基于半导体光放大器和受激布里渊散射的全光非归零码时钟提取

利用半导体光放大器(SOA)的增益饱和特性、自相位调制(SPM)效应和啁啾光纤光栅(CFBG)的滤波和啁啾特性共同作用实现了10 Gbit/s非归零码(NRZ)信号的时钟分量增强。经过该结构的非归零光谱的时钟分量增强后,其时钟数据抑制比提高了12.9 dB。时钟分量增强后的信号经基于受激布里渊效应(SBS)的时钟提取结构后实现了对非归零信号的全光时钟提取。这种新型非归零全光时钟提取结构具有对数据速率及数据格式透明,低抖动,不受码型效应的影响等优点。     

基于UNI开关的40 GHz注入锁模全光时钟提取实验

基于超快非线性干涉仪UNI开关具有超过40 Gbit/s的开关速度,提出一种在锁模环形腔内利用UNI开关进行时钟提取的新方案.按此方案进行实验,对40 Gbit/s伪随机信号进行时钟提取,得到了清晰稳定的时钟脉冲.与利用SOA的交叉增益调制注入锁模时钟提取方案相比,在此方案中注入到SOA的信号功率仅0.5 dBm,降低了7 dB左右,对SOA的运行更安全.     

等幅均匀复用OTDM信号的单路和群路时钟提取

提出了针对等幅均匀复用的光时分复用信号进行全光时钟提取的一种新方案,理论上分析了该方案的可行性,并给出了各次谐波时钟频率分量大小的表达式.实验上利用该方案成功地从等幅均匀复用的8×2.5 GHz信号中提取出了2.5 GHz单路时钟和20 GHz群路时钟光脉冲.此技术可应用于高速OTDM信号的时钟提取.     

Novel scheme of clock recovery for high-speed OTDM signals based on stimulated Brillouin scattering

A new but simply implemented optical clock recovery scheme for optical time-division multiplexing （OTDM） systems based on stimulated BriUouin scattering （SBS） effect is presented and demonstrated experimentally. According to the unequal-amplitude even-multiplexed OTDM signals, the frame clock is extracted. In addition, the clock with multiple tributary rates is recovered from 160-Gb/s OTDM signal in simulation by utilizing the clock recovery module.     

Investigation of multiwavelength clock recovery based on heterodyne beats of sideband-filtered signal

We investigate a new parallel all-optical clock recovery scheme based on heterodyne beats of an optical sideband-filtered signal. The oscillating clock signal is recovered when the filtered sideband is combined with a stable local oscillator. The filtering is performed with an optical resonator, which by nature provides possibility for multiwavelength operation. The local oscillator could be realized by a multiwavelength laser, whose emission wavelengths are injection seeded with carrier wavelengths of the input data. The output signal of such a configuration benefits from a reduced bit-pattern effect and a stable offset level. The sideband filtering is demonstrated for 23 simultaneous channels at 100 GHz DWDM grid, each hosting a data stream of 10 Gbit/s.     

All-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity

A novel scheme for all-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity is proposed and investigated numerically. The results show, for a 2.5 GHz driving pulse train, it can be generated 5-25 GHz repetition rate pulse trains with low clock amplitude jitter, polarization independence and high peak power. Furthermore, the extraction of the clock signal from a pseudorandom bit sequence signal can be realized based on the proposed scheme.     

40 Gb/s信号全光3R再生实验

提出一种新型40 Gb/s全光3R再生器方案。采用高精细度法布里-珀罗滤波器进行时钟提取。时钟提取前,通过高稳定光源对输入信号光波长变换实现信号光波长和法布里-珀罗滤波器梳状窗口对准;时钟提取后,接半导体光放大器(SOA)进一步消除时钟信号噪声。全光判决中,采用双半导体光放大器串联增大非线性性能,提高了判决门的响应速度。判决输出接窄带滤波器去除脉冲啁啾拖尾,减小码型效应。实验中,恶化40 Gb/s光脉冲信号通过全光3R再生器可以得到再生脉冲。输入恶化信号时间抖动大于5 ps,脉冲宽度大于16 ps,再生得到的信号时间抖动小于1.5 ps。再生信号相对于输入信噪比改善14 dB。连续稳定工作记录大于15 h。通过实验验证,这种全光3R再生器方案成功地实现了40 Gb/s信号的再生。     

光时分复用系统中单路时钟的提取

提出利用复用信号的时候不均匀性,采用主动光纤锁模激光器,直接从复用后的信号中提取出复用前的时钟光脉冲。考虑到电的时分复用与光的时分复用在机理上的一致性,故初步复用时分复用信号进行实验,成功地从时分复用信号中得到了复用前的时钟光脉冲。此处电的时分复用所得的结论适用于光的时分复用。     

All-optical clock recovery from 10-Gb/s NRZ data and NRZ to RZ format conversion

A non-return-to-zero (NRZ) to pseudo-return-to-zero (PRZ) converter consisting of a semiconductor optical amplifier (SOA) and an arrayed waveguide grating (AWG) is proposed, by which the enhancement of clock frequency component and clock-to-data suppression ratio of the NRZ data are evidently achieved. Alloptical clock recovery from NRZ data at 10 Gb/s is successfully demonstrated with the proposed NRZ-to-PRZ converter and a mode-locked SOA fiber laser. Furthermore, NRZ-to-RZ format conversion of 10 Gb/s is realized by using the recovered clock as the control light of terahertz optical asymmetric demultiplexer(TOAD), which further proves that the proposed clock recovery scheme is applicable.     

基于折叠式超快非线性干涉仪的全光码型转换理论和实验研究

码型转换是实现非归零(NRZ)信号全光时钟恢复的关键技术.提出了一种基于折叠式超快非线性干涉仪的全光NRZ到伪归零(PRZ)信号转换的新型方案.基于半导体光放大器的分段模型和超快非线性干涉仪的传输函数，建立了该方案的理论分析模型，数值模拟了不同速率下的码型转换过程.实验实现了稳定的10，20和40 Gbit/s的NRZ到PRZ信号的码型转换，分析了影响码型转换输出特性的因素，理论分析结果与实验结果基本符合. 关键词： 超快非线性干涉仪 半导体光放大器 全光码型转换     

基于半导体光放大器的非归零信号时钟恢复

提出了一种基于半导体光放大器加窄带光纤光栅滤波器,将非归零信号转换为伪归零信号,再把伪归零信号注入到主动锁模环行腔激光器进行时钟提取的非归零信号时钟恢复方案.利用该方案实现了10 Gb/s伪随机非归零信号的全光时钟恢复,对工作原理和结果进行了分析和讨论.实验证明该方案具有结构简单,调整容易,输出波形好的特点.     

10 Gb/s全光3R再生的研究

报道了对10Gb／s恶化数据信号的全光3R(再放大、再定时、再整形)再生的实验研究。针对利用基于半导体光放大器的注入锁模环形激光器进行时钟恢复时的码型效应问题,提出了利用梳状滤波器对信号进行预处理。利用这个技术极大的减小了由于码型效应造成的时钟信号的幅度和时间抖动,从恶化的数据信号中恢复出无码型效应的高质量光时钟脉冲。信号整形的关键是光判决门,性能良好的判决门可以进一步提高信号的消光比、减小抖动。研究了基于电吸收调制器的信号再整形。利用上述器件构成的3R再生器,实现了10Gb／s恶化信号的全光3R再生。     

40 Gb/s信号的全光3R再生

研制出以注入锁模光纤激光器进行时钟恢复、电吸收调制器（EAM）作光判决门进行信号再整形的新型全光3R再生器,成功地运行于40Gb／s。理论和实验证明锁模环形激光器腔内放置的可调谐光滤波器的透射谱形状对时钟的脉宽有显著影响,超高斯透射谱的光滤波器利于获得窄时钟光脉冲,腔内放置这样的滤波器使恢复的时钟光脉冲谱宽达0．44nm、脉宽6ps、时间抖动小于1ps。最佳选择用作光判决的开关门的参量,改善了开关门的传输函数,使其接近阶跃函数,并使得开关窗宽度达到最佳。对于被剩余色散恶化的40Gb／s归零码信号进行了3R再牛,再生后达到了无误码。     

10、20、40Gb/s速率下恶化信号的光时钟提取

报道了一种全部由10GHz带宽的元件构成的、用于时钟提取的双环注入锁模光纤激光器.这种装置集光电振荡器(OEO)与注入锁模光纤激光器的优点于一体,利用它不仅从恶化的数据信号中实现了10Gb/s的位时钟提取,在采用了光电振荡器的分频、锁模光纤激光器的有理谐波锁模以及F-P梳状滤波器的频率倍乘技术以后,还从20Gb/s和40Gb/s的恶化信号中提取出了位时钟.该方案的另一个优点是无码型效应.     

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

A novel scheme to implement clock recovery from degraded signals is proposed and demonstrated based on an optoelectronic oscillator and a dual-wavelength mode-locked fiber ring laser with distributed dispersion cavity. The scheme can obtain wavelength-tunable optical clocks at two wavelengths, which is highly desirable for composite optical logic gates, cascaded optical signal processing modules or optical signal processing modules that need synchronized pulses at multiple wavelengths. In addition, the scheme can operate in both RZ and NRZ systems. The feasibility of the method is demonstrated by an experiment, in which dual-wavelength 10-GHz optical clock with a timing jitter less than 170 fs is obtained from 10-Gb/s degraded RZ and NRZ signals. The optical clocks can be tuned from 1530 to 1565 nm.     

Generalized analytical solutions for secure transmission of signals using a simple communication scheme with numerical and experimental confirmation

A novel explicit analytical solution is reported for the transmission and recovery of information signals using a simple communication scheme. Analytical solutions are obtained for the normalized state equations of coupled second-order chaotic transmitter and receiver systems embedding the information signal. The analytical solution of the difference system obtained from the state equations of the transmitter and receiver systems has been identified as a measure of the recovered information signal which is transmitted securely by chaotic masking. The analytical solutions are used to reveal the nature of synchronization and the enhancement of the amplitude of recovered information signal. The difference signal of the coupled state variables indicating the recovered information signal obtained through numerical simulations is presented to validate the analytical results. The electronic circuit experimental results are presented to confirm the analytical and numerical results of the communication scheme discussed.     

利用光锁相环路实现40 Gb/s时钟恢复

提出并建立了一种新型的基于光纤四波混频效应和压控光脉冲源的光锁相环路(OPLL),用于光时分复用系统(OTDM)中的时钟恢复过程。从理论上分析了其工作原理,及各模块结构和功能。利用高非线性光纤中的四波混频效应实现全光鉴相器,有效缩短了光纤长度,减小了光纤色散引起的脉冲走离,鉴相器消光比超过30 dB。采用再生锁模光纤激光器实现压控光脉冲源,在保证脉冲质量的前提下,重复频率调节范围达到380 kHz。在40 Gb/s时钟恢复实验中,获得脉宽为7.2 ps、接近变换极限的时钟脉冲,时间抖动(RMS)为152 fs,超模抑制比大于60 dB。实验证明,输入信号幅度波动和码型效应对环路影响很小。     

160-Gb/s polarization-multiplexing optical NRZ-DQPSK transmission using differential detection

Using differential detection,we perform polarization-multiplexing 160-Gb/s optical non-return-to-zero(NRZ) differential quadrature phase shift keying(DQPSK) signal transmission over 100-km standard single mode fiber at a bit error rate(BER) of less than 10-9.The enabling technology includes clock recovery,fine dispersion compensation,and polarization tracking for de-multiplexing.Furthermore,a hybrid clock recovery scheme is proposed.The scheme is realized with ordinary devices using an optoelectrical modula...     

40 Gbit/s all-optical clock recovery based on the injection mode-locked fiber ring laser

All-optical clock recovery is a key technology in all-optical 3R (Re-timing, Re-shaping, Re-amplifying) regeneration. In this paper, we demonstrate an all-optical clock recovery circuit based on injection mode-locked fiber laser. We have successfully extracted 40 GHz optical clock pulse from 40 Gb/s pseudorandom signal. Before the injected signal goes into the ring cavity, we make it pass a Mach–Zender interferometer (MZI) firstly. And thereby the clock component in the injected signal has been increased relatively, which is benefit to the clock recovery. We obtain firstly 10 GHz clock signal with perfect waveform from 10 Gb/s pseudorandom data stream, and then we extract 40 GHz clock signal from 40 Gb/s pseudorandom signal.     

All-optical error-bit amplitude monitor based on NOT and AND gates in cascaded semiconductor optical amplifiers

This paper proposes and simulates a novel all-optical error-bit amplitude monitor based on cross-gain modulation and four-wave mixing in cascaded semiconductor optical amplifiers （SOAs）, which function as logic NOT and logic AND, respectively. The proposed scheme is successfully simulated for 40 Gb/s return-to-zero （RZ） signal with different duty cycles. In the first stage, the SOA is followed by a detuning filter to accelerate the gain recovery as well as improve the extinction ratio. A clock probe signal is used to avoid the edge pulse-pairs in the output waveform. Among these RZ formats, 33% RZ format is preferred to obtain the largest eye opening. The normalized error amplitude, defined as error bit amplitude over the standard mark amplitude, has a dynamic range from 0.1 to 0.65 for all RZ formats. The simulations show small input power dynamic range because of the nonlinear gain variation in the first stage. This scheme is competent for nonreturn-to-zero format at 10Gb/s as well.