Synthesis of polymer nanocomposite ion-exchange membranes from sulfonated polystyrene and study of their properties

Methods for the preparation of composite ion-exchange membranes from polymer (polyvinylidene fluoride (PVDF), ultrahigh molecular weight polyethylene (UHMWPE), and polypropylene (PP)) matrices were considered. Polystyrene (PS) was introduced in the matrices by thermal polymerization of the monomer followed by sulfonation of the implant. The fundamentals of membrane synthesis from industrial polytetrafluoroethylene (PTFE, Teflon F-4) films by thermal polymerization of styrene in a film stretched in a monomer solution followed by sulfonation of incorporated PS were described. The literature on radiation- chemical synthesis of composite ion-exchange membranes based on polymer matrices with embedded polystyrene and its subsequent sulfonation was analyzed. Some problems of the kinetics and mechanism of thermal implantation of PS into various polymer matrices under different conditions were discussed. The physicochemical characteristics, structure, and transport properties of the membranes synthesized by thermal implantation of PS were reported. The obtained membranes were tested in low-temperature fuel cells.     

Dynamic mechanical properties of sulfonated polystyrene/alumina composites

Amino units were grafted onto the surface of small particle size alumina by reaction with 3-aminopropyltriethoxysilane. Atactic polystyrene (PS) was sulfonated (1-14 mol% sulfonation) and mixed with both modified and unmodified alumina at filler loadings varying from 30 to 80 wt %. The resulting composites were characterized by differential scanning calorimetry, Fourier transform infra-red spectroscopy, and dynamic mechanical spectroscopy in the glass transition region at a frequency of 1 Hz. Whereas mixtures of unsulfonated PS with either filler showed essentially no change in T_g with filler content, sulfonated PS saw its T_g increase as a function of filler loading at a rate which was greater following modification of the alumina. At a fixed filler loading of 30 wt%, the composite rubbery plateau modulus was found to increase with copolymer sulfonic acid content, while the loss tangent maximum corresponding to the glass transition broadened and decreased. These observations were interpreted as a manifestation of the decrease in polymer mobility brought upon by the formation of noncovalent crosslinks resulting from the proton transfer from the sulfonic acid units on the polymer to hydroxyl and/or amino units at the surface of the filler. © 1994 John Wiley & Sons, Inc.     

Hydrodynamic and conformational properties of dendron-modified polystyrene molecules

The molecular characteristics of polystyrene modified by the Frechet type dendrons of 1–4 generations were studied in tetrahydrofuran by viscometry, isothermal diffusion, electric birefringence, and dynamic and static light scattering. It was shown that dendronized polystyrene molecules whose polymerization degree changes from 1640 to 930 with an increase in the generation number of dendrons occur in the coillike conformation. The equilibrium rigidity of macromolecules tends to increase with increasing the generation number of dendrons. The Kuhn segment length grows from 3.9 nm for polystyrene molecules modified by dendrons of the first generation to 23.3 nm for polystyrene molecules carrying dendrons of the fourth generation.     

Microphase separation in sulfonated polystyrene ionomers

Small- and wide-angle x-ray scattering results for a series of un-neutralized and neutralized sulfonated polystyrenes are presented for the range of sulfonation from 0 to 7.26 mol %. From the small-angle scattering it is shown that above the 3 mol % level for both the zinc and sodium salts, a Bragg spacing (37 Å) and diameter (6.9–8.4 Å) of the scattering unit can be calculated. When the concentration of salt is increased, there is no appreciable change in the latter two measurements. The wide-angle data indicate that the cations do not influence to any large extent the basic intramolecular and intermolecular structure of polystyrene. All the data are consistent with the onset of clustering above a critical ion concentration.     

Glass transition in partially sulfonated polystyrene

The glass transition temperature T_g of partially sulfonated polystyrene has been measured dilatometrically as a function of degree of sulfonation. A semitheoretical relationship between T_g and degree of sulfonation has been derived by treating the strong-acid polymer as a highly polar copolymer of styrene and styrenesulfonic acid. The T_g of copolymer has been found to increase linearly up to 0.15 weight fraction of styrene-sulfonic acid w_A as given by: where T_gB is the glass transition temperature of loosely crosslined (1%) polystyrene matrix. Our experimental results agree well with theoretical relations developed on the basis of the iso-free-volume state of glass transition applied to sulfonated polystyrene. The marked linear increase in copolymer T_g with the styrenesulfonic acid is accounted for by the effect of progressively higher intermolecular forces due to the highly polar sulfonic acid substituents.     

Electrical and dynamooptical properties of Frechet dendron-modified polystyrene molecules in solutions

The electrooptical, dynamic, and dielectric characteristics of polystyrene modified by the Frechet dendrons of 1–4 generations have been studied in benzene, chloroform, and THF solutions. It has been shown that the Kerr constant and the shear optical coefficient for all the studied polymers coincide in sign and their absolute values increase with the dendron generation number. The intrinsic optical anisotropy of the repeating unit of dendronized polystyrene molecules is negative in sign, and its absolute value tends to grow with an increase in the generation number of dendrons. The frequency dispersions of the Kerr constand and of the dielectric polarization have been discovered for solutions of the modified polymer. The ratio between the times of relaxation characterizing the dispersion of dielectric permittivity and of the Kerr constant of solutions and the times of a rise and decay of electric birefringence measured on the onset and termination of the rectangular-pulsed field does not obey the longitudinal relaxation theory for polar macromolecules. The relaxation times of dielectric polarization and of electric birefringence tend to increase with the dendron generation number.     

Solubilization of oligosaccharides into chloroform by their incorporation into polystyrene as pendant groups

Solubilization of hydrophilic saccharide chains into organic solvents has been attempted by incorporating saccharide-substituted styrene unit into polystyrene main chain. Lactose-, maltopentaose, and amylose-substituted styrene monomers were copolymerized with styrene. Resulting chloroform-soluble copolymers were characterized, and structural formation was investigated. Copolymers of lactose-substituted styrene and maltopentaose-substituted styrene with styrene were dissolved into chloroform. The chloroform-soluble polymers contained about 12 disaccharide lactose chains or 1.7 maltopentaose chains as the pendant groups in one polystyrene molecule. Chloroform-insoluble methyl orange was dissolved into chloroform with the help of chloroform-soluble polystyrene having some saccharide chains. On the other hand, when an amylose-substituted styrene unit was inserted in a polystyrene chain, the resulting polymer became insoluble into chloroform. Amylose polysaccharide of DP_n = ∼24 was not dissolved into chloroform by this method.     

Protonation of polyaniline with lightly sulfonated polystyrene

Protonation of polyaniline base with lightly sulfonated polystyrene in polar solvents such as dimethyl sulfoxide and N-methyl-2-pyrrolidone was investigated by UV-Vis absorption spectra. As the molar ratio of sulfonated polystyrene/polyaniline increases, the conversion from polyaniline base form to salt form is observed owing to increased protonation. The isosbestic point clearly shows that quinoid unit and semiquinoid unit are in equilibrium. They are functions of the sulfonic acid concentration and solvent media.     

Preparation of highly sulfonated polystyrene model colloids

Previous attempts to prepare monodisperse styrene/sodium styrene sulfonate copolymer latexes by batch, seeded, and semicontinuous emulsion polymerization were unsuccessful at high concentrations of the functional comonomer. Broad, and sometimes bimodal, size distributions, and large amounts of water soluble homopolymer were obtained. After removal of free monomer, solute and adsorbed homopolymer and copolymer, the overall incorporation of the functional comonomer was found to be low. To overcome these problems, a two stage “shot-growth” or in situ seeding technique was developed. A first stage copolymerization was carried out with a low concentration of sodium styrene sulfonate: the purpose of the functional comonomer was to enhance the stability and regulate the size of the seed particles. When this reaction had reached high conversion (> 90%), a second stage monomer mixture was added. The ratio of styrene to sodium styrene sulfonate in this mixture determined the final surface charge density. The mechanism by which the NaSS is incorporated in the polymer particles is considered to be by solution copolymerization with solute styrene monomer to form surface active oligoradicals. These radicals adsorb on the particle surface, initiate polymerization and become inextricably bound, preventing their transfer back to the aqueous phase. By this means, it was possible to vary independently the particle size and surface charge density. High concentrations of functional comonomer could be polymerized without undue wastage (incorporations were only slightly less than 100%) or loss of monodispersity. In extreme cases, the area per functional group fell below the theoretical minimum, indicating considerable hydration of the surface layers.     

Spectral characteristics of CdS quantum dots and their associates with dye molecules dispersed in gelatin

A sol–gel method for the production of open quantum dots of CdS measuring 2-5 nm and their associates with dye molecules [methylene blue and the pyridinium salt of 3,3′-di(γ-sulfopropyl)-9-ethyl-4,5,4′,5′-dibenzothiacarbocyaninebetaine] dispersed in gelatin is described. Their spectral characteristics are analyzed. Evidence is obtained for the formation of hybrid associates of CdS quantum dots with monomers of the first and J-aggregates of the second dye.     

Fabrication of polystyrene–PbS core-shell and hollow PbS microspheres with sulfonated polystyrene templates

Uniform inorganic- (PbS) coated polymer core-shell and hollow PbS microspheres were prepared by an easy and economical approach. Monodisperse polystyrene (PS) microspheres were used as templates, as well as the core of the composite spheres; lead sulfide shells were obtained through the reaction of lead acetate (Pb(CH₃COO)₂) and thioacetamide (TAA) at room temperature. The morphologies and structures of the as-synthesized products were systematically characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectra (FTIR). The fluorescence property of the as-synthesized product was also investigated. A reasonable mechanism for the formation of PS–PbS core-shell and hollow PbS microspheres was discussed. According to a series of parallel experiments, effects of related experimental parameters were also carefully investigated, such as the molar ratio of Pb(CH₃COO)₂ to TAA, reaction temperature, etc.     

EXAFS analysis of plasticized zinc-neutralized sulfonated polystyrene ionomers

The interaction of several plasticizers with the zinc cation in zinc-neutralized sulfonated polystyrene was examined with extended x-ray absorption fine structure (EXAFS) spectroscopy. Glycerol and water were found to interact strongly with the zinc cation, plasticizing the ionic aggregates. At full solvation by glycerol, the zinc atom was found to be coordinated by three glycerol molecules. Dioctylphthalate, acetonitrile, and toluene, which are unable to coordinate to the zinc cation, were found to have a minimal effect on the cation's local structure.     

Synthesis and transport properties of proton-conducting membranes based on polyvinylidene fluoride films with introduced and sulfonated polystyrene

Thermal polymerization of styrene sorbed into a polyvinylidene fluoride (PVdF) film from a toluene solution followed by sulfonation of the resulting material was performed. The kinetics of polystyrene (PS) accumulation in the PVdF film during thermal polymerization was studied. Samples with 6–30 wt % PS and ∼100% PS sulfonation were obtained. Proton-exchange membranes wsith an ion-exchange capacity of up to 2 mg-eq/g and proton conductivity of up to 0.008 S/cm at 75% relative humidity were prepared. The permeability coefficients of water, methanol, and hydrogen and their dependences on the amount of introduced PS, ion-exchange capacity, and water uptake of membranes were measured. The synthesized materials proved similar to MF-4SK membranes in their basic transport characteristics and can be used as proton-exchange membranes in hydrogen-air and alcohol fuel cells.     

Proton mobility in hydrated sulfonated polystyrene: NMR and impedance studies

Different ionomers were obtained by sulfonation of a commercial polystyrene (PS), using acetyl sulfate as reagent. The sulfonation was assessed by FTIR and XPS spectroscopies and the thermal and mechanical properties were deduced from DMA measurements. The acid form of the ionomers was characterized by means of ¹H and ¹³C MAS-NMR spectroscopies. Polymer hydration under controlled humidity atmosphere was analyzed by gravimetric, NMR and complex impedance techniques. In the hydrated state, two stages associated with formation of hydronium (H₃O⁺) species and proton hopping between adsorbed water molecules were deduced from NMR data. Both processes are responsible for important changes detected in mechanical properties and conductivity of sulfonated polymers during hydration processes.     

Structure and dielectric relaxations of antibacterial sulfonated polystyrene and silver nanocomposites

Structure and dielectric relaxations of antibacterial sulfonated polystyrene (SPS) and silver nanocomposites (SPS/Ag) were investigated via broadband dielectric spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, differential scanning calorimetry, scanning electron microscopy, and wide‐angle X‐ray diffraction. SPS/Ag nanocomposites were prepared from SPS containing 2, 4, and 7 mol% of acid contents, followed by ion exchange and a reduction process. Silver nanoparticles were formed in the structural cavities of SPS films. The single glass transition temperature of the SPS copolymers was observed and increased with increasing acid contents and more enhanced with embedded silver nanoparticles because of the restriction of the polymer chain movement. The particle size of embedded silver nanoparticles was about 10 nm and well dispersed in SPS matrices. Four dielectric relaxations were observed above the glass transition temperature, and they were attributed to the fast segmental relaxation, the slow‐hindered segmental relaxation, relaxations associated with Maxwell–Wagner–Sillars interfacial polarization and electrode polarization. Weak local relaxations were observed due to the motion of sulfonated phenyl groups. Copyright © 2014 John Wiley & Sons, Ltd.     

Interaction of apo cytochrome c with sulfonated polystyrene nanoparticles

Stable nanoparticle dispersion in aqueous solutions was obtained with partially sulfonated polystyrene. The hydrophobic association of the backbone chains and phenyl groups is balanced by the electrostatic repulsion of the sulfonate groups on the particle surface. The size distribution of the sulfonated polystyrene particles in relation to concentration, degree of sulfonation and chain length, and pH was characterized by dynamic laser light-scattering. The structure and morphology of the particles were characterized with fluorescence and atom force microscopy. Highly sulfonated polystyrene particles can form large complex particles with positively charged protein, apo cytochrome c. Dynamic laser light-scattering and atom force microscopy studies show that the size and distribution of the complex particles depend on the relative amount of apo cytochrome c and sulfonated polystyrene. When sulfonated polystyrene is in excess, apo cytochrome c interacts with sulfonated polystyrene particles forming stable complexes and excessive sulfonated polystyrene particles bind to the periphery of the complexes preventing them from further aggregation. When apo cytochrome c is in excess, apo cytochrome c links the complexes forming much larger particles. Fluorescence study demonstrates that the hydrophobicity/hydrophility of the complex particles is relative to the ratio of apo cytochrome c and sulfonated polystyrene, degree of sulfonation, and pH. Apo cytochrome c not only can neutralize the negative charges on the surface of sulfonated polystyrene particles, but may also insert into the cores disrupting the original structure of sulfonated polystyrene particles.     

Effect of solvents on the cryogenic dynamic mechanical properties of polystyrene

Young's modulus and mechanical damping of 15 organic liquids in polystyrene have been measured from 4°K to 250°K. The concentration was generally in the range from 10 to 15%, but the polystyrene–toluene system was investigated over the range from 0 to 16%. Some liquids cause the 40°K damping peak of polystyrene to disappear, other liquids do not. Seven of the liquids which cause the disappearance of the 40°K peak give rise to new large damping peaks at the temperature expected for the secondary glass transition temperatures of the liquids, that is, at 0.77 T_g of the liquids. Some of the liquids produced large unexplained damping peaks at temperatures above the expected glass transition temperatures T_g of the liquids. It is suggested that the γ peak in polystyrene is caused by styrene monomer.     

Development of free radicals in sulfonated polystyrene ion-exchange resins upon drying

On exhaustive drying of sulfonated polystyrene-based ion-exchange resins, it is shown that free-radical centers develop. These have been examined by electron-spin resonance spectroscopy. The formation of the free radicals is largely reversible with respect to desorption and sorption of water which was measured by means of a quartz spiral microbalance. The spin-concentration isotherm as a function of sorbed water concentration is obtained. The presence of free radicals, dependent on water content in the resins, interferes with proton magnetic relaxation studies of hydration of ionized resins by providing a faster electron-spin coupled nuclear magnetic relaxation mechanism.     

Wetting behavior of lightly sulfonated polystyrene ionomers on silica surfaces

The wetting/dewetting behavior of thin films of lightly sulfonated low molecular weight polystyrene (SPS) ionomers spin-coated onto silica surfaces were studied using atomic force microscopy (AFM), contact angle measurements, and electron microscopy. The effects of the sulfonation level, the choice of the cation, the solvent used to spin-coat the films, and the molecular weight of the ionomer were investigated. Small angle X-ray scattering was used to determine the bulk microstructure of the films. The addition of the sulfonate groups suppressed the dewetting behavior of the PS above its glass transition temperature, e.g. no dewetting occurred even after 240 h of annealing at 120 degrees C. Increasing the sulfonation level led to more homogeneous and smoother surfaces. The choice of the cation used affected the wetting properties, but not in a predictable manner. When tetrahydrofuran (THF) or a THF/methanol mixed solvent was used for spin-casting, a submicron-textured surface morphology was produced, which may be a consequence of spinodal decomposition of the film surface during casting. Upon annealing for long times, the particles coalesced into a coherent, nonwetted film.