Synthesis of cis-3-arylated cycloalkylamines through palladium-catalyzed methylene sp carbon–hydrogen bond activation

Methylene sp³ carbon–hydrogen bond activation of N-picolinoylcycloalkylamines provides a useful method for synthesizing cis-3-arylated cycloalkylamine derivatives. Pd(II) species catalyzed the γ-arylation of N-picolinoylcycloalkylamines with aryl iodides in the presence of silver carbonate to afford cis-3-arylated N-picolinoylalkylamines in up to 87% yield. Hydrolysis of the amide linkage to give the corresponding cis-3-arylated cycloalkylamines was also demonstrated.     

Practical one-pot sequential procedure for the preparation of N-arylated 3,4-disubstituted pyrroles from alkenes

By using ^tBuONa and Cs₂CO₃ as a mixed base, van Leusen pyrrole synthesis and copper-catalyzed N-arylation of pyrrole proceeded sequentially in a single flask to give N-arylated 3,4-disubstituted pyrroles smoothly. Thus, a series of desired N-arylated pyrroles were prepared directly from the electron-deficient alkenes.     

An efficient, mild, and selective Ullmann-type N-arylation of indoles catalyzed by copper(I) complex

A wide range of N-arylated indoles are selectively synthesized through intermolecular C(aryl)-N bond formation from the corresponding aryl iodides and indoles through Ullmann-type coupling reactions in the presence of a catalytic amount of easily available N,N,N′,N′-tetramethyl-BINAM-CuI complex under very mild reaction conditions.     

Palladium-catalyzed highly regioselective and stereoselective arylation of electron-rich allylamines with aryl bromides

A palladium-catalyzed, highly efficient Heck arylation of electron-rich N,N-diprotected allylamine derivatives with a wide range of aryl bromides under ligand-free conditions has been developed. In the presence of Pd(OAc)₂ and an appropriate additive, the reaction proceeds with excellent regioselectivity and stereoselectivity, leading exclusively to the γ-arylated (E)-allylamine products in good to excellent yields. It was found that the choice of solvent, olefin, additive and temperature has an important influence on the reaction. Worthy of note is that good results were observed only when using N,N-diprotected allylamines containing carbamate moiety, and the steric properties of allylamines also have important impacts on the regiocontrol. The use of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) or HQ (hydroquinone) as the additive is also crucial for securing a faster reaction rate. This method provides a straightforward approach for the efficient synthesis of various γ-arylated, linear (E)-allylamines.     

Ring opening of 2-(cyanomethyl)aziridines by acid chlorides: synthesis of novel 4-amino-2-butenenitrile derivatives through intermediate aziridinium salts

1-Arylmethyl-2-(cyanomethyl)aziridines were transformed into novel N-arylmethyl-N-(2-chloro-3-cyanopropyl)amides as the major reaction products upon treatment with acid chlorides in CH₂Cl₂ through the ring opening of intermediate aziridinium salts. Subsequently, N-arylmethyl-N-(2-chloro-3-cyanopropyl)amides were converted into stable N-arylmethyl-N-(3-cyano-2-propenyl)amides for the first time by means of a dehydrochlorination mediated by Et₃N in CH₂Cl₂.     

N-[1-(Benzotriazol-1-yl)alkyl]amides from N-acyl-α-amino acids or N-alkylamides

A variety of N-(1-methoxyalkyl)amides react with benzotriazole in the presence of PPh₃·HBF₄ and organic bases (Hünig's base, DBU or DABCO) or solid-state-supported bases (SiO₂-Pip or IRA-67) in CHCl₃ to give N-[1-(benzotriazol-1-yl)alkyl]amides in good yields. The most convenient and efficient procedure for obtaining N-[1-(benzotriazol-1-yl)alkyl]amides consists, however, of the addition of benzotriazole sodium salt to a solution of crude 1-(N-acylamino)alkyltriphenylphosphonium salt, obtained in situ from N-(1-methoxyalkyl)amides and PPh₃·HBF₄. A combination of these reactions with the recently described electrochemical decarboxylative α-methoxylation of N-acyl-α-amino acids in the presence of SiO₂-Pip enables an effective two-pot transformation of N-acyl-α-amino acids to N-[1-(benzotriazol-1-yl)alkyl]amides.     

Efficient N-arylation of pyridazin-3(2H)-ones

A variety of substituted pyridazin-3(2H)-ones are directly N-arylated in good yield using lead tetraacetate/zinc chloride in benzene or in substituted benzenes including chloro- and bromobenzene.     

Palladium-catalyzed α-arylation of N-protected 2-piperidinones

A very simple method for obtaining α-arylated N-protected 2-piperidinones in high yield is described. The use of ZnCl₂ and Pd(dba)₂ and the nature of the base are the key factors.     

Convenient synthesis of C-terminal di- and tri-peptide amides from N-protected dipeptidoylbenzotriazoles

N-Protected dipeptidoylbenzotriazoles react with aqueous ammonia to give dipeptide primary amides (77-98%) and with N-unprotected α-amino amides to afford tripeptide primary amides (82-86%).     

Synthesis and conformational analysis of N-aryl-N-(3-thienyl)acetamides

The cis-trans conformational equilibrium of amides is of interest because it can be used to control functional activity. Here, we designed and synthesized a series of N-(3-thienyl)amides in order to study the factors affecting their conformational equilibrium. NMR studies showed that the major conformer of N-methyl-N-(3-thienyl)amide in solution is the E-form (cis form), as is the case for N-methylacetamide. For N-aryl-N-(3-thienyl)amides bearing an N-phenyl moiety, the major conformers differ depending on not only the relative π-electron density of the N-aryl moiety, but also its size. X-ray analysis showed that their solid-state conformational preferences were similar to those in solution.     

Photostability of hydrophobic amides of pyridinecarboxylic acid as copper extractants from chloride media

The photostability of N-alkyl and N,N-dialkylpyridine-3-carboxamide, and N-alkyl and N,N-dialkylpyridine-2-carboxamide, and their copper complexes were studied. The obtained results indicated the influence of light (UV and vis) on the stability of pyridinecarboxamides. The degree of photodegradation depended on the type of solvent, the presence of water, hydrochloric acid or air in the solution. Also, the structure of compounds (the number and position of the amides group, structure of the amides carbon chain) influenced amides photostability. Products of photofragmentation of amides groups and photosubstitution at the pyridine ring were identified. Influence of ions of copper(II) and chloride during the photodegradation of copper complexes with pyridinecarboxamide was analyzed.     

Direct transformation of N,N-disubstituted amides and isopropyl esters to nitriles

Various N,N-dimethyl amides, N-methoxy-N-methyl amides, and isopropyl esters were smoothly transformed into the corresponding nitriles in good to moderate yields by the treatment with diisobutylaluminium hydride, followed by treatment with molecular iodine in aq ammonia. The present reactions are novel one-pot and practical methods for the transformation of N,N-disubstituted amides and isopropyl esters into nitriles, through the formation of hemiaminal O-AlBu₂ and hemiacetal O-AlBu₂, respectively.     

Synthesis and conformational analysis of N-aryl-N-(6-azulenyl)acetamides

We synthesized a series of N-(6-azulenyl)-N-arylacetamides, and investigated their conformational preferences in solution and in the crystalline state by means of NMR and X-ray analyses. The results indicated that the conformational preferences of these amides are dependent on both the relative π-electron densities of the N-aromatic parts and the three-dimensional relationship of the carbonyl group to the aryl groups. The N-(6-azulenyl) group has a very different effect from the previously reported N-(2-azulenyl) group on the conformational preferences of aromatic amides.     

Simple and efficient cleavage of the N-(1-phenylethyl) unit of carboxamides with methanesulfonic acid

Cleavage of the N-(1-phenylethyl) unit of carboxamides using less than 1 equiv of MsOH in refluxing toluene was found to be simple and very efficient leading to the desired amides in good to excellent yields, and also proved to be more effective compared with reductive methods using hydrogen sources, or acid hydrolysis reagents such as TFA and TsOH. The method selectively cleaved only the N-(1-phenylethyl) group of N-benzyl-N-(1-phenylethyl)amides.     

Modular synthesis of α-arylated carboxylic acids,esters and amides via photocatalyzed triple C–F bond cleavage of methyltrifluorides

α-Arylated carboxylic acids, esters and amides are widespread motifs in bioactive molecules and important building blocks in chemical synthesis. Thus, straightforward and rapid access to such structures is highly desirable. Here we report an organophotocatalytic multicomponent synthesis of α-arylated carboxylic acids, esters and amides from exhaustive defluorination of α-trifluoromethyl alkenes in the presence of alkyltrifluoroborates, water and nitrogen/oxygen nucleophiles. This operationally simple strategy features a unified access to functionally diverse α-arylated carboxylic acids, esters, and primary, secondary, and tertiary amides through backbone assembly from simple starting materials enabled by consecutive C–F bond functionalization at room temperature. Preliminary mechanistic investigations reveal that the reaction operates through a radical-triggered three-step cascade process, which involves distinct mechanisms for each defluorinative functionalization of the C–F bond.

Here we report an organophotocatalytic synthesis of α-arylated carboxylic acids, esters and amides from exhaustive defluorination of α-trifluoromethyl alkenes in the presence of alkyltrifluoroborates, water and nitrogen/oxygen nucleophiles.     

Discovery and application of iminotriphenylphosphorane as a formal aromatic primary amine protecting group

During our efforts to selectively synthesise N-arylated benzotriazole fragments, we developed a new primary aromatic amine protecting group strategy showing significant advantages over recognised protecting groups.     

New investigation of Vilsmeier-type reaction using pyrazolones with various amides

New investigation of Vilsmeier-type reaction was evaluated to realize the solvent effect by using pyrazolones to react with various of amides, including formamide, N-methylformamide, N-propylformamide, N-tert-butylformamide, N,N-dimethylformamide (DMF), N,N-diethylformamide (DEF), N,N-dipropylformamide (DPF), N,N-diisopropylformamide, N,N-dibutylformamide, piperidine-1-carbaldehyde, and pyrrolidine-1-carbaldehyde, in the presence of phosphorous oxychloride POCl₃. The unexpected resulting products were observed in this work according to the difference chemoseletivities of substituted amides. The plausible reactive pathways were proposed to explain the experimental result.     

Amidine derivatives of α-arylglycines from N-(1-aryl-2,2,2-trichloroethyl)amides of arenesulfonic acids and secondary amines

The interaction of N-(1-aryl-2,2,2-trichloroethyl)amides of arenesulfonic acids with secondary amines or their salts in the presence of inorganic bases involves the formation of chloroaziridine intermediates. Depending upon the solvent and reagent ratio, the reaction results in N-[1-dialkylamino-2-chloro-2-arylethylidene]-, N-[2-dialkylamino-1-chloro-2-arylethylidene]-, N-[1,2-bis(dialkylamino)-2-arylethylidene]-, and N-(1,2-dioxo-2-arylethene)amides of arenesulfonic acids.     

Selective N-debenzylation of amides with p-TsOH

N-Benzylamides were debenzylated efficiently with 4 equiv. of p-TsOH in refluxing toluene. Good to quantitative yields of the desired primary amides were obtained within 2-4 h from a wide variety of N-2,4-dimethoxybenzylamides. N-4-Methoxylbenzyl amides and N-benzylamides were also debenzylated cleanly. In the case of N-2,4-dimethoxylbenzylamides, selective N-debenzylation was possible in the presence of N-Fmoc, N-t-BOC or N-trityl-protection. Protected amino acid amides survived these conditions without any detectable epimerization.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.