Measurement of hydroxyl radical production in ultrasonic aqueous solutions by a novel chemiluminescence method

Measurement methods for ultrasonic fields are important for reasons of safety. The investigation of an ultrasonic field can be performed by detecting the yield of hydroxyl radicals resulting from ultrasonic cavitations. In this paper, a novel method is introduced for detecting hydroxyl radicals by a chemiluminescence (CL) reaction of luminol-hydrogen peroxide (H2O2)-K5[Cu(HIO6)2](DPC). The yield of hydroxyl radicals is calculated directly by the relative CL intensity according to the corresponding concentration of H2O2. This proposed CL method makes it possible to perform an in-line and real-time assay of hydroxyl radicals in an ultrasonic aqueous solution. With flow injection (FI) technology, this novel CL reaction is sensitive enough to detect ultra trace amounts of H2O2 with a limit of detection (3sigma) of 4.1 x 10(-11) mol L(-1). The influences of ultrasonic output power and ultrasonic treatment time on the yield of hydroxyl radicals by an ultrasound generator were also studied. The results indicate that the amount of hydroxyl radicals increases with the increase of ultrasonic output power (< or = 15 W mL(-1)). There is a linear relationship between the time of ultrasonic treatment and the yield of H2O2. The ultrasonic field of an ultrasonic cleaning baths has been measured by calculating the yield of hydroxyl radicals.     

Effective ultrasound electrochemical degradation of methylene blue wastewater using a nanocoated electrode

A novel sonoelectrochemical catalytic oxidation-driven process using a nanocoated electrode to treat methylene blue (MB) wastewater was developed. The nano-scale (nanocoated) electrode generated more hydroxyl radicals than non-nano-scale (non-nanocoated) electrodes did. However, hydroxyl radicals were easily adsorbed by the nanomaterial and thus were not able to enter the solution. Supersonic waves were found to enhance the mass-transfer effect on the nanocoated electrode surface, resulting in rapid diffusion of the generated hydroxyl radicals into the solution. In solution, the hydroxyl radicals then reacted with organic pollutants in the presence of ultrasonic waves. The effect of the nanocoated electrode on the MB wastewater treatment process was enhanced by ultrasound when compared to the non-nanocoated electrode used under the same conditions. The synergy of the nanocoated electrode and ultrasonic waves towards MB degradation was then studied. The optimum operating conditions resulted in a 92% removal efficiency for TOC and consisted of a current of 600 mA, an ultrasound frequency of 45 kHz, and a supersonic power of 250 W. The mechanism of ultrasound enhancement of the nanocoated electrode activity with respect to MB treatment is discussed. The reaction intermediates of the sonoelectrochemical catalytic oxidation process were monitored, and degradation pathways were proposed. The sonoelectrochemical catalytic oxidation-driven process using nanocoated electrodes was found to be a very efficient method for the treatment of non-biodegradable wastewater.     

Ultrasonic waste-water treatment: incidence of ultrasonic frequency on the rate of phenol and carbon tetrachloride degradation

Organic compounds in aqueous solution submitted to an ultrasonic irradiation behave differently according to their physical and chemical properties. In this work, hydrogen peroxide formation and the degradation rate of phenol and carbon tetrachloride have been studied at different frequencies: 20, 200, 500 and 800 kHz. Whatever the frequency, it is easier to decompose CCl₄ than phenol by means of ultrasonic wave. It is shown that the rates of reactions involving hydroxyl radicals (hydrogen peroxide formation and phenol degradation) have a maximum value at 200 kHz. The best yield observed at 200 kHz for the phenol degradation may be the result of better HO radicals availability outside of the bubble of cavitation. The degradation rate for carbon tetrachloride which decomposes into the bubble of cavitation increases with frequency. Calculating the reaction rate for one ultrasonic period shows that the efficiency of one ultrasonic cycle decreases as frequency increases.     

Effect of pH on the ultrasonic degradation of ionic aromatic compounds in aqueous solution

The sonolysis of 4-nitrophenol (4-NP) and aniline in O2-saturated aqueous solutions was performed at 610 kHz with ultrasonic power of 25 W and aqueous temperature of 15 +/- 1 degrees C. The initial rate of degradation of both 4-NP and aniline in sonolysis of aqueous media follows pseudo-first-order reaction kinetics. Investigation of the H2O2 generation rate in phosphate buffer media (0.01 M) over the range of pH 2-9 revealed a maximum yield at pH approximately 3.2. The pH, which results in modification of the physical properties (including charge) of molecules with ionisable functional groups, plays an important role in the sonochemical degradation of chemical contaminants. For hydrophilic substrates, the neutral species more easily diffuse to and accumulate at the hydrophobic interface of liquid-gas bubbles in comparison with their corresponding ionic forms. As a consequence, the degradation rate of 4-NP under ultrasonic irradiation decreases with increasing pH. In contrast, the disappearance rate of aniline exhibits a maximum under alkaline conditions due to the high solubility of the ionic anilinium ion and the (potentially) preferential movement of the uncharged form to the interface. Additionally, the rate of reaction of the uncharged aniline molecule (which dominates at pH > 4.6) with hydroxyl radicals is reported to be about three times as fast as the rate of reaction of the cationic anilinium species.     

Ultrasonic destruction of bisphenol-A: the operating parameters

Degradation of bisphenol-A (BPA) by ultrasonic irradiation at 300 kHz was investigated at varying substrate concentrations, pH, hydroxyl radical scavengers and sparge gases. It was found that increases in BPA initial concentration slowed down the reaction rate, but enhanced the sonochemical product yield. Both the rate of reaction and the product yield were adversely affected by pH elevation above the neutral level. The degree of BPA decay was fastest in the presence of air due to the formation of acids and excess radicals, and slowed down as the gas was replaced by argon and oxygen. The impact of large concentrations of hydroxyl radical scavengers such as carbonate and t-butanol was to decrease the rate of degradation, particularly when the scavenger concentration was considerably larger than that of BPA, and the deceleration was more remarkable in the presence of t-butanol than in that of carbonate.     

烷烃与羟基自由基反应速率常数的估算

根据烷烃分子中碳氢键离解能与烷基Ri的极化效应指数(PEI)的关系,由PEI表达烷烃C-H键与羟基自由基反应的活化能E;用烷基Ri的拓扑立体效应指数(TSEI)定量相关阿仑尼乌斯公式中的指数前因子A.研究表明PEI、TSEI和温度T三参数可以定量关联羟基自由基与烷烃中伯、仲、叔碳氢键反应的活性.所得方程可以准确地区分不同C-H键的活性.结合烷基Ri的PEI和TSEI参数用于预测不同温度下烷烃、环烷烃与羟基自由基反应的绝对速率常数和相对速率常数,预测值与实验值一致.     

Ultrasonically initiated emulsion polymerization of styrene in the presence of Fe2+

Ultrasonically initiated emulsion polymerization of styrene was carried out in the presence of Fe(2+). The addition of a small amount of Fe(2+) markedly enhanced the polymerization rate of styrene. In the presence of 50 microM Fe(2+), the conversion of monomer in the reaction time of 60 min was 2.4 times as high as that in the absence of Fe(2+). The increase in the polymerization rate was due to higher concentration of hydroxyl (*OH) radicals generated via Fenton reaction of Fe(2+) with hydrogen peroxide (H(2)O(2)), which was proved by a lower amount of H(2)O(2) in Fe(2+) aqueous solution compared with that in pure water during ultrasonic irradiation. However, the addition of excessive Fe(2+) had no further accelerating effect on the polymerization rate due to the reduction of *OH radicals by Fe(2+). So it is an effective way to add an appropriate amount of Fe(2+) to accelerate ultrasonically initiated emulsion polymerization of styrene.     

Sonocatalytic facilitation of hydroxyl radical generation in the presence of TiO2

The generation of hydroxyl (OH) radicals was investigated during ultrasonic irradiation and in the presence of TiO(2). The effect of TiO(2) on an ultrasonic system's oxidation power was evaluated by examining the oxidation of salicylic acid. The generation of the salicylic acid derivatives, 2,3-dihydroxybenzoic acid (DHBA) and 2,5-DHBA, was measured by high-performance liquid chromatography coupled with electrochemical detection under different experimental conditions. The presence of TiO(2) enhanced the generation of DHBA during ultrasonic irradiation, thus indicating a higher oxidation power in the ultrasonic system. Al(2)O(3) also increased the generation of DHBA during irradiation; however, the effect of TiO(2) was found to be higher than that of Al(2)O(3). The addition of OH radical scavengers such as dimethylsulfoxide (DMSO), methanol and mannitol significantly suppressed the production of DHBA, and DMSO was found to have the highest suppressive effect among all scavengers. The effects of dissolved gases on the generation of OH radicals were further studied, and their power was found to be in the order Xe > Ar > O(2) > N(2). The degassing of the irradiation solution completely suppressed the generation of OH radicals. These results indicate that the presence of TiO(2) accelerates the generation of OH radicals during ultrasonic irradiation, and that the process may be mediated through the induction of cavitation bubbles in irradiating solutions.     

Removal of dinitrotoluenes in wastewater by sono-activated persulfate

Oxidative degradation of dinitrotoluenes (DNTs) in wastewater was performed using persulfate anions combined with ultrasonic irradiation, wherein a synergistic effect is observed. The batch-wise experiments were carried out to elucidate the influence of various operating parameters on sono-activated persulfate oxidation, including ultrasonic power intensity, persulfate anion concentration, reaction temperature and acidity of wastewater. It is noteworthy that the nitrotoluene contaminants could be almost completely eliminated by virtue of sono-activated persulfate oxidation, wherein sulfate radicals serve as principal oxidants, of which amounts are significantly enhanced via addition of sodium sulfate. Based on the results given by gas chromatograph-mass spectrometer (GC-MS), it is postulated that the methyl group of DNTs preliminarily underwent oxidation pathway into dinitrobenzoic acid, followed by decarboxylation to form 1,3-dinitrobenzene (DNB). In sum, the sono-activated persulfate oxidation is a promising method for treatment of nitrotoluenes in wastewater.     

Dosimetry in sonochemistry: the use of aqueous terephthalate ion as a fluorescence monitor

The generation of HO radicals by acoustic cavitation in water was monitored by their reaction with terephthalic acid (TA) anion to produce fluorescent hydroxyterephthalate ions using a cleaning bath (38kHz) and a probe system (20, 40 and 60 kHz) as different sources of ultrasound. When using the ultrasonic bath as a source of energy for sonochemical studies, the shape of the reaction vessel is important. In the case of HO production from water (50 cm³), reaction in a conical flask (100 cm³) produces 2.75 times more radicals than a round-bottomed flask of the same capacity. The fluorescence yield (fluorescence intensity/ultrasound dosage) obtained using the conical flask and ultrasonic bath was similar to that for a probe operating at 40 kHz on the same volume of solution. For a probe system operating at 20, 40 and 60 kHz the greatest sonochemical efficiency was attained at the highest of these frequencies (60 kHz). For the probe system the fluorescence yield is directly proportional to power input and the concentration of TA. The fluorescence yield decreases as the temperature is increased.     

Mechanism and kinetics of the atmospheric degradation of 2-formylcinnamaldehyde with O3 and hydroxyl OH radicals – a theoretical study

In the present investigation, the reaction mechanism and kinetics of 2-formylcinnamaldehyde (2-FC) with O₃ and hydroxyl OH radicals were studied. The reaction of 2-FC with O₃ radical are initiated by the formation of primary ozonide, whereas the reaction of 2-FC with the hydroxyl OH radical are initiated by two different ways: (1). H-atom abstraction by hydroxyl OH radical from the –CHO and –CH = CHCHO group of 2-FC (2). Hydroxyl OH addition to the –CH = CHCHO group to the ring-opened 2-FC. These reactions lead to the formation of an alkyl radical. The reaction pathways corresponding to the reactions between 2-FC with O₃ and hydroxyl OH radicals have been analysed using density functionals of B3LYP and M06-2X level of methods with the 6-31+G(d,p) basis set. Single-point energy calculations for the most favourable reactive species are determined by B3LYP/6-311++G(d,p) and CCSD(T)/6-31+G(d,p) levels of theory. From the obtained results, the hydroxyl OH addition at C8 position of 2-FC are most favourable than the C9 position of 2-FC. The subsequent reactions of the alkyl radicals, formed from the hydroxyl OH addition at C8 position, are analysed in detail. The individual and overall rate constant for the most favourable reactions are calculated by canonical variational transition theory with small-curvature tunnelling corrections over the temperature range of 278–350 K. The calculated theoretical rate constants are in good agreement with the available experimental data. The Arrhenius plot of the rate constants with the temperature are fitted and the atmospheric lifetimes of the 2-FC with hydroxyl OH radical reaction in the troposphere calculate for the first time, which can be applied to the study on the atmospheric implications. The condensed Fukui function has been verified for the most favourable reaction sites. This study can be regarded as an attempt to investigate the O₃-initiated and hydroxyl OH-initiated reaction mechanisms of 2-FC in the atmosphere.     

Ultrasound-assisted covalent reaction of myofibrillar protein: The improvement of functional properties and its potential mechanism

The effects of the different combined manner of ultrasound and covalent reaction between polyphenol and myofibrillar protein (MP) from chicken were studied. More so, antioxidant activities, digestive properties, and potential mechanism of ultrasound-assisted oxidation system of hydrophilic ((−)-Epicatechin gallate, ECG) and hydrophobic (Baicalein, BN) polyphenols was also analyzed in this study. Among all the combined treatments, surface hydrophobicity (SUH), active sulfhydryl contents (ASC), and specific surface area (SSA) of ultrasonic assisted ECG oxidation group (T6) was relatively apparent, indicating that a more unfolding MP structure was obtained. Furthermore, ultrasonic assisted ECG oxidation group showed the highest antioxidant activities compared with other combined treatments on the basis of the results of DPPH free radical scavenging activities, metal ion chelating activities, and hydroxyl radicals (OH·) scavenging activities. The results of simulated digestion system and kinetic analysis also verified that ultrasonic assisted ECG oxidation had higher MP bio-accessibility than the control group. In contrast, a lower digestibility was displayed in ultrasonic assisted BN oxidation group. In summary, the ultrasound-assisted covalent reaction of MP and ECG might be a desirable approach for industrial production of MP from chicken with better antioxidant activities and digestive properties.     

Control of the temperature responsiveness of poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) copolymer using ultrasonic irradiation

Poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (poly(NIPAM-co-HEMA)) is a temperature-responsive copolymer that is expected to be applicable as an advanced functional polymeric material in various fields. In this study, a novel method was developed to control the responsive temperature of poly(NIPAM-co-HEMA) using an ultrasonic polymerization technique. Initially, the behavior of the reaction was investigated using NIPAM and HEMA monomers under ultrasonic irradiation. A high ultrasonic power was found to produce a high reaction rate and low number average molecular weight of the copolymer. The polydispersity of the synthesized copolymer was approximately 1.5 for all ultrasonic powers examined. In the early stage of the reaction, the molar fraction of NIPAM in the copolymer was lower than the initial molar fraction of the monomers. It was concluded that ultrasonic irradiation affected the initiation reaction and polymer degradation, but did not affect the propagation reaction. Furthermore, the effect of the ultrasonic irradiation conditions on the temperature responsiveness of the copolymer was investigated. The lower critical solution temperature (LCST) of the copolymer was found to increase with increasing ultrasonic irradiation time. In addition, in the early stages of the reaction, the measured values of the LCST were higher than the estimated values using copolymer composition. This can be attributed to some parts of the copolymer chain possessing a higher NIPAM fraction than the overall fraction due to different reactivities of the monomers and terminated radicals. This hypothesis was indirectly verified by the synthesis of a block copolymer from the PNIPAM homopolymer and HEMA monomer.     

Sonochemical-assisted synthesis of nano-structured lead dioxide

PbO(2) nano-powder was synthesized by the ultrasonic irradiation of an aqueous suspension of dispersed beta-PbO, as precursor, in the presence of ammonium peroxydisulfate as an oxidant. The reaction rate increased with an increase in temperature and ammonium peroxydisulfate concentration. In the presence of ammonium peroxydisulfate, the increased concentration of hydroxyl radical facilitated the oxidation of beta-PbO to PbO(2) under ultrasonic irradiation. The PbO(2) nano-powder was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). It was found that the applied ultrasonic wave determines the particle size. PbO(2) samples prepared under optimized experimental conditions have lead dioxide particles in the range of 50-100 nm, as shown by SEM. The XRD results reveal that only beta-PbO(2) is formed under optimum conditions. When the reaction mixture was stirred instead of ultrasonically irradiated, only a fraction of the lead oxide was converted to lead dioxide, and lead sulfate was the main reaction product.     

Aspects of ultrasonically assisted transesterification of various vegetable oils with methanol

The batch transesterification of vegetable oil with methanol, in the presence of potassium hydroxide as catalyst, by means of low frequency ultrasound (40 kHz) was studied with the aim of gaining more knowledge on intimate reaction mechanism. The concentration of fatty acid methyl esters, of mono-, di- and triglycerides of the actual reaction mixture were determined at short reaction time by HPLC. The effect of ultrasounds on the lipids transesterification correlated with triglyceride structures is discussed. It was found that under ultrasonic activation the rate-determining reaction switches from DG-->MG (classical mechanic agitation) to MG+ROH-->Gly+ME (ultrasonically driven transesterification).     

Kinetics analysis for development of a rate constant estimation model for ultrasonic degradation reaction of methylene blue

Ultrasound has been used as an advanced oxidation method for wastewater treatment. Sonochemical degradation of organic compounds in aqueous solution occurs by pyrolysis and/or reaction with hydroxyl radicals. Moreover, kinetics of sonochemical degradation has been proposed. However, the effect of ultrasonic frequency on degradation rate has not been investigated. In our previous study, a simple model for estimating the apparent degradation rate of methylene blue was proposed. In this study, sonochemical degradation of methylene blue was performed at various frequencies. Apparent degradation rate constant was evaluated assuming that sonochemical degradation of methylene blue was a first-order reaction. Specifically, we focused on effects of ultrasonic frequency and power on rate constant, and the applicability of our proposed model was demonstrated. Using this approach, maximum sonochemical degradation rate was observed at 490 kHz, which agrees with a previous investigation into the effect of frequency on the sonochemical efficiency value evaluated by KI oxidation dosimetry. Degradation rate increased with ultrasonic power at every frequency. It was also observed that threshold power must be reached for the degradation reaction to progress. The initial methylene blue concentration and the apparent degradation rate constant have a relation of an inverse proportion. Our proposed model for estimating the apparent degradation rate constant using ultrasonic power and sonochemical efficiency value can apply to this study which extended the frequency and initial concentration range.     

Calculation of parameters of a multimolecular complex for nonequilibrium surface ionization of its fragments

Field surface ionization of radicals formed as a result of exothermal heterogeneous reaction in a vibrationally excited state is investigated. Such radicals are ionized in accordance with the mechanism of nonequilibrium surface ionization. The parameters of a multimolecular complex (the number of molecules in the complex and the number of its effective degrees of freedom) preceding the formation of radicals are calculated from the temperature dependences of ion currents. The values of these parameters coincide with analogous values of the quantities calculated for ions of the radicals formed in the same reaction, but having an equilibrium energy distribution.     

Individual and combined effects of ultrasound, ozone and UV irradiation: a case study with textile dyes

Comparative degradation of azo dyes by 520 kHz ultrasonic irradiation and its combinations with ozone and/or ultraviolet light (UV) was investigated using a probe dye C.I. Acid Orange 7. Operation parameters such as ultrasonic power density, ozone flow, UV intensity, and type and injection mode of the bubbling gas were optimized based on the rate of absorption decay in the visible and UV bands as estimated by regression analysis of absorption-time data. At equivalent initial dye concentrations and contact times, individual effects of UV irradiation, ultrasound and ozone were "no effect", "bleaching", and "bleaching/organic carbon degradation", respectively. UV irradiation, however, was found to induce a catalytic effect when applied in combination with either ultrasound or ozone schemes; and the overall degradation process was most rapid under simultaneous operation of the three in the presence of a continuous flow of a gas mixture made of argon and oxygen. The synergy observed in combined schemes was attributed to enhanced ozone diffusion by mechanical effects of ultrasound, and the photolysis of ultrasound-generated H(2)O(2) to produce hydroxyl radicals.     

Degradation of Acid Blue 25 in aqueous media using 1700 kHz ultrasonic irradiation: ultrasound/Fe(II) and ultrasound/H2O2 combinations

In this work, the sonolytic degradation of an anthraquinonic dye, C.I. Acid Blue 25 (AB25), in aqueous phase using high frequency ultrasound waves (1700 kHz) for an acoustic power of 14 W was investigated. The sonochemical efficiency of the reactor was evaluated by potassium iodide dosimeter, Fricke reaction and hydrogen peroxide production yield. The three investigated methods clearly show the production of oxidizing species during sonication and well reflect the sonochemical effects of high frequency ultrasonic irradiation. The effect of operational conditions such as the initial AB25 concentration, solution temperature and pH on the degradation of AB25 was studied. Additionally, the influence of addition of salts on the degradation of dye was examined. The rate of AB25 degradation was dependent on initial dye concentration, pH and temperature. Addition of salts increased the degradation of dye. Experiments conducted using distilled and natural waters demonstrated that the degradation was more efficient in the natural water compared to distilled water. To increase the efficiency of AB25 degradation, experiments combining ultrasound with Fe(II) or H₂O₂ were conducted. Fe(II) induced the dissociation of ultrasonically produced hydrogen peroxide, leading to additional OH radicals which enhance the degradation of dye. The combination of ultrasound with hydrogen peroxide looks to be a promising option to increase the generation of free radicals. The concentration of hydrogen peroxide plays a crucial role in deciding the extent of enhancement obtained for the combined process. The results of the present work indicate that ultrasound/H₂O₂ and ultrasound/Fe(II) processes are efficient for the degradation of AB25 in aqueous solutions by high frequency ultrasonic irradiation.     

Degradation,isomerization and stabilization of three dicaffeoylquinic acids under ultrasonic treatment at different pH

Dicaffeoylquinic acids (diCQAs) are found in a variety of edible and medicinal plants with various biological activities. An important issue is the low stability of diCQAs during extraction and food processing, resulting in the degradation and transformation. This work used 3,5-diCQA as a representative to study the influence of different parameters in ultrasonic treatment on the stability of diCQAs, including solvent, temperature, treatment time, ultrasonic power, duty cycle, and probe immersion depth. The generation of free radicals and its influence were investigated during the treatment. The stability of three diCQAs (3,5-diCQA, 4,5-diCQA and 3,4-diCQA) under the certain ultrasonic condition at different pH conditions was evaluated and found to decrease with the increase of pH, further weakened by ultrasonic treatment. Ultrasound was found to accelerate the degradation and isomerization of diCQAs. Different diCQAs showed different pattern of degradation and isomerization. The stability of diCQAs could be improved by adding epigallocatechin gallate and vitamin C.