Heat dissipation and magnetic properties of surface-coated Fe3O4 nanoparticles for biomedical applications

In this study, the influence of surface coating on the magnetic and heat dissipation properties of Fe₃O₄ nanoparticles was investigated. Fe₃O₄ nanoparticles that ranged in size between (particle sizes of 20 and 30 nm) were coated with polyethylenimine (PEI), oleic acid, and Pluronic F-127. Surface coatings that were composed of thick layers of oleic acid and Pluronic F-127 reduced dipole interactions between the particles, and resulted in reduced coercivity and decreased Néel relaxation times. The ac magnetization measurements revealed that the heat dissipation of the PEI-coated Fe₃O₄ nanoparticles was induced by hysteresis loss and Brownian relaxation loss and that of the oleic-acid-coated Fe₃O₄ nanoparticles was mainly induced by hysteresis loss and Néel relaxation loss.     

Magnetic response of NiFe2O4 nanoparticles in polymer matrix

We report the magnetic properties of magnetic nano-composite, consisting of different quantity of NiFe₂O₄ nanoparticles in polymer matrix. The nanoparticles exhibited a typical magnetization blocking, which is sensitive on the variation of magnetic field, mode of zero-field-cooled/field-cooled experiments and particle quantity in the matrix. The samples with lower particle quantity showed an upturn of magnetization down to 5 K, whereas the blocking of magnetization dominates at lower temperatures as the particle quantity increases in the polymer. We examine such magnetic behaviour in terms of the competitive magnetic ordering between core and surface spins of nanoparticles, taking into account the effect of inter-particle (dipole-dipole) interactions on nanoparticle magnetic dynamics.     

Thermomagnetic determination of Fe3O4 magnetic nanoparticle diameters for biomedical applications

The utility and promise of magnetic nanoparticles (MagNPs) for biomedicine rely heavily on accurate determination of the particle diameter attributes. While the average functional size and size distribution of the magnetic nanoparticles directly impact the implementation and optimization of nanobiotechnology applications in which they are employed, the determination of these attributes using electron microscopy techniques can be time-consuming and misrepresentative of the full nanoparticle population. In this work the average particle diameter and distribution of an ensemble of Fe₃O₄ ferrimagnetic nanoparticles are determined solely from temperature-dependent magnetization measurements; the results compare favorably to those obtained from extensive electron microscopy observations. The attributes of a population of biocompatible Fe₃O₄ nanoparticles synthesized by a thermal decomposition method are obtained from quantitative evaluation of a model that incorporates the distribution of superparamagnetic blocking temperatures represented through thermomagnetization data. The average size and size distributions are determined from magnetization data via temperature-dependent zero-field-cooled magnetization. The current work is unique from existing approaches based on magnetic measurement for the characterization of a nanoparticle ensemble as it provides both the average particle size as well as the particle size distribution.     

Grafting poly(ethylene glycol) monomethacrylate onto Fe3O4 nanoparticles to resist nonspecific protein adsorption

Magnetic nanoparticles grafted with poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization. In this approach, S-benzyl S′-trimethoxysilylpropyltrithiocarbonate, used as a chain transfer agent for RAFT, was first immobilized onto the magnetic nanoparticle surface, and then PEGMA was grafted onto the surface of magnetic nanoparticle via RAFT polymerization. The results showed that P(PEGMA) chains grew from magnetic nanoparticles by surface-induced RAFT polymerization. The grafted P(PEGMA) chains can decrease the nonspecific adsorption of proteins on the surface of Fe₃O₄ nanoparticles.     

Controlling synthesis of Fe nanoparticles with polyethylene glycol

This study looks at the synthesis of Fe nanoparticles using a borohydride reduction of metal salts in the presence of carboxyl and methoxyl terminated polyethylene glycol (PEG). As the PEG concentration is varied, there is a corresponding increase in the Fe content of samples as determined by Mossbauer spectroscopy. Particle sizes are between 70 and 300 nm as indicated by transmission electron microscopy. As the polymer concentration is increased the overall saturation magnetization of the coated nanoparticles initially increases due to the increased iron content with a maximum of 70 emu/g for nanoparticles with the largest Fe content. The magnetization then begins to decrease as the polymer concentration begins to contribute to a significant volume fraction of the sample. All samples are magnetically soft with high remanence as indicated by SQUID magnetometry measurements.     

Preparation of chitosan–ethylenediaminetetraacetate-enwrapped magnetic CoFe2O4 nanoparticles via zero-length emulsion crosslinking method

A kind of magnetic multiple functional groups nanocomposites, chitosan–ethylenediaminetetraacetate (EDTA)-enwrapped CoFe₂O₄ nanoparticles, i.e. CoFe₂O₄@chitosan–EDTA nanocomposites were synthesized by a facile zero-length emulsion crosslinking process. In this method, CoFe₂O₄ was used as magnetic core, and 1-ethyl-3-(3-dimethylminopropyl) carbodiimide hydrochloride (EDAC) was used as a crosslinker, integrating amino group of chitosan and carboxyl group of EDTA. Determination of amino groups in chitosan modified by EDAC-activated EDTA was carried out through the trinitrobenzenesulfonic acid (TNBS) method. The as-prepared magnetic nanocomposites were characterized by XRD, FT-IR, XPS, SEM, EDS, TEM, SAED and vibrating sample magnetometer (VSM), and the results showed that the as-prepared CoFe₂O₄@chitosan–EDTA nanocomposites have good dispersibility, spherical shape and enough magnetization. The method proposed can be extended to fabricate other magnetic nanocomposites possessed amino and carboxyl groups.     

Immiscibility in the NiFe2O4-NiCr2O4 spinel binary

The solid solution behavior of the Ni(Fe_1−nCr_n)₂O₄ spinel binary is investigated in the temperature range 400-1200 °C. Non-ideal solution behavior, as exhibited by non-linear changes in lattice parameter with changes in n, is observed in a series of single-phase solids air-cooled from 1200 °C. Air-annealing for 1 year at 600 °C resulted in partial phase separation in a spinel binary having n=0.5. Spinel crystals grown from NiO, Fe₂O₃ and Cr₂O₃ reactants, mixed to give NiCrFeO₄, by Ostwald ripening in a molten salt solvent, exhibited single-phase stability down to about 750 °C (the estimated consolute solution temperature, T_cs). A solvus exists below T_cs. The solvus becomes increasingly asymmetric at lower temperatures and extrapolates to n values of 0.2 and 0.7 at 300 °C. The extrapolated solvus is shown to be consistent with that predicted using a primitive regular solution model in which free energies of mixing are determined entirely from changes in configurational entropy at room temperature.     

Solid state reaction synthesis of NiFe2O4 nanoparticles

Ni-ferrite (NiFe₂O₄) nanoparticles have been synthesized via a solid state reaction process. Ni and Fe bi-metallic nanoparticles in the form of Ni₃₃Fe₆₇ alloy nanopowder are first synthesized by simultaneous evaporation of the required amounts of pure Ni and Fe metals followed by rapid condensation of the evaporated metal flux into solid state by means of an inert gas, helium, using the process of inert gas condensation (IGC). In order to form the NiFe₂O₄ structure, as-synthesized samples (Ni₃₃Fe₆₇) are annealed for 12 h in ambient conditions at different annealing temperatures. Structural analyses show that NiFe₂O₄ starts to form at around 450 °C and gets progressively well defined with increasing annealing temperatures yielding particle with size ranging between 15 and 50 nm. Besides successfully forming NiFe₂O₄, NiO/Fe₃O₄ core/shell nanoparticles have also been synthesized by adjusting the annealing conditions. Three different structures, Ni₃₃Fe₆₇, NiO/Fe₃O₄, and NiFe₂O₄, obtained in this study are compared with respect to their structural and magnetic properties.     

Structural, microstructural and magnetic properties of NiFe2O4, CoFe2O4 and MnFe2O4 nanoferrite thin films

The structural, microstructural and magnetic properties of nanoferrite NiFe₂O₄ (NF), CoFe₂O₄ (CF) and MnFe₂O₄ (MF) thin films have been studied. The coating solution of these ferrite films was prepared by a chemical synthesis route called sol-gel combined metallo-organic decomposition method. The solution was coated on Si substrate by spin coating and annealed at 700 °C for 3 h. X-ray diffraction pattern has been used to analyze the phase structure and lattice parameters. The scanning electron microscopy (SEM) and atomic force microscopy (AFM) have been used to show the nanostructural behavior of these ferrites. The values of average grain's size from SEM are 44, 60 and 74 nm, and from AFM are 46, 61 and 75 nm, respectively, measured for NF, CF and MF ferrites. At room temperature, the values of saturation magnetization, M_s∼50.60, 33.52 and 5.40 emu/cc, and remanent magnetization, M_r∼14.33, 15.50 and 1.10 emu/cc, respectively, are observed for NF, CF and MF. At low temperature measurements of 10 K, the anisotropy of ferromagnetism is observed in these ferrite films. The superparamagnetic/paramagnetic behavior is also confirmed by χ′(T) curves of AC susceptibility by applying DC magnetizing field of 3 Oe. The temperature dependent magnetization measurements show the magnetic phase transition temperature.     

Magnetic and structural studies on CoFe2O4 nanoparticles synthesized by co-precipitation,normal micelles and reverse micelles methods

Cobalt ferrite nanoparticles were synthesized by the chemical co-precipitation, normal micelles and reverse micelles methods of iron and cobalt chlorides. X-ray diffraction analysis, Fourier Transform Infrared (FTIR) and Vibrating Sample Magnetometer were carried out at room temperature to study the structural and magnetic properties. X-ray patterns revealed the production of a broad single cubic phase with the average particle sizes of ∼12 nm, 5 nm and 8 nm for co-precipitation, normal micelles and reverse micelles methods, respectively. The FTIR measurements between 400 and 4000 cm⁻¹ confirmed the intrinsic cation vibrations of spinel structure for each one of the three methods. Moreover, the average particle sizes were lower than the single domain size (128 nm) and higher than the super-paramagnetic size (2–3 nm) at room temperature. The results revealed that the magnetic properties depend on the particle size and cation distribution, whereas the role of particle size is more significant.     

Heat generation of aqueously dispersed CoFe2O4 nanoparticles as heating agents for magnetically activated drug delivery and hyperthermia

Self-heating from magnetic nanoparticles under AC magnetic field can be used either for hyperthermia or to trigger the release of an anti-cancer drug, using thermo-responsive polymers. The heat generated by applying an AC magnetic field depends on the properties of magnetic nanoparticles (composition, size, crystal structure) as well as the frequency and amplitude of the magnetic field. Before these systems can be efficiently applied for in vitro or in vivo studies, a thorough analysis of the magnetically induced heating is required. In this study, CoFe₂O₄ nanoparticles were synthesized, dispersed in water, and investigated as heating agents for magnetic thermo-drug delivery and hyperthermia. The temperature profiles and infrared (IR) camera images of heat generation of CoFe₂O₄ nanoparticles under various AC magnetic fields of 127–700 Oe at 195, 231, and 266 kHz were measured using an IR thermacam, excluding the external AC magnetic field interruption. The CoFe₂O₄ nanoparticles were successfully dispersed in water using an 11-mercaptoundecanoic acid ligand exchange method to exchange the solvent used for synthesis of hexane for water. During the heating experiments, each of CoFe₂O₄ nanoparticle solutions reached a steady state where the temperature rose between 0.1 and 42.9 °C above ambient conditions when a magnetic field of 127–634 Oe was applied at 231 or 266 kHz. The heat generation was found to be dependent on the intensity of AC magnetic field and applied frequency. Therefore, the desired heating for magnetically triggered drug delivery or hyperthermia could be achieved in water-dispersed CoFe₂O₄ nanoparticles by adjusting the AC magnetic field and frequency.     

化学合成的钯改性的NiFe2O4纳米颗粒的结构和磁性

采用溶胶-凝胶自动燃烧方法合成了镍铁-钯复合材料NiFe₂O₄-Pd的磁性纳米颗粒. 样品在800 ℃烧结6 h生成结晶相. X射线衍射证实样品呈尖晶石结构. 利用场发射扫描电子显微镜研究结构形态和纳米颗粒的大小. 饱和磁化强度在100和300 K时,随着钯含量增加达5%降低,但加入10%Pd时磁化强度突然上升.     

Effect of substitution elements on magnetization of monodispersed MFe2O4 particles

The monodispersed hydrophilic magnetic fluids with nanometric M_xFe_3−xO₄ (M = Cu, Co, Ca and Ni) particles were prepared by sonochemical method. The substituted M amounts were analyzed with different x values by ICP-AES quantitatively. The excellent substitutability and magnetic property for Co, Ni was observed compared to those for Cu and Ca relatively. In particular, the applicability of Co was confirmed for novel radiotherapy.     

Superspin glass state in MnFe2O4 nanoparticles

Nanosized MnFe₂O₄ ferrites were synthesized by a simple method, which is based on the solid state ball-milling and calcinations of nitrate precursors and citric acid. The samples were characterized by using different methods. The results indicate that the products mainly consist of MnFe₂O₄ nanoparticles. The effect of different annealing temperatures on particle sizes and crystallinity of the samples was also studied. By increasing the particle size, the coercivity and magnetization of the samples increase. The increase of magnetization by increasing the crystallite size could be attributed to the lower surface spin canting and surface spin disorder of the larger magnetic nanoparticles. Our analysis of ac susceptibility measurements shows that the interparticle magnetic interaction leads to the superspin glass-like behavior in these nanoparticle samples.     

Magnetic resonance study of Ce and Gd doped NiFe2O4 nanoparticles

Present work is a study of temperature dependent electron paramagnetic resonance spectra of Ce and Gd doped nickel ferrite nanoparticles. The samples, synthesised by chemical route were characterised by X-ray diffractometer, electron paramagnetic resonance spectroscopy (EPR) and vibrating sample magnetometer (VSM). The average crystallite size of pure nickel ferrite is ∼64 nm and for Gd and Ce doped samples it is ∼20 nm and ∼14 nm, respectively. The EPR spectra were recorded from 120 to 300 K. Doping with Gd and Ce reduces the line width and g-value in comparison to that of pure nickel ferrite. Ce doped samples have the lowest values of both these parameters at room temperature. This indicates that Ce doped samples show lowest loss and is suitable for high frequency devices. EPR spin numbers are reduced while the spin relaxation time is increased after doping with rare earth ions. Gd doped samples have higher values of relaxation time and lower spin numbers in comparison to that of Ce doped samples. VSM results show that the magnetisation and coercivity are reduced after doping with both Ce and Gd rare earth ions.     

Versatile ferrofluids based on polyethylene glycol coated iron oxide nanoparticles

Versatile ferrofluids based on polyethylene glycol coated iron oxide nanoparticles were obtained by a facile protocol and thoroughly characterized. Superparamagnetic iron oxide nanoparticles synthesized using a modified forced hydrolysis method were functionalized with polyethylene glycol silane (PEG silane), precipitated and dried. These functionalized particles are dispersable in a range of solvents and concentrations depending on the desired properties. Examples of tunable properties are magnetic behavior, optical and magneto-optical response, thermal features and rheological behavior. As such, PEG silane functionalized particles represent a platform for the development of new materials that have broad applicability in e.g. biomedical, industrial or photonic environments. Magnetic, optical, magneto-optical, thermal and rheological properties of several ferrofluids based on PEG coated particles with different concentrations of particles dispersed in low molecular mass polyethylene glycol were investigated, establishing the applicability of such materials.     

Temperature dependence of magnetic properties of NiFe2O4 nanoparticles embeded in SiO2 matrix

Spinel ferrite NiFe₂O₄ nanoparticles (?25 nm) in SiO₂ matrix were prepared by sol–gel method. The phase and average crystallite size of the samples were determined by X-ray diffraction method and the particle size distributions were studied by a transmission electron microscope. Magnetic properties of the samples were investigated with different ferrite particle sizes and at various temperatures down to 10 K. Superparamagnetic properties were observed at room temperature when the particle size is less than 10 nm.In superparamagnetic state, the field dependence of magnetization follows Langevin function which was originally developed for paramagnetism. The effective anisotropy constant K_eff is found to increase significantly with the decrease in particle volume and an order of magnitude higher than that of the bulk samples when the particle size is below 5 nm due to the dominance of surface anisotropy. In case of nanosized systems, the effect of size reduction on the law of approach to saturation has also been studied in detail.     

Green synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

In this paper, we have first demonstrated a facile and green synthetic approach for preparing superparamagnetic Fe₃O₄ nanoparticles using α-d-glucose as the reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant. The X-ray powder diffraction (XRD), X-ray photoelectron spectrometry (XPS), and selected area electron diffraction (SAED) results showed that the inverse spinel structure pure phase polycrystalline Fe₃O₄ was obtained. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results exhibited that Fe₃O₄ nanoparticles were roughly spherical shape and its average size was about 12.5 nm. The high-resolution TEM (HRTEM) result proved that the nanoparticles were structurally uniform with a lattice fringe spacing about 0.25 nm, which corresponded well with the values of 0.253 nm of the (3 1 1) lattice plane of the inverse spinel Fe₃O₄ obtained from the JCPDS database. The superconducting quantum interference device (SQUID) results revealed that the blocking temperature (T_b) was 190 K, and that the magnetic hysteresis loop at 300 K showed a saturation magnetization of 60.5 emu/g, and the absence of coercivity and remanence indicated that the as-synthesized Fe₃O₄ nanoparticles had superparamagnetic properties. Fourier transform infrared spectroscopy (FT-IR) spectrum displayed that the characteristic band of Fe-O at 569 cm⁻¹ was indicative of Fe₃O₄. This method might provide a new, mild, green, and economical concept for the synthesis of other nanomaterials.     

Synthesis of Fe3O4 magnetic fluid used for magnetic resonance imaging and hyperthermia

Fe₃O₄ magnetic nanoparticles were prepared by co-precipitation from FeSO₄·7H₂O and FeCl₃·6H₂O aqueous solutions using NaOH as precipitating reagent. The nanoparticles have an average size of 12 nm and exhibit superparamagnetism at room temperature. The nanoparticles were used to prepare a water-based magnetic fluid using oleic acid and Tween 80 as surfactants. The stability and magnetic properties of the magnetic fluid were characterized by Gouy magnetic balance. The experimental results imply that the hydrophilic block of Tween 80 can make the Fe₃O₄ nanoparticles suspending in water stable even after dilution and autoclaving. The magnetic fluid demonstrates excellent stability and fast magneto-temperature response, which can be used both in magnetic resonance imaging and magnetic fluid hyperthermia.     

Optical and electronic properties of NiFe2O4 and CoFe2O4 thin films

We report the optical and electronic properties of the inverse spinel ferrite NiFe₂O₄ and CoFe₂O₄ thin films deposited on single crystal sapphire by electron beam deposition. We carried out variable temperature (78–500 K) transmittance measurements on the thin films to investigate the optical properties and electronic structures of these ferrites. The absorption spectra of both NiFe₂O₄ and CoFe₂O₄ thin films show insulating characters with Ni (Co) d to d on-site transitions below 3 eV. The energy bands above 3 eV are mainly due to the O 2p to Fe 3d charge transfer transitions. The observed electronic transitions have been assigned based on the first principles calculations and comparisons with structurally similar Ni and Co-containing compounds. The Co²⁺ d to d transition in the CoFe₂O₄ thin film shows a strong temperature dependence, likely due to the spin-charge coupling effect.