Mesoporous silicas by self-assembly of lipid molecules: ribbon, hollow sphere, and chiral materials

Using lipids (N-acyl amino acids) and 3-aminopropyltriethoxysilane as structure- and co-structure-directing agents, mesoporous silicas with four different morphologies, that is, helical ribbon (HR), hollow sphere, circular disk, and helical hexagonal rod, were synthesized just by changing the synthesis temperature from 0 degrees C to 10, 15, or 20 degrees C. The structures were studied by electron microscopy. It was found that 1) the structures have double-layer disordered mesopores in the HR, radially oriented mesopores in the hollow sphere, and highly ordered straight and chiral 2D-hexagonal mesopores in the disklike structure and helical rod, respectively; 2) these four types of mesoporous silica were transformed from the flat bilayered lipid ribbon with a chain-interdigitated layer phase through a solid-solid transformation for HR formation and a dissolving procedure transformation for the synthesis of the hollow sphere, circular disk, and twisted morphologies; 3) the mesoporous silica helical ribbon was exclusively right-handed and the 2D-hexagonal chiral mesoporous silica was excessively left-handed when the L-form N-acyl amino acid was used as the lipid template; 4) the HR was formed only by the chiral lipid molecules, whereas the 2D-hexagonal chiral mesoporous silicas were formed by chiral, achiral, and racemic lipids. Our findings give important information for the understanding of the formation of chiral materials at the molecular level and will facilitate a more efficient and systematic approach to the generation of rationalized chiral libraries.     

Morphological and structural evolution of mesoporous silicas in a mild buffer solution and lysozyme adsorption

Mesoporous silicas with various morphologies and structures were synthesized with the aid of 2,2,4-trimethylpentane (TMP) in the presence of nonionic surfactant P123 [(EO)20(PO)70(EO)20] as a structure-directing agent under mild reaction conditions (HAc-NaAc buffer solution, pH 4.4). The ropelike particles formed by end-to-end interconnected nanorods were obtained at a TMP/P123 weight ratio of 0.5. It is noteworthy to mention that the mesoporous nanorods have channels running parallel to the short axis. The silica hollow spheres can be obtained at a higher TMP/P123 weight ratio because of the fusion of the primary nanorods around the interface of the O/W emulsion. Initial synthesis temperatures of 15, 25, and 40 degrees C can lead to mesoporous silicas with highly ordered 2D hexagonal mesostructure, vesicular mesostructure, and mesostructured cellular foams (MCF), respectively. The mesoporous silicas exhibit high adsorption capacity (up to 536 mg g(-1)) and very rapid (<5 min to reach equilibrium) lysozyme immobilization. More importantly, it is revealed that mesoporous silica hollow spheres with rugged surfaces can greatly accelerate the adsorption rate of the enzyme during the adsorption process.     

The formation of mesoporous TiO2 spheres via a facile chemical process

The mesoporous TiO(2) solid and hollow spheres have been synthesized via a controllable and simple chemical route. Structural characterization indicates that these TiO(2) mesoporous spheres after calcined at 500 degrees C have an obvious mesoporous structure with the diameters of 200-300 nm for solid spheres and 200-500 nm for hollow spheres. The average pore sizes and BET surface areas of the mesoporous TiO(2) solid and hollow spheres are 6.8, 7.0 nm and 162, 90 m(2)/g, respectively. Optical adsorption investigation shows that TiO(2) solid and hollow spheres possess a direct band gap structure with the optical band gap of 3.68 and 3.75 eV, respectively. A possible formation mechanism for TiO(2) solid and hollow spheres is discussed.     

Gemini Surfactants Templated Mesoporous Silica Microparticles: from Solid to Hollow Mesoporous Spheres

We synthesized a series of mesoporous silica microparticles (MSs) using cationic gemini surfactants C_14–2‐n (n = 2, 6, 10, 14) as templates. The porous structures and pore size of these MSs can be tuned by varying the length of alkyl chain in gemini surfactant templates. These MSs showed effective doxorubicin (DOX) loading and a pH‐responsive drug release characteristics. These results indicate that the MSs, especially the hollow mesoporous silica nanoparticles, have great potential for biomedical applications.     

Synthesis of morphology-controllable mesoporous Co3O4 and CeO2

Recently, extensive works have been devoted to the morphology control of mesoporous materials with respect to their use in various applications. In this paper, we used two kinds of mesoporous silica, SBA-15 rods and spheres as hard templates to synthesize morphology-controllable mesoporous metal oxides. By carefully controlling the loading of metal precursors in the mesopores of the hard template, mesoporous Co₃O₄ and CeO₂ with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were conveniently obtained. The structural properties of these materials were characterized by XRD, BET, SEM and TEM. In addition, it is found that the differences observed in the textural properties of the two mesoporous metal oxides nanocasted from the same template can be attributed to the properties of metal precursors and the interaction between metal oxide and SiO₂. Thus-obtained mesoporous metal oxides with such special morphologies may have a potential application in the field of environmental catalytic oxidation.     

Layer-by-Layer Motif Architectures: Programmed Electrochemical Syntheses of Multilayer Mesoporous Metallic Films with Uniformly Sized Pores

Although multilayer films have been extensively reported, most compositions have been limited to non-catalytically active materials (e.g. polymers, proteins, lipids, or nucleic acids). Herein, we report the preparation of binder-free multilayer metallic mesoporous films with sufficient accessibility for high electrocatalytic activity by using a programmed electrochemical strategy. By precisely tuning the deposition potential and duration, multilayer mesoporous architectures consisting of alternating mesoporous Pd layers and mesoporous PdPt layers with controlled layer thicknesses can be synthesized within a single electrolyte, containing polymeric micelles as soft templates. This novel architecture, combining the advantages of bimetallic alloys, multilayer architectures, and mesoporous structures, exhibits high electrocatalytic activity for both the methanol oxidation reaction (MOR) and the ethanol oxidation reaction (EOR).     

Layer‐by‐Layer Motif Architectures: Programmed Electrochemical Syntheses of Multilayer Mesoporous Metallic Films with Uniformly Sized Pores

Although multilayer films have been extensively reported, most compositions have been limited to non‐catalytically active materials (e.g. polymers, proteins, lipids, or nucleic acids). Herein, we report the preparation of binder‐free multilayer metallic mesoporous films with sufficient accessibility for high electrocatalytic activity by using a programmed electrochemical strategy. By precisely tuning the deposition potential and duration, multilayer mesoporous architectures consisting of alternating mesoporous Pd layers and mesoporous PdPt layers with controlled layer thicknesses can be synthesized within a single electrolyte, containing polymeric micelles as soft templates. This novel architecture, combining the advantages of bimetallic alloys, multilayer architectures, and mesoporous structures, exhibits high electrocatalytic activity for both the methanol oxidation reaction (MOR) and the ethanol oxidation reaction (EOR).     

嵌段共聚物与阳离子表面活性剂混合模板合成介孔SiO_2

利用三嵌段共聚物EO_(20)PO_(70)EO_(20)与阳离子表面活性剂CTAB作为混合 模板合成了内部孔结构与外观形貌同时受到调控的介孔氧化硅。与使用单一共聚物 模板制备的介孔氧化硅相比，在混合模板作用下得到的介孔氧化硅的孔结构有序度 降低，而孔径则随混合模板中共聚物的质量分数的降低而减小。在EO_(20)PO_(70) EO_(20)与CTAB质量比为1:1时可得到形貌完好、表面光滑的介孔氧化硅微米球，其 平均孔径为3.2nm，比表面积为972m~2/g。     

Flexible transparent conducting single-wall carbon nanotube film with network bridging method

Hollow ZrO(2) microspheres with mesoporous shells have been synthesized by a novel hydrothermal reaction of zirconium oxychloride in the presence of urea, hydrochloric acid, and ethanol. The morphology and shell thickness of the hollow microspheres can be controlled by varying synthesis conditions. After calcination at high temperature, the morphologies of the hollow microspheres are essentially preserved. Pt catalyst supported on the hollow calcined ZrO(2) microspheres exhibits more excellent catalytic performance in CO oxidation than those on ZrO(2) powders derived from conventional precipitation methods.     

Influence of mesoporosity on lithium-ion storage capacity and rate performance of nanostructured TiO2(B)

Here, we present the Li(+) insertion behavior of mesoporous ordered TiO(2)(B) nanoparticles (meso-TiO(2)(B)). Using presynthesized 4 nm TiO(2)(B) nanoparticles as building blocks and a commercially available ethylene glycol-propylene glycol block copolymer (P123) as a structure-directing agent, we were able to produce mesoporous structures of high-purity TiO(2)(B) with nanocrystallinity and mesopore channels ranging from 10 to 20 nm in diameter. We compared the Li(+) insertion properties of nontemplated TiO(2)(B) nanoparticles (nano-TiO(2)(B)) to meso-TiO(2)(B) via voltammetry and galvanostatic cycling and found significant increases in overall Li(+) insertion capacity for the latter. While nano-TiO(2)(B) and meso-TiO(2)(B) both show surface charging (pseudocapacitive) Li(+) insertion behavior, meso-TiO(2)(B) exhibits a higher overall capacity especially at high charge rates. We attribute this effect to higher electrode/electrolyte contact area as well as the improved electron and ion transport in meso-TiO(2)(B). In this study, we have demonstrated the influence of both nanostructuring and mesoporosity on Li(+) insertion behavior by rationally controlling the overall architecture of the TiO(2)(B) materials.     

Facile synthesis of monodisperse microspheres and gigantic hollow shells of mesoporous silica in mixed water-ethanol solvents

Mesoporous silica materials with a variety of morphologies, such as monodisperse microspheres, gigantic hollow structures comprising a thin shell with a hole, and gigantic hollow structures consisting of an outer thin shell and an inner layer composed of many small spheres, have been readily synthesized in mixed water-ethanol solvents at room temperature using cetyltrimethylammonium bromide (CTAB) as the template. The obtained mesoporous silica generally shows a disordered mesostructure with typical average pore sizes ranging from 3.1 to 3.8 nm. The effects of the water-to-ethanol volume ratio (r), the volume content of tetraethyl orthosilicate TEOS (x), and the CTAB concentration in the solution on the final morphology of the mesoporous silica products have been investigated. The growth process of gigantic hollow shells of mesoporous silica through templating emulsion droplets of TEOS in mixed water-ethanol solution has been monitored directly with optical microscopy. Generally, the morphology of mesoporous silica can be regulated from microspheres through gigantic hollow structures composed of small spheres to gigantic hollow structures with a thin shell by increasing the water-to-ethanol volume ratio, increasing the TEOS volume content, or decreasing the CTAB concentration. A plausible mechanism for the morphological regulation of mesoporous silica by adjusting various experimental parameters has been put forward by considering the existing state of the unhydrolyzed and partially hydrolyzed TEOS in the synthesis system.     

A General Route to Hollow Mesoporous Rare‐Earth Silicate Nanospheres as a Catalyst Support

Hollow mesoporous structures have recently aroused intense research interest owing to their unique structural features. Herein, an effective and precisely controlled synthesis of hollow rare‐earth silicate spheres with mesoporous shells is reported for the first time, produced by a simple hydrothermal method, using silica spheres as the silica precursors. The as‐prepared hollow rare‐earth silicate spheres have large specific surface area, high pore volume, and controllable structure parameters. The results demonstrate that the selection of the chelating reagent plays critical roles in forming the hollow mesoporous structures. In addition, a simple and low‐energy‐consuming approach to synthesize highly stable and dispersive gold nanoparticle–yttrium silicate (AuNPs/YSiO) hollow nanocomposites has also been developed. The reduction of 4‐nitrophenol with AuNPs/YSiO hollow nanocomposites as the catalyst has clearly demonstrated that the hollow rare‐earth silicate spheres are good carriers for Au nanoparticles. This strategy can be extended as a general approach to prepare multifunctional yolk–shell structures with diverse compositions and morphologies simply by replacing silica spheres with silica‐coated nanocomposites.     

Basic amino acid assisted‐fabrication of rectangular nanotube,circular nanotube,and hollow microsphere of polyaniline: Adjusting and controlling effect of pH value

This work reports a simple and effective method to prepare polyaniline (PANI) nanotubes with rectangular or circular cross section and hollow microspheres by using basic amino acids L ‐lysine or L ‐arginine as dopants and pH buffer agents, respectively. The research reveals that the pH value of the reaction solution at the beginning stage is a crucial factor to form PANI microstructures. The L ‐lysine and L ‐arginine have isoelectric point 9.74 and 10.76, which can maintain reaction solution at high pH value at the beginning reaction and assist aniline to couple in ortho‐position forming phenazine unit in the oligomer chain. The oligomer produces rectangular nanorods or microspheres by interaction. These oligomer microstructures act as templates for further polymerization to form PANI rectangular nanotubes and hollow microspheres. Decreasing the concentration of the basic amino acid or using acidic amino acid, the round nanotubes are formed. This method provides a simple route to prepare PANI microstructures with different morphologies without any foreign template or surfactant, and raises a new view on the polymerization process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

同轴静电纺丝法在纳米中空Ti02纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶,钛酸四正丁酯和PVP溶胶,银颗粒为前驱体,以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维.将双组分纤维在200℃下热处理去除乙醇与表面吸附水后,继而在空气气氛中焙烧至600℃.可以得到在内表面上沉积银颗粒的TiO2纳米管,银颗粒的直径为5-40 nm,TiO2纳米管的外径150-300 nm.管臂厚10-20 nm.用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征.中空纤维的直径和管壁可以通过改变电纺参数来调节.与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较,Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

单分散中空介孔结构的盐模板合成及形貌调控

中空介孔结构因具有丰富的内部空间以及多孔渗透性外壳等优势,在催化、能源储存与转化及生物医药等领域得到了广泛应用.然而,目前仍然缺少高效、简便且绿色的合成中空介孔结构的方法.本文以柠檬酸钠胶体颗粒作为模板,通过十六烷基三甲基溴化氨(Cetyltrimethylammonium bromide, CTAB)胶束与正硅酸四乙酯(Tetraethyl orthosilicate, TEOS)的水解低聚物在胶体颗粒表面进行界面共组装,直接生长介孔二氧化硅壳层;然后通过简便的醇洗和水洗分别除去CTAB胶束和柠檬酸钠胶体颗粒后,得到中空介孔结构.进一步研究表明,负电荷的柠檬酸钠胶体颗粒与CTAB胶束之间的静电相互作用是诱导氧化硅低聚物在颗粒表面进行交联组装的关键.基于此,通过控制生长时间实现了对中空介孔结构形貌和壳层厚度的精确调控.所得中空介孔二氧化硅纳米球可以显著增强物质的扩散传输,是理想的催化剂载体,负载金纳米颗粒后可以高效催化4-硝基苯酚的还原反应.研究结果为中空介孔材料的绿色简便合成提供了思路.     

以氨基酸为晶体生长控制剂合成多级纳米结构的硫化铟空心微球

以水热方法制备具有多级纳米结构的In2S3空心微球. 通过对不同反应时间产物的跟踪表征, 证明微球中空结构的形成归因于Ostwald ripening机理. 空心微球的壳层由In2S3的纳米粒子或纳米片组成, In2S3空心球的紫外可见光谱蓝移以及荧光光谱在约385 nm的强发射和364 nm的弱发射, 均显示了纳米尺度In2S3晶体的量子局限效应. 以不同的氨基酸作为晶体生长修饰剂, 可以选择性地制备不同表面形貌的In2S3空心微球, 显示了氨基酸的不同功能团在In2S3晶体生长过程中对表面形貌的控制作用.     

One-step fabrication and high photocatalytic activity of porous TiO2 hollow aggregates by using a low-temperature hydrothermal method without templates

Porous TiO2 hollow aggregates have been synthesized on a large scale by means of a simple hydrothermal method without using any templates. The as-prepared products were characterized by means of field emission scanning electron microscopy, XRD, TEM, nitrogen adsorption, UV/Vis diffuse reflectance spectroscopy, and FTIR spectroscopy. The photocatalytic activity of the aggregates was demonstrated through the photocatalytic degradation of Rhodamine B. Structural characterization indicates that the porous TiO2 aggregates are 500-800 nm in diameter and display mesoporous structure. The average pore sizes and BET surface areas of the aggregates are 12 nm and 168 m2 g-1, respectively. Optical adsorption investigations show that the aggregates possess an optical band-gap energy of 3.36 eV. The as-prepared products were substantially more effective photocatalysts than the commercially available photocatalyst P25. The dye degradation rate of the porous TiO2 hollow aggregates is more than twice that of P25. The high photoactivities of the aggregates can be attributed to the combined effects of several factors, namely, large surface areas, the existence of mesopores, and the high band-gap energy. In addition, the as-prepared products can be easily recycled.     

Colloidal chemical approaches to inorganic micro- and nanostructures with controlled morphologies and patterns

The controlled synthesis of inorganic micro- and nanostructures with tailored morphologies and patterns has attracted intensive interest because the properties and performances of micro- and nanostructured materials are largely dependent on the shape and structure of the primary building blocks and the way in which the building blocks are assembled or integrated. This review summarizes the recent advances on the solution-phase synthesis of inorganic micro- and nanostructures with controlled morphologies and patterns via three typical colloidal chemical routes, i.e., synthesis based on catanionic micelles, reactive templates, and colloidal crystal templates, with focus on the approaches developed in our lab. Firstly, catanionic micelles formed by mixed cationic/anionic surfactants are used as effective reaction media for the shape-controlled synthesis of inorganic nanocrystals and the solution growth of hierarchical superstructures assembled by one-dimensional (1D) nanostructures. Secondly, reactive template-directed chemical transformation strategy provides a simple and versatile route to fabricate both hollow structures and 1D nanostructures. Thirdly, colloidal crystals are employed as very effective templates for the facile solution-phase synthesis of novel inorganic structures with controlled patterns, such as three-dimensionally (3D) ordered macroporous materials and two-dimensionally (2D) patterned nanoarrays and nanonets. Finally, a brief outlook on the future development in this area is presented.     

高活性Ag修饰TiO2空心八面体光催化剂的简易模板诱导合成

贵金属修饰的TiO2空心纳米光催化材料由于具有大的比表面积、低的质量密度、良好的表面渗透性、强的光吸收能力以及界面电荷的快速转移,因而表现出优异的光催化性能.为了制备结构可控且精良的贵金属修饰TiO2空心纳米光催化材料,人们先后采用湿化学法、高温固相法、声化学法及光化学沉积法等.由于在制备过程中涉及多种异相材料的合成和结构控制,因此上述合成方法通常需要复杂且多步过程(有些过程甚至很容易导致结构破坏),从而限制了其在光催化领域的实际应用.本文开发了一种简单的模板诱导法,成功制备了Ag纳米粒子修饰的TiO2空心八面体光催化剂.合成过程包括模板指导沉积和原位模板溶解.以Ag2O八面体为模板, TiF4水溶液为前驱体,首先通过TiF4水解形成TiO2纳米粒子沉积在Ag2O模板表面,而TiF4水解产生的酸性HF水溶液可原位溶解碱性的Ag2O模板,从而一步制得TiO2空心八面体.同时,利用Ag2O以及Ag+离子的光敏特性,在光照条件下使Ag2O和Ag+离子生成Ag纳米颗粒,直接沉积在TiO2空心八面体的内外表面,得到Ag/TiO2光催化剂.由此可见,该合成方法具有明显的步骤少的优点.扫描电镜、透射电镜、能量散射和紫外-可见光谱等表征结果表明成功制得内外Ag纳米粒子修饰的TiO2空心八面体光催化剂,其中TiO2空心八面体的壁厚约为25 nm,边长约为1μm,而修饰在其表面的Ag纳米粒子尺寸仅为5–10 nm.此外,通过控制TiF4前驱体浓度,还可制备核壳结构的Ag2O@TiO2八面体以及不同壁厚Ag修饰的TiO2空心八面体,表明该方法在Ag/TiO2形貌合成上的多样性和可控性.为了获得良好的光催化活性,对制备的Ag纳米粒子修饰的TiO2空心八面体光催化剂进行了不同温度的热处理. X射线衍射结果表明,即使在600 oC高温下,制备的Ag/TiO2空心八面体光催化剂依然能够保持原有的特殊形貌和锐钛矿TiO2晶型.该温度明显高于TiO2从锐钛矿向金红石转变的温度.这说明合成的Ag/TiO2能在保持高活性锐钛矿相的同时获得更好的结晶性.这可能是由于分散在TiO2原始晶粒周围的Ag纳米粒子能阻止其进一步长大,从而抑制了其晶型转变.不同样品光催化降解甲基橙的结果表明,经600oC高温热处理的样品表现出最高的光催化活性,相应的反应速率常数为0.11 min？1.这应得益于该光催化剂具有以下三个特点：(1) TiO2空心八面体的薄壁结构能够缩短光照条件下光生电子和空穴从内部扩散到表面的距离;(2)由于贵金属Ag纳米粒子沉积在TiO2薄壁的内外两个表面以及TiO2和Ag形成肖脱基势垒,因此在它们接触的界面上能够发生更快的界面电荷转移;(3)高温处理导致TiO2良好的晶化以及高活性锐钛矿TiO2晶型的保持.     

Hollow titania spheres with movable silica spheres inside

We demonstrate a flexible method for preparing hollow TiO2 nanospheres with movable silica nanoparticles inside (HTNMSNs). In this method, we used monodisperse silica--polystyrene core--shell nanospheres (SiO2-PS-CSNs) sulfonated as templates and prepared the composite shell consisting of TiO2 and sulfonated polystyrene (SPS) through adsorbing or depositing tetrabutyl titanate gel into the SPS shell. Finally the HTNMSNs were obtained after removal of all polymers in the composite nanospheres by dissolution or calcinations. We investigated the dependence of the morphologies of HTNMSNs on the thickness of PS shells and the size of SiO2 cores and prepared rare earth doped HTNMSNs by a sol-gel process.