Kr2+辐照导致的Ca8LnNa(PO4)6F2(Ln=La,Nd和Sm)磷灰石结构陶瓷材料的非晶转变

采用传统固相烧结法成功制备出磷灰石结构材料Ca₈LnNa（PO₄）₆F₂（Ln=La,Nd和Sm）,并通过常规X射线衍射（X-ray diffraction,XRD）进行表征确定三种样品都为单一相。在室温条件下用800 keVKr2+对三种样品进行辐照实验,辐照后的样品利用掠入射X射线衍射（grazing incidence X-ray diffraction,GIXRD）进行表征获取其表面辐照损伤层的结构信息。发现在实验辐照剂量范围内（1.0×1014~7.0×1014cm-2）三种样品都发生了从晶体结构到非晶结构的转变,不过三种样品的抗辐照非晶性能却有差异,抗辐照非晶能力大小关系是Ca₈LaNa（PO₄）₆F₂ > Ca₈NdNa（PO₄）₆F₂ > Ca₈SmNa（PO₄）₆F₂。这是由于在Ca₈LnNa（PO₄）₆F₂中,当镧系核素半径越小时,将有更大概率占据Ca（2）位置与F形成比Ca-F更弱的离子键。因此,镧系核素半径越小,辐照下将有更多的点缺陷保留下来,更容易发生非晶相变。     

Li2K(IO3)3与Li2NH4(IO3)3的晶体结构

本文用X射线粉末法测定了Li₂K(IO₃)₃与Li₂NH₄(IO₃)₃的晶体结构和原子参数。发现Li₃K(IO₃)₃,Li₂NH₄(IO₃)₃与Li₂Rb(IO₃)₃同晶型,属单斜晶系,空间群为P2₁/α,每个单胞含有四个化合式量。室温的点阵常数分别为α=11.198?,b=11.046?,c=8.254?,β=111.53°,及α=11.327?,b=11.078?,c=8.341?,β=111.87°。讨论了二元化合物的形成与离子半径的关系。 关键词：     

掺铥钨酸镱钾激光晶体结构模拟及振动光谱

采用泡生法生长了掺铥钨酸镱钾（KTm_0.1Yb_0.9（WO₄）₂）激光晶体。利用X射线单晶衍射法和X射线粉末衍射法研究了KTm_0.1Yb_0.9（WO₄）₂晶体的物相与结构。采用X射线单晶衍射法并结合Diamond晶体结构绘图软件,获得了晶体内部结构模型图：该晶体是由WO₆、TmO₈/YbO₈和KO₁₂基团组成。W₂O₁₀二聚体通过WOW单氧桥相连,在平行于c轴方向上形成（W₂O₈）_n多重带。ReO₈和KO₁₂多面体共顶相连,沿[101]和[110]方向形成了具有二维层结构的延长带。X射线粉末衍射分析表明：该晶体具有低温β相双钨酸盐结构,属于单斜晶系,空间群C2/c;计算了晶胞参数、晶粒尺寸和结晶度。测试了晶体的振动光谱,对各个峰值的红外和拉曼活性及分子振动情况进行了归属,进一步验证了晶体中WO₆原子基团及单氧桥（WOW）和双氧桥（WOOW）的存在。     

Low-temperature AC conductivity of Bi2Sr2CaCu2O8+δ

We report measurements of anamolously large dissipative conductivities, σ₁, in Bi₂Sr₂CaCu₂O_8+δ at low temperatures. We have measured the complex conductivity of Bi₂Sr₂CaCu₂O_8+δ thin films at 100–600 GHz as a function of doping from the underdoped to the overdoped state. At low temperatures there exists a residual σ₁ which scales with the T=0 superfluid density as the doping is varied. This residual σ₁ is larger than the possible contribution to σ₁ from a thermal population of quasiparticles (QP) at the d-wave gap nodes.     

Crystal structure and phase transitions of [(C2H5)4N]6Bi8Cl30

A new [(C₂H₅)₄N]₆Bi₈Cl₃₀ crystal of the family of alkylammonium halogenobismuthates was grown. X-ray diffraction studies showed that the crystals are monoclinic, space group C2/m with a = 20.117(5), b = 12.682(3), c = 20.396(5) Å, β = 93.03(3), Z =2. The lattice consists of (C₂H₅)₄N⁺ cations and a new type of Bi₈Cl⁶⁻₃₀ anion. Dielectric studies revealed two closely-lying structural phase transitions around 241 K (on cooling). They were interpreted as due to a freezing of the rotational motions of tetraethylammonium cations.     

Synthesis and superconductivity of (Pb0.5Cd0.5)(Sr0.9R0.1)2(R′0.7Ce0.3)2Cu2Oy

New Pb based layered superconducting cuprates (Pb_0.5Cd_0.5)(Sr_0.9R_0.1)₂(R′_0.7Ce_0.3)₂Cu₂O_y with (R,R′) = (Eu,Gd), (Eu,Dy) and (Nd,Gd), have been successfully synthesized. The structure of (Pb,Cd)(Sr,Eu)₂(Gd,Ce)₂Cu₂O_y is determined using XRD data. The X-ray powder diffraction pattern can be indexed by the tetragonal structure with lattice parameters a = 3.8250 Å, C = 29.2235 Å and a space group of I4/mmm. The effects of synthesis conditions on (Pb,Cd)(Sr,Eu)₂(Gd,Ce)₂Cu₂O_y are studied and a T_c(onset) of 26 K is obtained by resistance measurements. It is isostructural to the superconductor (Pb,Cu)(Sr,Eu)₂(Eu,Ce)₂Cu₂O_y.     

ZnSb掺杂的Ge2Sb2Te5薄膜的相变性能研究

本文采用双靶(ZnSb靶和Ge₂Sb₂Te₅靶)共溅射制备了系列ZnSb掺杂的Ge₂Sb₂Te₅(GST)薄膜. 利用X射线衍射、透射电子显微镜、原位等温/变温电阻测量、X射线光电子能谱等测试研究了薄膜样品的非晶形态、电学及原子成键特性. 利用等温原位电阻测试表明ZnSb掺杂的Ge₂Sb₂Te₅薄膜具有更高的结晶温度. 采用Arrhenius 公式计算发现ZnSb掺杂的Ge₂Sb₂Te₅薄膜的十年数据保持温度均高于传统的Ge₂Sb₂Te₅薄膜的88.9℃. 薄膜在200, 250, 300和350℃ 下退火后的X射线衍射图谱表明ZnSb的掺杂抑制了Ge₂Sb₂Te₅薄膜从fcc态到hex态的转变. 通过对薄膜的光电子能谱和透射电镜分析可知Zn, Sb, Te原子之间键进行重组, 形成Zn–Sb 和Zn–Te 键, 且构成非晶物质存在于晶体周围. 采用相变静态检测仪测试样品的相变行为发现ZnSb掺杂的Ge₂Sb₂Te₅薄膜具有更快的结晶速度. 特别是(ZnSb)_24.3(Ge₂Sb₂Te₅)_75.7薄膜, 其结晶温度达到250℃, 十年数据保持温度达到130.1℃, 并且在70 mW激光脉冲功率下晶化时间仅～64 ns, 远快于传统Ge₂Sb₂Te₅薄膜的晶化时间～280 ns. 以上结果表明(ZnSb)_24.3(Ge₂Sb₂Te₅)_75.7薄膜是一种热稳定性好且结晶速度快的相变存储材料.     

Electrical transport and superconductivity in the Al2O3-Bi2Sr1.8Ca1.2Cu2Oy and MgO-Bi2Sr1.8Ca1.2Cu2Oy composites

We have measured the resistivities of Al₂O₃-Bi₂Sr_1.8Ca_1.2Cu₂O_y and MgO-Bi₂Sr_1.8Ca_1.2Cu₂O_y composites with the nominal Bi₂Sr_1.8Ca_1.2Cu₂O_y volume fraction, ₂₂₁₂, ranging from 0.15 to 1.00. For the Al₂O₃-Bi₂Sr_1.8Ca_1.2Cu ₂O_y composites, we find for the samples with ₂₂₁₂≥0.6 that the superconducting transition temperature, T_c, is not disturbed by the addition of Al₂O₃. For ₂₂₁₂<0.3, no zero-resistivity state is observed. For the MgO-Bi₂Sr_1.8Ca_1.2Cu₂O_y composites, T_c is barely disturbed for the samples with ρ₂₂₁₂≥0.7. No superconducting state is observed for the samples with ρ₂₂₁₂<0.35. The variation of (300 K) with ρ₂₂₁₂ indicates a three-dimensional percolating Bi-Sr-Ca-Cu-O matrix occurring at ρ₂₂₁₂≈0.19 and ≈0.15 in Al₂O₃-Bi₂Sr_1.8Ca_1.2 Cu₂O_y and MgO-Bi₂Sr_1.8Ca_1.2Cu₂O_y, respectively. Both resistivity and magnetization measurements suggest that the reactions of Bi₂Sr_1.8Ca_1.2Cu₂O_y with MgO are weaker than with Al₂O₃.     

Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

Pr2(Fe0.8Co0.2)14B磁结构的中子衍射研究

本文报道用中子衍射测定的含硼稀土过渡族金属间化合物Pr₂(Fe_0.8Co_0.2)₁₄B的晶体结构与磁结构。将中子三轴谱仪用作二轴粉末衍射仪,在室温测该化合物粉末样品的中子衍射强度,用轮廓精化法弥合衍射数据。该化合物属Nd₂Fe₁₄B类四方结构,α=8.8110?,c=12.2307?。设Pr,Fe和Co原子磁矩间为铁磁耦合,同一晶位的Fe,Co原子磁矩相等,存在沿c轴的易磁化 关键词：     

NMR study of monomethylammonium cation in (CH3NH3)5Bi2Cl11 ferroelectric polycrystal

Spin-lattice relaxation times T₁ and T_1ρ are determined for protons in three polycrystals (CH₃NH₃)₅Bi₂Cl₁₁, (CD₃NH₃)₅Bi₂Cl₁₁ and (CH₃ND₃)₅Bi₂Cl₁₁. The temperature dependencies of the relaxation times obtained for (CH₃NH₃)₅Bi₂Cl₁₁ and (CD₃NH₃)₅Bi₂Cl₁₁ are interpreted as a result of correlated motions of the three-proton groups of the monomethylammonium cation. The minimum of the T_1ρ relaxation time is explained as a result of the oscillations of the symmetry axis of the whole cation.     

Phase transitions and electrical properties of CsH(SO4)0.76(SeO4)0.24 mixed crystals

The study by X-ray diffraction, calorimetry, vibrational and impedance spectroscopy of CsH(SO₄)_0.76(SeO₄)_0.24 new solid solution is presented. Crystals of this composition undergo two phase transitions at T = 333 and 408 K. The last one at 408 K is a superionic-protonic transition (SPT) related to a rapid [HS(Se)O₄⁻] reorientation and fast H⁺ diffusion. A sudden jump in the conductivity plot confirms the presence of this transition. Above 408 K, this high temperature phase is characterized by high electrical conductivity (7 × 10^t-3 Ω⁻ cm⁻¹) and low activation energy (E_a < 0.3 eV).     

Desorption of H2 from W(110) and Fe covered W(110) surfaces

The kinetics of H₂ desorption from H/W(110) and H/Fe₁/W(110) were studied by measuring work function changes Δø vs time at a number of temperatures. Combination with previously determined Δø vs coverage data and differentiation at various fixed coverages gave rate vs T data from which activation energies of desorption could be obtained. E vs coverage results agree well with previously determine ΔH_des results. In the case of H/Fe₁/W(110) this includes a rise from 20 to 30 kcal mol⁻¹ of H₂ at H/Fe = H/W > 0.3. Plots of rate −dθ/dt vs θ (θ being coverage in units of H/W) vary much more steeply than θ² at most coverages for both systems. The θ dependence can be explained almost quantitatively in terms of the variations of ΔH_des and surface entropy S_s with coverage, by assuming that rates of desorption are equal to the equilibrium rates of adsorption. The latter can be formulated thermodynamically, except for a sticking coefficient, s. Values for s(θ, T) can also be obtained and show relatively little temperature dependence.     

镁-锌时效合金中一维过渡相β′2的晶体学研究

采用X射线衍射方法,显示出镁-5Wt％锌合金在165℃时效初期有两种过渡相β′₁和β′₂共存。对细杆状过渡相,β′₂的一维衍射现象进行了详细分析。这种过渡相具有六角点阵结构,其[0001]轴是杆的长轴,它的点阵常数及与母相间的取向关系经测定为:a_(β′2)=13.2?,c_(β′2)=5.25?,[0001]_{(β′2)关键词：}     

LiIO3-Zn(IO3)2 赝二元系的研究

用固态粉末烧结法配制样品,用X射线衍射及差热分析等方法研究并测定了LiIO₃-Zn(IO₃)₂赝二元系的相图。该二元系内存在一新相LiZn(IO₃)₃。它有较大的倍频效应,具有离子导电性。用自编的由粉末衍射数据求单斜晶系的点阵参数的计算机程序成功地求出了该化合物的点阵常数。经过进一步修正,确定它属于正交晶系,α=8.08l?,b=8.729?,c=11.595?,z=4。并确定了化合物存在的成分范围和条件。 关键词：     

Features of the electrochemical lithium insertion into monophosphate tungsten bronzes (PO2)4(WO3)2m (m=9 and 10)

Electrochemical lithium insertion into (PO₂)₄(WO₃)_2m, where m=9 and 10, has allowed the determination of several phases Li_x(PO₂)₄(WO₃)_2m between 3.4 and 0.01 V vs Li⁺/Li⁰. After the first cycle the electrochemical system was unable to maintain the high specific capacity of the cells (540 Ah/kg) due to irreversible processes. Nevertheless at high voltage values, above 1.4 V vs Li⁺/Li⁰, the lithium insertion proceeded through a reversible mechanism. By means of X-ray diffraction experiments we have detected the nature of different phases Li_x(PO₂)₄(WO₃)_2m formed and we have established a correlation with the reversible/irreversible processes detected during the electrochemical insertion.     

In2O3晶体电子结构和光吸收机理研究

为了得到准确的In₂O₃晶体电子结构, 本文分别采用GGA, GGA+U, HSE06的方法计算了电子结构, 并进行了G₀W₀修正, 通过比较计算结果, 得到HSE06+G₀W₀方法计算得到的禁带宽带最接近实验结果. 在此基础上使用Hedin的G₀W₀近似方法和Bethe-Salpeter方程计算得到了In₂O₃晶体的光学性质, 计算结果与实验结果吻合很好, 在此基础上通过对准粒子能带结构、光学跃迁矩阵和光学吸收谱的分析, 给出了In₂O₃晶体的光学跃迁机理.     

真空紫外光激发下Ce3+、Tb3+激活的BaCa2(BO3)2的发光性质

利用XRD、VUV及UV光谱等方法对Ce³⁺、Tb³⁺离子掺杂以及Ce³⁺、Tb³⁺离子共掺的3种BaCa₂(BO₃)₂荧光粉的相纯度、发光性质、浓度猝灭现象进行研究。结果表明:3种荧光粉在VUV波段有较好的吸收,基质吸收带位于140～190 nm范围。Ce³⁺在BaCa₂(BO₃)₂的最低4f5d跃迁带位置在360 nm附近,其5d→²F_J(J=5/2, 7/2)发射峰分别位于393,424 nm。Tb³⁺掺杂的样品在172 nm激发下的发射光谱由4个窄带组成,分别对应⁵D₄→⁷F_J(J=3,4,5,6)的跃迁,其中占主导位置的是⁵D₄→⁷F₅的跃迁,大约位于543 nm处,主要为绿光发射。在Ce³⁺,Tb³⁺离子共掺杂的BaCa₂(BO₃)₂光谱中,观察到Ce³⁺-Tb³⁺离子间有能量传递。     

垂直磁各向异性L10-Mn1.67Ga超薄膜分子束外延生长与磁性研究

具有超强垂直磁各向异性的L1₀-Mn_xGa薄膜由于其与半导体材料结构及工艺的高度兼容性而受到广泛关注, 其超高垂直磁各向异性能和极低的磁阻尼因子预示着L1₀-Mn_xGa薄膜在高热稳定性自旋电子学器件中将发挥重要作用. 而L1₀-Mn_xGa超薄膜对于降低L1₀-Mn_xGa基垂直磁各向异性隧道结中的磁矩翻转临界电流密度有着重要的意义. 本文采用分子束外延的方法, 在半导体GaAs衬底上成功制备出了一系列不同厚度的L1₀-Mn_1.67Ga薄膜, 厚度范围为1-5 nm. 生长过程中反射式高能电子衍射原位检测以及X射线衍射结果均表明了其良好的单晶相. 磁性测量结果表明, 厚度在1 nm以上的L1₀-Mn_1.67Ga薄膜均可以保持垂直磁各向异性特征, 厚度为5 nm的L1₀-Mn_1.67Ga薄膜的垂直磁各向异性能可达到14.7 Merg/cm³. 这些结果为基于L1₀-Mn_1.67Ga的垂直磁各向异性隧道结在自旋转移扭矩驱动的磁随机存储器等低功耗器件的集成及应用提供了重要的实验支持.     

A new procedure for the preparation of Tl2Ba2CaCu2O8-δ characterization by neutron diffraction, electron diffraction and HREM

A new procedure for the preparation of Tl₂Ba₂CaCu₂O_8-δ is presented. In the first step stoichiometric amounts of Cu(NO₃)₂·3H₂O, Ba(OH)₂·H₂O, CaO and Tl₂O₃ are reacted in a closed alumina crucible at 760°C to form a mixture of Tl- 2212, CuO, CaO and other oxide phases. In the second step this material is milled, pelletized and fired in a gold-sealed alumina crucible at 860–900°C for three to eight hours. Three batches of Tl-2212 prepared by this method were investigated showing less than 1% loss of thallium while T_c was close to 110 K. Rietveld refinements using time-of-flight neutron-diffraction data demonstrate that the method produces pure material in a reproducible way and that the materials are substoichiometric with respect to oxygen (δ=0.3). Investigations using electron diffraction and high-resolution electron microscopy indicate the absence of stacking faults.