电感耦合等离子体质谱法测定矿物渣中微量铀和钍

采用改进的微波消解程序处理矿物渣样品,用185Re作为内标同位素,以在线内标加入法补偿样品的基体干扰,提出了测定矿物渣中微量铀和钍的电感耦合等离子体质谱法.铀和钍的方法检出限分别为0.017,0.021 ng·g-1;铀和钍的平均加标回收率(n=6)分别为99.0%,101.3%;相对标准偏差(n=6)分别为4.02%和3.54%.两种标准物质中铀和钍的测定结果与标准值相符合.     

Determination of Cesium,Thorium and Uranium in IAEA Standard Reference Materials by ICP-MS

The collaborative analysis of the selected biological reference materials for use in Coordinated Research Programme. A method has been presented for determination of Reference Values of Cs,Th and U in 6 Kinds of SRM including NIST-SRM 1548 and 1548a Total Diet,SRM 1486 Bone Meal,SRM 8414 Bovine Muscle Powder,SRM 1575 Pine Needles and SRM 1566a Oyster Tissue provided by IAEA useing Elan 5000 ICP-MS (P-E/SCIEX).     

Sequential Isotopic Determination of Strontium, Thorium, Plutonium, Uranium, and Americium in Bioassay Samples

A procedure is presented to provide sequential determination of isotopic strontium, thorium, plutonium, uranium, and americium in a single biological sample. The method begins with digestion and dissolution of the sample. Tracers and/or carriers are added to the sample for the purpose of chemical yield monitoring. Strontium is first separated from the actinides and from most of the interfering constituents of the sample by precipitation as carbonates. Strontium isotopes are purified, and ⁸⁹Sr and ⁹⁰Sr are measured by gas proportional counting. Actinides are separated and purified by ion exchange chromatography, co-precipitated with neodymium fluoride, filtered, and counted by alpha-particle spectrometry.     

X射线荧光光谱法同时测定矿石中铀和钍

建立了X射线荧光光谱法测定矿石样品中铀、钍含量的快速分析方法。采用高压粉末制样法,对不同含量的放射性样品的压片压力、粒径、含水率、用量等处理条件到进行单因素实验。在400 MPa压力下压制,克服了低压制样的弊端,制备的样片表面光滑、致密,大幅改善了制样重现性,有效地减少了部分基体效应,铀校准曲线的标准偏差从0.053%降到0.0071%,钍校准曲线的标准偏差从0.062%降到0.0057%。经国家一级标准物质验证,表明方法准确、可靠,能满足样品中铀、钍含量日常分析要求。     

Determination of Traces of Uranium and Thorium in Environmental Matrices by Neutron Activation Analysis

Radioactive elements like ²³²Th and ²³⁸U along with their daughter products, form part of all environmental matrices and are getting transferred to living beings by different pathways, leading to a continuous radiation exposure and need to be monitored. This paper presents an analytical methodology, highlighting the need to separate interfering beta- and gamma-emitters from the analytes, when neutron activation analysis is employed for the determination of traces of uranium and thorium in soil and plant materials. The method has been applied to the soil and plant materials from selected regions of India, along with standard reference materials to verify the validity of the proposed separation scheme. The overall reproducibility of the procedure was 2–10%. The concentration values of uranium and thorium so obtained, have been used to calculate transfer factors from soil to various parts of wheat plant.     

Determination of Uranium and Thorium Isotope Ratios by Inductively Coupled Plasma Mass Spectrometry

Measurement conditions were selected and a procedure was proposed for determining the ²³⁴U/²³⁸U and ²³⁰Th/²³²Th isotope ratios using an ELEMENT single-channel double-focusing inductively coupled plasma mass spectrometer. The procedure was tested in analyzing bottom sediments from Lake Baikal with the extraction preconcentration of uranium and thorium. The accuracy of the procedure was verified using certified reference materials and a model solution by comparing the results obtained with the data of spectrometry.     

对-乙酰基偶氮胂作淋洗剂阳离子交换分离及光度测定钍与稀土(铀、钪)

本文提出用显色剂--对-乙酰基偶氮胂作淋洗剂,阳离子交换分离钍与稀土(铀、钪),流出液可直接用光度法测定,将分离和测定结合起来的新方法.操作较简便快速.分离测定了矿石中稀土及钍,结果尚属满意.     

磷酸三丁酯萃淋树脂色层分离电感耦合等离子体质谱法测定富稀土样中微量铀和钍

研究了磷酸三丁酯萃淋树脂色层分离,电感耦合等离子体质谱法测定富稀土样中微量铀、钍的方法。样品经消解后,以磷酸三丁酯萃淋树脂为固定相、8 mol/L硝酸为流动相过柱分离,样品中的大部分稀土元素随流动相流出,而铀和钍则被固定相吸附,用去离子水洗脱后,再用电感耦合等离子体质谱仪测定。铀、钍的检出限分别为0.06,0.16μg/L,测定结果的相对标准偏差均小于10%(n=5),加标回收率为98%~105%。对稀土矿石标准物质进行测定,测定值与推荐值相符。该法操作简便,测定结果可靠,适于富稀土样中微量铀、钍的测定。     

天然水源中微量铀钍含量与摄入量研究

分析了居民饮用水及其天然水源中微量铀，钍的含量，并与尿液中铀，钍含量进行了比较。结果表明，上海地区天然水源在国家规定的允许范围内，接近于尿液中铀，钍的日排出量。     

Facile Access to Uranium and Thorium Phosphaethynolate Com-plexes Supported by Tren:Experimental and Theoretical Study

The issue of covalence of actinide complexes remains controversial to date.The introduction of 2-phosphaethynolate anion into acti-nide complexes is expected to...     

Backbonding in Thorium(IV) and Uranium(IV) Diarsenido Complexes with tBuNC and CO

The coordination of tBuNC and CO with the diarsenido complexes (C₅Me₅)₂An(η²-As₂Mes₂), An=Th, U, has been investigated. For the first time, a comparison between isostructural complexes of Th^IV and U^IV has been possible with CO; density functional calculations indicated an appreciable amount of π backbonding that originates from charge transfer from an actinide-arsenic sigma bond. The calculated CO stretching frequencies in the Th^IV and U^IV diarsenido complexes are consistent with the experimental measurements, both show large shifts to lower frequency. We demonstrate that the π backbonding is crucial to explaining the red shifts of CO frequency upon An^IV complex formation. Interestingly, this interaction essentially correlates to the parallel orientation of π*(C−O) orbitals relative to the An−As bond.     

岩石矿物中铀钍的分析方法进展——非破坏分析法

非破坏分析法部分着重介绍了岩石矿物中铀钍的非破坏性分析方法原理、特点和应用范围。非破坏分析手段主要包括:中子活化分析法(NAA)、裂变径迹法(FTA)、X射线荧光光谱法(XRF)、激光烧蚀光谱法(LIBS)和γ能谱直接测量法。非破坏分析鉴于其独特优势仍有发展空间,LIBS技术是新近发展的具有较大潜力的技术手段,而γ能谱直接测量法针对铀钍等放射性核素的测量具有无可比拟的发展优势。     

激光烧蚀-多接收电感耦合等离子体质谱测定铀颗粒物中铀全同位素比值

建立了铀颗粒物中铀全同位素比值的分析方法,采用双面胶带装载铀颗粒物样品,优化激光烧蚀-多接收电感耦合等离子体质谱的运行参数,用标准样品交叉法校正质量分馏和探测器检测效率,测定了粒径几十微米的铀标准物质CRM124-1、GBW04234和GBW04238中铀全同位素比值.本方法对铀颗粒物中235U/238U、234 U/235U和236 U/235U测量的相对实验标准不确定度分别小于0.050％,1.7％和1.8％,测量结果与参考值在不确定度范围内符合.研究表明,本方法可快速、准确、高精度地测定铀颗粒物中铀全同位素比值.     

Copper (II) as an Amperometric Indicator: Determination of Thorium

Abstract

It has been demonstrated that copper (II) is an attractive amperometric indicator for the titration of small amounts of thorium in solution. EDTA was used as the titrant. Best results are obtained in the titration when the mole ratio of thorium to copper is high. The method should be applicable to several other metal ions that form more stable EDTA complexes than does copper.     

Synthesis and Characterization of Solid Coordination Complexes of Diamides for Uranium(VI) and Thorium(IV)

Five kinds of solid coordination complexes of uranium(VI) and thorium(IV) with the diamide (N,N,N,N-tetrabutylmalon-amide (TBMA), N,N,N,N-tetrabutylsuccinylamide (TBSA), N,N,N,N-tetrabutylglutaramide (TBGA), N,N,N,N-tetrabutyl-adipicamide (TBAA)) were synthesized. All these complexes of UO₂(NO₃)₂·TBMA, UO₂(NO₃)₂· TBSA, [UO₂(NO₃)₂·(TBGA^1/2)₂] _x , UO₂(NO₃)₂·TBAA and Th(NO₃)₄·2TBMA were characterized by elemental analysis, UV spectra, IR spectra and ¹³C NMR spectra. The coordination form and proposed structures of the complexes are also discussed.     

Determination of the Uranium(VI) and ‐(IV) Species in Uranium Ores

The determination of the two species of uranium(VI and IV) present in 6 uranium ores was studied in relation to the chemical and mineralogical composition, humidity, and pH of the samples taken over from the mine. X‐ray diffraction studies, performed on the uranium ores in powder form allowed to establish their mineralogical composition. Thechemical analysis pointed out the presence, besides the two uranium species, of some microelements able to influence the U^VI/U^IV ratio in minerals and to leach out U^VI as uranyl ions from the corresponding minerals.     

Direct Spectrographic Determination of In,La, Nb and Sr in Thorium Oxide

Abstract

A d.c. are emission spectrographic method is described for the determination of ppm levels of In, La, Nb and Sr in thorium oxide. The method permits determination of the above low and high volatile impurity elements in thoria using AgCl as carrier in an atmosphere of oxygen. The carrier-distillation technique reported makes possible the following range of estimations: In : 1–50 ppm; La, Nb : 10–500 ppm and Sr: 2–100 ppm. The method is simple and rapid and its precision ranges from 14% for In to 18% for Nb. Observations made on the choice of carrier and internal standard are presented.     

Limitations of Tissue Analyses in Estimating the Initial Exposures to the Workers for Thorium, Uranium and Plutonium and Their Internal Dose Estimates

The present paper deals with the following questions: Can a piece of any tissue or organ obtained at autopsies and/or biopsies be analyzed to predict the organ and/or body burden, initial exposures, and the committed dose equivalents to the workers or retired workers from exposures to thorium, uranium, and plutonium and what are the consequences of using such materials in predicting the initial exposures and the dose estimates? Based on the studies of the distribution of uranium and thorium in former uranium miners and millers, the distribution of plutonium in general population, and several other studies dealing with the distribution of actinides in man, it is reasonable to state that the utilization of tissue analyses for estimating the initial exposure to the workers may have serious limitations. The regulatory agencies must restrict the conditional utilization of tissue analyses in estimating exposures to the workers for thorium, uranium, and plutonium.     

Sequential Voltammetric Determination of Uranium,Cadmium and Lead by Using the ex situ Bismuth Film Electrode: Application to Phosphate Fertilizers

A sequential voltammetric procedure for the determination of uranium, cadmium and lead was investigated at an ex situ bismuth film electrode (BiFE). First, the adsorptive stripping voltammetry was applied to assay the U(VI)‐cupferron complex in the differential pulse mode (detection limit of 1.0 µg L^?1, 200 s accumulation time). Through the manipulation of the same aliquot of the sample, efforts were made to quantify cadmium and lead by square wave anodic stripping voltammetry. Detection limits of 2.03 µg L^?1 for Cd (II) and 2.43 µg L^?1 for Pb (II) were calculated (100 s accumulation time). The methodology was successfully applied to phosphate fertilizer samples after open vessel wet decomposition (HNO₃/H₂O₂). The following value ranges were evaluated: U (VI) 37.2–150 mg kg^?1, Pb (II) 78.3–204 mg kg^?1 and Cd (II) 44.1–71.6 mg kg^?1. Validation was performed by using the standard reference materials SRM‐695 – phosphate fertilizer – and SRM‐1643e – water.