共查询到20条相似文献,搜索用时 78 毫秒
1.
交联FFAP极性固定相非晶硅膜改性弹性玻璃毛细管气相色谱柱是一种新柱型,具有柱效高、化学惰性好、稳定性好、抗溶剂、抗腐蚀和耐高温等性能,本文报道了该新型色谱柱的制备及其性能研究。 相似文献
2.
溶胶-凝胶毛细管气相色谱柱热稳定性的考察 总被引:13,自引:0,他引:13
溶胶—凝胶毛细管气相色谱柱是一类新型的色谱柱。通过与静态法涂渍并用自由基引发交联使固定相固载化的色谱柱比较,溶胶—凝胶色谱柱除了具有制作工艺简单、分离效果好等特点外,还具有很好的热稳定性和溶剂稳定性。其工作温度可高于400℃。 相似文献
3.
4.
研究了非晶硅膜改性的弹性玻璃毛细管交联OV-1701中等极性固定相色谱柱。在适当温度下,采用过氧化二异丙苯(DCUP)游离基引发交联OV-1701固定液,成功地制备了交联OV-1701柱,该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能,是一种新型高性能的中等极性交联柱。 相似文献
5.
报导了采用石英Al2O3PLOT柱分析油气化探样品的组成,在同一色谱条件下,该柱既能用于野外采样后现场直接分析游离烃,又能在室内分析酸解烃。具有分析周期短,重复性好,柱寿命长等优点,为石油勘探取样迅速准确的分析发挥了重要作用。 相似文献
6.
烟道气组成的快速测定 总被引:1,自引:0,他引:1
将Porapak柱、Chromosorb P柱及5A分子筛柱串联后再并联,构成一个无阀切换的二维色谱,用于测定烟道气组成;一次进样就可分析烟道气中一氧化碳、二氧化碳和氧气等组分,该法具有分析速度快、重复性好、准确度高的特点,有较大的实用价值。 相似文献
7.
8.
自行研制了Bentone-34/0V-1高效石英毛细管气相色谱柱,并利用该柱分别对二甲苯、二氯苯和二氯甲苯异构体3种体系进行分析。在选用的色谱条件下,难分离物喷对二甲苯和间二甲苯分离度达3;间二氯苯和对二氯苯分离度达137结果表明该柱具有分离效果好,分析速度快的优点。 相似文献
9.
微填色谱柱具有柱效高、分析速度快及样品负荷量较大等优点,故可以直接进料和直接与质谱联用,对痕量分析有利。微填色谱柱可用填料范围广,填料用量又少,故可用一些难获得的性能好的填料,由于使用的填料能成批制备,且制柱方法简单,故制柱的重复性好。 相似文献
10.
11.
12.
13.
玻璃芯毛细管柱的研制 总被引:1,自引:0,他引:1
介绍了含玻璃内芯的新型毛细管色谱柱的制备方法,以正癸烷和正庚烷为测试物,测定了这种柱子的柱效率和柱容量,并与普通玻璃毛细管柱进行了比较。结果表明,所制玻璃芯毛细管柱的柱效率和柱容量均优于普通毛细管柱。用玻璃芯毛细管柱及使用这种柱子的GC/FTIR联用系统分别分析了烷芳烃混合物和合成汽油样品,取得了满意的结果。 相似文献
14.
A new type of capillary column for gas chromatography was proposed. A sorbent layer (for example, stationary liquid phase) is supported on the internal capillary surface, and the internal (interstitial) volume is packed with nonporous large particles of a sorbent (particle diameter is 0.1—0.6 of the capillary internal diameter). The external surface of the particles can also be coated with the sorbent layer (for example, stationary liquid phase). The specific separation efficiency (number of separation) on the new type column is by 1.6—2.3 times higher than that of the initial classical capillary column. 相似文献
15.
混合模式毛细管整体色谱柱由于保留机理多样,具有很好的应用前景。本文以[2-(甲基丙烯酰基氧基)乙基]二甲基-(3-磺酸丙基)氢氧化铵(SPE)为单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,正丙醇/1,4-丁二醇/水三元体系为致孔剂,制备了聚合物基质SPE-co-EDMA毛细管液相色谱整体柱。通过系统优化致孔剂和反应物种类和配比、引发剂的用量、反应时间和反应温度等因素,提高了整体柱的柱效、机械强度、渗透性和重复性。结果表明该毛细管整体柱在10 MPa内具有良好的机械强度,渗透性为2.17×10-14 m2,而且批次内和批次间峰面积的重现性(RSD)分别为1.0%和4.6%。以极性和非极性的多种化合物评价了该毛细管整体柱的色谱性能,结果表明该柱在高有机相中具有亲水相互作用机理,在低有机相中具有反相作用机理,显示出混合模式分离特性。 相似文献
16.
17.
18.
Guohong-Zhao Xiaoqiang-Lei Zhonglai-Wang Chengke-Gong Hanqing-Wang Liren-Chen 《Chromatographia》2003,58(7-8):465-469
Summary A new method is described to prepare polymeric porous-layer open-tubular (PLOT) columns by using a two-step in-situ polymerization technology. The integrated method involves a straightforward in-situ polymerization of the monomer. By using -(trimethoxysilyl)propyl methacrylate as a bridge, the porous polymer is bonded to the columns inner wall, and this polymer is crosslinked so the whole polymer looks like a single moleculer. The new column avoids the defects of traditional polymer PLOT columns where particles are easily released and swept through the column, causing blockage or a spiking detection signal. The new type of PLOT column is coated with a divinylbenzene and ethylene glycol dimethyl acrylate copolymer and has an increased polarity when compared to a conventional polymer Q-type PLOT column. The retention characteristics of the new column were evaluated and found to be comparable with the commercially available HP PLOT-U column. The inertness of the porous polymer allows the elution of a range of apolar and polar compounds: even most active and polar compounds such as H2O and H2S eluted symmetrically. The new column possesses high stability and can withstand temperatures up to 210 °C. With this new type of capillary columns, significantly better mechanical stability, temperature endurance, reproducibility, strong separation power and good inertness are obtained in combination with short analysis times. 相似文献
19.