尖端具有线性粘着力作用的加层空间的界面裂纹对稳态弹性波的散射

本文研究一类粘着型界面裂纹的弹性波散射问题．文中利用积分变换和积分方程方法推导了确定这类问题的奇异积分方程组．采用围道积分技术和切比雪夫多项式展开技术，得到了待定系数的非线性代数方程组．最后本文给出裂纹尖端粘着区的大小和界面应力的数值结果．     

尖端具有吸附性接触的界面裂纹对瞬态弹性波作用下的动态响应

建立并研究一类接触型界面裂纹模型对瞬态弹性波作用下的动态响应问题。文中利用积分变换和积分方程法推导了确定这类问题的奇异积分方程组。采用围道积分技术和切比雪夫多项式展开技术，得到了待定系数的非线性代数方程组。最后给出了裂纹尖端接触区大小和接触应力随时间变化的数值结果，揭示了这种接触裂纹的动力学特性及物理上的合理性。     

Stress distribution in a lap joint under tension-shear

This paper deals with the elastostatic load transfer of a tensile load in a model of an adhesive lap joint (tension-shear problem). The adhesive layer is regarded as infinitesimally thin and the displacement and traction vectors in the adherends are assumed to be continuous across the bond. The problem is reduced to a pair of Fredholm integral equations of the second kind which involve the mean angle between the deformed bond line and the tensile load. This angle, in turn, is determined by means of a scheme due to Goland and Reissner. Numerical results for the bond line stresses and the stress intensity factors at the ends of the bonded region are presented.     

Dynamic fracture analysis of adhesive bonded material under normal loading

Dynamic fracture behavior of a Griffith crack along the interface of an adhesive bonded material under normal loading is studied. The singular integral equations are obtained by employing integral transformation and introducing dislocation density functions. By adopting Gauss-Jacobi integration formula, the problem is reduced to the solution of algebraic equations, and by collocation dots method. their solutions can be obtained Based on the parametric discussions presented in the paper, the following conclusions can be drawn： （1） Mode I dynamic stress intensity factor （DSIF） increases with increasing initial crack length and decreasing visco-elastic layer thickness, revealing distinct size effect; （2） The influence of the visco-elastic adhesive relaxation time on the DSIF should not be ignored.     

Adhesive Frictionless Contact Between an Elastic Isotropic Half-Space and a Rigid Axi-Symmetric Punch

In this paper we consider the problem of adhesive frictionless contact of an elastic half-space by an axi-symmetric punch. We obtain integral equations that define the tractions and displacements normal to the surface of the half-space, as well as the size of the contact regions, for the cases of circular and annular contact regions. The novelty of our approach resides in the use of Betti’s reciprocity theorem to impose equilibrium, and of Abel transforms to either solve or substantially simplify the resulting integral equations. Additionally, the radii that define the annular or circular contact region are defined as local minimizers of the function obtained by evaluating the potential energy at the equilibrium solutions for each pair of radii. With this approach, we rather easily recover Sneddon’s formulas (Sneddon, Int. J. Eng. Sci., 3(1):47–57, 1965) for circular contact regions. For the annular contact region, we obtain a new integral equation that defines the inverse Abel transform of the surface normal displacement. We solve this equation numerically for two particular punches: a flat annular punch, and a concave punch.     

A generalized JKR-model for two-dimensional adhesive contact of transversely isotropic piezoelectric half-space

The aim of the present paper is to investigate the adhesive behavior between a transversely isotropic piezoelectric half-space and a cylinder punch subjected to combined mechanical and electric loads under plane-strain condition. The effect of adhesion is described by using a generalized JKR-model which can account for the non-slip condition in the contact regions. Analytical function theory is employed to find the solution of the resulting singular integral equations. Our analysis shows that the adhesive contact behavior for different types of piezoelectric materials may be quite different. The results obtained in this paper may be helpful to understand the contact mechanics of piezoelectric materials at micro-scale.     

Uniform indentation of the elastic half-space by a rigid rectangular punch

The problem considered is that of a rigid flat-ended punch with rectangular contact area pressed into a linear elastic half-space to a uniform depth. Both the lubricated and adhesive cases are treated. The problem reduces to solving an integral equation (or equations) for the contact stresses. These stresses have a singular nature which is dealt with explicitly by a singularity-incorporating finite-element method. Values for the stiffness of the lubricated punch and the adhesive punch are determined: the effect of adhesion on the stiffness is found to be small, producing an increase of the order of 3%.     

弹性体表面分层压缩失稳问题的数学弹性力学解

采用数学弹性力学的稳定平衡方程并结合富氏积分变换的方法研究了含表面平行裂纹的弹性体在压缩载荷下的表面分层失稳问题。导出了一级显式的精确齐次奇异积分方程组,然后.通过Gauss-Chebyshev积分公式,得到一组齐次代数方程组,从而求出临界压缩载荷。并将结果与经典的材料力学梁板稳定的研究方法所得结果进行了比较,指出经典方法误差太大而不适于求解此问题。最后,利用数学弹性力学解求出的等效弹性支承常数给出一个简单精确的临界压缩载荷计算公式。     

Semi-infinite medium with a cylindrical inclusion twisted by an annular die

The problem considered is that of torsion of an elastic half-space consisting of two materials which are separated by a cylindrical surface. It is assumed that there is perfect bonding at the common cylindrical surface. The torque is applied to the half-space through an annular rigid disc which is bonded to both materials. By use of integral transforms and the theory of dual integral equations the problem is reduced to that of solving a pair of simultaneous Fredholm integral equations of the second kind. These simultaneous integral equations are solved numerically. The numerical results obtained are exhibited graphically.Research for this paper was partially supported by the Natural Sciences and Engineering Research Council of Canada through NSERC Grant No. A4177.     

Shrink fit of an elastic layer having a cylindrical cavity

Summary This paper deals with the problem of determining the stress distribution in an elastic layer with a cylindrical cavity when the mixed boundary conditions are prescribed on the curved surface of the cylinder. The problem is simplified to that of finding the solution of dual integral equations arising from the mixed boundary conditions. These dual integral equations are subsequently reduced to a singular integral equation. The solution of this integral equation is obtained numerically, and the quantities of physical interest are calculated.     

THE AXISYMMETRIC MIXED BOUNDARY-VALUE PROBLEM OF THE VERTICAL VIBRATION OF A RIGID FOUNDATIONON SATURATED LAYERED SOIL SUBGRADE

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｅｌａｓｔｉｃｈａｌｆ＿ｓｐａｃｅｔｈｅｏｒｙｏｆｆｏｕｎｄａｔｉｏｎｖｉｂｒａｔｉｏｎａｎｄｔｈｅｓｔｕｄｙｏｆｓｏｉｌ＿ｓｔｒｕｃｔｕｒｅｉｎｔｅｒａｃｔｉｏｎｐｒｏｂｌｅｍｈａｖｅｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｉｎｔｅｎｓｉｖｅｒｅｓｅａｒｃｈｉｎｔｈｅｃｉｖｉｌｅｎｇｉｎｅｅｒｉｎｇ .ＳｉｎｃｅＬｕｃｏｅｔａｌ.[1]ｓｕｍｍａｒｉｚｅｄｔｈｅｖｉｂｒａｔｉｏｎｏｆａｃｉｒｃｕｌａｒｒｉｇｉｄｆｏｕｎｄａｔｉｏｎｒｅｓｔｉｎｇｏｎａｎｅｌａｓｔｉｃｈａｌｆ＿ｓ…     

Scattering of plane, elastic waves by a plane, rigid strip

The diffraction of time-harmonic, vertically polarized, plane elastic waves by a rigid strip is investigated with the aid of the integral-equation method. Using the integral representation for the particle displacement of the scattered wave, it is shown that the resulting integral equations of the first kind uncouple for this kind of obstacle. In them, the amounts by which the shearing stress and the tensile stress jump across the strip occur as unknown quantities. The integral equations are solved numerically. Normalized power scattering characteristics and scattering cross-sections are computed.The research reported in this paper has been supported by the Netherlands organization for the advancement of pure research (Z.W.O.).     

Scattering of plane, elastic waves by a plane crack of finite width

The diffraction of time-harmonic, vertically polarized, plane elastic waves by a crack of finite width is investigated with the aid of the integral-equation method. Using the integral representation for the particle displacement of the scattered field together with the constitutive equation, it is shown that the resulting integral equations uncouple for this kind of obstacle. In them, the amount by which the components of particle displacement jump across the crack occur as unknown quantities. The integral equations are solved numerically. Normalized power scattering characteristics and scattering cross-sections are computed.The research reported in this paper has been supported by the Netherlands organization for the advancement of pure research (Z.W.O.).     

Elastic wave scattering from a penny-shaped interface crack in coated materials

This paper is concerned with the elastic wave scattering induced by a penny-shaped interface crack in coated materials. Using the integral transform, the problem of wave scattering is reduced to a set of singular integral equations in matrix form. The singular integral equations are solved by the asymptotic analysis and contour integral technique, and the expressions for the stress and displacement as well as the dynamic stress intensity factors (SIFs) are obtained. Using numerical analysis, this approach is verified by the finite element method (FEM), and the numerical results agree well with the theoretical results. For various crack sizes and material combinations, the relations between the SIFs and the incident frequency are analyzed, and the amplitudes of the crack opening displacements (CODs) are plotted versus incident wavenumber. The investigation provides a theoretical basis for the dynamic failure analysis and nondestructive evaluation of coated materials.     

The closed form solution of a Mode-I crack in the piezoelectric/piezomagnetic materials

In this paper, the behavior of a Mode-I crack in the piezoelectric/piezomagnetic materials subjected to a uniform tension loading is investigated by the generalized Almansi’s theorem. Through the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, in which the unknown variables are the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the displacement jumps are directly expanded in a series of Jacobi polynomials. Then the closed form solution of this problem can be obtained.     

层状介质中的双Griffith交界裂纹的SH波散射(反平面运动)——近场解

本文研究层状介质中的双Griffith交界裂纹的SH波散射。文中采用积分变换法将双裂纹的弹性波散射化为对偶积分方程,进而将其转化为第一类奇异积分方程组,借助于第一类Chebyshev多项式,给出了奇异积分方程组的解答,并得到了双裂纹的动态应力强度因子的计算公式     

The plane solution for bending of joined dissimilar elastic semi-infinite strips

The problem is reduced to a system of two singular integral equations for determining the interface slope and shear stress. The dominant part of the system is analyzed to determine the order of the stress singularity and its dependence on the elastic constants. After removing logarithmic singularities from the right hand sides we solve these equations numerically for several chosen composites and the interface slope and traction are exhibited graphically. The solution should be relevant in studying adhesive joints by means of a bending test.     

Analysis of a crack in a half-plane piezoelectric solid with traction-induction free boundary

In this paper, the problem of a crack embedded in a half-plane piezoelectric solid with traction-induction free boundary is analyzed. A system of singular integral equations is formulated for the materials with general anisotropic piezoelectric properties and for the crack with arbitrary orientation. The kernel functions developed are in complex form for general anisotropic piezoelectric materials and are then specialized to the case of transversely isotropic piezoelectric materials which are in real form. The obtained coupled mechanical and electric real kernel functions may be reduced to those kernel functions for purely elastic problems when the electric effects disappear. The system of singular integral equations is solved numerically and the coupling effects of the mechanical and electric phenomena are presented by the generalized stress intensity factors for transversely isotropic piezoelectric materials.     

Thermal stresses in a two-dimensional infinite medium containing a rigid inclusion embedded in a line crack

This paper examines the problem of finding thermal stresses, caused by a symmetric indentation of a line crack by an inclusion in an infinite isotropic elastic heat conducting solid. The thermal and elastic problems are reduced to a system of triple integral equations. In each case the solution of the triple integral equations is obtained in a closed form. The expressions for the stress intensity factor at the edge of the line crack, the strain energy density function and the resultant pressure applied to the inclusion are obtained. The expression for the displacement component is also obtained. Finally the results for the physical quantities are displayed graphically.     

多孔饱和半空间上弹性圆板的动力分析

用解析方法研究多孔饱和半空间上弹性圆板的低垂直振动，首先用Ｈａｎｋｅｌ变换求解多孔饱和介质动力问题控制方程，然后按混合边值条件建立多孔饱和半空间上弹性板的垂直振动的对偶积分方程，用Ａｂｅｌ变换化对偶积分方程为第二类Ｆｒｅｄｈｏｌｍ积分方程，并给出了数值算例。