Determination of anisotropy constants of protein encapsulated iron oxide nanoparticles by electron magnetic resonance

Angle-dependent electron magnetic resonance was performed on 4.9, 8.0, and 19 nm iron oxide nanoparticles encapsulated within protein capsids and suspended in water. Measurements were taken at liquid nitrogen temperature after cooling in a 1 T field to partially align the particles. The angle dependence of the shifts in the resonance field for the iron oxide nanoparticles (synthesized within Listeria-Dps, horse spleen ferritin, and cowpea chlorotic mottle virus) all show evidence of a uniaxial anisotropy. Using a Boltzmann distribution for the particles’ easy-axis direction, we are able to use the resonance field shifts to extract a value for the anisotropy energy, showing that the anisotropy energy density increases with decreasing particle size. This suggests that surface anisotropy plays a significant role in magnetic nanoparticles of this size.     

Quantitative MR imaging of targeted SPIO particles on the cell surface and comparison to flow cytometry

Purpose

To detect anti-CEACAM5 targeted superparamagnetic iron oxide (SPIO) particles in vitro on the cell surface by quantitative magnetic resonance (MR) imaging and to compare with flow cytometry.

Materials and Methods

The monoclonal mouse antibody T84.1 and an appropriate IgG isotype antibody were conjugated to dextran-coated SPIO particles. HT29 cells expressing carcinoembryonic antigen (CEACAM5) were treated with antibody-conjugated SPIO particles. Purified cell samples were examined on a 3.0-T MR scanner using a multi-echo spin-echo sequence for MR relaxometry. Aliquots of the cell samples were further treated with a fluorescein isothiocyanate (FITC) anti-dextran antibody and an Alexa Fluor 488 anti-mouse antibody for the corresponding flow cytometry.

Results

MR relaxometry revealed a dose-dependent binding of T84.1-conjugated SPIO particles with a positive correlation between R₂ relaxation rate of cell samples and SPIO particle concentration during incubation (r=0.993, P<.01). Positive correlations were also observed between R₂ relaxation rate and flow cytometry (geometric mean) with both fluorescent antibodies (r=0.972 and r=0.953, both P<.01), respectively.

Conclusion

The study revealed the feasibility of quantitative MR imaging of targeted SPIO particles on the cell surface comparable to flow cytometry.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Magnetic properties and the mechanism of formation of the uncompensated magnetic moment of antiferromagnetic ferrihydrite nanoparticles of a bacterial origin

The magnetic properties of the superparamagnetic ferrihydrite nanoparticles that form as a result of the vital activity of Klebsiella oxytoca bacteria are studied. Both an initial powder with an average number of iron atoms N _Fe ～ 2000–2500 in a particle and this powder after annealing at 140°C for 3 h in air are investigated. The following substantial modifications of the magnetic properties of the ferrihydrite nanoparticles are detected after annealing: the superparamagnetic blocking temperature increases from 23 to 49.5 K, and the average magnetic moment of a particle increases (as follows from the results of processing of magnetization curves). The particles have antiferromagnetic ordering, and the magnetic moment resulting in the superparamagnetism of the system appears due to random spin decompensation inside the particle. For this mechanism, the number of uncompensated spins is proportional to the number of magnetically active atoms raised to the one-half power, and this relation holds true for the samples under study at a good accuracy. The possible causes of the detected shift of magnetic hysteresis loops at low temperatures upon field cooling are discussed.     

Particle size dependence of relaxivity for silica-coated iron oxide nanoparticles

We investigate the particle size dependence of the relaxivity of hydrogen protons in an aqueous solution of iron oxide (Fe₃O₄) nanoparticles coated in silica for biocompatibility. The T₁ and T₂ relaxation times for various concentrations of silica-coated nanoparticles were determined by a magnetic resonance scanner. We find that the relaxivity increased linearly with increasing particle size. The T₂ relaxivity (R₂) is more than 50 times larger than the T₁ relaxivity (R₁) for the nanoparticle contrast agent, which reflects the fact that the T₂ relaxation is mainly influenced by outer sphere processes. The high R₂/R₁ ratio demonstrates that silica-coated iron oxide nanoparticles may serve as a T₂ contrast agents in magnetic resonance imaging with high efficacy.     

Quantification of superparamagnetic iron oxide using inversion recovery balanced steady-state free precession

Cellular and molecular MRI trafficking studies using superparamagnetic iron oxide (SPIO) have greatly improved non-invasive investigations of disease progression and drug efficacy, but thus far, these studies have largely been restricted to qualitative assessment of hypo- or hyperintense areas near SPIO. In this work, SPIO quantification using inversion recovery balanced steady-state free precession (IR-bSSFP) was demonstrated at 3 T by extracting R₂ values from a monoexponential model (P. Schmitt et al., 2004). A low flip angle was shown to reduce the apparent recovery rate of the IR-bSSFP time course, thus extending the dynamic range of quantification. However, low flip angle acquisitions preclude the use of traditional methods for combining RF phase-cycled images to reduce banding artifacts arising from off-resonance due to B₀ inhomogeneity. To achieve R₂ quantification of SPIO, we present a new algorithm applicable to low flip angle IR-bSSFP acquisitions that is specifically designed to identify on-resonance acquisitions. We demonstrate in this work, using both theoretical and empirical methods, that the smallest estimated R₂ from multiple RF phase-cycled acquisitions correspond well to the on-resonance time course. Using this novel minimum R₂ algorithm, homogeneous R₂ maps and linear R₂ calibration curves were created up to 100 μg(Fe)/mL with 20° flip angles, despite substantial B₀ inhomogeneity. In addition, we have shown this technique to be feasible for pre-clinical research: the minimum R₂ algorithm was resistant to off-resonance in a single slice mouse R₂ map, whereas maximum intensity projection resulted in banding artifacts and overestimated R₂ values. With the application of recent advances in accelerated acquisitions, IR-bSSFP has the potential to quantify SPIO in vivo, thus providing important information for oncology, immunology, and regenerative medicine MRI studies.     

Decreasing iron susceptibility with temperature in quantitative susceptibility mapping: A phantom study

To clarify the temperature dependence of susceptibility estimated by quantitative susceptibility mapping (QSM) analysis, we investigated the relationship between temperature and susceptibility using a cylinder phantom with varying temperatures. Six solutions with various concentrations of superparamagnetic iron oxide (SPIO) nanoparticles were employed. These tubes were placed in a cylinder phantom and surrounded with water. The temperature of the circulated water was adjusted to change the temperature in the cylinder phantom from 25.8 °C to 42.5 °C. The cylinder phantom was scanned via a three-dimensional multiple spoiled gradient-echo sequence for R2* and QSM analyses with varying temperatures. The relationships between temperature, susceptibility, and R2* values were determined. Moreover, the temperature coefficients of susceptibility (χ-Tc) and (R2*-Tc) were calculated at each concentration and the linearities in these indices against each SPIO concentration were validated. Significant inverse correlations were found between temperature, susceptibility, and R2* values at each SPIO concentration due to the decrease in paramagnetic iron susceptibility that occurred with increasing temperature based on Curie's law. Moreover, although there were significant correlations between the susceptibility and R2* values at any temperature, the slopes of the regression lines grew in height with greater temperatures. The percentage of difference per Celsius degree in susceptibility in any SPIO concentration was lower than the corresponding finding among the R2* results. There were strong linearities between the SPIO concentration, χ-Tc (r = −0.994; p < 0.001), and R2*-Tc (r = −0.998; p < 0.001). The χ-Tc and R2*-Tc outcomes in a particular voxel varied considerably with the iron contents. Although there was an inverse correlation noted between temperature and susceptibility, the susceptibility analysis showed smaller temperature dependence relative to the R2* analysis. QSM analysis might be a more suitable option for magnetic resonance-based iron quantification in comparison with R2* relaxometry.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

In situ preparation of high relaxivity iron oxide nanoparticles by coating with chitosan: A potential MRI contrast agent useful for cell tracking

Iron oxide nanocrystals are of considerable interest in nanoscience and nanotechnology because of their nanoscale dimensions, nontoxic nature, and superior magnetic properties. Colloidal solutions of magnetic nanoparticles (ferrofluids) with a high magnetite content are highly desirable for most molecular imaging applications. In this paper, we present a method for in situ coating of superparamagnetic iron oxide (SPIO) with chitosan in order to increase the content of magnetite. Iron chloride salts (Fe³⁺ and Fe²⁺) were directly coprecipitated inside a porous matrix of chitosan by Co-60 γ-ray irradiation in an aqueous solution of acetic acid. Following sonication, iron oxide nanoparticles were formed inside the chitosan matrix at a pH value of 9.5 and a temperature of 50 °C. The [Fe³⁺]:[Fe²⁺]:[NH₄OH] molar ratio was 1.6:1:15.8. The final ferrofluid was formed with a pH adjustment to approximately 2.0/3.0, alongside with the addition of mannitol and lactic acid. We subsequently characterized the particle size, the zeta potential, the iron concentration, the magnetic contrast, and the cellular uptake of our ferrofluid. Results showed a z-average diameter of 87.2 nm, a polydispersity index (PDI) of 0.251, a zeta potential of 47.9 mV, and an iron concentration of 10.4 mg Fe/mL. The MRI parameters included an R1 value of 22.0 mM⁻¹ s⁻¹, an R2 value of 202.6 mM⁻¹ s⁻¹, and a R2/R1 ratio of 9.2. An uptake of the ferrofluid by mouse macrophages was observed. Altogether, our data show that Co-60 γ-ray radiation on solid chitosan may improve chitosan coating of iron oxide nanoparticles and tackle its aqueous solubility at pH 7. Additionally, our methodology allowed to obtain a ferrofluid with a higher content of magnetite and a fairly unimodal distribution of monodisperse clusters. Finally, MRI and cell experiments demonstrated the potential usefulness of this product as a potential MRI contrast agent that might be used for cell tracking.     

MR tracking of magnetically labeled mesenchymal stem cells in rats with liver fibrosis

Purpose

In vivo magnetic resonance (MR) tracking of magnetically labeled bone marrow mesenchymal stem cells (BMSCs) administered via the mesenteric vein to rats with liver fibrosis.

Materials and Methods

Rat BMSCs were labeled with superparamagnetic iron oxide (SPIO) and the characteristics of the BMSCs after labeling were investigated. Eighteen rats with CCL4-induced liver fibrosis were randomized to three groups to receive SPIO-labeled BMSCs (BMSC-labeled group), cell-free SPIO (SPIO group), or unlabeled BMSCs (control group). MR imaging of the liver was performed at different time points, and signal-to-noise ratio (SNR) of the liver was measured. In vivo distribution of delivered BMSCs was assessed by histological analysis.

Results

Labeling of BMSCs with SPIO did not significantly alter cell viability and proliferation activity. In BMSC-labeled group, the liver SNR immediately decreased from 8.56±0.26 to 3.53±0.41 at 1 h post injection and remained at a significantly lower level till 12 days (P<.05 versus the level before). By contrast, the liver SNR of the SPIO group almost recovered to the preinjection level (P=.125) at 3 days after a transient decrease. In control group, the liver SNR demonstrated no significant difference at the tested time points. Additionally, Prussian blue-positive cells were mainly distributed in the liver parenchyma, especially in injured areas.

Conclusion

The magnetically labeled BMSCs infused through the mesenteric vein can be detected in the fibrotic liver of rats using in vivo MR imaging up to 12 days after injection.     

Co x Ag1−x core–shell nanoparticles: magnetic and magneto-optical studies

The magneto-optical properties of 14-nm Co _x Ag_1?x core–shell nanoparticles (x=0.7, 0.8, and 0.35) deposited on different substrates are investigated at room temperature in the photon-energy range from 0.8 to 4.8 eV. Particles with low Ag content show spectra very similar to pure Co nanoparticles while particles with high Ag content have totally different features, where the Ag plasma edge dominates the spectra. The spectral features of the polar Kerr rotation depend on particle composition. The ageing process and development of an oxide layer influence the particles’ core–shell structures and magnetization curves. Co-rich particles exhibit lower resistance to the oxidation process as compared to Ag-rich ones. The quality of the nanoparticles was checked by transmission electron microscopy in respect of time scale.     

Synthesis and characterization of magnetite nanopowders

We have synthesized the iron oxide nanoparticles using the newly developed mechanical ultrasonication method with the FeSO₄ · 7H₂O. We have also investigated the crystallographic structural properties, morphology, and magnetic properties of the nanopowders. According to the high resolution X-ray diffraction result, the as-synthesized iron oxide nanoparticles were magnetite (Fe₃O₄). The particle size of the magnetite nanoparticles was about 6 nm confirmed by transmission electron microscopy image. The particle shape was almost a sphere confirmed by scanning electron microscopy image. The coercivity and saturation magnetization of the as-synthesized iron oxide nanopowders were 114 Oe, and 3.7 emu/g, respectively.     

Iron/iron oxides core-shell nanoparticles by laser pyrolysis: Structural characterization and enhanced particle dispersion

Well-dispersed nanoparticles with iron/iron carbide core and iron oxide shell structures may constitute an excellent magnetic material for different applications as magnetic nanofluids, contrast agents in magnetic resonance imaging, sensors and catalysts. Based on the ability of the CO₂ laser pyrolysis technique to synthesize nanoparticles of the Fe/Fe₂O₃ core-shell type, we further improve the powder dispersion by first collecting the nanoparticles in a toluene bubbler, positioned downstream and prior to the collection filter. Structural characterisation of the samples by electron microscopy and X-ray diffraction was performed. Conditions in which clusters contain a reduced number of nanoparticles (around 50) are evidenced. Mean core-shell particle sizes of 15 nm were estimated. Finally, preliminary results on the morphology of iron/iron oxide core-shell nanoparticles as hydrocarbon-based magnetic nanofluids are presented.     

Synthesis of amino-group functionalized superparamagnetic iron oxide nanoparticles and applications as biomedical labeling probes

Superparamagnetic iron oxide (SPIO) nanoparticles were synthesized by coprecipitation technique and further functionalized with amino-group to obtain amino-group functionalized (amino-SPIO) nanoparticles. The X-ray diffraction results reveal the structure of amino-SPIO nanoparticles, from which the average iron core diameter is approximately 10 nm by calculation; while Zetasizer reveals their hydrodynamic diameter are mainly distributed in the range of 40?C60 nm. These nanoparticles can be taken up by liver tissue, resulting in dramatically darkening of liver tissue under T2-magnetic resonance imaging (MRI). The spin?Cspin relaxivity coefficient of these nanoparticles is 179.20 mM^?1 s^?1 in a 1.5 T magnetic resonance system. In addition, amino-SPIO nanoparticles were conjugated to Tat (FITC) peptide and incubated with neural stem cells in vitro, the authors can detect the positive-labeling (labeled) neural stem cells showing green fluorescence, which indicates Tat (FITC) peptide-derivated amino-SPIO nanoparticles are able to enter cells. Furthermore, it was also find significant negative T2 contrast enhancement when compared with the non-nanoparticles-labeled neural stem cells in T2-weighted MRI. The amino-SPIO nanoparticles show promising potential as a new type of labeling probes, which can be used in magnetic resonance-enhanced imaging and fluorescence diagnosis.     

Preparation of nanosized iron oxide and its application in low temperature CO oxidation

A method to prepare iron oxide material which has a higher surface area and nanosized particle was developed. It was used as a catalyst for CO oxidation at low temperature. Iron oxide materials were prepared by precipitation under constant pH value. The effects of preparation parameters, such as iron salt (FeCl₃, Fe(NO₃)₃ and FeCl₂), pH value (between 8 and 12), drying temperature (between 120°C and 300°C), and feeding rate of the aqueous solution of the iron salt, on the characteristics of iron oxide have been investigated. The materials were characterized by N₂ sorption, powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The surface area of iron oxide was greater than 400 m²/g using FeCl₃ as the starting material with very low feeding rate of 10 ml/min, the pH value of 11, and drying at 120°C. The XRD patterns indicated that the iron oxide samples heated at a temperature below 180°C was either amorphous or of a particle size too small (<4 nm) for the samples prepared with FeCl₃. Depending on the preparation conditions, the iron oxide samples showed a phase transition from amorphous to various crystalline phases. Large amount of hydroxyl groups were preserved if the drying temperature was below 200°C. TEM images showed that the particle diameters were less than 4 nm for the samples prepared with FeCl₃ at pH value of 11 with a low feeding rate of 10 ml/min, and heated below 200°C. XPS Fe 2p_3/2 spectra showed the phase transition of iron oxide from Fe₃O₄ to FeO. The feeding rate of starting material and pH value during precipitation played the important roles to obtain iron oxide with high surface area. The nanosized iron oxide demonstrated high activity for CO oxidation even at ambient condition. The higher activity of Fe _x O _y nanoparticles in CO oxidation was attributed to a small particle size, high surface area, high concentration of hydroxyl groups, and more densely populated surface coordination unsaturated sites.This revised version was published online in August 2005 with a corrected issue number.     

Preparation of nanosized iron oxide and its application in low temperature CO oxidation

A method to prepare iron oxide material which has a higher surface area and nanosized particle was developed. It was used as a catalyst for CO oxidation at low temperature. Iron oxide materials were prepared by precipitation under constant pH value. The effects of preparation parameters, such as iron salt (FeCl₃, Fe(NO₃)₃ and FeCl₂), pH value (between 8 and 12), drying temperature (between 120°C and 300°C), and feeding rate of the aqueous solution of the iron salt, on the characteristics of iron oxide have been investigated. The materials were characterized by N₂ sorption, powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The surface area of iron oxide was greater than 400 m²/g using FeCl₃ as the starting material with very low feeding rate of 10 ml/min, the pH value of 11, and drying at 120°C. The XRD patterns indicated that the iron oxide samples heated at a temperature below 180°C was either amorphous or of a particle size too small (<4 nm)=" for=" the=" samples=" prepared=" with=">₃. Depending on the preparation conditions, the iron oxide samples showed a phase transition from amorphous to various crystalline phases. Large amount of hydroxyl groups were preserved if the drying temperature was below 200°C. TEM images showed that the particle diameters were less than 4 nm for the samples prepared with FeCl₃ at pH value of 11 with a low feeding rate of 10 ml/min, and heated below 200°C. XPS Fe 2p_3/2 spectra showed the phase transition of iron oxide from Fe₃O₄ to FeO. The feeding rate of starting material and pH value during precipitation played the important roles to obtain iron oxide with high surface area. The nanosized iron oxide demonstrated high activity for CO oxidation even at ambient condition. The higher activity of Fe _x O _y nanoparticles in CO oxidation was attributed to a small particle size, high surface area, high concentration of hydroxyl groups, and more densely populated surface coordination unsaturated sites.     

Water-soluble magnetic nanoparticles with biologically active stabilizers

We present the results of the interaction of iron oxide nanoparticles with some biologically active surfactants, namely, oleic acid and cytotoxic alkanolamine derivatives. Physico-chemical properties, as magnetization, magnetite concentration and particle diameter, of the prepared magnetic samples were studied. The nanoparticle size of 11 nm for toluene magnetic fluid determined by TEM is in good agreement with the data obtained by the method of magnetogranulometry. In vitro cytotoxic effect of water-soluble nanoparticles with different iron oxide:oleic acid molar ratio were revealed against human fibrosarcoma and mouse hepatoma cells. In vivo results using a sarcoma mouse model showed observable antitumor action.     

Role of ligands in the formation, phase stabilization, structural and magnetic properties of α-Fe2O3 nanoparticles

The electrochemical synthesis of alpha Fe₂O₃ nanoparticles was performed using quaternary ammonium salts viz. TPAB, TBAB and TOAB in an organic medium by optimizing current density and molar concentration of the ligand. The role of ligands in the formation of α phase, structure and magnetic properties was investigated in details. The effect of increasing chain length on the particle size confirmed that as the chain length increases from propyl to octyl, the particle size decreases. X-ray diffraction spectra of as prepared samples and TEM analysis confirmed the amorphous nature of iron oxide. TEM showed beads of iron oxide joined together with a size distribution in the range of 6–30 nm. The Mossbauer studies also support this observation that for the lowest particle size, the line width is broader which successively reduces with increase in particle size. Iron oxide capped with TOAB indicated superparamagnetic nature at room temperature. The resultant internal magnetic field of 506 mm/s due to hyperfine splitting clearly established the formation of α-Fe₂O₃ The infrared spectroscopy and pH measurements revealed the binding of tetra alkyl ligand with iron oxide. The IR spectra and the increase in basicity of as prepared samples confirmed the formation of hydrated iron oxide. Above 800°C the spectra indicated only iron oxide. Surface area obtained by BET method was 205 m²/g.     

Quantifications of in vivo labeled stem cells based on measurements of magnetic moments

Cells labeled by super paramagnetic iron-oxide (SPIO) nanoparticles are more easily seen in gradient echo MR images, but it has not been shown that the amount of nanoparticles or the number of cells can be directly quantified from MR images. This work utilizes a previously developed and improved Complex Image Summation around a Spherical or Cylindrical Object (CISSCO) method to quantify the magnetic moments of several clusters of SPIO nanoparticle labeled cells from archived rat brain images. With the knowledge of mass magnetization of the cell labeling agent and cell iron uptake, the number of cells in each nanoparticle cluster can be determined. Using a high pass filter with a reasonable size has little effect on each measured magnetic moment from the CISSCO method. These procedures and quantitative results may help improve the efficacy of cell-based treatments in vivo.     

Scaling of transverse nuclear magnetic relaxation due to magnetic nanoparticle aggregation

The aggregation of superparamagnetic iron oxide (SPIO) nanoparticles decreases the transverse nuclear magnetic resonance (NMR) relaxation time of adjacent water molecules measured by a Carr-Purcell-Meiboom-Gill (CPMG) pulse-echo sequence. This effect is commonly used to measure the concentrations of a variety of small molecules. We perform extensive Monte Carlo simulations of water diffusing around SPIO nanoparticle aggregates to determine the relationship between and details of the aggregate. We find that in the motional averaging regime scales as a power law with the number N of nanoparticles in an aggregate. The specific scaling is dependent on the fractal dimension d of the aggregates. We find for aggregates with d=2.2, a value typical of diffusion limited aggregation. We also find that in two-nanoparticle systems, is strongly dependent on the orientation of the two nanoparticles relative to the external magnetic field, which implies that it may be possible to sense the orientation of a two-nanoparticle aggregate. To optimize the sensitivity of SPIO nanoparticle sensors, we propose that it is best to have aggregates with few nanoparticles, close together, measured with long pulse-echo times.