(2) and the dependence of current on acid concentration indicated that the complexes were solution electrocatalysts that decreased over-voltage for H(+) reduction from HOAc in CH(3)CN by up to 600 mV. The most effective electrocatalyst is the asymmetric 1-PTA species, which promotes H(2) formation from HOAc (pK(a) in CH(3)CN = 22.6) at -1.4 V in CH(3)CN/H(2)O mixtures at the Fe(0)Fe(I) redox level. Functionalization of the PTA ligand via N-protonation or N-methylation, generating (mu-pdt)[Fe(CO)(2)(PTA-H(+))](2), 1-(PTA.H(+))(2), and (mu-pdt)[Fe(CO)(2)(PTA-CH(3)(+))](2), 1-(PTA-Me(+))(2), provided no obvious advantages for the electrocatalysis because in both cases the parent complex is reclaimed during one cycle under the electrochemical conditions and H(2) production catalysis develops from the neutral species. The order of proton/electron addition to the catalyst, i.e., the electrochemical mechanism, is dependent on the extent of P-donor ligand substitution and on the acid strength. Cyclic voltammetric curve-crossing phenomena was observed and analyzed in terms of the possible presence of an eta(2)-H(2)-Fe(II)Fe(I) species, derived from reduction of the Fe(I)Fe(I) parent complex to Fe(0)Fe(I) followed by uptake of two protons in an ECCE mechanism.     

Pendant bases as proton relays in iron hydride and dihydrogen complexes

The complex trans-[HFe(PNP)(dmpm)(CH(3)CN)]BPh(4), 3, (where PNP is Et(2)PCH(2)N(CH(3))CH(2)PEt(2) and dmpm is Me(2)PCH(2)PMe(2)) can be successively protonated in two steps using increasingly strong acids. Protonation with 1 equiv of p-cyanoanilinium tetrafluoroborate in acetone-d(6) at -80 degrees C results in ligand protonation and the formation of endo (4a) and exo (4b) isomers of trans-[HFe(PNHP)(dmpm)(CH(3)CN)](BPh(4))(2). The endo isomer undergoes rapid intramolecular proton/hydride exchange with an activation barrier of 12 kcal/mol. The exo isomer does not exchange. Studies of the reaction of 3 with a weaker acid (anisidinium tetrafluoroborate) in acetonitrile indicate that a rapid intermolecular proton exchange interconverts isomers 4a and 4b, and a pK(a) value of 12 was determined for these two isomers. Protonation of 3 with 2 equiv of triflic acid results in the protonation of both the PNP ligand and the metal hydride to form the dihydrogen complex [(H(2))Fe(PNHP)(dmpm)(CH(3)CN)](3+), 11. Studies of related complexes [HFe(PNP)(dmpm)(CO)](+) (12) and [HFe(depp)(dmpm)(CH(3)CN)](+) (10) (where depp is bis(diethylphosphino)propane) confirm the important roles of the pendant base and the ligand trans to the hydride ligand in the rapid intra- and intermolecular hydride/proton exchange reactions observed for 4. Features required for an effective proton relay and their potential relevance to the iron-only hydrogenase enzymes are discussed.     

Synthesis, structure and DFT study of dinuclear iron, cobalt and nickel complexes with cyclopentadienyl-metal moieties

Reactions of 1,1'-bis(dipheny1phosphino)cobaltocene with Co(PMe(3))(4), Ni(PMe(3))(4), Fe(PMe(3))(4), Ni(COD)(2), FeMe(2)(PMe(3))(4) or NiMe(2)(PMe(3))(3) afford a series of novel dinuclear complexes [((Me(3)P)[lower bond 1 start]Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)M[upper bond 1 end](η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (M = Co(1), Ni(2) and Fe(3)) [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](COD)](4), [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](PMe(3))(2)] (5) and [((Me(3)P)[lower bond 1 start]Co(Me)(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)Fe[upper bond 1 end](Me)(η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (6). Reactions of 1,1'-bis(dipheny1phosphino)ferrocene with Ni(PMe(3))(4), NiMe(2)(PMe(3))(3), or Co(PMe(3))(4) gives rise to complexes [Fe(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)M[upper bond 1 end](PMe(3))(2)] (M = Ni (7), Co (8)). The complexes 1-8 were spectroscopically investigated and studied by X-ray single crystal diffraction. The possible reaction mechanisms and structural characteristics are discussed. Density functional theory (DFT) calculations strongly support the deductions.     

Redox and structural properties of mixed-valence models for the active site of the [FeFe]-hydrogenase: progress and challenges

The one-electron oxidations of a series of diiron(I) dithiolato carbonyls were examined to evaluate the factors that affect the oxidation state assignments, structures, and reactivity of these low-molecular weight models for the H ox state of the [FeFe]-hydrogenases. The propanedithiolates Fe 2(S 2C 3H 6)(CO) 3(L)(dppv) (L = CO, PMe 3, P i-Pr 3) oxidize at potentials approximately 180 mV milder than the related ethanedithiolates ( Angew. Chem., Int. Ed. 2007, 46, 6152). The steric clash between the central methylene of the propanedithiolate and the phosphine favors the rotated structure, which forms upon oxidation. Electron Paramagnetic Resonance (EPR) spectra for the mixed-valence cations indicate that the unpaired electron is localized on the Fe(CO)(dppv) center in both [Fe 2(S 2C 3H 6)(CO) 4(dppv)]BF 4 and [Fe 2(S 2C 3H 6)(CO) 3(PMe 3)(dppv)]BF 4, as seen previously for the ethanedithiolate [Fe 2(S 2C 2H 4)(CO) 3(PMe 3)(dppv)]BF 4. For [Fe 2(S 2C n H 2 n )(CO) 3(P i-Pr 3)(dppv)]BF 4; however, the spin is localized on the Fe(CO) 2(P i-Pr 3) center, although the Fe(CO)(dppv) site is rotated in the crystalline state. IR and EPR spectra, as well as redox potentials and density-functional theory (DFT) calculations, suggest that the Fe(CO) 2(P i-Pr 3) site is rotated in solution, driven by steric factors. Analysis of the DFT-computed partial atomic charges for the mixed-valence species shows that the Fe atom featuring a vacant apical coordination position is an electrophilic Fe(I) center. One-electron oxidation of [Fe 2(S 2C 2H 4)(CN)(CO) 3(dppv)] (-) resulted in 2e oxidation of 0.5 equiv to give the mu-cyano derivative [Fe (I) 2(S 2C 2H 4)(CO) 3(dppv)](mu-CN)[Fe (II) 2(S 2C 2H 4)(mu-CO)(CO) 2(CN)(dppv)], which was characterized spectroscopically.     

Dehydration reaction of hydroxyl substituted alkenes and alkynes on the Ru(2)S(2) complex

A variety of inter- and intramolecular dehydration was found in the reactions of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1) with hydroxyl substituted alkenes and alkynes. Treatment of 1 with allyl alcohol gave a C(3)S(2) five-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CH(OCH(2)CH=CH(2))S]](CF(3)SO(3))(4) (2), via C-S bond formation after C-H bond activation and intermolecular dehydration. On the other hand, intramolecular dehydration was observed in the reaction of 1 with 3-buten-1-ol giving a C(4)S(2) six-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2) [mu-SCH(2)CH=CHCH(2)S]](CF(3)SO(3))(4) (3). Complex 1 reacts with 2-propyn-1-ol or 2-butyn-1-ol to give homocoupling products, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCR=CHCH(OCH(2)C triple bond CR)S]](CF(3)SO(3))(4) (4: R = H, 5: R = CH(3)), via intermolecular dehydration. In the reaction with 2-propyn-1-ol, the intermediate complex having a hydroxyl group, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OH)S]](CF(3)SO(3))(4) (6), was isolated, which further reacted with 2-propyn-1-ol and 2-butyn-1-ol to give 4 and a cross-coupling product, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OCH(2)C triple bond CCH(3))S]](CF(3)SO(3))(4) (7), respectively. The reaction of 1 with diols, (HO)CHRC triple bond CCHR(OH), gave furyl complexes, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SSC=CROCR=CH]](CF(3)SO(3))(3) (8: R = H, 9: R = CH(3)) via intramolecular elimination of a H(2)O molecule and a H(+). Even though (HO)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OH) does not have any propargylic C-H bond, it also reacts with 1 to give [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)C(=CH(2))C(=C=C(CH(3))(2))]S](CF(3)SO(3))(4) (10). In addition, the reaction of 1 with (CH(3)O)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OCH(3)) gives [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(2)][mu-S=C(C(CH(3))(2)OCH(3))C=CC(CH(3))CH(2)S][Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)]](CF(3)SO(3))(4) (11), in which one molecule of CH(3)OH is eliminated, and the S-S bond is cleaved.     

Electron-rich diferrous-phosphane-thiolates relevant to Fe-only hydrogenase: is cyanide "nature's trimethylphosphane"?

The two-step one-pot oxidative decarbonylation of [Fe2(S2C2H4)(CO)4(PMe3)2] (1) with [FeCp2]PF6, followed by addition of phosphane ligands, led to a series of diferrous dithiolato carbonyls 2-6, containing three or four phosphane ligands. In situ measurements indicate efficient formation of 1(2+) as the initial intermediate of the oxidation of 1, even when a deficiency of the oxidant was employed. Subsequent addition of PR3 gave rise to [Fe2(S2C2H4)(mu-CO)(CO)3(PMe3)3]2+ (2) and [Fe2(S2C2H4)(mu-CO)(CO)2(PMe3)2(PR3)2]2+ (R = Me 3, OMe 4) as principal products. One terminal CO ligand in these complexes was readily substituted by MeCN, and [Fe2(S2C2H4)(mu-CO)(CO)2(PMe3)3(MeCN)]2+ (5) and [Fe2(S2C2H4)(mu-CO)(CO)(PMe3)4(MeCN)]2+ (6) were fully characterized. Relevant to the H(red) state of the active site of Fe-only hydrogenases, the unsymmetrical derivatives 5 and 6 feature a semibridging CO ligand trans to a labile coordination site.     

(NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')]: an iron thiolate complex modeling the [Fe(CN)(2)(CO)(S-Cys)(2)] site of [NiFe] hydrogenase centers

In the search for complexes modeling the [Fe(CN)(2)(CO)(cysteinate)(2)] cores of the active centers of [NiFe] hydrogenases, the complex (NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')] (4) was found ('S(3)'(2-)=bis(2-mercaptophenyl)sulfide(2-)). Starting complex for the synthesis of 4 was [Fe(CO)(2)('S(3)')](2) (1). Complex 1 formed from [Fe(CO)(3)(PhCH=CHCOMe)] and neutral 'S(3)'-H(2). Reactions of 1 with PCy(3) or DPPE (1,2-bis(diphenylphosphino)ethane) yielded diastereoselectively [Fe(CO)(2)(PCy(3))('S(3)')] (2) and [Fe(CO)(dppe)('S(3)')] (3). The diastereoselective formation of 2 and 3 is rationalized by the trans influence of the 'S(3)'(2-) thiolate and thioether S atoms which act as pi donors and pi acceptors, respectively. The trans influence of the 'S(3)'(2-) sulfur donors also rationalizes the diastereoselective formation of the C(1) symmetrical anion of 4, when 1 is treated with four equivalents of NEt(4)CN. The molecular structures of 1, 3 x 0.5 C(7)H(8), and (AsPh(4))(2)[Fe(CN)(2)(CO)('S(3)')] x acetone (4 a x C(3)H(6)O) were determined by X-ray structure analyses. Complex 4 is the first complex that models the unusual 2:1 cyano/carbonyl and dithiolate coordination of the [NiFe] hydrogenase iron site. Complex 4 can be reversibly oxidized electrochemically; chemical oxidation of 4 by [Fe(Cp)(2)PF(6)], however, led to loss of the CO ligand and yielded only products, which could not be characterized. When dissolved in solvents of increasing proton activity (from CH(3)CN to buffered H(2)O), complex 4 exhibits drastic nu(CO) blue shifts of up to 44 cm(-1), and relatively small nu(CN) red shifts of approximately 10 cm(-1). The nu(CO) frequency of 4 in H(2)O (1973 cm(-1)) is higher than that of any hydrogenase state (1952 cm(-1)). In addition, the nu(CO) frequency shift of 4 in various solvents is larger than that of [NiFe] hydrogenase in its most reduced or oxidized state. These results demonstrate that complexes modeling properly the nu(CO) frequencies of [NiFe] hydrogenase probably need a [Ni(thiolate)(2)] unit. The results also demonstrate that the nu(CO) frequency of [Fe(CN)(2)(CO)(thiolate)(2)] complexes is more significantly shifted by changing the solvent than the nu(CO) frequency of [NiFe] hydrogenases by coupled-proton and electron-transfer reactions. The "iron-wheel" complex [Fe(6)[Fe('S(3)')(2)](6)] (6) resulting as a minor by-product from the recrystallization of 2 in boiling toluene could be characterized by X-ray structure analysis.     

Diferrous cyanides as models for the Fe-only hydrogenases

The first systematic study of diferrous dicyano dithiolates is described. Oxidation of [Fe2(S2C2H4)(CN)2(CO)4](2-) in the presence of cyanide and tertiary phosphines and of Fe2(S2C2H4)(CO)4(PMe3)2 in the presence of cyanide affords a series of diferrous cyanide derivatives that bear a stoichiometric, structural, and electronic relationship to the H(ox)(air) state of the Fe-only hydrogenases. With PPh3 as the trapping ligand, we obtained an unsymmetrical isomer of Fe2(S2C2H4)(mu-CO)(CN)2(PPh3)2(CO)2, as confirmed crystallographically. This diferrous cyanide features the semibridging CO-ligand, with Fe-muC bond lengths of 2.15 and 1.85 A. Four isomers of Fe2(S2C2H4)(mu-CO)(CN)2(PMe3)2(CO)2 were observed, the initial product again being unsymmetrical but more stable isomers being symmetrical. DFT calculations confirm that the most stable isomers of Fe2(S2C2H4)(mu-CO)(CN)2(PMe3)2(CO)2 have cyanide trans to mu-CO. Oxidative decarbonylation also afforded the new tetracyanide [Fe2(S2C2H4)(mu-CO)(CN)4(CO)2]2-. Insights into the oxidative decarbonylation mechanism of these syntheses come from the spectroscopic characterization of the tetracarbonyl [Fe2(S2C2H4)(mu-CO)(CN)3(CO)3](-). This species reacts with PEt3 to produce the stable adduct [Fe2(S2C2H4)(mu-CO)(CN)3(CO)2(PEt3)](-).     

Diruthenium dithiolato cyanides: basic reactivity studies and a post hoc examination of nature's choice of Fe versus Ru for hydrogenogenesis

The reaction of Ru2(S2C3H6)(CO)6 (1) with 2 equiv of Et4NCN yielded (Et4N)2[Ru2(S2C3H6)(CN)2(CO)4], (Et4N)2[3], which was shown crystallographically to consist of a face-sharing bioctahedron with the cyanide ligands in the axial positions, trans to the Ru-Ru bond. Competition experiments showed that 1 underwent cyanation >100x more rapidly than the analogous Fe2(S2C3H6)(CO)6. Furthermore, Ru2(S2C3H6)(CO)6 underwent dicyanation faster than [Ru2(S2C3H6)(CN)(CO)5]-, implicating a highly electrophilic intermediate [Ru2(S2C3H6)(mu-CO)(CN)(CO)5]-. Ru2(S2C3H6)(CO)6 (1) is noticeably more basic than the diiron compound, as demonstrated by the generation of [Ru2(S2C3H6)(mu-H)(CO)6]+, [1H]+. In contrast to 1, the complex [1H]+ is unstable in MeCN solution and converts to [Ru2(S2C3H6)(mu-H)(CO)5(MeCN)]+. (Et4N)2[3] was shown to protonate with HOAc (pKa = 22.3, MeCN) and, slowly, with MeOH and H2O. Dicyanide [3]2- is stable toward excess acid, unlike the diiron complex; it slowly forms the coordination polymer [Ru2(S2C3H6)(mu-H)(CN)(CNH)(CO)4]n, which can be deprotonated with Et3N to regenerate [H3]-. Electrochemical experiments demonstrate that [3H]- catalyzes proton reduction at -1.8 V vs Ag/AgCl. In contrast to [3]2-, the CO ligands in [3H]- undergo displacement. For example, PMe3 and [3H]- react to produce [Ru2(S2C3H6)(mu-H)(CN)2(CO)3(PMe3)]-. Oxidation of (Et4N)2[3] with 1 equiv of Cp2Fe+ gave a mixture of [Ru2(S2C3H6)(mu-CO)(CN)3(CO)3]- and [Ru2(S2C3H6)(CN)(CO)5]-, via a proposed [Ru2]2(mu-CN) intermediate. Overall, the ruthenium analogues of the diiron dithiolates exhibit reactivity highly reminiscent of the diiron species, but the products are more robust and the catalytic properties appear to be less promising.     

Synthesis and reactions of triphenylsilanethiolato complexes of manganese(II), iron(II), cobalt(II), and nickel(II)

Reactions of Fe[N(SiMe(3))(2)](2) with 1 and 2 equiv of Ph(3)SiSH in hexane afforded dinuclear silanethiolato complexes, [Fe(N(SiMe(3))(2))(mu-SSiPh(3))](2) (1) and [Fe(SSiPh(3))(mu-SSiPh(3))](2) (2), respectively. Various Lewis bases were readily added to 2, generating mononuclear adducts, Fe(SSiPh(3))(2)(L)(2) [L = CH(3)CN (3a), 4-(t)BuC(5)H(4)N (3b), PEt(3) (3c), (LL) = tmeda (3d)]. From the analogous reactions of M[N(SiMe(3))(2)](2) (M = Mn, Co) and [Ni(NPh(2))(2)](2) with Ph(3)SiSH in the presence of TMEDA, the corresponding silanethiolato complexes, M(SSiPh(3))(2)(tmeda) [M = Mn (4), Co (5), Ni (6)], were isolated. Treatment of 3a with (PPh(4))(2)[MoS(4)] or (NEt(4))(2)[FeCl(4)] resulted in formation of a linear trinuclear Fe-Mo-Fe cluster (PPh(4))(2)[MoS(4)(Fe(SSiPh(3))(2))(2)] (7) or a dinuclear complex (NEt(4))(2)[Fe(2)(SSiPh(3))(2)Cl(4)] (8). On the other hand, the reaction of 3a with [Cu(CH(3)CN)(4)](PF(6)) gave a cyclic tetranuclear copper cluster Cu(4)(SSiPh(3))(4) (9), where silanethiolato ligands were transferred from iron to copper. Silicon-sulfur bond cleavage was found to occur when the cobalt complex 5 was treated with (NBu(4))F in THF, and a cobalt-sulfido cluster Co(6)(mu(3)-S)(8)(PPh(3))(6) (10) was isolated upon addition of PPh(3) to the reaction system. The silanethiolato complexes reported here are expected to serve as convenient precursors for sulfido cluster synthesis.