Crystal Morphology of Water-Assisted Injection Molded High-Density Polyethylene with Two Different Molecular Weights

The crystal morphology of water-assisted injection molded (WAIM) parts of high-density polyethylene (HDPE) with two different molecular weights was investigated. The results showed that for the WAIM parts of HDPE with higher molecular weight, oriented lamellar structures formed in the outer layer, whereas spherulites formed in the core and inner layers, at positions both near the water inlet and near the end of the water channel. However, for the WAIM parts of HDPE with lower molecular weight, spherulites formed in all three layers at a position near the water inlet, whereas oriented lamellar structures formed in the outer layer and banded spherulites were dominant in both core and inner layers at a position near the end of the water channel. The crystal morphology development was interpreted with the aid of stress and temperature fields within the mold cavity under melt filling and high-pressure water penetration during the WAIM.     

天然文石质陶瓷-三角帆蚌贝壳的FTIR光谱研究

三角帆蚌贝壳珍珠层及韧带经粉末XRD分析证实均由文石组成。对珍珠层及韧带的FTIR光谱进行了测量和对比分析。结果表明：(1)文石的ν₂,ν₃带显示了较大的变化,相对韧带而言,珍珠层文石的ν₂带频率蓝移6.5 cm-1,而ν₃带却红移22.7 cm-1;(2)珍珠层文石的ν₂,ν₃带半高宽分别比韧带文石宽1倍左右。相比之下,珍珠层及韧带文石的ν₁,ν₄带的特征基本没有发生变化。文石红外光谱的这种各向异性的变化可能是由文石的粒径效应引起的。     

The structure of the fibrous tissue on the articular surface of the temporal bone in the monkey (Macaca mulatta)

The articulating surface of bones which ossify in mesenchyme, like the mandible, is covered by a layer of dense, fibrous tissue. The purpose of the present study was to examine the structure of the fibrous tissue on the surface of the articular surface of the temporal bone in the monkey. Young Rhesus monkeys (Macaca mulatta) were perfused with glutaraldehyde-paraformaldehyde. The specimens were demineralized in 0.5M EDTA. Small pieces of fibrous tissue and underlying bone were dissected out and processed for light and electron microscopy. The mandibular fossa is shallower and the articular eminence flatter in the monkeys as compared to humans. The articular part of the temporal bone is covered by a layer of avascular, soft tissue extending from the surface to the underlying bone. The tissue can be divided into three zones which gradually merge into one another. The zone facing the articular cavity consists of dense, fibrous tissue with layers of collagen fibers, oriented parallel to the articular surface, but at angles to each other. Fibers thought to be elastic fibers oriented parallel with the collagen fibers are also observed, particularly close to the surface, and their function is probably to impart resilience to the fibrous articular tissue. Between the fibers scattered cells with an ample rough endoplasmic reticulum are present. A thin layer of granular appearance is often observed on the surface. This layer may be of importance in joint lubrication. The second zone is more cell rich and the cells have long slender cellular processes and are surrounded by a dense collagenous matrix with an irregular orientation. These cells are probably precursor for the underlying cartilage but, not for the cells in the outer articular layer. In the third zone next to the bone the fibrous tissue gradually turns into cartilage. The cartilagenous zone is narrow, sometimes absent and is replaced by bone tissue. In some areas chondroclasts are observed, with forming osteons with osteoid seams. These observations indicate that remodeling is taking place and that cartilage is replaced by bone. The three zones observed correspond to findings in the mandibular condyle, but the zones are not as constant and distinct as in the condyle, and this reflects the adaptive role of the temporal bone in the growth of the temporomandibular joint.     

焦炉上升管内壁结焦炭层的光谱学分析及结焦机理研究

以焦炉上升管内壁结焦炭层块为研究对象，采用X射线荧光光谱仪（XRF）、X射线衍射仪（XRD）、傅里叶红外光谱仪（FTIR）和激光共聚焦拉曼光谱仪（Raman）对结焦炭层的元素组成，以及各结焦炭层的矿物组成、组成结构和分子结构进行测试。分析从结焦炭层块外表面向内表面过渡的各结焦炭层的差异性，揭示焦炉上升管内壁结焦机理。结果表明焦炉上升管内粉尘中Fe，S和Cr极易催化荒煤气中蒽、萘等稠环芳烃化合物成炭，在焦炉上升管内壁形成炭颗粒沉积，为焦油凝结挂壁提供载体，在荒煤气温度降至结焦温度时易结焦积碳。结焦炭层均含有芳香层结构，随着结焦炭层从外表面向内表面过渡，各结焦炭层的面层间距(d₀₀₂)逐渐降低、层片直径(L_a)先降低后增加、层片堆砌高度(Lc)和芳香层数(N)先稳定后增加。结焦炭层石墨化过程是由结焦炭层内表面向外表面进行，主要包括其片层外缘的羧基和部分C-O结构的降解剥离，从而形成高度规整的共轭结构。结焦炭层块中C元素是以结晶碳与无定型碳的混合物形式存在。以上研究为解决焦炉上升管内壁结焦及腐蚀问题，提高换热器换热效率，有效回收焦炉荒煤气显热，降低焦化企业能耗提供实验基础和理论依据。     

Structural transformation of vapor grown carbon nanofibers studied by HRTEM

Vapor grown carbon nanofibers have been extensively manufactured and investigated in recent years. In this study commercially available vapor grown carbon nanofibers subjected to different processing and post processing conditions were studied employing high resolution TEM images. The analysis showed that the fibers consist primarily of conical nanofibers, but can contain a significant amount of bamboo nanofibers. Most conical nanofibers were found to consist of an ordered inner layer and a disordered outer layer, with the cone angle distribution of the inner layers indicating that these cannot have a stacked cone structure but are compatible with a cone-helix structure. Fibers that have been heat treated to temperatures above 1,500 °C undergo a structural transformation with the ordered inner layers changing from a cone-helix structure to a highly ordered multiwall stacked cone structure. The bamboo nanofibers were found to have a tapered multiwall nanotube structure for the wall and a multishell fullerene structure for the cap of each segment, surrounded by a disordered outer layer. When these fibers are heat treated the disordered outer layers transform to an ordered multiwall nanotube structure and merge with the wall of each segment. The end caps of each segment transform from a smooth multiwall fullerene structure to one consisting of disjointed graphene planes. A reaction-diffusion mechanism is proposed to explain the growth and structure of the bamboo nanofibers.     

65T脉冲强磁体设计与实验研究

研制并实验测试一台65T脉冲强磁场磁体。磁体线圈采用14层纯铜导线与Zylon纤维交替缠绕而成,内绕组采用分布式加固技术,实现应力分布的优化,外层由不锈钢套筒与碳纤维加固。内外绕组分别采用两种不同横截面导线平衡能量分布,实现内外绕组温度分布相对均匀,避免局部过热。磁体孔径为12mm,高为120mm,通过1MJ/3.2mF/25kV高储能密度电容器供电,在20.6kV电压时,获得了磁感应强度为65T、持续时间为20ms的脉冲磁场。     

Crystallization in organo-mineral micro-domains in the crossed-lamellar layer of Nerita undata (Gastropoda, Neritopsina)

Crossed-lamellar shell microstructure consists of a sophisticated arrangement of interspersed lamellae, which is very commonly found in Gastropoda or Bivalvia shell layers. Its smallest constitutive microstructural units are usually described as sub-micrometric fibers, or rods, and form very ordered and regular patterns. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) imaging confirms the presence of even smaller building units in the form of organo-mineral granules, and we further investigate their internal structure within aragonite crossed-lamellar internal layer of Nerita undata (Gastropoda, Neritopsina) shell. Their coalescence may have controlled anisotropically the propagation of the crystallographic coherence through this complex microstructure, as suggested by the propagation of the microtwinning pattern between neighboring granules.     

Optimization of the Doped Ablator Layers for the Plastic Ignition Capsule

The paper investigates theoretically the optimization of the doped ablator layers for the plastic ignition capsule. The high-resolved one-dimensional implosion simulations show that the inner pure CH layer of the Si-doped design is excessively preheated by the hard x-ray, leading to the unstable ablator-fuel interface compared to the Ge-doped capsule. This is because that the Si K-shell absorption edge (1.8 keV) is higher than the Ge L-edge (1.3 keV), and Si dopant makes more hard x-ray penetrate through the doped ablator layers to preheat the inner pure CH layer. So an optimization of the doped ablator layers (called "Si/Ge capsule") is performed: an Si-doped CH layer is placed next to the outer pure CH layer to keep the high implosion velocity; next to the Si-doped layer is a thin Ge-doped layer, in order to absorb the hard x-ray and protect the inner undoped CH-layer from excessively preheating. The simulations show that the Si/Ge capsule can effectively improve hydrodynamic stability at the ablator-fuel interface while keeping the high implosion velocity.     

Analysis of the acoustic field excited by a vibrosource in an elastic layer and ambient medium

The results of numerical analysis of the acoustic field excited in an elastic layer and in ambient media by an oscillating infinitely extensive point dipole source with the moment oriented parallel to the laminar structure layers are given. Spatial distribution of the amplitude of the SH-wave field, propagating in the direction perpendicular to the moment, in the layer and beyond it is analyzed. The problem is solved in a two-dimensional statement at different ratios of parameters of elastic rigidity of the inner and outer regions of the laminar structure at different vibrational frequencies.     

Ultrastructural analysis of Wuchereria bancrofti (Nematoda: Filarioidea) body wall

Bancroftian filariasis constitutes the principal mosquito-borne nematode infection of humans and the surface of adult of Wuchereria bancrofti seems to be especially important in the intricate interplay between host and parasite. The study of the parasite's surface structure might help to understand the localization and function of various organelles. W. bancrofti adult worms were recovered from untreated patients during hydrocele repair surgery and studied by transmission electron microscopy. The body wall of adult parasite is composed of cuticle, hypodermis and muscular layer. Cuticle is the external layer and shows transverse cuticular striation. It is composed by an epicuticle, cortical layers, median layer, fibrous layers and basal layer. The epicuticle is the most external cuticular layer and appears as a single laminar electron-dense layer. The cortical external region is more electron-dense and granular in appearance than the inner cortical layer. Electron-dense structures, called bosses are randomly distributed filling the cuticular striation. The median layer is formed by an electron-dense and continuous thick line. The fibrous layer is subdivided in inner and external layers connected by projections. The basal layer includes a large quantity of membranous projections directed toward the hypodermis. The hypodermis is a syncytium where some cellular organelles are observed. The somatic musculature is meromyarian. The muscle fibers consist of contractile and non-contractile regions and the contractile region is composed of myofilaments separated by dense body. This is the first study of W. bancrofti adult worms obtained from untreated patients and studied by transmission electron microscopy.     

Morphology of Bufo ictericus integument (Amphibia, Bufonidae)

Bufo ictericus integument was investigated by stereoscopic, low vacuum scanning electron microscopy, transmission electron microscopy and light microscopy. The studies revealed, that the dorsal integument surface is rougher than ventral. Three types of projections are visualized: larger rounded verrucae, smaller conical cornified tubercles, and conical short spines. Prominent verrucae are observed on the dorsal surface, being flatter on the ventral surface. The tubercles are visualized only on the dorsal surface. The verrucae are separated by grooves that may contribute spreading and retention of the glandular secretion upon the integument. The pattern of the epidermal grooves is also important for water distribution, protecting the animal against desiccation. The epidermis is composed of a stratified epithelium with intraepithelial blood vessels, where keratinocytes predominate, but flask cells, and Merkel cells also occur. In the spongious dermis, cutaneous glands are visualized. The compact dermis is a series of alternating layers of bundles of collagenous fibers, and between spongious and compact dermis there are basophilic areas that correspond to Eberth-Katschenko layer. The dorsal and the ventral surfaces of B. ictericus are morphologically distinct. The integument structure is related to the physiology of each surface and represents an adaptation to habitat, reflecting a lifestyle of the animal.     

A numerical study on the formation of diffusion flame islands in a turbulent hydrogen jet lifted flame

This paper presents a numerical study on the formation of diffusion flame islands in a hydrogen jet lifted flame. A real size hydrogen jet lifted flame is numerically simulated by the DNS approach over a period of about 0.5 ms. The diameter of hydrogen injector is 2 mm, and the injection velocity is 680 m/s. The lifted flame is composed of a stable leading edge flame, a vigorously turbulent inner rich premixed flame, and a number of outer diffusion flame islands. The relatively long-term observation makes it possible to understand in detail the time-dependent flame behavior in rather large time scales, which are as large as the time scale of the leading edge flame unsteadiness. From the observation, the following three findings are obtained concerning the formation of diffusion flame islands. (1) A thin oxygen diffusion layer is developed along the outer boundary of the lifted flame, where the diffusion flame islands burn in a rather flat shape. (2) When a diffusion flame island comes into contact with the fluctuating inner rich premixed flame, combustion is intensified due to an increase in the hydrogen supply by molecular diffusion. This process also works for the production of the diffusion flame islands in the oxygen diffusion layer. (3) When a large unburned gas volume penetrates into the leading edge flame, the structure of the leading edge flame changes. In this transformation process, a diffusion flame island comes near the leading edge flame. The local deficiency of oxygen plays an important role in this production process.     

Structure of alumina nanowires synthesized by chemical etching of anodic alumina membrane

We report the structure of alumina nanowires (ANWs) synthesized by the chemical etching of an anodic alumina membrane (AAM). The AAM was prepared by the two-step anodization method followed by the lift-off process. The field emission transmission electron microscopy analyses showed that the AAM consists of a gel-like structure, an outer layer, and an inner layer, which are distinguished by their anion impurity concentration. The fabricated ANWs appeared to have a two-oxide-layer structure, similar to the core-shell structure in a coaxial cable. The inner oxide layer may be composed of relatively pure alumina and the outer oxide layer of the byproducts of the reaction between alumina and the anodization or etching solution. The fabricated ANWs have a flexible nature, with some of them being sufficiently malleable to form L-shaped ANWs. One possible formation process of the two-oxide-layer structured ANW is discussed.     

金属Ni原子对石墨烯生长结构的影响

基于Material Studio软件平台,利用分子动力学方法,对Ni原子与石墨烯层状结构相互作用和晶体结构变化过程进行模拟分析,得到如下结论：低浓度Ni原子会吸附在石墨烯表面层沿边缘生长,活性从中心向边缘逐渐降低,高浓度的Ni原子会溶解到内层石墨烯中.当石墨烯层数增加,附着在表层石墨烯的Ni原子生长排列范围扩大,且在石墨烯表面形成的点阵排列被破坏,附着在内层石墨烯的Ni原子比表层石墨烯Ni原子排列更散乱,同时石墨烯生长结构逐渐出现弯曲;随着层数增多和Ni原子浓度增加,石墨烯的拉伸强度也随之增加,石墨烯生长缺陷的偏转角度也随之增大.通过计算以上结构的径向分布函数(RDF),验证了石墨烯长程有序到短程有序的结构变化过程.     

Branching of equilibria of a system of micro/nanostrings at direct currents

Branching of equilibria of a system of three parallel conducting nano/microlayers, which is used to detect changes in the external and internal mechanical and electric characteristics (for example, conductivity, tension force, and gap between layers), has been investigated. A change in the physical parameters may cause asymmetric bending of the outer layers and deformation of the formerly neutral middle layer. By changing the current in one of the outer layers slowly, their initial symmetry (neutrality of the inner layer) can be restored and the change that occurred in the parameters can be determined.     

The effect of the ferromagnetic metal layer on tunnelling conductance and magnetoresistance in double magnetic planar junctions

Based on the free-electron approximation,we investigate the effect of the ferromagnetic metal layer on the tunnelling magnetoresistance(TMR) and tunnelling conductance(TC)in the double magnetic tunnel junctions(DMTJs) of the structure NM/FM/I(S)/NM/I(S)/FM/NM,where FM,NM and I(S) represent the ferromagnetic metal,nonmagetic metal and insulator(Semiconductor),respectively,The FM,I(S)and inner NM layers are of finite thickness,while the thickness of the outer NM layer is infinite.The calculated results show that,due to the spin-dependent interfacial potential barriers caused by electronic band mismatch between the various magnetic and nonmagnetic layers,the dependences of the TMR and TC on the thicknesses of the FM layers exhibit oscillations,and a much higher TMR can be obtained for suitable thicknesses of FM layers.     

水雾包裹沙尘颗粒核壳结构的散射特性研究

基于离散偶极子近似法(DDA),对水雾包裹沙尘颗粒的核壳结构光学特性进行研究,计算了长短轴比例为2∶1的椭球形粒子的核壳结构内、外层厚度及散射角度变化对光散射特性的影响。结果表明,内核大小不变,外层厚度由1.2 μm增大到4.8 μm,核壳双层颗粒散射系数和消光系数由3.4和3.43降低到2.543和2.545,且散射相对强度也明显增大。外层厚度不变,内核厚度由0.6 μm增加到2.4 μm,散射系数和消光系数由3.105和3.111变化为2.76和2.9;可见外层厚度对核壳双层颗粒散射特性的影响更大,这是由于散射光主要与外层物质相互作用引起的。散射相对强度随波长的增加而降低,随核壳结构尺度的增加呈现递增的规律。该结果对大气中气溶胶和水雾共同作用时的散射特性,激光在其中的传输特性等研究有参考价值。     

STM and XPS investigations of bismuth islands on HOPG

The growth of bismuth thin films on highly oriented pyrolitic graphite (HOPG) was studied using ultra high vacuum (UHV) scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The locations of the main XPS peaks, and also the plasmon energy, are in good agreement with results recorded on bulk bismuth. The shape of the Bi 4f doublet, as well as the well developed Fermi edge, indicates the metallic character of the deposited film. One of the observed shoulders is identified with a quantum-well subband characteristic of thin bismuth films. There is no evidence for the existence of Bi–C bonds, consistent with weak bonding between the Bi islands and the HOPG. The height of the islands and their crystallographic orientation were investigated as a function of surface coverage. The Bi islands grow with the (110) plane parallel to the substrate. The observed heights (3, 5, 7, 9 ML) indicate that the preferred crystal structure involves paired layers on an intermediate mono-atomic Bi layer. There is evidence both for and against the Black Phosphorus like allotrope, and the nature of both the layer pairing and the intermediate layer are yet to be resolved. The islands exhibit stripes oriented along the $<1\overline{1}0>$ axis of the Bi crystal, which is a fast growth direction due to the existence of strongly bonded zig-zag chains of atoms. The surface unit cell and the parameters of the rhombohedral bulk unit cell are estimated based on atomic resolution images. In the case of 2 ML stripes on top of a 5 ML base, the expansion of the outer atomic rows was estimated at 27%. Asymmetries in the growth of the islands are observed. Based on low coverage depositions at reduced substrate temperatures, it is proposed that there is a second fast growth direction corresponding to preferential attachment of atoms to one of the faces of the asymmetric, rhombic cross-section of the (110) crystal.     

双层塑料靶丸的X射线相衬成像

 为对微聚焦X射线相衬成像技术应用于双层以及多层塑料靶丸成像和特征分析进行可行性研究,基于类同轴X射线成像技术,综合考虑成像放大倍数、分辨率和衬度等因素,选择合适的实验参数,成功获得了较为清晰的双层塑料靶丸X射线相衬成像照片;采用数字图像处理技术的图像分割手段,如拉普拉斯高斯边缘检测法等对所成像中靶丸边界特征进行分析处理,获得了双层靶丸内层厚度为（10.5±0.6） μm,外层厚度为（9.2±0.7） μm,靶丸外径为（273.3±1.0） μm等参数。     

Electronic stability of magnetic Fe/Co superlattices with monatomic layer alternation

We report a surprising observation that the growth of the [Fe(1 ML)/Co(1 ML)](n) superlattice of L1(0) structure on Cu(100) is stable only up to six atomic layers (n=3), which cannot be rationalized by stress arguments. Instead, first-principles calculations reveal a transition from the L1(0) to the B2 structure due to the effect of dimensionality on the stability of the electronic structure of the superlattice. Whereas the majority-spin electrons are energetically insensitive to the layer thickness, the minority-spin electrons induce the transition at n=3.