Evolution of molecular weight distributions in the catalytic chain transfer polymerization of methyl methacrylate up to high monomer conversions

The evolution of molecular weight distributions (MWDs) with monomer conversion in the catalytic chain transfer (CCT) polymerization of methyl methacrylate at 60 °C is investigated by simulation (via the program package PREDICI®) and experiment. A Co(III)‐based complex is used as the precursor for the CCT agent, which is formed in situ by initiator‐derived (2,2′‐azobisisobutyronitrile) radicals to yield the catalytically active Co(II) species. The small shifts seen in the MWD toward lower molecular weights with increasing monomer conversion are shown to be of the same order of magnitude as the associated changes in the MWD in non‐CCT controlled free‐radical polymerization, indicating that no significant change in the MWD with monomer conversion is associated with the CCT process. These results are compared to the evolution of MWDs in conventional chain transfer polymerizations with thiols as transfer agents. A clear shift toward higher molecular weights is seen with increasing monomer conversion, indicating disparate rates of thiol and monomer consumption. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3303–3312, 2000     

含芳酰胺结构的新型甲壳型液晶高分子PMPACS的聚合反应动力学研究

采用称量法和GPC,研究了以二甲基乙酰胺为溶剂,偶氮二异丁腈为引发剂,自由基溶液聚合制备含芳酰胺结构的新型甲壳型液晶高分子聚[乙烯基对苯二甲酸二(4-甲氧基苯胺)](PMPACS)的聚合反应动力学.研究发现,(1)MPACS的聚合反应在60℃时主要为双基偶合终止,所以反应后期聚合物分子量明显增大,分子量分布变窄;(2)该反应的聚合反应速率方程为Rp=kp[M][I]1/2,表观活化能Eα=44 kJ/mol,在60℃时的聚合反应常数kp=1.04 L·mol-1·h-1;(3)相同聚合条件下,单体的转化率和数均分子量随单体初始浓度[M]0的增加而增大,当引发剂浓度[I]0增加时,聚合物的分子量随之降低,分子量分布增大;(4)该研究虽采用普通自由基聚合,所得聚合物的分子量分布却较窄,仅为1.1～1.4.     

Living radical polymerization of acrylonitrile catalyzed by copper with a high concentration of radical initiator and its application in removal of Ag(I) after modification

In this study, we reported the synthesis of polyacrylonitrile (PAN) via living radical polymerization in N, N‐dimethylformamide using carbon tetrachloride as initiator, copper(II) chloride (CuCl₂)/hexamethylenetetramine as catalyst system, and 2,2‐azobisisobutyronitrile as a high concentration of thermal radical initiator. The polymerization proceeded in controlled/living manner as indicated by first‐order kinetics of the polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion and narrow polydispersity. Higher polymerization rate and narrower molecular weight distributions were observed with CuCl₂ less than 50 ppm. The rate of polymerization showed a trend of increase along with temperature. The modified PAN containing amidoxime group was used for extraction of Ag(I) ions from aqueous solutions. The adsorption kinetics data indicated that the adsorption process followed pseudo‐second‐order rate model. The isotherm adsorption process could be described by the Freundlich isotherm model. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Radical polymerization of 2,5‐norbornadienes containing ester groups by AIBN and oxygen gas

New 2,5‐norbornadiene‐type monomers bearing 1‐adamantyl and cyclohexyl ester groups on their 2‐position polymerized with azobisisobutyronitrile to form the polymers consisting of two types of polymer unit structures. The major part had a saturated nortricyclene framework, which was formed by 2,6‐addition along with intramolecular cyclization on the norbornadiene moiety. The minor part consisted of 2‐norbornene‐type units constructed via 2,3‐addition. A series of norbornadiene‐based monomers spontaneously polymerized in the presence of oxygen. Because a radical inhibitor, namely hydroquinone, could suppress this spontaneous reaction, it was indicated that the oxygen‐induced polymerization proceeds via free‐radical polymerization mechanism. Changing a quantity of provided oxygen gas (O₂) to a norbornadiene monomer significantly affected on polymerization results, in specific, molecular weight of the formed polymer, which indicated that oxygen serves as one of the key reagents for the formation of free‐radical initiating species. It was proven that the combination of norbornadiene ethyl ester with O₂ was applicable as a new free‐radical initiator for polymerization of methyl methacrylate. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2528–2536     

RAFT聚合合成高分子量嵌段聚合物

以合成高分子量聚合物为目标,以苯基二硫代乙酸-1-苯基乙酯(PEPDTA)作为RAFT试剂,研究引发剂的种类(偶氮二异丁腈(AIBN)、1-1′-偶氮环己腈(ACC))、用量及聚合温度对苯乙烯/丙烯酸丁酯RAFT共聚合过程和聚合物结构的影响.结果发现,由于体系中RAFT浓度很低,相应的引发剂浓度要比传统自由基聚合低得多,只有采用较高的聚合温度和低分解速率常数的引发剂(ACC),才能制得无活性聚合物分率低(<0.1)、分子量高的聚合物,并进一步得到杂质含量少、分子量分布窄的嵌段聚合物.     

Physically controlled,free‐radical polymerization of vaporized fluoromonomer on solid surfaces

Gas/vapor‐deposition polymerization (GDP) of vinyl monomer is expected to exhibit a unique polymerization behavior different from its polymerization in the liquid phase. Free‐radical GDP of 2,2,3,3,3‐pentafluoropropyl methacrylate (FMA) was carried out with a conventional free‐radical initiator (azobisisobutyronitrile) on substrate surfaces. A linear relationship between the number‐average molecular weight and polymer yield was observed, and the consecutive copolymerization of methyl methacrylate (MMA) and FMA led to the formation of block copolymer P(MMA‐block‐FMA). These results suggested that the GDP process on substrate surfaces has a living nature. During the process, the active species at growing chain ends may be immobilized on the deposit surface and restricted from the chain‐transfer reactions, resulting in a continuation of the propagation reaction. The GDP on substrate surfaces is therefore a physically controlled polymerization process. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2621–2630, 2004     

低相对分子质量苯乙烯-马来酸酐交替共聚物的合成

将引发剂偶氮二异丁腈(AIBN)、共聚单体苯乙烯(St)和马来酸酐(MA)溶解于甲苯中,采用沉淀聚合法合成苯乙烯-马来酸酐共聚物(SMA).分别研究了反应温度、引发剂用量、反应时间、单体配比和单体浓度对聚合物得率和酸酐含量的影响.采用正交实验确定最优反应条件为:单体浓度20%,单体物质的量比为1∶1,引发剂用量为0.60%,反应温度为86℃,反应时间2h,产物得率为86.86%,酸酐含量为50.28%.并利用傅里叶变换红外光谱(FTIR)、核磁共振碳谱(~(13)C NMR)、凝胶渗透色谱(GPC)和热分析法分别研究聚合物的分子结构、相对分子质量及相对分子质量分布和热稳定性.结果表明产物是苯乙烯-马来酸酐交替共聚物,相对分子质量分布较窄,具有良好的热稳定性.     

Precipitation polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

We report the successful precipitation polymerization of 2‐hydroxyethyl methacrylate (HEMA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 15 to 27 MPa utilizing 2, 2′‐azobisisobutyronitrile (AIBN) as a free radical initiator. The effects of the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time were investigated. Analyses by scanning electron microscopy (SEM) indicated that in all reaction conditions, polymerization in the absence of stabilizer led to the formation of large aggregates of partially coalesced particles, with diameters of approximate 1–10 µm. Analyses by gel permeation chromatography (GPC) indicated that for the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time studied there are appreciable effect on product molecular weight. Copyright © 2011 John Wiley & Sons, Ltd.     

Microemulsion Polymerization: An Undergraduate Experiment in the Synthesis of Nanosized Polystyrene Particles

The synthesis of polystyrene nanoparticles through microemulsion polymerization is presented as an undergraduate advanced organic laboratory exercise. The resultant polymers molecular weight and particle size are studied as a function of monomer and initiator concentration. A comparison of cationic vs. anionic surfactants, and their effects on the polymer produced through microemulsion polymerization are also investigated. A direct relationship is observed between molecular weight and monomer concentration. A direct relationship is also found for the particle size of the latex produced. An inverse relationship is observed for molecular weight and particle size as the initiator concentration was raised. Comparison of molecular weight and latex size for cationic and anionic surfactants demonstrates that the anionic surfactant produces both a higher molecular weight and a larger latex size over the entire monomer and initiator concentration ranges.     

Effect of dose rate on radiation-induced polymerization of styrene adsorbed on silica gel

The effect of dose rate on the rate of polymerization and molecular weight distribution of radiation-induced polymerization of styrene adsorbed on silica gel was studied in a wide dose rate range of 4.4 × 10⁴ to 3 × 10⁸ rad/hr by γ rays of ⁶⁰Co and electron beams with a Cockcroft-Walton-type accelerator. Dose rate dependence on the initial rate of polymerization was about 1 below 3 × 10⁷ rad/hr, and it decreased gradually at high dose rates. Throughout the dose rate range, graft polymerizations and homopolymerizations by cationic and radical mechanisms proceeded simultaneously. Dose rate dependence of the cationic polymerization was 1 below 3 × 10⁷ rad/hr, while dose rate dependence of the radical polymerization was 0.65 below 3 × 10⁷ rad/hr. At high dose rates, molecular weight and fraction of graft polymer decreased, and fraction of cationic polymerization increased. A very high-molecular-weight graft polymer was formed above 4.4 × 10⁵ rad/hr at the initial stage of the polymerization. The dose rate dependence of this polymerization was larger than 1 and decreased with increase in dose rate. The polymerization seems to be related to an excitation of monomer or growing chain.     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

丙烯腈的悬浮聚合

<正> 适用于普通溶液纺丝加工成形的聚丙烯腈(PAN)的分子量一般在5—8万范围内,近年来发展起来的冻胶纺丝方法使得(?)>4.0×10~5的超高分子量PAN也可以纺丝成形,成为制备高强高模PAN纤缎的有效方法之一。随着PAN材料应用领域的开拓,合成超高分子量的PAN是一个首要解决的问题。     

Free-radical polymerization of phenylacetylene

The free-radical polymerization of phenylacetylene initiated by azobisisobutyronitrile at 50°C was studied in bulk and in the presence of benzene and toluene. The polymerization rate is approximately first-order with respect to the initiator concentration. The number-average molecular weight of the polymer is independent of the initiator concentration in bulk and is approximately proportional to the monomer concentration in the presence of the two diluents, but independent of their nature. The data are consistent with a mechanism based on first-order decay of active to inactive radicals. This step appears to exert the major control over kinetic and molecular chain lengths. Chain transfer to the monomer is concluded to be absent or to make only a small contribution to molecular termination.     

Photopolymerization of methylmethacrylate using triethylamine-benzoylperoxide redox initiator system

Photopolymerization of MMA was studied kinetically at 35° using TEA-BZ₂O₂ redox system as initiator. The initiator exponent is 0.34 but the monomer exponent depends on the solvent. Solvents (acetonitrile, pyridine and bromobenzene) giving negative or fractional monomer exponent show a rate enhancing effect through actively influencing the initiation step; benzene and chloroform give first order dependence of rate on [monomer] and behave as normal (inert) diluents. Initiation of polymerization takes place through radicals generated by photodecomposition of TEA-BZ₂O₂ complex formed in situ, the radical generation step being solvent or monomer dependent. Kinetic non-idealities are interpreted in terms of significant initiator dependent termination via degradative chain transfer.     

Polymerization of vinyl chloride at reduced monomer accessibility. II. Polymerization at subsaturation pressure with emulsion PVC as seed

Vinyl chloride was polymerized at 59–92% of saturation pressure in a water-suspended system at 45–65°C with an emulsion poly(vinyl chloride) (PVC) latex as a seed. A water-soluble initiator was used in various concentrations. The monomer was continuously charged as vapor from a storage vessel kept at lower temperature. Characterization included determination of molecular-weight distribution and degree of long-chain branching by gel permeation chromatography (GPC) and viscometry, thermal dehydrochlorination, and microscopy. The polymerization rate decreases with decreasing pressure but is reasonable even at the lowest pressure. The molecular weight decreases with decreasing pressure and increasing initiator concentration and also with increasing polymerization temperature, if the initiator concentrations are chosen to give a constant initiator radical concentration. The degree of long-chain branching increases with increasing initiator concentration and decreasing monomer pressure but is unaffected by the polymerization temperature, if the initiator radical concentration is kept constant. The thermal stability decreases with decreasing M _n, while the degree of long-chain branching has only a minor influence. The most important factor in the system influencing the molecular parameter is the monomer accessibility.     

Modeling stable free-radical polymerization

A kinetic model has been developed for stable free-radical polymerization (SFRP) processes by using the method of moments. This model predicts monomer conversion, number-average molecular weight, and polydispersity of molecular weight distribution. The effects of the concentrations of initiator, stable radical, and monomer, as well as the rate constants of initiation, propagation, termination, transfer, and the equilibrium constant between active and dormant species, are systematically investigated by using this model. It is shown that the ideal living-radical polymerization having a linear relationship between number-average molecular weight and conversion and a polydispersity close to unity is the result of fast initiation, slow propagation, absence of radical termination, and a high level of dormant species. Increasing stable radical concentration helps to reduce polydispersity but also decreases polymerization rate. Thermal initiation significantly broadens molecular weight distribution. Without the formation of dormant species, the model predicts a conventional free-radical polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2692–2704, 1999     

Diphenyldiselenide As Novel Non–salt Photoinitiator for Photosensitized Cationic Polymerization of N-Vinyl Carbazole

Photoinitiated cationic polymerization of N-vinyl carbazole (NVC) with diphenyldiselenide (DPDS) as an initiator and aromatic nitriles such as dicyanonaphthalene (DCN) and dicyanoanthracene (DCA) as sensitizer was studied at λ > 290 nm in CH₂Cl₂ solvent using single electron transfer (SET) reactions in this investigation. Aromatic nitriles were found to be effective photosensitizer in initiating polymerization at wavelength λ > 290 nm where DPDS (λ_max = 246 nm) do not absorb. However, the DPDS works well as an initiator with both DCN and DCA. An initiation mechanism is also proposed that involves the formation of selenium radical cation as actual initiating species. Upon photoirradiation, these radical cations are formed by single electron transfer between the excited singlet state sensitizer and the ground state of DPDS.     

Living diradical polymerization

A diradical initiator containing two thermoreversible bonds was prepared and used for the polymerization of styrene at 90°C. The monomer consumption and the variation of the molecular weight were monitored with time. The results show that the process can be considered as living and that the polymerization rate is independent of the radical initiator concentration. By elemental analysis of the chain ends it was concluded that the propagation reaction occurs at both ends.     

Homogeneous Solution Reverse Atom Transfer Radical Polymerization of Methyl Methacrylate

A homogeneous reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out in N, N-dimethylformamide(DMF) (25%, v/v) at 69°C, using an initiating system azobisisobutyronitrile (AIBN)/CuBr₂/N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA). The kinetics of homogeneous solution polymerizations showed linear first-order rate plots, indicating a constant number of growing species throughout the polymerization as well as a negligible contribution of termination or transfer reactions; a linear increase of the number-average molecular weight with conversion, and relatively low polydispersities, but low initiator efficiency. The dependence of the rate of polymerization on the concentrations of initiator, catalyst, ligand and temperature were presented.     

STABILIZED RADICALS AS INHIBITORS OF POLYMERIZATION—REACTIONS OF ALKOXYAMINES WITH GROWING POLYMER RADICALS

ABSTRACT

Stabilized nitroxide radicals (TEMPO and its 4-hydroxy- and 4-oxo-derivatives) have been examined as inhibitors of the radical polymerization at 60°C of methyl methacrylate using azobisisobutyronitrile as initiator. Inhibition periods have been recorded and also the rates of the subsequent polymerizations and the molecular weights of the resulting polymers. It is concluded that alkoxyamines, formed during the inhibition, affect the polymerizations and lead to lowering of the molecular weights of the resulting polymers. The effect is attributed to a radical-displacement process involving the alkoxyamine and a growing polymer radical.