Velocity distributions in a micromixer measured by NMR imaging

Velocity distributions (so-called propagators) with two-dimensional spatial resolution inside a chemical micromixer were measured by pulsed-field-gradient spin-echo (PGSE) nuclear magnetic resonance (NMR). A surface coil matching the volume of interest was built to enhance the signal-to-noise ratio. This enabled the acquisition of velocity maps with a very high spatial resolution of 29 μm × 39 μm. The measured propagators are compared with theoretical distributions and a good agreement is found. The results show that the propagator data provide much richer information about flow behaviour than conventional NMR velocity imaging and the information is essential for understanding the performance of a micromixer. It reveals, for example, deviations in the shape and size of the channel structures and multicomponent flow velocity distribution of overlapping channels. Propagator data efficiently compensate lost information caused by insufficient 3D resolution in conventional velocity imaging.     

Mid-scale free-flow electrophoresis with gravity-induced uniform flow of background buffer in chamber for the separation of cells and proteins

A large-scale free-flow electrophoresis (LS-FFE) is often too large for cell separation of lab scale, whereas micro-FFE (μFFE) has great difficulty in cell isolation due to easy blockage by cell accumulation in μFFE. In this study, a mid-scale FFE (MS-FFE) is developed for cell and protein separations. The volume of the separation chamber (70×40×0.1-0.8 mm) is from 280 μL to 2.24 mL, much lower than that in an LS-FFE but higher than that in a μFFE. Gravity is used for uniform flow of the background buffer only via a single pump with 16 channels and the sample is injected via an adjuster originally used for clinical intravenous injection. The experiments reveal that the hydrodynamic and electrohydrodynamic flows are much stable, and the Joule heat can be effectively dispersed without obvious positive or negative deviation as shown by the omega plots. By the device, Escherichia coli and Staphylococcus aureus, which easily accumulate to block μFFE and are separated with difficulty due to their same negative charges carried, can be well isolated under the conditions of 4.5 mM pH 8.5 Tris-boric buffer (4.5 mM Tris, 4.5 mM boric acid) with 0.10 mM ethylene diamine tetraacetic acid and 5% m/v sucrose, 200 μL/min, 800 V, and sample injection via inlet 4. The mid-scale FFE device could also be used for the separation of three model proteins of horse heart cytochrome c, myoglobin and bovine serum albumin. The device has clear significance for mid-scale separation of cells and proteins.     

On the minimization of the band-broadening contributions of a modern, very high pressure liquid chromatograph

The contributions of the volume of sample injected, the mobile phase flow rate, the inner diameter of the needle seat capillary and that of the connector capillary, the heat exchanger, and the detector cell volume to the widths of bands eluted from the 1290 Infinity HPLC instrument were investigated in depth. Four sample volumes (0.16, 0.80, 4.0, and 20 μL), three flow rates (0.04, 0.4, and 4.0 mL/min), two needle seat capillary I.D. (100 mm × 115 and 140 μm), three sets of connector capillary I.D. (350 mm × 80, 115, and 140 μm placed upstream the column, and 220 mm × 80, 115, and 140 μm downstream the column), two UV detector cell volumes (0.8 and 2.4 μL), and the presence/absence of the heat exchanger (1.6 μL) between the inlet connector capillary tube and the column were combined to generate up to 4 × 3 × 2 × 3 × 2 × 2=288 system configurations for this instrument. For each configuration, 5 consecutive injections were performed in order to assess the injection-to-injection repeatability, providing 1440 elution band profiles which are analyzed. The results demonstrate that the band broadening contribution of the instrument depends mostly on the detector cell volume and on the inner diameter of the needle seat capillary tube. The impact of these two contributions is particularly important at high flow rates (4 mL/min). Best efficiencies are obtained with a small sample volume, below 1 μL, which avoids volume overload of the instrument, or with large sample volumes, which maximize the radial concentration gradients of the sample across the instrument channels, in the vicinity of the anfractuosities of the channel walls. The injection of large sample volumes reveals the imperfection of current injection systems, the performance of which is remote from the one expected to provide an ideal rectangular injection (～+4 μL(2)). Although the present behavior of the instrument is satisfactory, serious improvements would become necessary to operate the next generation of more efficient columns that might be commercialized soon.     

High-performance computing of flow and transport in physically reconstructed silica monoliths

This work presents an approach towards resolving hydrodynamic flow in real porous media by carrying out direct numerical simulations in the reconstructed macroporous (flow-through) domain of a silica monolith. The macroporous domain of a 60 μm × 60 μm × 12 μm segment of a 100 μm i.d. capillary silica monolith was reconstructed by confocal laser scanning microscopy. A 60 μm × 12 μm × 12 μm segment of the reconstructed domain was then used as the 3D matrix for simulation of fluid flow by the lattice-Boltzmann method on a high-performance computing platform. Excellent agreement is observed between the experimental and simulated Darcy permeabilities without any assumptions or further adjustments on the monolith morphology. The flow velocity field is analyzed in detail, including longitudinal and transverse velocity distributions, the occurrence of negative longitudinal velocities, as well as the beginning transition to the viscous-inertial flow regime. The presented methodology promises great potential for resolving the key relationships between morphology and band broadening in monolithic columns for HPLC applications.     

Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear

A simple, rapid and sensitive method for the determination of pirimicarb in tomato and pear using polymer monolith microextraction (PMME) based on the molecularly imprinted polymer (MIP) monolith combined with high-performance liquid chromatography-photodiodes array detector (HPLC-PAD) was developed. By optimizing the polymerization conditions, such as the nature of porogenic solvent and functional monomer, the molar ratio of the monomer and cross-linker, an pirimicarb MIP monolith was synthesized in a micropipette tip using methacrylic acid (MAA) as the functional monomer, ethylene dimethacrylate (EGDMA) as the cross-linker and the mixture of toluene-dodecanol as the porogenic solvent. The MIP monolith showed highly specific recognition for the template pirimicarb. The monolith was applied for the selective extraction of pirimicarb in tomato and pear. Several parameters affecting MIP-PMME were investigated, including the nature and volume of extraction solvent, sample volume, flow rate and sample pH. Under the optimum PMME and HPLC conditions, the linear ranges were 2.0-1400 μg/kg for pirimicarb in tomato and pear with the correlation coefficient of above 0.999. The detection limits (s/n=3) were both 0.6 μg/kg. The proposed method was successfully applied for the selective extraction and determination of pirimicarb in tomato and pear.     

C18‐bound porous silica monolith particles as a low‐cost high‐performance liquid chromatography stationary phase with an excellent chromatographic performance

Ground porous silica monolith particles with an average particle size of 2.34 μm and large pores (363 Å) exhibiting excellent chromatographic performance have been synthesized on a relatively large scale by a sophisticated sol–gel procedure. The particle size distribution was rather broad, and the d(0.1)/d(0.9) ratio was 0.14. The resultant silica monolith particles were chemically modified with chlorodimethyloctadecylsilane and end‐capped with a mixture of hexamethyldisilazane and chlorotrimethylsilane. Very good separation efficiency (185 000/m) and chromatographic resolution were achieved when the C₁₈‐bound phase was evaluated for a test mixture of five benzene derivatives after packing in a stainless‐steel column (1.0 mm × 150 mm). The optimized elution conditions were found to be 70:30 v/v acetonitrile/water with 0.1% trifluoroacetic acid at a flow rate of 25 μL/min. The column was also evaluated for fast analysis at a flow rate of 100 μL/min, and all the five analytes were eluted within 3.5 min with reasonable efficiency (ca. 60 000/m) and resolution. The strategy of using particles with reduced particle size and large pores (363 Å) combined with C₁₈ modification in addition to partial‐monolithic architecture has resulted in a useful stationary phase (C₁₈‐bound silica monolith particles) of low production cost showing excellent chromatographic performance.     

Improved sulfoalkylbetaine‐based organic‐silica hybrid monolith for high efficient hydrophilic interaction liquid chromatography of polar compounds

A novel sulfoalkylbetaine‐based zwitterionic organic‐silica hybrid monolith was synthesized by using 3‐dimethyl‐(3‐(N‐methacrylamido) propyl) ammonium propane sulfonate (DMMPPS, neutral sulfoalkyl‐betaine monomer). The added amount of zwitterionic monomer was significantly increased when DMMPPS was used instead of the conventionally used acidic sulfoalkyl‐betaine monomer, that is, the N,N‐dimethyl‐N‐ methacryloxyethyl‐N‐(3‐sulfopropyl) ammonium betaine, and this led to a significantly improved hydrophilicity of the monolith. The DMMPPS‐based organic‐silica hybrid monolith exhibited good mechanical stability and excellent separation performance. About ～20 μm plate height (corresponding to column efficiency of ～50 000 plates/m) was obtained for nucleoside at the linear velocity of 1 mm/s. The proposed monolithic column was successfully applied to separate purines/pyrimidines, nucleotides, and tryptic digest of bovine hemoglobin in a nano‐HILIC mode, and the results demonstrated that such monolith has the potential for separation of a variety of hydrophilic substances.     

The impact of extra-column band broadening on the chromatographic efficiency of 5 cm long narrow-bore very efficient columns

Small columns packed with core-shell and sub-2 μm totally porous particles and monolith columns are very popular to conduct fast and efficient chromatographic separations. In order to carry out fast separations, short (2-5 cm) and narrow-bore (2-2.1 mm) columns are used to decrease the analyte retention volume. Beside the column efficiency, another significant issue is the extra-column band-spreading. The extra-column dispersion of a given LC system can dramatically decrease the performance of a small very efficient column. The aim of this study was to compare the extra-column peak variance contribution of several commercially available LC systems. The efficiency loss of three different type 5 cm long narrow bore, very efficient columns (monolith, sub-2 μm fully porous and sub-2 μm core-shell packing) as a function of extra-column peak variance, and as a function of flow rate and also kinetic plots (analysis time versus apparent column efficiency) are presented.     

Selective and sensitive determination of protoberberines by capillary electrophoresis coupled with molecularly imprinted microextraction

In this work, we developed a novel molecularly imprinted solid‐phase microextraction with capillary electrophoresis method for the selective extraction and determination of protoberberines in complicated samples. The imprinted monolith was prepared in a micropipette tip‐based device by using acrylamide as the functional monomer, ethyleneglyoldimethacrylate as the cross‐linker and dimethylsulfoxide as the porogen, and exhibited an imprinting factor of 2.41 to berberine, 2.36 to palmatine and 2.38 to jatrorrhizine. Good capillary electrophoresis separation was achieved by using 20 mM phosphate buffer at pH 7 as running buffer with the addition of organic modifier of 10% methanol. Parameters such as sample pH value, sample flow rate and sample volume were investigated for imprinted monolith‐based solid‐phase microextraction. An imprinted solid‐phase microextraction with capillary electrophoresis method was developed, the method showed a wide linear range (0.3–50 μg/mL), good linearity (R² ≥ 0.9947) and good reproducibility (relative standard deviations ≤ 0.73%), the limit of detection was as low as 0.1 μg/mL, which was lower than some reported methods based on capillary electrophoresis for protoberberines. The method has been applied for determination of three common protoberberines in Cortex Phellodendri Chinensis, by using a molecularly imprinted monolith as the selective sorbent, most of the matrices in the Cortex Phellodendri Chinensis sample were removed and three protoberberines were selectively enriched and well determined.     

Preparation and evaluation of a phenylboronate affinity monolith for selective capture of glycoproteins by capillary liquid chromatography

A phenylboronate affinity monolith was prepared and applied to the selective capture of glycoproteins from unfractionated protein mixtures. The monolith was synthesized in a 100 μm i.d capillary by an in situ polymerization procedure using a pre-polymerization mixture consisting of 4-vinylphenylboronic acid (VPBA) as functional monomer, ethylene dimethacrylate (EDMA) as crosslinker, diethylene glycol and ethylene glycol as binary porogenic solvents, and azobisisobutyronitrile (AIBN) as initiator. The prepared monolith was characterized in terms of the morphology, pore property, and recognition property. The selectivity and dynamic binding capacity were evaluated by using standard glycoproteins and nonglycoproteins as model proteins. The chromatographic results demonstrated that the phenylboronate affinity monolith had higher selectivity and binding capacity for glycoprotein than nonglycoprotein. The resulting phenylboronate affinity monolith was used as the sorbent for in-tube solid phase microextraction (in-tube SPME), and the extraction performance of the monolith was assessed by capture of ovalbumin from egg white sample.     

烷基酚聚氧乙烯醚在不同液相色谱分离模式中的分离研究

考察了烷基酚聚氧乙烯醚在反相色谱、正相键合色谱、硅胶吸附色谱、体积排阻色谱4种不同液相色谱分离模式中的分离效果,分别采用Kromasil C_(18)(250 mm× 4.6 mm,5 μm)、Agilent ZORBAX NH2(250 mm× 4.6 mm,5 μm)、Waters Spherisorb S3W(150 mm×2.0 mm,3 μm)和Shodex MSpak GF-310 2D(150 mm×2.0 mm,5 μm)色谱柱,以225 nm为紫外检测波长,对不同液相色谱分离模式的流动相组成、梯度洗脱条件、柱温、流速等进行了优化,并对烷基酚聚氧乙烯醚在不同液相色谱分离模式中的保留机理进行了初步探讨.结果表明,正相键合色谱实现了烷基酚聚氧乙烯醚的最佳分离;硅胶吸附色谱和体积排阻色谱的分离效果较正相键合色谱稍差.     

Polymer Monolith Microextraction Coupled with HPLC for Determination of Jasmonates in Wintersweet Flowers

A simple, fast, and effective method has been presented for the determination of jasmonates in plant samples by polymer monolith microextraction (PMME). A poly (methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith-based device was developed for extraction, purification, and concentration; HPLC-UV was used for evaluation. To realize the best microextraction efficiency, parameters such as sample pH value, flow rate, and sample volume were systematically examined and optimized. Aqueous solution (5 mL) of jasmonates at pH 3.0 was selected as sample solution, and loaded onto the monolith at flow rate of 0.15 mL/min; finally, 50 μL of acetonitrile was used for elution. The proposed method exhibited impressive enrichment efficiency (almost 100-fold) and the limits of detection for jasmonic acid and methyl jasmonate obtained 0.5 and 2 ng/mL by using UV detection. Wide linear ranges were also observed (2–2000 and 5–2000 ng/mL) for both jasmonic acid and methyl jasmonate, with R² > 0.999. The developed PMME-HPLC method was successfully applied to the determination of jasmonates in fresh wintersweet flowers with recoveries in the range of 91.9–97.2%. The result was confirmed by an HPLC-MS method. The PMME method was also compared with a conventional C18-SPE method and exhibited better clean-up efficiency.     

CFB煤燃烧/热解双反应器中热解室对立管内气固流动特性的影响

考察了循环流化床煤燃烧/热解双反应器系统中热解室的存在对立管内的压力分布及气固流动状况的影响。提升管的内径100 mm、高6 m，立管的内径44 mm、高3 m，热解室的截面积200 mm×200 mm、高770 mm。结果表明，随着提升管内表观气速Ur的增加，有无热解室立管内均为负压差流动，负压差梯度随着Ur的增加而减小。有热解室时，热解室内要保持一定的料位高度，整个立管内固体颗粒的流动为负压差移动床流动；没有热解室时，立管内为稀相流动和移动床流动同时存在，立管内平衡料柱高度随Ur的增加而升高。随着循环量Gs的增加，两种类型的立管内负压差梯度均随之增大，也存在着流动形态的差别。循环量Gs的增加会引起立管内平衡料柱高度的降低。立管内气固相对滑移速度也随着循环量Gs的增加而增大。     

Molecularly imprinted monolith coupled on-line with high performance liquid chromatography for simultaneous quantitative determination of cyromazine and melamine

We report a novel method for simultaneous determination of cyromazine and melamine based on a molecularly imprinted monolith on-line coupled with high performance liquid chromatography (HPLC). The imprinted monolith was prepared by in situ polymerization using 2,4-diamino-6-undecyl-1,3,5-triazine (DAUTA) as a mimic template. Due to the better solubility of DAUTA in chloroform, hydrogen bonds were effectively developed between the template and the functional monomer and resulted in the formation of highly specific cavities in the obtained imprinted monolith. With methanol as the loading solvent, cyromazine and melamine were both selectively retained by the obtained imprinted monolith, while the nonspecific adsorption on the non-imprinted monolith was negligible. The imprinted monolithic column was on-line coupled with HPLC for purification and concentration of the two analytes from milk samples. To minimize the peak broadening during the on-line transfer of the analytes from the imprinted monolith to the following analytical column, a successive desorption program was developed for the elution step, which enabled on-line stacking of the target compounds before being analyzed by HPLC. Low detection limits of 0.12 μg mL(-1) for melamine and 0.05 μg mL(-1) for cyromazine were achieved with only 0.3 mL of milk sample and a low sensitivity HPLC-UVD instrument. The method may be further extended to detect other analytes of interest in a large variety of samples.     

Synthesis of a monolithic, micro-immobilised enzyme reactor via click-chemistry

An immobilised enzyme reactor (IMER) in the form of capillary monolith was developed for a micro-liquid chromatography system. The plain monolith was obtained by in situ thermal copolymerisation of glycidyl methacrylate and ethylene dimethacrylate in a fused silica capillary (200 × 0.53 mm ID) by using n-propanol/1,4-butanediol as porogen. The enzyme, α-chymotrypsin (CT), was covalently attached onto the monolith via triazole ring formation by click-chemistry. For this purpose, the monolithic support was treated with sodium azide and reacted with the alkyne carrying enzyme derivative. CT was covalently linked to the monolith by triazole-ring formation. The activity behaviour of monolithic IMER was investigated in a micro-liquid chromatography system by using benzoyl-L-tyrosine ethyl ester (BTEE) as synthetic substrate. The effects of mobile-phase flow rate and substrate feed concentration on the final BTEE conversion were investigated under steady-state conditions. In the case of monolithic IMER, the final substrate conversion increased with increasing feed flow rate and increasing substrate feed concentration. Unusual behaviour was explained by the presence of convective diffusion in the macropores of monolith. The results indicated that the monolithic-capillary IMER proposed for micro-liquid chromatography had significant advantages with respect to particle-based conventional high-performance liquid chromatography-IMERs.     

Mechanical disruption of mammalian cells in a microfluidic system and its numerical analysis based on computational fluid dynamics

The lysis of mammalian cells is an essential part of different lab-on-a-chip sample preparation methods, which aim at the release, separation, and subsequent analysis of DNA, proteins, or metabolites. Particularly for the analysis of compartmented in vivo metabolism of mammalian cells, such a method must be very fast compared to the metabolic turnover-rates, it should not affect the native metabolite concentrations, and should ideally leave cell organelles undamaged. So far, no such a method is available. We have developed a microfluidic system for the effective rapid mechanical cell disruption and established a mathematical model to describe the efficiency of the system. Chinese hamster ovary (CHO) cells were disrupted with high efficiency by passing through two consecutive micronozzle arrays. Simultaneous cell compression and shearing led to a disruption rate of ≥90% at a sample flow rate of Q = 120 μL min(-1) per nozzle passage, which corresponds to a mean fluid velocity of 13.3 m s(-1) and a mean Reynolds number of 22.6 in the nozzle gap. We discussed the problem of channel clogging by cellular debris and the resulting flow instability at the micronozzle arrays. The experimental results were compared to predictions from Computational Fluid Dynamics (CFD) simulations and the critical energy dissipation rate for the disruption of the CHO cell population with known size distribution was determined to be 4.7 × 10(8) W m(-3). Our model for the calculation of cell disruption on the basis of CFD-data could be applied to other microgeometries to predict intended disruption or undesired cell damage.     

新型强阳离子交换聚合物整体柱的制备及其在奶制品中三聚氰胺测定中的应用

在内径为530 μm的石英毛细管中原位聚合得到一种新的强阳离子交换聚合物整体柱2-丙烯酰胺-2-甲基-1-丙磺酸-乙二醇二甲基丙烯酸酯聚合物(poly(AMPS-co-EDMA))整体柱,并将其作为聚合物整体柱微萃取(PMME)的萃取介质。优化N,N-二甲基甲酰胺(DMF)和聚乙二醇(PEG)致孔体系的比例,制备得到的poly(AMPS-co-EDMA)整体柱渗透性好、机械强度高且在水溶液中具有良好的稳定性。通过考察样品溶液的pH值、盐浓度和有机溶剂含量对萃取效率的影响,证明该整体柱主要通过强阳离子交换和疏水相互作用对三聚氰胺进行萃取富集。在PMME与高效液相色谱联用技术的基础上,建立了检测奶制品中三聚氰胺含量的分析方法。奶制品中三聚氰胺的检出限和定量限分别为0.09 mg/kg和0.3 mg/kg,在0.5~80 mg/kg的含量范围内具有良好的线性关系,日内、日间测定的相对标准偏差不高于7.5%。结果表明,该方法简便、快速、灵敏度高且成本低,适合于奶制品中微量三聚氰胺的检测。     

Experimental investigation of the flow induced by artificial cilia

The fluid transport produced by rectangular shaped, magnetically actuated artificial cilia of 70 μm length and 20 μm width was determined by means of phase-locked Micro Particle Image Velocimetry (μPIV) measurements in a closed microfluidic chamber. The phase-averaged flow produced by the artificial cilia reached up to 130 μm s(-1) with an actuation cycle frequency of 10 Hz. Analysis of the measured flow data indicate that the present system is capable of achieving volume flow rates of V[combining dot above](cilia) = 14 ± 4 μl min(-1) in a micro channel of 0.5 × 5 mm(2) cross-sectional area when no back pressure is built up. This corresponds to an effective pressure gradient of 6 ± 1 Pa m(-1), which equals a pressure difference of 0.6 ± 0.1 mPa over a distance of 100 μm between two rows of cilia. These results were derived analytically from the measured velocity profile by treating the cilia as a thin boundary layer. While the cilia produce phase-averaged velocities of the order of O(10(2)μm s(-1)), time-resolved measurements showed that the flow field reverses two times during one actuation cycle inducing instantaneous velocities of up to approximately 2 mm s(-1). This shows that the flow field is dominated by fluid oscillations and flow rates are expected to increase if the beating motion of the cilia is further improved.     

Use of peak decay analysis and affinity microcolumns containing silica monoliths for rapid determination of drug-protein dissociation rates

This report examined the use of silica monoliths in affinity microcolumns containing human serum albumin (HSA) to measure the dissociation rates for various drugs from this protein. Immobilized HSA and control monolith columns with dimensions of 1 mm × 4.6 mm i.d. were prepared for this work and used with a noncompetitive peak decay method. Several drugs known to bind HSA were examined, such as warfarin, diazepam, imipramine, acetohexamide, and tolbutamide. Items that were studied and optimized in this method included the sample volume, sample concentration, and elution flow rate. It was found that flow rates up to 10 mL/min could be used in this approach. Work with HSA silica monoliths at these high flow rates made it possible to provide dissociation rate constants for drugs such as warfarin in less than 40s. The dissociation rate constants that were measured gave good agreement with values reported in the literature or that had been obtained with other solutes that had similar binding affinities for HSA. This approach is a general one that should be useful in examining the dissociation of other drugs from HSA and in providing a high-throughput method for screening drug-protein interactions.     

Characterization of Convection for Molecularly Imprinted Monolith

Convection of molecularly imprinted polymers monolith in LC mode was discussed in this paper. On the MIPs monolith reported here, a flat van Deemter plot of height equivalent to a theoretical plate (HETP) versus superficial velocity was observed. This typical behavior, similar to perfusion packings, suggests that the unique pore structure of the MIPs monolith allowed convection-enhanced mass transfer. Column parameters, e.g., external porosities, internal porosity, column permeability and equivalent sphere dimension, were obtained. Intraparticle Peclet number (λ) was used to characterize the convection in the monolith. In addition, a ratio of the numbers of transfer units, T, for diffusion in the micropores and through-pores has been introduced to quantify the relative importance of the contribution from convection and diffusion to mass transfer. The results show that the flow in a MIP monolith is extremely sensitive to pore size distribution and can be tuned by polymerization parameters.