离子液体[BMIM]Cl预处理对微晶纤维素酶解的影响

以微晶纤维素为研究对象, 设计了离子液体1-丁基-3-甲基咪唑氯盐(1-butyl-3-methylimidazolium chloride, [BMIM]Cl)预处理微晶纤维素Avicel的实验方法以实现纤维素的高效酶解糖化. 在[BMIM]Cl中Avicel完全溶解, 经水洗沉淀得到再生纤维素, 回收后的离子液体可重复利用. 预处理后底物酶解的可溶性糖转化率在24 h时高达94.65%, 较之同样条件下未经预处理底物的酶解糖转化率(48.57%)有飞跃性提升. 进一步考察了离子液体预处理对纤维素结构及形态的影响, 结果表明: [BMIM]Cl预处理后Avicel氢键减弱; 结晶度明显下降, 结晶型态由纤维素I型转变为纤维素II型; 由规整的平行排布转变为疏松有孔的无序形貌. 正是离子液体预处理引起的纤维素微观与宏观结构性质的显著改变使得再生后纤维素酶解的可溶性糖转化率大幅提高.     

Interactions of Ionic Liquids with Polysaccharides – 2: Cellulose

Some general comments about ionic liquids (ILs) and carbohydrates are given. The main scope of the review is to discuss the present state of the art of chemical modification of cellulose applying IL as reaction media considering own research results. ILs, namely 1-butyl-3-methylimidazolium chloride (BMIMCl), 1-ethyl- 3-methylimidazolium chloride (EMIMCl), 1-butyl-2,3-dimethylimidazolium chloride (BDMIMCl), 1-allyl-2,3-dimethylimidazolium bromide (ADMIMBr) and 1-ethyl-3- methylimidazolium acetate (EMIMAc) are solvents for cellulose (even for high molecular bacterial synthesized cellulose) and can easily be applied as reaction media for cellulose modification. We investigated the homogeneous acylation, carbanilation and silylation of the biopolymer cellulose. Under mild conditions and within short reaction time at low temperature (65 °C to 80 °C) and low excess of reagent, various cellulose esters and carbanilates, dendronized cellulose and trimethylsilyl cellulose were obtained. The DS of the cellulose derivatives can be controlled by varying the reaction time, reaction temperature and the IL used as reaction medium.     

Understanding the mechanism of cellulose dissolution in 1-butyl-3-methylimidazolium chloride ionic liquid via quantum chemistry calculations and molecular dynamics simulations

While N,N′-dialkylimidazolium ionic liquids (ILs) have been well-established as effective solvents for dissolution and processing of cellulose, the detailed mechanism at the molecular level still remains unclear. In this work, we present a combined quantum chemistry and molecular dynamics simulation study on how the ILs dissolve cellulose. On the basis of calculations on 1-butyl-3-methylimidazolium chloride, one of the most effective ILs dissolving cellulose, we further studied the molecular behavior of cellulose models (i.e. cellulose oligomers with degrees of polymerization n = 2, 4, and 6) in the IL, including the structural features and hydrogen bonding patterns. The collected data indicate that both chloride anions and imidazolium cations of the IL interact with the oligomer via hydrogen bonds. However, the anions occupy the first coordination shell of the oligomer, and the strength and number of hydrogen bonds and the interaction energy between anions and the oligomer are much larger than those between cations and the oligomer. It is observed that the intramolecular hydrogen bond in the oligomer is broken under the combined effect of anions and cations. The present results emphasize that the chloride anions play a critically important role and the imidazolium cations also present a remarkable contribution in the cellulose dissolution. This point of view is different from previous one that only underlines the importance of the chloride anions in the cellulose dissolution. The present results improve our understanding for the cellulose dissolution in imidazolium chloride ILs.     

离子液体预处理对羊毛蛋白酶水解性能的影响

利用一种新型绿色溶剂--离子液体1-丁基-3-甲基咪唑氯盐(1-butyl-3-methylimidazolium chloride,[BMIM]Cl)对羊毛进行预处理,从而提高蛋白酶对羊毛的水解效率.系统研究了[BMIM]Cl预处理对蛋白酶处理后羊毛减量率、碱溶解度、蛋白质释放速率、氨基酸组成的影响,并从表面形态、表面润湿性能和纤维晶体结构等方面探讨了[BMIM]Cl对蛋白酶水解的促进作用机理.结果表明:羊毛经过[BMIM]Cl处理后,纤维减量率从2.68%提高到4.47%,碱溶解度达到11.6%,水解液中蛋白质浓度的变化显示[BMIM]Cl预处理使得蛋白质释放速率快速增加;羊毛纤维中低硫和部分高硫氨基酸百分比的降低进一步证实[BMIM]Cl预处理对蛋白酶水解起到了全面促进作用.SEM、润湿接触角以及WAXD测试结果显示预处理破坏了纤维鳞片层,增加了表面润湿性能,并且使得纤维结晶度下降,从而提高了蛋白酶对纤维的可及度,有利于酶解速率的提高.     

High-resolution 13C NMR studies of cellulose and cellulose oligomers in ionic liquid solutions

High-resolution 13C NMR studies of cellulose and cellulose oligomers dissolved in the ionic liquid (IL) 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) show that the beta-(1-->4)-linked glucose oligomers are disordered in this medium and have a conformational behavior which parallels the one observed in water, and thus, reveal that the polymer is disordered in IL solution as well.     

Determination of ethanol in ionic liquids using headspace solid-phase microextraction–gas chromatography

The application of ionic liquids (ILs) as nonderivatizing solvents for the pretreatment and regeneration of cellulose is a growing area of research. Here we report the development of a rapid and simple method for the determination of residual ethanol content in two hydrophilic ILs, 1-butyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate. The method utilizes headspace solid-phase microextraction coupled with gas chromatography at elevated extraction temperatures, resulting in rapid equilibration times. The effect of IL water content on the ethanol extraction efficiency is presented. Recovery experiments carried out in real samples gave recoveries ranging from 96.8 to 98.2%.     

Dissecting force interactions in cellulose deconstruction reveals the required solvent versatility for overcoming biomass recalcitrance

Pretreatment for deconstructing the multifaceted interaction network in crystalline cellulose is a limiting step in making fuels from lignocellulosic biomass. Not soluble in water and most organic solvents, cellulose was found to dissolve in certain classes of ionic liquids (ILs). To elucidate the underlying mechanisms, we simulated cellulose deconstruction by peeling off an 11-residue glucan chain from a cellulose microfibril and computed the free-energy profile in water and in 1-butyl-3-methylimidazolium chloride (BmimCl) IL. For this deconstruction process, the calculated free-energy cost/reduction in water/BmimCl is ～2 kcal/mol per glucose residue, respectively. To unravel the molecular origin of solvent-induced differences, we devised a coarse graining scheme to dissect force interactions in simulation models by a force-matching method. The results establish that solvent-glucan interactions are dependent on the deconstruction state of cellulose. Water couples to the hydroxyl and side-chain groups of glucose residues more strongly in the peeled-off state but lacks driving forces to interact with sugar rings and linker oxygens. Conversely, BmimCl demonstrates versatility in targeting glucose residues in cellulose. Anions strongly interact with hydroxyl groups, and the coupling of cations to side chains and linker oxygens is stronger in the peeled-off state. Other than enhancing anion-hydroxyl group coupling, coarse-grain analysis of force interactions identifies configuring cations to target side chains and linker oxygens as a useful design strategy for pretreatment ILs. Furthermore, the state dependence of solvent-glucan interactions highlights specific stabilization and/or frustration of the different structure states of cellulose as important design parameters for pretreatment solvents.     

Ionic liquids as reaction medium in cellulose functionalization

The application of different ionic liquids (IL), namely 1-N-butyl-3-methylimidazolium chloride ([C(4)mim](+)Cl(-)), 3-methyl-N-butyl-pyridinium chloride and benzyldimethyl(tetradecyl)ammonium chloride were investigated as solvents for cellulose. The ILs used have the ability to dissolve cellulose with a degree of polymerization in the range from 290 to 1 200 to a very high concentration. Using [C(4)mim](+)Cl(-), no degradation of the polymer appears. By (13)C NMR measurement it was confirmed that this IL is a so-called non-derivatizing solvent. [C(4)mim](+)Cl(-) can be applied as a reaction medium for the synthesis of carboxymethyl cellulose and cellulose acetate. Without using any catalyst, cellulose derivatives with high degree of substitution could be prepared.(13)C NMR spectrum of cellulose dissolved in the IL [C(4)mim](+)Cl(-) (top). The (13)C NMR spectrum of cellulose dissolved in DMSO/tetrabutylammonium fluoride trihydrate is shown for comparison (bottom).     

N-methyl-2-pyrrolidonium-based Brönsted-Lewis acidic ionic liquids as catalysts for the hydrolysis of cellulose

We experimentally studied the catalytic performances of a series of Br?nsted-Lewis acidic N-methyl-2-pyrrolidonium metal chlorides([Hnmp]Cl/MCl_x, where M=Fe, Zn, Al, or Cu) for the hydrolysis of microcrystalline cellulose(MCC) and cotton to produce reducing sugar. A variety of factors, such as temperature, time, ionic liquid(IL) species, IL dosage, and the concentration of the metal chloride were investigated. [Hnmp]Cl/FeCl_3 presented the best hydrolysis performance, affording a 98.8% yield of total reducing sugar from MCC(1 h, 100 °C, 0.1 g MCC, 0.2 g acidic IL, 2.0 g [Bmim]Cl as solvent), which is better than or comparable to results previously obtained with other –SO_3H functionalized acidic ILs. The hydrolysis performances of [Hnmp]Cl/MClx were rationalized using density functional theory calculations, which indicated that interactions between the metal chlorides and the cellulose, including charge-transfer interactions are important in the hydrolysis of cellulose and degradation of glucose. This work shows that Br?nsted-Lewis acidic ILs are potential catalysts for the hydrolysis of cellulose to produce sugar.     

Beyond a solvent: the roles of 1-butyl-3-methylimidazolium chloride in the acid-catalysis for cellulose depolymerisation

In this report, 1-butyl-3-methylimidazolium chloride ([C₄C₁im]Cl) is demonstrated to enhance the kinetics of acid-catalysed hydrolysis of 1,4-β-glucans in binary solvent mixtures. [C₄C₁im]Cl plays other roles in the reaction beyond acting as a solvent for cellulose, as currently accepted. In fact, the presence of the IL increases the Hammett acidity of the catalyst dissolved in the reaction medium. The kinetic data from cellobiose and cellulose hydrolysis directly correlate with the acid strength found for p-toluenesulfonic acid in the different reaction media studied here. The current report identifies neglected, but yet very important phenomena occurring in cellulose depolymerisation.     

1-烯丙基,3-甲基咪唑室温离子液体的合成及其对纤维素溶解性能的初步研究

随着不可再生资源 (如石油、天然气、煤矿和金属矿藏等 )的急剧耗竭 ,天然高分子的开发与利用日益引起世人的关注 .纤维素作为自然界中最丰富的天然高分子材料 ,其开发与利用一直备受关注[1] .但由于天然纤维素较高的结晶度和分子间和分子内存在大量的氢键 ,使其具有不熔化、在大多数溶剂中不溶解的特点 ,这成为纤维素在应用开发中的最大障碍 .开发有效的纤维素溶剂体系是解决这一难题的关键 .研究较多的纤维素溶剂主要有铜氨溶液、Ｎ 甲基吗啉 Ｎ 氧化物(ＮＭＭＯ)溶剂体系 ,氯化锂 二甲基乙酰胺 (ＬｉＣｌ ＤＭＡＣ)溶剂体系等[2 ] ,而这…     

Trichoderma reesei cellulases and their core domains in the hydrolysis and modification of chemical pulp

The action of monocomponent Trichoderma reesei endoglucanases (EG I, EG II; EC 3.2.1.4) and cellobiohydrolases (CBH I, CBH II; EC 3.2.1.91) and their core proteins was compared using isolated celluloses and bleached chemical pulp. The presence of cellulose binding domain (CBD) in the intact enzymes did not affect their action against soluble substrates. In the case of insoluble isolated celluloses and the chemical pulp the presence of CBD enhanced the enzymatic hydrolysis of cellulose. The effect of CBD was more pronounced in the cellobiohydrolases, hydrolysing mainly crystalline cellulose, than in the endoglucanases which were more efficient in hydrolysing amorphous cellulose. The pulp properties measured, that is, viscosity and strength after PFI refining, were equally affected by the treatment with intact enzymes and corresponding core proteins, suggesting that the presence of CBD in intact cellulases affects mainly the cellulose hydrolysis level and less the mode of action of T. reesei cellulases in pulp. The better beatability of the bleached chemical pulp treated with intact endoglucanases than that treated with the corresponding core proteins suggests that the presence of CBD in endoglucanases could, however, result in beneficial effects on pulp properties.     

Enhanced saccharification of lignocellulosic biomass with1-allyl-3-methylimidazolium chloride（Amim Cl） pretreatment

A simple and efficient method of enhancing biomass saccharification by microwave-assisted pretreatment with dimethyl sulfoxide/1-allyl-3-methylimidazolium chloride is proposed. Softwood（pine wood（PW））, hardwoods（poplar wood, catalpa bungi, and Chinese parasol）, and agricultural wastes（rice straw, wheat straw, and corn stover（CS）） were exploited. Results showed that the best pretreatment effect was in PW with 54.3% and 31.7% dissolution and extraction ratios, respectively. The crystal form of cellulose in PW extract transformed from I to II, and the contended cellulose ratio and glucose conversion ratio reached 85.1% and 85.4%, respectively. CS after steam explosion achieved a similar pretreating effect as PW, with its cellulose hydrolysis ratio reaching as high as 91.5% after IL pretreatment.     

1-烷基-3-甲基咪唑氯化物焓变的热重分析

The structures of ionic liquids (ILs) based on 1-alkyl-3-methylimidazolium chloride [C_nmim]Cl (n = 2, 4, 6), (1-ethyl-3-methylimidazolium chloride [C₂mim]Cl, 1-butyl-3-methylimidazolium chloride [C₄mim]Cl, and 1-hexyl-3-methylimidazolium chloride [C₆mim]Cl) were elucidated by ¹H NMR and ¹³C NMR experiments. The vaporization characteristics of these ILs were studied by thermogravimetric analysis. Dynamic and isothermal thermogravimetric experiments were conducted in this study. The purpose of the dynamic experiments was to determine the initial decomposition temperature of the experimental sample and the temperature range for the isothermal thermogravimetric experiments. The purpose of the isothermal experiments was to record the mass dependence of the sample on time in the experimental temperature range. The Langmuir equation and Clausius-Clapeyron equation were used to fit the experimental data and obtain the vaporization enthalpies of these ILs at the average temperature within the experimental temperature range. However, in order to expand the applicability of the estimated values and to compare them with the literature data, the vaporization enthalpy ΔH_vap(T_av) measured at the average temperature was converted into vaporization enthalpy ΔH_vap(298) at ambient temperature. The difference between the heat capacities of the ILs in the gaseous and liquid states at constant pressure, Δ_l^gC_pm^ө proposed by Verevkin, was used in this conversion process. The experimental data for substance density and surface tension at other temperatures were obtained by referring to the literature. In addition, the data for density and surface tension at T = 298.15 K were obtained by applying the extrapolation method to the literature values for other temperatures. The vaporization enthalpy of the 1-octyl-3-methylimidazolium chloride IL [C₈mim]Cl was estimated by using the new vaporization model we had proposed in our previous work and compared with the reference value. The estimated value for [C₈mim]Cl was on the same order of magnitude as the reference value. We compared the vaporization enthalpies in the present study with those for the carboxylic acid imidazolium and amino acid imidazolium ILs ([C_nmim]Pro (n = 2-6) and [C_nmim]Thr (n = 2-6), respectively in our previous work. The results revealed that a change in the anion type affects the vaporization enthalpy of the ILs in the order amino acid imidazolium > carboxylic acid imidazolium > halogen imidazolium, when the cation is the same. Considering the structural differences between the three kinds of ILs, the abovementioned order may be related to the intermolecular hydrogen bonds. There were no intermolecular hydrogen bonds in the [C_nmim]Cl (n = 2, 4, 6) ILs studied here. Therefore, the vaporization enthalpy of [C_nmim]Cl (n = 2, 4, 6) was the lowest among the three kinds of ILs considered.     

Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

The changes of crystalline structure of cellulose during dissolution in 1-butyl-3-methylimidazolium chloride

The morphology and crystalline structure changes of cellulose during dissolution in 1-butyl-3-methylimidazolium chloride [(BMIM)Cl] were investigated by optical microscopy and synchrotron radiation wide-angle X-ray diffraction (WAXD). Neither swelling nor dissolution of cellulose was observed under the melting point of [BMIM]Cl. While the temperature was elevated to 70 °C, the swelling phenomenon of cellulose happened with the interplanar spacing of ( _boxclose_boxclose_boxclose0 1\bar{1}0 ) and (020) planes increased slightly. With the temperature further going up to 80 °C, cellulose was dissolved gradually with the crystallinity (W _c,x) and crystalline index (CrI) of cellulose decreased rapidly, which indicated the crystalline structure of cellulose was destroyed completely and transformed into amorphous structure.     

Carbon-based ionogels: tuning the properties of the ionic liquid via carbon-ionic liquid interaction

The behavior of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium dicyanamide [Emim][DCA] and 1-ethyl-3-methylimidazolium triflate [Emim][TfO], in (meso)porous carbonaceous hosts was investigated. Prior to IL incorporation into the host, the carbon matrix was thermally annealed between 180 and 900 °C to control carbon condensation and surface chemistry. The resulting materials have an increasing "graphitic" carbon character with increasing treatment temperature, reflected in a modified behavior of the ILs when impregnated into the carbon host. The two ILs show significant changes in the thermal behavior as measured from differential scanning calorimetry; these changes can be assigned to anion-π interaction between the IL anions and the pore wall surfaces of these flexible carbonaceous support materials.     

Separation of ternary systems of hydrophilic ionic liquid with miscible organic compounds by RPLC with refractive index detection

A rapid and simple analytical method was developed for the simultaneous and quantitative determination and separation of hydrophilic imidazolium ionic liquids (ILs) (1-butyl-3-methylimidazolium chloride, [C(4)mim]Cl; 1-hexyl-3-methylimidazolium chloride, [C(6)mim]Cl; 1-octyl-3-methylimidazolium chloride, [C(8)mim]Cl; 1-allyl-3-methylimidazolium chloride, [Amim]Cl; or 1-allyl-3-methylimidazolium bromide, [Amim]Br) with miscible ethyl acetate and EtOH and their mixtures using reverse phase liquid chromatography coupled with refractive index detection (RPLC-RI). The influence of 60 to 100% (volume percentage) methanol in the mobile phase on the IL systems ([C(4)mim]Cl, [C(6)mim]Cl, [C(8)mim]Cl, [Amim]Br, or [Amim]Cl)-ethyl acetate-EtOH was investigated. The optimum mobile phase for the system [C(8)mim]Cl-ethyl acetate-EtOH, [C(4)mim]Cl-ethyl acetate-EtOH, [Amim]Br-ethyl acetate-EtOH and [Amim]Cl-ethyl acetate-EtOH was methanol/water (60:40, v/v), and methanol/water (70:30, v/v) for [C(6)mim]Cl-ethyl acetate-EtOH. Under optimum mobile phase conditions for each system, the RSD of the retention time ranged from 0.02 to 0.04%, and the RSDs of the peak area percent ranged from 0.23 to 1.85%, which showed good reproducibility of the RPLC-RI method. The RPLC-RI method can determine IL, ethyl acetate, and EtOH simultaneously in 5 min, and the analytes, especially IL, can be eluted completely. The results show that the RPLC-RI method can be used to separate and determine ILs in mixtures with organic compounds simultaneously and quantitatively.     

Pretreatment of Reed by Wet Oxidation and Subsequent Utilization of the Pretreated Fibers for Ethanol Production

Common reed (Phragmites australis) is often recognized as a promising source of renewable energy. However, it is among the least characterized crops from the bioethanol perspective. Although one third of reed dry matter is cellulose, without pretreatment, it resists enzymatic hydrolysis like lignocelluloses usually do. In the present study, wet oxidation was investigated as the pretreatment method to enhance the enzymatic digestibility of reed cellulose to soluble sugars and thus improve the convertibility of reed to ethanol. The most effective treatment increased the digestibility of reed cellulose by cellulases more than three times compared to the untreated control. During this wet oxidation, 51.7% of the hemicellulose and 58.3% of the lignin were solubilized, whereas 87.1% of the cellulose remained in the solids. After enzymatic hydrolysis of pretreated fibers from the same treatment, the conversion of cellulose to glucose was 82.4%. Simultaneous saccharification and fermentation of pretreated solids resulted in a final ethanol concentration as high as 8.7 g/L, yielding 73% of the theoretical.     

Binary ionic liquid mixtures as gas chromatography stationary phases for improving the separation selectivity of alcohols and aromatic compounds

Binary mixtures of two ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride (BMIM-Cl) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf2), have been studied for the first time as gas chromatographic stationary phases. The two ILs differ only in the nature of the associated anion. The solvation parameter model was used to examine the change of solvation interactions with the IL stationary phase composition. The hydrogen bond basicity increased linearly as the stationary phase was enriched with the BMIM-Cl IL. The retention factor of short-chained alcohols increased by as much as 1100% when performing the separation on a column containing an IL mixture of 25% BMIM-NTf2/75% BMIM-Cl compared to that of the neat BMIM-NTf2 IL column. By tuning the composition of the IL-stationary phase, the separation selectivity and resolution factors of alcohols and aromatic compounds were improved. A reversal of elution order was observed for specific classes of analytes with enhancements in the stationary phase hydrogen bond basicity.