Two‐dimensional Fourier transform infrared correlation spectroscopy and evolving factor analysis in the study of cationic curing of DGEBA and γ‐valerolactone mixtures

Generalized two‐dimensional (2D) correlation spectroscopy and evolving factor analysis (EFA) have been applied to the study of cationic curing reaction of mixtures of diglycidyl ether of bisphenol A (DGEBA) and γ‐valerolactone (γ‐VL). The reaction has been monitored by Fourier transform infrared spectroscopy. The reaction periods in which a chemical change takes place are identified using EFA and then the sequence of changes are established by means of the interpretation of the synchronous and asynchronous spectra obtained with 2D correlation spectroscopy. By combining this information, in the curing process, four reactions have been detected: (1) DGEBA and γ‐VL reaction to obtain a spiroorthoester intermediate, (2) homopolymerization of DGEBA, (3) copolymerization of DGEBA with the spiroorthoester intermediate, and (4) homopolymerization of the spiroorthoester. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3886–3899, 2008     

Curing reaction of glycidylthioether resins: Kinetic model study by near infrared spectroscopy and multivariate curve resolution

The reactivity of sulfur‐based epoxy monomers was studied by monitoring of a model system involving phenylglycidylthioether and aniline. The reaction was carried out under isothermal conditions and monitored in situ by near infrared spectroscopy. Using multivariate curve resolution‐alternating least squares made it possible to obtain the concentration and spectral profiles of each species throughout the reaction. To obtain the kinetic rate constants, the values of the recovered concentration profiles were fitted to a kinetic model proposed for the reaction. Reactivity was evaluated by comparing the concentration profiles and kinetic rate constants obtained with the same parameters obtained for phenylglycidylether/aniline as a reference system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4846–4856, 2006     

Scale-up of batch kinetic models

The scale-up of batch kinetic models was studied by examining the kinetic fitting results of batch esterification reactions completed in 75 mL and 5 L reactors. Different temperatures, amounts of catalysts, and amounts of initial starting reagents were used to completely characterize the reaction. A custom written Matlab toolbox called GUIPRO was used to fit first-principles kinetic models directly to in-line NIR and Raman spectroscopic data. Second-order kinetic models provided calibration-free estimates of kinetic and thermodynamic reaction parameters, time dependent concentration profiles, and pure component spectra of reagents and product. The estimated kinetic and thermodynamic parameters showed good agreement between small-scale and large-scale reactions. The accuracy of pure component spectra estimates was validated by comparison to collected NIR and Raman pure component spectra. The model estimated product concentrations were also validated by comparison to concentrations measured by off-line GC analysis. Based on the good agreement between kinetic and thermodynamic parameters and comparison between actual and estimated concentration and spectral profiles, it was concluded that the scale-up of batch kinetic models was successful.     

Reaction of arylhydrazines with an α-alkynyl-carbonylic compound: an unexpected hydration reaction

The acid catalyzed reactions of three arylhydrazines with 4-phenyl-3-butynone in order to obtain the corresponding arylhydrazone were realized. The arylhydrazone reaction and an unexpected alkyne hydration reaction product were obtained when diphenylhydrazine was used. This product was identified by spectroscopic methods and X-ray diffractogram. A reaction mechanism is proposed for its formation.     

In-situ monitoring by fibre-optic NIR spectroscopy and rheometry of maleic anhydride grafting to polypropylene in a laboratory scale reactive extruder

The graft copolymerisation of maleic anhydride (MAH) onto polypropylene (PP) has been studied in situ by interfacing a laboratory scale mini-extruder/processor with a near-infrared (NIR) spectrometer via a fibre optic link. Apparent viscosity was measured simultaneously with the NIR spectra. The graft reaction was carried out at several temperatures with and without the initiator, dicumyl peroxide (DCP). Analysis of the NIR spectra showed the reaction to be first order with respect to MAH, and that the graft reaction rate was not affected by the presence of DCP. However, DCP caused a large increase in chain scission reactions leading to a dramatic drop in apparent viscosity. In the absence of DCP, scission reactions occurred at a slower rate and the apparent viscosity remained steady, after an initial drop, for about 15 min during the early part of the reaction. We suggest that a possible explanation for this might be a “repair mechanism” involving the reaction of two PP macro-radicals with a single MAH moiety, thus maintaining the molecular weight. Once the concentration of MAH drops, this reaction becomes less significant and scission reactions dominate.     

Synthesis of N-acyl-N,alpha,alpha-trialkyl and N-acyl-alpha,alpha-dialkyl glycines by selective cleavage of Ugi-Passerini adducts. Qualitative assessment of the effect of substituents on the path and yield of reaction

Several symmetric N-acyl-N,alpha,alpha-trialkyl glycine amides were synthesised by the Ugi-Passerini four-component reaction and subjected to selective cleavage with trifluoroacetic acid. In almost all cases it was possible to obtain the corresponding N-acyl-N,alpha,alpha-trialkyl and N-acyl-alpha,alpha-dialkyl glycines in fair to good yields directly from the reaction adducts. With some of the bulkier compounds our results show that the selectivity of cleavage is concentration dependent with respect to the acid, which suggests kinetically controlled processes. The isolation of a stable oxazolone as the product of some of the reactions seems to confirm that amide cleavage involves in all cases formation of an oxazolone-type derivative.     

Study of ε-caprolactone polymerization by NIR spectroscopy

Near-infrared (NIR) spectroscopy is proposed for the in-line quantitative and kinetic study of the polymerization of ε-caprolactone and eventually to facilitate real-time control of the manufacturing process. Spectra were acquired with a fibre-optic probe operating in transflectance mode immersed in the reactor. The NIR data acquired were processed using a multivariate curve resolution alternating least squares (MCR-ALS) algorithm. The proposed method allows calculation of the concentration and spectral profiles of the species involved in the reaction. The key point of this method is the lack of reference concentrations needed to perform the MCR-ALS method. The use of an extended spectral matrix using both process and pure analyte spectra solves the rank deficiency. The concentration profiles obtained were used to calculate a kinetic fitting of the reaction, but the method was improved by applying kinetic constraints (hard modelling). The rate constants of batches at different temperatures and the energy of activation for this reaction were calculated. Whenever possible, the hard modelling combined with the MCR-ALS method improves the fit of the experimental data: the results show good correlation between the NIR and reference data and allow the collection of high-quality kinetic information on the reaction (rate constants and energy of activation).     

Application of two‐dimensional near‐infrared (2D‐NIR) correlation spectroscopy to the discrimination of three species of Dendrobium

The objective of this paper was to apply two‐dimensional (2D) near‐infrared (NIR) correlation spectroscopy to the discrimination of three species of Dendrobium. Generalized 2D‐NIR correlation spectroscopy was able to enhance spectral resolution, simplify the spectrum with overlapped bands and provide information about temperature‐induced spectral intensity variations that was hard to obtain from one‐dimensional NIR spectroscopy. The FT‐NIR spectra were measured over a temperature range of 30–140°C. The 2D synchronous and asynchronous spectra showed remarkable differences within the range of 5600–4750 cm⁻¹ between different species of Dendrobium. Copyright © 2009 John Wiley & Sons, Ltd.     

Estimation of the rate constants of second order reactions using mean centering of ratio spectra

A new application of the mean centering of ratio spectra method is proposed for estimation of the rate constants of second order reactions, using kinetic-spectrophotometric data. The method is based on the mean centering of the ratio spectra to obtain a kinetic profile of the product. Using computational fitting, the rate constant can be obtained without any ambiguity. An interesting feature of second-order reactions is that the number of steps in the reaction is less than the number of absorbing species, resulting in a rank-deficient response matrix. Through using row mean centering of ratio spectra, the pure response of the product of the reaction could be obtained, and thus an accurate estimation of rate constant would be possible. The applicability of the method was evaluated by using several model data. The reaction of 1,2-naphthoquinone-4-sulfonate sodium (NQS) and 3-nitroaniline (TNA) in ethanol as a real system was also studied applying the proposed method.     

Photoinduced electron-transfer substitution reactions via unusual charge-transfer intermediates.

The photoinduced substitution reactions of halogenated alkanes (1-haloadamantanes, 1-haloronorbornanes, menthyl chloride) with a homologous series of amines or alcohols (methylamine, 2-methyl-2-aminopropane, methanol, or 2-methyl-2-propanol) to form the corresponding alkane-substituted amines or ethers and HCl were investigated. The geometry of the bridgehead carbons made S(N)2 reactions impossible. Nonpolar reaction conditions were employed which made classical and nonclassical carbocation S(N)1 reaction pathways unlikely. The reaction rates were measured. Trapping experiments indicated that free radical reactions were uninvolved in the substitution product formation. A novel, photoinduced electron-transfer reaction mechanism involving a charge-transfer intermediate is proposed to explain the observed production of secondary amines and ethers. The excitation wavelength dependence (action spectrum) was measured and found to be comparable to the ultraviolet absorption spectra of the charge-transfer complexes. The stereochemical implications of the reaction mechanism were investigated. The formation of the methyl ether of (1R,2S,5R)-menthol was the only organic reaction product observed in the photoreaction between (1R,2S,5R)-menthyl chloride and methanol.     

Bioelectrochemistry as a tool for the study of aromatization of steroids by human aromatase

Bioelectrochemical conversion of androgens into estrogens was achieved using human aromatase immobilized on glassy carbon electrodes. According to substrate concentration used in the electrochemical cell, it was possible to accumulate the intermediates or to proceed toward the formation of the final estrogen product confirming the distributive nature of catalytic reaction. Furthermore, the catalytic rates showed that the first step of reaction is the limiting one. The results demonstrate that bioelectrochemistry can be employed for understanding complex enzymatic reactions, such as aromatization of steroids.     

杨梅酮的电化学和光谱性质研究

应用循环伏安和紫外光谱法研究杨梅酮氧化还原性质及其稳定性.结果表明:在B-R缓冲溶液中玻碳电极上,杨梅酮的氧化还原表现为两步氧化反应和两步还原反应.氧化反应对应于B环4-′OH和C环3-OH的氧化,还原反应对应于C环4位羰基还原为中间体自由基之后再进一步还原生成羟基.以上各步反应均为单电子单质子电极过程.杨梅酮的氧化还原反应与溶液pH关系密切,但其原因来自于去质子化作用,并导致它的抗氧化能力增强,但其最终氧化产物没有电化学活性,并吸附在电极表面,阻碍了电极过程电子传递.在pH 7.45~12.00范围内,杨梅酮也因去质子化作用导致紫外光谱Ⅰ带和Ⅱ带随pH增加,而发生红移,分解作用加剧.同时分解作用还与放置时间有关.     

Copolymerization of diglycidyl ether of bisphenol A with γ‐butyrolactone catalyzed by ytterbium triflate: Shrinkage during curing

Diglycidyl ether of bisphenol A (DGEBA) was cured with γ‐butyrolactone (γ‐BL) with ytterbium triflate as a catalyst. The curing was studied with differential scanning calorimetry, Fourier transform infrared (FTIR), and thermomechanical analysis. FTIR studies confirmed that four elemental reactions took place during the curing process: the formation of a spiroorthoester (SOE) by the reaction of DGEBA with γ‐BL, the homopolymerization of SOE, the homopolymerization of DGEBA, and the copolymerization of SOE and DGEBA. Moderate proportions of γ‐BL produced materials with higher glass‐transition temperatures, and the curing occurred with lower shrinkage after gelation because of the polymerization of SOE, with near‐zero shrinkage during the final stages of the curing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2794–2808, 2003     

Comparison of near-infrared and mid-infrared spectroscopy for the determination of distillation property of kerosene

Near-infrared (NIR) and mid-infrared (MIR) spectroscopy have been compared and evaluated for the determination of the distillation property of kerosene with the use of partial least squares (PLS) regression. Since kerosene is a complex mixture of similar hydrocarbons, both spectroscopic methods will be best evaluated with this complex sample matrix. PLS calibration models for each percent recovery temperature have been developed by using both NIR and MIR spectra without spectral pretreatment. Both methods have shown good correlation with the corresponding reference method, however NIR provided better calibration performance over MIR. To rationalize the improved calibration performance of NIR, spectra of the same kerosene sample were continuously collected and the corresponding spectral reproducibility was evaluated. The greater spectral reproducibility including signal-to-noise ratio of NIR led to the improved calibration performance, even though MIR spectroscopy provided more qualitative spectral information. The reproducibility of measurement, signal-to-noise ratio, and richness of qualitative information should be simultaneously considered for proper selection of a spectroscopic method for quantitative analysis.     

Solubility Parameters Based on IR and NIR Spectra: I. Correlation to Polar Solutes and Binary Systems

IR and NIR spectra were correlated to Hildebrand and Hansen solubility parameters through use of multivariate data analysis. PLS‐1 models were developed and used to predict solubility parameters for solvents, crude oils, and SARA fractions. PLS regression showed potential for good correlation of the solubility parameters with IR and NIR spectra. Principal component analysis of IR spectra showed that crude oils are grouped according to their relative contents of heavy components such as asphaltenes. PCA of IR spectra for SARA fractions resulted in obvious groupings of the respective fractions. Prediction of solubility parameters from IR spectra of polymers, crude oils, and SARA fractions gave values that are comparable to literature values. This study indicates that correlation of solubility parameters with IR and NIR spectra is possible. In turn, it may be possible to develop models that can predict the polarities of crude oils and crude oil fractions such as resins and asphaltenes.     

In situ monitoring of the seed stage of a fermentation process using non-invasive NIR spectrometry

Non-invasive NIR spectrometry has been used to monitor in situ the seed stage of a streptomyces fermentation process. The main spectral change occurred at 7263 cm(-1) in the 1st derivative spectrum, and from comparison with off-line NIR spectra acquired of components present in the fermentation broth, can be attributed to biomass. The biomass signal was constant for the first 20 h of the seed stage, after which it decreased before increasing again. The time at which the minimum occurred in the NIR profile was either the same or slightly earlier than that at which a maximum in the carbon dioxide evolution rate (CER) occurred. The changes observed for the biomass signal in the NIR spectra can be attributed to growth and then fragmentation of mycelia, which indicates a change in metabolic activity. Hence, it may be possible to use NIR spectrometry in situ to determine the optimum transfer time for the seed stage of a fermentation process. Spectra were also acquired of the final stage of the same fermentation process. The variation in the biomass signal in the NIR spectra was more complicated in the final stage owing to changes in stir rate, and biomass concentration and morphology.     

Formation of 8-nitroguanine and 8-oxoguanine due to reactions of peroxynitrite with guanine

Reactions of peroxynitrite with guanine were investigated using density functional theory (B3LYP) employing 6-31G** and AUG-cc-pVDZ basis sets. Single point energy calculations were performed at the MP2/AUG-cc-pVDZ level. Genuineness of the calculated transition states (TS) was tested by visually examining the vibrational modes corresponding to the imaginary vibrational frequencies and applying the criterion that the TS properly connected the reactant and product complexes (PC). Genuineness of all the calculated TS was further ensured by intrinsic reaction coordinate (IRC) calculations. Effects of aqueous media were investigated by solvating all the species involved in the reactions using the polarizable continuum model (PCM). The calculations reveal that the most stable nitro-product complex involving the anion of 8-nitroguanine and a water molecule i.e. 8NO(2)G(-) + H(2)O can be formed according to one reaction mechanism while there are two possible reaction mechanisms for the formation of the oxo-product complex involving 8-oxoguanine and anion of the NO(2) group i.e. 8OG + NO(2)(-). The calculated relative stabilities of the PC, barrier energies of the reactions and the corresponding enthalpy changes suggest that formation of the complex 8OG + NO(2)(-) would be somewhat preferred over that of the complex 8NO(2)G(-) + H(2)O. The possible biological implications of this result are discussed.     

Microwave‐assisted synthesis of a novel phosphorus‐containing spiroorthoester,characterization and cationic polymerization

A new phosphorus‐containing spiroorthoester, (1,4,6‐trioxaspiro [4,4] nonan‐2‐yl)‐methyl 3‐[10‐(9,10‐dihydro‐9‐oxa‐9‐phosphaphenanthrene‐10‐oxide)]‐propanoate (SOE‐P), was synthesized under microwave irradiation with a short reaction time (1 h), because classical thermal heating did not lead to the desired product. The structure of the new monomer was confirmed by ¹H, ¹³C, and ³¹P. SOE‐P was homopolymerized and copolymerized with phenylglycidyl ether with ytterbium triflate as a cationic initiator in DSC experiments. These reactions were monitored by FTIR/ATR, and the formation of poly(ether‐ester)s with a pendant bulky phosphorylated group was shown. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4722–4730, 2006     

Analysis of the CO2 and NH3 reaction in an aqueous solution by 2D IR COS: formation of bicarbonate and carbamate

The two-dimensional (2D) infrared correlation spectra obtained from the reaction time- and concentration-dependent IR spectra elucidates the reaction of CO2 and NH3 in an aqueous solution for CO2 absorption. In the synchronous 2D correlation spectra, the interrelation of the proton with carbamate and bicarbonate indicates that the pH level affected the formation reactions of the two products. Furthermore, the interrelation of carbamate with bicarbonate confirmed the conversion of carbamate into bicarbonate with the release of protons (or the decrease of the pH). From the experimental results including the asynchronous 2D correlation spectra, the reaction of the CO2 and aqueous ammonia proceeded through the following steps: formation of carbamate, formation of bicarbonate, release of protons, and conversion of carbamate into bicarbonate. The analysis of the formation of carbamate and bicarbonate by 2D infrared correlation spectroscopy provides useful information on the reaction mechanism of CO2 and NH3 in aqueous solutions.