Polymeric ionic liquid as a background electrolyte modifier enhancing the separation of inorganic anions by capillary electrophoresis

A novel and easy method for the separation of inorganic anions by capillary electrophoresis using a polymeric ionic liquid (PIL), poly(1-vinyl-3-butylimidazolium bromide) as a background electrolyte modifier has been developed. The PIL has been proved to generate a reversed electroosmotic flow which reduces the analysis time and improves the separation significantly. Effects of the PIL concentration and buffer composition (pH and concentration) were evaluated on basis of the resolution and efficiency of the sample. Under optimum conditions, good separation of six model inorganic anions was achieved with high efficiency and excellent reproducibility within 3 min. The results obtained indicate that the combination of reversed EOF and the association between the analytes and the PIL on the capillary wall or BGE play a prominent role in the separation of anions. Therefore, the PIL presents a useful alternative for the BGE modifier in the study of inorganic anions by CE.     

A fresh look into background electrolyte selection for capillary electrophoresis‐laser induced fluorescence of peptides and proteins

This study reports a reinvestigation of background electrolyte selection strategy for performance improvement in CE‐LIF of peptides and proteins. This strategy is based on the employment of high concentrations of organic species in BGE possessing high buffer capacity and low specific conductivity in order to ensure excellent stacking preconcentration and separation resolution of fluorescently tagged peptides and proteins. Unlike universal UV detection, the use of such BGEs at high concentrations does not lead to degradation of LIF detection signals at the working excitation and emission wavelengths. At the same buffer ionic strength, pH and electric field, an “inorganic‐species‐free” BGE (or ISF BGE) for CE‐LIF of fluorescently labeled beta amyloid peptide Aβ 1–42 (a model analyte) offered a signal intensity and peak efficiency at least three‐times higher than those obtained with a conventional BGE normally used for CE‐LIF, while producing an electric current twice lower. Good peak performance (in terms of height and shape) was maintained when using ISF BGEs even with samples prepared in high‐conductivity phosphate buffer saline matrix. The advantageous features of such BGEs used at high concentrations over conventional ones in terms of high separation resolution, improved signal intensities, tuning of EOF magnitudes and minimization of protein adsorption on an uncoated fused silica capillary are demonstrated using Alexa‐488‐labelled trypsin inhibitor. Such BGE selection approach was applied for investigation of separation performance for CE‐LIF of ovalbumin labelled with different fluorophores.     

Determination of inorganic anions in human saliva by zwitterionic micellar capillary electrophoresis

Capillary electrophoresis (CE) using sulfobetaine-type zwitterionic micelles as the background electrolyte (BGE) has been used to determine inorganic anions in human saliva. The zwitterionic micelles resulted in unique migration behavior for the separation of inorganic anions. They also prevented adsorption of proteins on the inner wall of the capillary. These properties of the zwitterionic micelles enabled the direct determination of inorganic anions in human saliva. Three species of inorganic anions, NO2-, NO3-, and SCN-, were found in real samples and the analysis was achieved within 3 min. Direct UV-absorption was used as the detection method and the detection limits for these anions were 2.0, 1.0, and 5.0 micromol L(-1), respectively (0.09, 0.06, and 0.30 microg mL(-1)).     

Capillary electrophoretic analysis of neutral carbohydrates using ionic liquids as background electrolytes

In this study, ionic liquids (ILs) as BGE additives were applied for the analysis of neutral carbohydrates in CE. The ILs served primarily as chromophores for indirect UV detection. The influence of imidazolium-based ionic liquids on the separation, detection limits and mobility of underivatized neutral carbohydrates was investigated. BGEs consisting of 10-50 mM of ILs at pH 12.4 without other additives provided fast separation of neutral sugars. This method was used to determine sucrose, glucose and fructose in certain vegetable juices.     

Enhanced selectivity and sensitivity for inorganic anions using an ion-pairing reagent and sample stacking in capillary zone electrophoresis with direct UV detection

In this paper, the use of an ion-pairing reagent to improve the separation selectivity of inorganic anions in CZE was demonstrated by the addition of tetramethylammonium hydroxide (TMAOH) to the electrolyte. The separation of inorganic anions (Cl(-), I(-), Br(-), NO(2)(-), NO(3)(-) and SCN(-)) was performed using co-electroosmotic flow (EOF) with direct UV detection at 185 nm. The parameters affecting the mobility of the tested anions and the EOF such as the electrolyte pH and concentration of TMAOH in the electrolyte were examined to optimise the separation conditions. In addition, sample-stacking techniques were investigated to improve detection sensitivity. Detection sensitivities were improved 5-13-fold using electrokinetic sample stacking. The detection limits ranged from 1-3 micro mol L(-1). Finally, the proposed method was used for the separation of anions in groundwaters.     

Evaluation of electroosmotic markers in aqueous and nonaqueous capillary electrophoresis

The most common method to determine the EOF in CE is to measure the migration time for a neutral marker. In this study, 12 compounds (three novel and some previously used) were investigated as EOF markers in aqueous and nonaqueous BGEs. In the aqueous buffer systems (ammonium acetate, sodium phosphate, and sodium borate) the evaluation included a wide pH range (2–12). Two BGEs contained chiral selectors (sulphated‐β‐CD, (?)‐diketogulonic acid) and one that contained a micellar agent (SDS) were included in the study. The majority of the evaluated compounds were found to migrate with the EOF in the water‐based BGEs and are thus useful as EOF markers. However, in the SDS‐based BGE only four of the compounds (acetone, acrylamide, DMSO, and ethanol) were found to be applicable. In the nonaqueous BGEs 11 markers (acetone, acetophenone, acrylamide, anthracene, benzene, 4‐(4‐methoxybenzylamino)‐7‐nitro‐2,1,3‐benzoxadiazole, benzyl alcohol, 2,5‐diphenyloxazole, ethanol, flavone, and mesityl oxide) seemed to be functional as EOF markers. Even though several of the evaluated compounds can be used as EOF markers in the investigated BGEs, the authors would recommend the use of acrylamide as a general marker for UV detection. Furthermore, the four fluorescent markers (of which three were novel) gave RSD values equal to the other markers and can be used for the determination of the EOF in CE or microchip CE with fluorescence detection.     

Potential of CE for the determination of inorganic and acidic anions in cyanoacrylate adhesives

In this work, a CZE method with indirect UV detection was developed for the simultaneous determination of the inorganic and acidic anions, chloride, sulfate, nitrate, fluoride, formate, phosphate, diethylphosphate, methyl sulfonate, cyanoacetate, and methacrylate present in cyanoacrylate adhesives. Chromate was employed as the probe ion, and the EOF was reversed by incorporating CTAB into BGE. Detection limits of 0.7-4.6 microg/mL were obtained for all the anions studied. The CE method developed is a significant improvement on traditionally used chromatographic methods such as ion chromatography, as it resulted in shorter analysis times with enhanced separation efficiencies. This method was successfully employed for the analysis of inorganic and acidic anions in cyanoacrylate adhesive samples.     

Multiple effect of surfactants used as additives in background electrolytes in capillary zone electrophoresis: cetyltrimethylammonium bromide as example of model surfactant

Surfactants are frequently used in the preparation of background electrolytes (BGEs) in capillary zone elcetrophoresis (CZE) in order to affect and to optimize both the electroosmotic flow (EOF) and the separation process. Their effects are, however, always multiple, the resulting situation may be very complex and the separation process may even be destroyed. We use the surfactant cetyltrimethylammonium bromide (CTAB) as a model example and bring experimental results and related discussion which elucidate the multiple effect of surfactants in an integrated way. It is shown that even at concentration levels lower than 10(-4) M CTAB strongly reduces the cathodic EOF in bare fused-silica capillaries and converts it into anodic EOF. The magnitude and polarity of the EOF depends not only on the concentration of CTAB but also on the composition of BGEs used. The interactions of CTA cations with the bare capillary wall reduce sorption of cationic analytes and enables their analysis. CTA cations at levels below their critical micelles concentration (CMC) already interact with anionic analytes and reduce their mobilities. This association is strong with highly charged anions and by this, the reversal of the EOF, applying BGEs with highly charged anions is less effective. These interactions are competitive and also depend on the composition of the BGE used. At levels above its CMC, CTAB forms micelles and enables the application of the micellar electrokinetic capillary chromatography (MEKC) mode and the analysis of, e.g., neutral components. Simultaneously, it is shown that the presence of CTAB may increase the number of potentially formed system zones.     

Nonionic surfactant enhanced semipermanent coatings for capillary electrophoresis of inorganic anions without use of organic additives

Separation of inorganic anions by capillary electrophoresis (CE) is usually conducted in co-electroosmotic mode due to the large electrophoretic mobilities of inorganic anions. Semipermanent surfactant coatings have been shown to be effective for CE of inorganic anions due to their strong capability of electroosmotic flow (EOF) manipulation. However, semipermanent coatings often suffer from their unsatisfactory stability. In addition, organic solvent additives are usually required to adjust the selectivity, which also aggravate the degradation of coating. In this work, a novel semipermanent coating consisting of cationic Gemini surfactant 18-10-18 and nonionic surfactant Tween 20 was developed to separate inorganic anions in CE. This coating is easy to prepare and more stable than pure Gemini coating. The introduction of nonionic surfactant in the coating not only suppresses the reversed EOF but can also adjust the selectivity of separation. Good separations of six model anions were achieved, the separation efficiency was as high as 65040-169700 plates/m and the RSDs of the migration times were less than 0.5 and 2.5% for run-to-run and day-to-day assays, respectively. Calibration curves were linear in the range of 0.05-5.0 mM; the detection limits ranged from 20 to 50 μM. More importantly, no organic solvents are required in the background buffer to achieve the satisfactory separations. This guarantees the coating stability and makes the method greener than most of other methods for CE of inorganic anions.     

Simultaneous separation of 17 anions by capillary electrophoresis with the addition of an organic solvent

Seventeen inorganic and organic anions, that normally are insufficiently separated via ion chromatography, were completely separated by the addition of an organic solvent to a solution of BGE combined with an adjustment of the apparent pH via CE in combination with indirect UV absorbance detection. Methanol, ethanol, and acetonitrile were examined for their utility in manipulating the selective separation of anions. Methanol and acetonitrile were better modifiers than ethanol at enhancing the resolution of anions comigrating in an aqueous solution of BGE. Methanol was selected as the modifier that provided the largest separation window that could achieve a complete separation of the target analytes. Via the use of methanol, manipulation of the selectivity between inorganic anions and that between inorganic and organic anions was enhanced, but the separation between organic anions remained difficult when only methanol was used. By varying the apparent pH of the BGE in the presence of 10% v/v methanol, however, the separation selectivity between organic anions was substantially improved. Eventually, 7 inorganic and 10 organic anions were simultaneously separated using BGE at a pH of 6.3 in the presence of 10% v/v methanol.     

Sensitivity enhancement in capillary electrophoresis-mass spectrometry of anionic metabolites using a triethylamine-containing background electrolyte and sheath liquid

Analyte responses in CE‐ESI‐MS using negative ionization are frequently relatively low, thereby limiting sensitivity in metabolomics applications. In order to enhance the ionization efficiency of anionic metabolites, BGEs and sheath liquids (SLs) of various compositions were evaluated. Pressure‐induced infusion and CE‐MS experiments showed that addition of triethylamine (TEA) to the BGE and SL enhanced analyte intensities. A BGE consisting of 25 mM TEA (pH 11.7) and an SL of water–methanol (1:1, v/v) containing 5 mM TEA was selected, providing separation and detection of ten representative test metabolites with good reproducibility (migration time RSDs<1%) and linearity (R²>0.99). This BGE yielded lower limits of detection (0.7–9.1 μM) for most test compounds when compared with common CE‐MS methods using a BGE and SL containing ammonium acetate (NH₄Ac) (25 and 5 mM, respectively). CE‐MS of human urine revealed an average amount of 231 molecular features in negative ionization mode when TEA was used in the BGE and SL, whereas 115 and 102 molecular features were found with an NH₄Ac‐containing BGE and SL, employing a bare fused‐silica (BFS) and Polybrene‐dextran sulfate‐Polybrene (PB‐DS‐PB)‐coated capillary, respectively. With the CE‐MS method using TEA, about 170 molecular features were observed that were not detected with the NH₄Ac‐based CE‐MS methods. For more than 82% of the molecular features that were detected with the TEA as well as the NH₄Ac‐containg BGEs (i.e. common features), the peak intensities were higher using TEA with gain factors up to 7. Overall, the results demonstrate that BGEs and SLs containing TEA are quite favorable for the analysis of anionic metabolites in CE‐MS.     

Efficient and reproducible analysis of peptides by capillary electrophoresis using noncovalently bilayer-coated capillaries

The usefulness of a noncovalent capillary coating consisting of two layers of oppositely charged polymers for the separation of peptides with capillary electrophoresis (CE) was studied. Capillaries were coated simply by subsequently flushing with solutions of 1% m/v Polybrene and 1% v/v poly(vinylsulfonate) (PVS) forming a bilayer, which showed to produce a strong and highly reproducible electroosmotic flow (EOF) at low pH. Using this coating in combination with a background electrolyte (BGE) containing sodium phosphate (pH 2.5) and 0.01% v/v PVS, initially broadened and overlapping peaks were obtained for some test peptides. By omitting the PVS from the BGE, the peak width and shape of the peptides improved resulting in baseline separation. A systematic study of the influence of the BGE composition showed that considerable further enhancement of the separation efficiency was achieved by increasing the ionic strength of the BGE. Using a BGE of 200 mM tris(hydroxymethyl)aminomethane (Tris)-phosphate (pH 2.5) plate numbers for the peptides were in the 300 000-600 000 range and the relative standard deviation of the peptide migration times was less then 0.3% (n = 5). The use of Tris-phosphate instead of sodium phosphate allowed the current to stay within acceptable limits when 30 kV was used as separation voltage. Overall, the bilayer coating showed a remarkable EOF repeatability, as well as long-term stability. Compared to bare fused-silica capillaries the intraday and interday repeatability of migration times was very favorable and coated capillaries could be used for over a month performing analyses with low and high ionic strength BGEs without any performance deterioration. The usefulness of the bilayer-coated capillaries for the analysis of positively charged peptides was demonstrated by the fast and efficient separation of various closely related enkephalins and the baseline separation of an isomeric peptide/peptoid couple exhibiting efficiencies of over 550 000 plates.     

Simultaneous Determination of Inorganic Anions and Organic Acids in Environmental Samples by Capillary Zone Electrophoresis with Indirect UV Detection

Capillary zone electrophoresis (CZE) with indirect UV detection was developed for the simultaneous determination of inorganic anions and organic acids in environmental samples. Various aromatic acids (benzoic, phthalic, trimellitic, and pyromellitic acids) were evaluated as background electrolytes (BGEs) to give high resolution and detection sensitivity. Co-electroosmotic conditions such as the concentration of BGE, electrolyte pH, and EOF modifier were systematically investigated. Three inorganic anions and ten organic acids were determined simultaneously in 10 min using an electrolyte containing 10 mM phthalic acid, 0.5 mM myristyltrimethylammonium bromide (MTAB), and 5% methanol (MeOH) (v/v) at pH 5.60. Linear plots for the test solutes were obtained in the concentration range 0.01–1.0 mM with detection limits in the range 5–30 μM. The proposed method was successfully demonstrated for the determination of inorganic anions and organic acids in natural water, soil, and plant extracts after direct sample injection.     

Determination of 1-methylhistidine and 3-methylhistidine by capillary and chip electrophoresis with contactless conductivity detection

CE with capacitively coupled contactless detection (C4D) was used to determine 3-methylhistidine (3-MH) and 1-methylhistidine (1-MH). The C4D response to 3-MH was studied in a BGE consisting of 500 mM acetic acid and ammonia at varying concentration and the results were compared with the theory. Complete separation of a model mixture of 3-MH, 1-MH, and histidine (His) was attained in two optimized BGEs, one containing 500 mM HAc, 20 mM NH4OH, and 0.1 % m/v hydroxyethylcellulose (HEC), pH 3.4 (I) and the other consisting of 100 mM morpholinoethanesulfonic acid (MES), 25 mM LiOH, and 0.1 % m/v HEC, pH 5.5 (II). These optimized BGEs were tested in CE/C4D analyses of urine. Promising results were obtained for separation and determination of 3-MH, 1-MH, and His on a silicon microchip, using aluminum strips as the C4D electrodes; the three analytes were baseline-separated within less than 30 s with a separation channel effective length of 38 mm. The LOD were satisfactory and amounted to 26.4 microM for 3-MH and 18.3 microM for 1-MH.     

Modification of the electroosmotic flow and separation selectivity of anions in electrochromatography with pseudo-stationary phases of C14-alkyldimethylammoniopropane sulfonate zwitterionic surfactants by addition of salts to the background electrolyte

The effects of salts (NaCl, NaClO4, MgCl2, CeCl3) added to background electrolyte (BGE) solutions (10 mmol L(-1) sodium phosphate, pH 7.2) on electroosmotic flow (EOF) and the separation selectivity of anions (chloride, bromide, iodide, nitrite, nitrate, chlorate, thiocyanate, iodate, chromate, and molybdate ion) by capillary electrochromatography using the zwitterionic surfactant 3-(N,N-dimethylmyristylammonio)propane sulfonate (C14N3S) as a pseudo-stationary phase were investigated. There are two mechanisms affecting the separations: 1. the cations and anions of the added salts interact with the zwitterionic surfactant to varying degrees, thus changing the overall retention of the analytes; and 2. they change the EOF and the resulting apparent mobilities. It was shown that a BGE containing perchlorate and a low concentration of zwitterionic surfactant (2 mmol L(-1)) gave a stable and reproducible EOF and the concentration of perchlorate could be used to manipulate the separation selectivity for polarizable anions, such as iodide and thiocyanate. These effects are discussed in terms of measured association constants describing the interaction of anions and cations with the zwitterion.     

Separation and investigation of structure-mobility relationships of insect oostatic peptides by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) has been applied to qualitative analysis, separation, and physicochemical characterization of synthetic insect oostatic peptides (IOPs) and their derivatives and fragments. Series of homologous IOPs were separated in three acidic background electrolytes (BGEs; pH 2.25, 2.30, 2.40) and an alkaline BGE (pH 8.1). Best separation was achieved in acid BGE composed of 100 mM H3PO4, 50 mM Tris, pH 2.25. The effective electrophoretic mobilities, mu(ep), of all IOPs in four BGEs were determined and several semiempirical models correlating effective mobility with charge-to-size ratio (mu(ep) versus q/Mr k) were tested to describe the migration behavior of IOP in CZE. None of models was found to be unambiguously applicable for the whole set of 20 IOPs differing in size (dipeptide - decapeptide) and charge (-2 to +0.77 elementary charges). However, a high coefficient of correlation, 0.9993, was found for the subset of homologous series of IOPs with decreasing number of proline residues at C-terminus, H-Tyr-Asp-Pro-Ala-Prox-OH, x = 6 - 0, for the dependence of mu(ep) on q/Mr k with k = 0.5 for IOPs as anions in alkaline BGE and with k = 2/3 for IOPs as cations in optimized acidic Tris-phosphate BGE. From these dependences the probable structure of IOPs in solution could be predicted.     

Analysis of aromatic acids by nonaqueous capillary electrophoresis with ionic‐liquid electrolytes

The separation of six kinds of aromatic acids by CZE with 1‐ethyl‐3‐methylimidazolium chloride (EMIMCl) and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO₄)_, two kinds of ionic liquids (ILs) as background electrolytes, and acetonitrile as solvent were investigated. The six kinds of aromatic acids can be separated under positive voltage with low IL concentration with either of the two ILs and separation with EMIMHSO₄ is better in consideration of peak shapes and separation efficiency. But the migration order is different when the IL is different. Under negative voltage with high IL concentration, the six analytes can be separated with EMIMCl as background electrolytes and the migration order of the analytes is opposite to those with low concentration of EMIMCl as background electrolyte. The separations are based on the combination effects of heteroconjugation between the anions and cations in the ILs and the analytes, of which the heteroconjugation between the anions in the ILs and the analytes plays a dominant role. The heteroconjugation between the anions of the ILs and analytes is proton sensitive and only a very small amount of proticsolvents added into the electrolyte solution can harm the separation. When EMIMCl concentration is high, the heteroconjugation between the IL anions and the proton in the analytes make the effective mobility of the analytes much higher than the EOF and their migration direction reversed. Finally, the six aromatic acids in water samples were analyzed by nonaqueous CE with low concentration of EMIMHSO₄ as background electrolytes with satisfactory results.     

Analysis of organic acids and inorganic anions in beverage drinks by capillary electrophoresis

To meet the need for a new and validated analytical method for simultaneous determination of inorganic and organic acid anions in beverage drinks, a capillary zone electrophoresis (CZE) procedure had been developed based on a new background electrolyte (BGE) system containing 3 mmol/L 1,3,5-benzenetricarboxylic acid (BTA), 15 mmol/L tris(hydroxymethyl)aminomethane and 1.5 mmol/L tetraethylenepentamine (TEPA) at pH 8.4. Baseline separation of anions commonly found in beverage drinks could be achieved in less than 14 min with indirect UV detection at 240 nm. Comigration problems for hydroxycarboxylic acids could be solved using TEPA as BGE additive. The results indicate excellent repeatability for migration time (RSD, 0.27-0.67%, n = 5) and good precision for both peak height (RSD, 3.2-4.2%, n = 5) and peak area (RSD, 3.1-4.5%, n = 5). Under the optimized conditions and using corrected peak area for quantitation, an excellent linear dynamic range (with correlation coefficient > 0.997 in a concentration range from 0.005 to 2.0 mmol/L) and low detection limit (1-4 micro mol/L) were obtained for all the anions investigated. The applicability and reliability of the CE procedure developed were established by parallel method determination using established ion chromatography procedure for the analysis of inorganic and organic acid anions in orange juice and wine samples. Our CZE procedure provided a sensitive and economic technique for simultaneous determination of inorganic and organic acid anions in orange juice, red and white wine samples.     

Effect of alkali metal hydroxides on the enantioseparation of amines using di-O-isopropylidene-keto-L-gulonic acid as the selector in NACE

The present work demonstrates the importance of the ionic composition in the BGE for enantioseparation. (-)-2,3:4,6-di-O-Isopropylidene-2-keto-L-gulonic acid ((-)-DIKGA) has been used as the chiral selector in methanolic and ethanolic BGEs. The influence of added alkali metal hydroxides on the EOF and the chiral separation of amines (atenolol, isoprenaline, pindolol and propranolol) have been studied. The ion-pair formation constants in ethanol were determined by precision conductometry for the enantiomers of pindolol with (-)-DIKGA, for Li(+), Na(+) and Cs(+) with (-)-DIKGA, and also for the corresponding alkali metal hydroxides. The effective mobilities and the enantiomeric mobility differences were affected by the type of alkali metal hydroxide (LiOH, NaOH, KOH, RbOH or CsOH) added to the BGE. The effective mobility and mobility difference were increased with decrease in solvated radius of the alkali metal cation. These differences could partly be correlated to the ion-pair formation constants of the alkali metal cations with the chiral selector, affecting the equilibrium concentration of the free selector. The electroosmosis was also affected by the alkali metal hydroxide added to the BGE. The cathodic electroosmosis decreased with decreasing solvated radius of the alkali metal cation added to the BGE. Interestingly, the cathodic EOF was even reversed, i.e. became anodic in the ethanolic BGEs containing KOH, RbOH or CsOH and the methanolic ones with RbOH and CsOH.     

Use of inorganic, complex-forming ions for selectivity enhancement in capillary electrophoretic separation of organic compounds

Capillary electrophoresis (CE) is a powerful separation method based on the migration of charged species under the influence of electric field. The main merits of CE are high separation efficiency, short analysis time and small consumption of solvents and samples. However, the main drawbacks of CE are generally lower sensitivity compared to classical column-chromatographic methods.Selectivity and/or sensitivity of CE separation can be improved by forming complexes between analytes and a complex-forming reagent present as an additive in the background electrolyte (BGE). We focus this review primarily on the application of inorganic complex-forming reagents added to the BGE to separate organic ligands. We briefly mention common CE separations of inorganic analytes (mainly metal ions) using BGEs with organic ligands (e.g., hydroxycarboxylic or aminopolycarboxylic acids) as selectors.The review involves brief theoretical consideration of the significance of the effect of complex formation on separation selectivity and/or sensitivity in CE, but the major topic is critical evaluation of different inorganic complex-forming reagents used recently in the CE analysis of organic compounds, including:

(i)

borate, tungstate and molybdate in separating organic compounds possessing vicinal -OH groups;

(ii)

ligand-exchange CE and capillary electrochromatography in chiral analysis; and,

(iii)

the role of metal ions as central ions employed for selectivity enhancement of CE separation of various classes of organic compounds, including biopolymers.