Bridging the gap between homogeneous and heterogeneous catalysis: ortho/para H(2) conversion, hydrogen isotope scrambling, and hydrogenation of olefins by Ir(CO)Cl(PPh(3))(2)

Some transition metal complexes are known to catalyze ortho/para hydrogen conversion, hydrogen isotope scrambling, and hydrogenation reactions in liquid solution. Using the example of Vaska's complex, we present here evidence by NMR that the solvent is not necessary for these reactions to occur. Thus, solid frozen solutions or polycrystalline powdered samples of homogeneous catalysts may become heterogeneous catalysts. Comparative liquid- and solid-state studies provide novel insight into the reaction mechanisms.     

全固态电池界面的研究进展

Owing to the serious energy crisis and environmental problems caused by fossil energy consumption, development of high-energy-density batteries is becoming increasingly significant to satisfy the rapidly growing social demands. Lithium-ion batteries have received widespread attention because of their high energy densities and environmental friendliness. At present, they are widely used in portable electronic devices and electric vehicles. However, security aspects need to be addressed urgently. Substantial advances in liquid electrolyte-based lithium-ion batteries have become a performance bottleneck in the recent years. Traditional lithium-ion batteries use organic liquids as electrolytes, but the flammability and corrosion of these electrolytes considerably limit their development. Continuous growth of lithium dendrites can pierce the separator, leading to electrolyte leakage and combustion, which is a serious safety hazard. Replacement of organic electrolytes with solid-state electrolytes is one of the promising solutions for the development of next-generation energy storage devices, because they have high energy densities and are safe. Solid electrolytes can remarkably alleviate the safety hazards involved in the use of traditional liquid-based lithium-ion batteries. In addition, the composite of solid-state electrolytes and lithium metal is expected to result in a higher energy density. However, due to the lack of fluidity of the solid electrolytes, problems such as limited solid-solid contact area and increased impedance at the interface when solid-state electrolytes are in contact with electrodes must be solved. The localized and buried interface is a major drawback that restricts the electrochemical performance and practical applications of the solid-state batteries. Fabrication of a stable interface between the electrodes and solid-state electrolyte is the main challenge in the development of solid-state lithium metal batteries. All these aspects are critical to the electrochemical performance and safety of the solid-state batteries. Current research mainly focuses on addressing the problems related to the solid-solid interface in solid-state batteries and improving the electrochemical performance of such batteries. In this review, we comprehensively summarize the challenges in the fabrication of solid-state batteries, including poor chemical and electrochemical compatibilities and mechanical instability. Research progress on the improvement strategies for interface problems and the advanced characterization methods for the interface problems are discussed in detail. Meanwhile, we also propose a prospect for the future development of solid-state batteries to guide the rational designing of next-generation high-energy solid-state batteries. There are many critical problems in solid-state batteries that must be fully understood. With further research, all-solid-state batteries are expected to replace the traditional liquid-based lithium-ion batteries and become an important system for a safe and reliable energy storage.     

Liquid-Free All-Solid-State Zinc Batteries and Encapsulation-Free Flexible Batteries Enabled by In Situ Constructed Polymer Electrolyte

Zn batteries are usually considered as safe aqueous systems that are promising for flexible batteries. On the other hand, any liquids, including water, being encapsulated in a deformable battery may result in problems. Developing completely liquid-free all-solid-state Zn batteries needs high-quality solid-state electrolytes (SSEs). Herein, we demonstrate in situ polymerized amorphous solid poly(1,3-dioxolane) electrolytes, which show high Zn ion conductivity of 19.6 mS cm⁻¹ at room temperature, low interfacial impedance, highly reversible Zn plating/stripping over 1800 h cycles, uniform and dendrite-free Zn deposition, and non-dry properties. The in-plane interdigital-structure device with the electrolyte completely exposed to the open atmosphere can be operated stably for over 30 days almost without weight loss or electrochemical performance decay. Furthermore, the sandwich-structure device can normally operate over 40 min under exposure to fire. Meanwhile, the interfacial impedance and the capacity using in situ-formed solid polymer electrolytes (SPEs) remain almost unchanged after various bending tests, a key criterion for flexible/wearable devices. Our study demonstrates an approach for SSEs that fulfill the requirement of no liquid and mechanical robustness for practical solid-state Zn batteries.     

Improving carbon dioxide solubility in ionic liquids

Previously we showed that CO2 could be used to extract organic molecules from ionic liquids without contamination of the ionic liquid. Consequently a number of other groups demonstrated that ionic liquid/CO2 biphasic systems could be used for homogeneously catalyzed reactions. Large differences in the solubility of various gases in ionic liquids present the possibility of using them for gas separations. More recently we and others have shown that the presence of CO2 increases the solubility of other gases that are poorly soluble in the ionic liquid phase. Therefore, a knowledge and understanding of the phase behavior of these ionic liquid/CO2 systems is important. With the aim of finding ionic liquids that improve CO2 solubility and gaining more information to help us understand how to design CO2-philic ionic liquids, we present the low- and high-pressure measurements of CO2 solubility in a range of ionic liquids possessing structures likely to increase the solubility of CO2. We examined the CO2 solubility in a number of ionic liquids with systematic increases in fluorination. We also studied nonfluorinated ionic liquids that have structural features known to improve CO2 solubility in other compounds such as polymers, for example, carbonyl groups and long alkyl chains with branching or ether linkages. Results show that ionic liquids containing increased fluoroalkyl chains on either the cation or anion do improve CO2 solubility when compared to less fluorinated ionic liquids previously studied. It was also found that it was possible to obtain similar, high levels of CO2 solubility in nonfluorous ionic liquids. In agreement with our previous results, we found that the anion frequently plays a key role in determining CO2 solubility in ionic liquids.     

Optimal control design of NMR and dynamic nuclear polarization experiments using monotonically convergent algorithms

Optimal control theory has recently been introduced to nuclear magnetic resonance (NMR) spectroscopy as a means to systematically design and optimize pulse sequences for liquid- and solid-state applications. This has so far primarily involved numerical optimization using gradient-based methods, which allow for the optimization of a large number of pulse sequence parameters in a concerted way to maximize the efficiency of transfer between given spin states or shape the nuclear spin Hamiltonian to a particular form, both within a given period of time. Using such tools, a variety of new pulse sequences with improved performance have been developed, and the NMR spin engineers have been challenged to consider alternative routes for analytical experiment design to meet similar performance. In addition, it has lead to increasing demands to the numerical procedures used in the optimization process in terms of computational speed and fast convergence. With the latter aspect in mind, here we introduce an alternative approach to numerical experiment design based on the Krotov formulation of optimal control theory. For practical reasons, the overall radio frequency power delivered to the sample should be minimized to facilitate experimental implementation and avoid excessive sample heating. The presented algorithm makes explicit use of this requirement and iteratively solves the stationary conditions making sure that the maximum of the objective is reached. It is shown that this method is faster per iteration and takes different paths within a control space than gradient-based methods. In the present work, the Krotov approach is demonstrated by the optimization of NMR and dynamic nuclear polarization experiments for various spin systems and using different constraints with respect to radio frequency and microwave power consumption.     

Application of ionic liquids to the electrodeposition of metals

The electrodeposition of most of technologically important metals has been shown to be possible from a wide range of room temperature molten salts, more commonly known today as 'ionic liquids'. These liquids are currently under intense scrutiny for a wide variety of applications some of which have already been commercialized. Despite the fact that electrodeposition was the first application studied in these liquids no metal deposition processes have as yet been developed to an industrial scale. This review addresses the practical and theoretical aspects that need to be considered when choosing ionic liquids for metal deposition. It details the current understanding of the physical and chemical properties of these interesting fluids and highlights the areas that need to be considered to develop practical electroplating systems. The effect of composition and temperature on viscosity and conductivity are discussed together with the fundamental approaches required to synthesise new liquids.     

Predicting the wetting dynamics of a two-liquid system

We propose a new theoretical model of dynamic wetting for systems comprising two immiscible liquids, in which one liquid displaces another from the surface of a solid. Such systems are important in many industrial processes and the natural world. The new model is an extension of the molecular-kinetic theory of wetting and offers a way to predict the dynamics of a two-liquid system from the individual wetting dynamics of its parent liquids. We also present the results of large-scale molecular dynamics simulations for one- and two-liquid systems and show them to be in good agreement with the new model. Finally, we show that the new model is consistent with the limited data currently available from experiment.     

Designing solid-state interfaces on lithium-metal anodes: a review

Li-metal anodes are one of the most promising energy storage systems that can considerably exceed the current technology to meet the ever-increasing demand of power applications. The apparent cycling performances and dendrite challenges of Li-metal anodes are highly influenced by the interface layer on the Li-metal anode because the intrinsic high reactivity of metallic Li results in an inevitable solid-state interface layer between the Li-metal and electrolytes. In this review, we summarize the recent progress on the interfacial chemistry regarding the interactions between electrolytes and ion migration through dynamic interfaces. The critical factors that affect the interface formation for constructing a stable interface with a low resistance are reviewed. Moreover, we review emerging strategies for rationally designing multiple-structured solid-state electrolytes and their interfaces, including the interfacial properties within hybrid electrolytes and the solid electrolyte/electrode interface. Finally, we present scientific issues and perspectives associated with Li-metal anode interfaces toward a practical Li-metal battery.     

Sol–Gel Encapsulation of Molecules to Generate Functional Optical Materials: A Molecular Programming Approach

The extraordinary opportunities offered by integrating solution chemistry of molecular entities with the solid-state nature of the gel provide the basis for designing a number of novel molecular materials. Herein, we present a strategy based on encapsulation of suitable response active species to impart useful optical properties to sol–gel glasses. The basic concept of this molecular programming approach is based on deliberate incorporation of response-active species in the silica gel framework to elicit specific optical responses. Design of molecular materials for device applications depends on selection of molecules which exhibit well-defined electronic or optical response, and assembly of these molecular components into a geometric structure that retains the rigidity, addressability, and stability necessary for practical applications. The approach is based on using molecules as active species and sol–gel glass as structural matrix in which the molecules are selectively integrated. A designer approach that employs specific molecules for generating optical signals is described. As such the properties of these silica-based glasses can be tuned by varying the composition of encapsulated species. These modified glasses exhibit substantially altered optical properties as compared to pristine silica sol–gels. The optical response of these materials provide initial examples toward designing novel materials whose optical and/or photonic responses can be modulated by structural integration of specific dopant entities.     

ESR spin probes in ionic liquids.

The spin probes 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL), and 2,2,6,6-tetramethyl-4-trimethylammoniumpiperidine-1-oxylIodide (CAT-1) are examined in a number of ionic liquids based on substituted imidazolium cations and tetrafluoroborate and hexafluorophosphate anions, respectively. The reorientation correlation times tau(R) of the spin probes in these systems have been determined by complete spectra simulation and, for rapid reortientation, by analysis of the intensities of the hyperfine lines of the electron spin resonance (ESR) spectra. A comparison of the results with those from the model system glycerol/water and selected organic solvents is made. Additions of diamagnetic and paramagnetic ions allow the conclusion that salt effects and spin exchange are present, and that both are superimposed by motional effects. Specific interactions in the ionic liquids, as well as between the spin-probe molecules and the constituents of the ionic liquids are reflected in the spectra of the spin probes, depending on their molecular structure.     

The influence of hydrogen bonding on the physical properties of ionic liquids

Potential applications of ionic liquids depend on the properties of this class of liquid material. To a large extent the structure and properties of these Coulomb systems are determined by the intermolecular interactions among anions and cations. In particular the subtle balance between Coulomb forces, hydrogen bonds and dispersion forces is of great importance for the understanding of ionic liquids. The purpose of the present paper is to answer three questions: Do hydrogen bonds exist in these Coulomb fluids? To what extent do hydrogen bonds contribute to the overall interaction between anions and cations? And finally, are hydrogen bonds important for the physical properties of ionic liquids? All these questions are addressed by using a suitable combination of experimental and theoretical methods including newly synthesized imidazolium-based ionic liquids, far infrared spectroscopy, terahertz spectroscopy, DFT calculations, differential scanning calorimetry (DSC), viscometry and quartz-crystal-microbalance measurements. The key statement is that although ionic liquids consist solely of anions and cations and Coulomb forces are the dominating interaction, local and directional interaction such as hydrogen bonding has significant influence on the structure and properties of ionic liquids. This is demonstrated for the case of melting points, viscosities and enthalpies of vaporization. As a consequence, a variety of important properties can be tuned towards a larger working temperature range, finally expanding the range of potential applications.     

Solvent Effects on the NMR Chemical Shifts of Imidazolium-Based Ionic Liquids and Cellulose Therein

The interactions of ionic liquids (IL) with solvents usually used in liquid-state nuclear magnetic resonance (NMR) spectroscopy are studied. The ¹H- and ¹³C-NMR chemical shift values of 1-n-butyl-3-methyl (BM)- and 1-ethyl-3-methyl (EM)-substituted imidazolium (IM) -chlorides (Cl) and -acetates (Ac) are determined before and after diluting with deuterated solvents (DMSO-d₆, D₂O, CD₃OD, and CDCl₃). The dilution offers structural modifications of the IL due to the solvents capacity to ionization. For further investigation of highly viscous cellulose dopes made of imidazolium-based IL, solid-state NMR spectroscopy enables the reproducibility of liquid-state NMR data of pure IL. The correlation of liquid- and solid-state NMR is shown on EMIM-Ac and cellulose/EMIM-Ac dope (10 wt %).     

Critical assessment of electron spin resonance studies on Cu(I)-NO complexes in Cu-ZSM-5 zeolites prepared by solid- and liquid-state ion exchange

Cu(I)-NO adsorption complexes were formed over Cu-ZSM-5 zeolites prepared by (i) solid-state ion exchange of NH(4)-ZSM-5 with CuCl and (ii) liquid-state ion exchange of ZSM-5 with Cu(CH(3)COO)(2). Electron spin resonance spectroscopy revealed the formation of two different Cu(I)-NO species A and B in both systems, whose spin Hamiltonian parameters are comparable with those already reported for the Cu(I)-NO species formed over 66% Cu(II) liquid-state ion-exchanged Cu-ZSM-5 materials. The population of the species A and B differs for the two systems studied. Formation of species B is more favored in the solid-state ion-exchanged Cu-ZSM-5 when compared to the liquid-state exchanged zeolite. The X-, Q- and W-band electron spin resonance spectra recorded at 6 and 77 K reveal the presence of a rigid geometry of the adsorption complexes at 6 K and a dynamic complex structure at higher temperatures such as 77 K. This is indicated by the change in the spin Hamiltonian parameters of the formed Cu(I)-NO species in both the liquid- and solid-state ion-exchanged Cu-ZSM-5 zeolites from 6 to 77 K. Possible models for the motional effects found at elevated temperatures are discussed. The temperature dependence of the electron spin phase memory time measured by two-pulse electron spin-echo experiments indicates, likewise, the onset of a motional process of the adsorbed NO molecules at temperatures above 10 K. The studies support previous assignments where the NO complexes are formed at two different Cu(I) cationic sites in the ZSM-5 framework and highlight that multifrequency electron spin resonance experiments at low temperatures are essential for reliable determination of the spin Hamiltonian parameters of the formed adsorption complexes for further comparison with Cu(I)-NO complex structures predicted by quantum chemical calculations.     

Photonic crystals--a step towards integrated circuits for photonics.

The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand.     

Nanomanipulation using near field photonics

In this article we review the use of near-field photonics for trapping, transport and handling of nanomaterials. While the advantages of traditional optical tweezing are well known at the microscale, direct application of these techniques to the handling of nanoscale materials has proven difficult due to unfavourable scaling of the fundamental physics. Recently a number of research groups have demonstrated how the evanescent fields surrounding photonic structures like photonic waveguides, optical resonators, and plasmonic nanoparticles can be used to greatly enhance optical forces. Here, we introduce some of the most common implementations of these techniques, focusing on those which have relevance to microfluidic or optofluidic applications. Since the field is still relatively nascent, we spend much of the article laying out the fundamental and practical advantages that near field optical manipulation offers over both traditional optical tweezing and other particle handling techniques. In addition we highlight three application areas where these techniques namely could be of interest to the lab-on-a-chip community, namely: single molecule analysis, nanoassembly, and optical chromatography.     

Three-dimensional multihelical microfluidic mixers for rapid mixing of liquids

Rapid mixing of liquids is important for most microfluidic applications. However, mixing is slow in conventional micromixers, because, in the absence of turbulence, mixing here occurs by molecular diffusion. Recent experiments show that mixing can be enhanced by generating transient flow resulting in chaotic advection. While these are planar microchannels, here we show that three-dimensional orientations of fluidic vessels and channels can enhance significantly mixing of liquids. In particular, we present a novel, multihelical microchannel system built in soft gels, for which the helix angle, helix radius, axial length, and even the asymmetry of the channel cross section are easily tailored to achieve the desired mixing. Mixing efficiency increases with helix angle and asymmetry of channel cross section, which leads to orders of magnitude reduction in mixing length over conventional mixers. This new scheme of generating 3D microchannels will help in miniaturization of devices, process intensification, and generation of multifunctional process units for microfluidic applications.     

Advances in Photonic Devices Based on Optical Phase-Change Materials

Phase-change materials (PCMs) are important photonic materials that have the advantages of a rapid and reversible phase change, a great difference in the optical properties between the crystalline and amorphous states, scalability, and nonvolatility. With the constant development in the PCM platform and integration of multiple material platforms, more and more reconfigurable photonic devices and their dynamic regulation have been theoretically proposed and experimentally demonstrated, showing the great potential of PCMs in integrated photonic chips. Here, we review the recent developments in PCMs and discuss their potential for photonic devices. A universal overview of the mechanism of the phase transition and models of PCMs is presented. PCMs have injected new life into on-chip photonic integrated circuits, which generally contain an optical switch, an optical logical gate, and an optical modulator. Photonic neural networks based on PCMs are another interesting application of PCMs. Finally, the future development prospects and problems that need to be solved are discussed. PCMs are likely to have wide applications in future intelligent photonic systems.     

Organogels as scaffolds for excitation energy transfer and light harvesting

The elegance and efficiency by which Nature harvests solar energy has been a source of inspiration for chemists to mimic such process with synthetic molecular and supramolecular systems. The insights gained over the years from these studies have contributed immensely to the development of advanced materials useful for organic based electronic and photonic devices. Energy transfer, being a key process in many of these devices, has been extensively studied in recent years. A major requirement for efficient energy transfer process is the proper arrangement of donors and acceptors in a few nanometers in length scale. A practical approach to this is the controlled self-assembly and gelation of chromophore based molecular systems. The present tutorial review describes the recent developments in the design of chromophore based organogels and their use as supramolecular scaffolds for excitation energy transfer studies.     

Influence of the displacement out of the center of mass and nonaxiality of the dipole on the thermodynamics of liquids composed of linear dipole molecules

We present results for organic liquids modeled as linear rods with an embedded point dipole shifted from the geometrical center. Previously, we have obtained results for the vapor-liquid equilibrium (VLE) of similar systems with centered point dipoles. Our results included both models and applications to real systems. Results presented here are based on a previous work ( Phys. Rev. E 2003, 68, 021201) on the structural properties of these systems where relevant results about the appearance of dimers were found. Now, we have also performed systematic simulations on these systems to calculate the VLE of models with different aspect ratios, dipole shifts, and dipole strengths using the Gibbs ensemble Monte Carlo (GEMC) to calculate equilibrium densities and vapor pressure at each temperature. The applications considered here include some important substances such as 1-amines, acetonitrile, and 1-alcohols whose intermolecular parameters were fitted from our model simulations. Furthermore, we have used quantum chemistry calculations to obtain a reliable charge distribution, and we have applied our model to predict the vapor pressure of alpha,omega-diols where experimental results are rather scarce. Our results show a general improvement of the agreement between experiment and models compared to centered dipole models previously used. Results for amines are particularly remarkable.