UV-light mediated decomposition of a polyester for enrichment and release of semiconducting carbon nanotubes

Purification of single-walled carbon nanotubes using conjugated polymers to selectively disperse either semiconducting or metallic nanotubes is effective and has received significant attention. However, the interaction between the conjugated polymer and the nanotube surface is very strong, making it difficult to remove the adsorbed polymer. Here, we report a poly(carbazole-co-terephthalate) polymer that is not only selective for semiconducting carbon nanotubes but can also be largely removed from the nanotube surface via irradiation with UV light. Irradiation of the polymer-nanotube dispersion causes degradation of ester linkages in the polymer backbone, effectively cutting the polymer into fragments that no longer bind strongly to the nanotube surface. Characterization of the electronic nature of the samples was carried out via the combination of absorption, Raman, and fluorescence spectroscopy. In addition, thermogravimetric analysis allowed determination of the amount of polymer left on the nanotube surface after irradiation and indicated that a large proportion of the polymer is removed. The reported methodology opens new possibilities for purification of semiconducting single-walled carbon nanotubes and their isolation from the polymeric dispersant.     

Probing the Selectivity of Azomethine Imine Cycloaddition to Single‐Walled Carbon Nanotubes by Resonance Raman Spectroscopy

Selective covalent surface modification of single‐walled carbon nanotubes (SWNTs) is of great importance to various carbon nanotube‐based applications as it might offer an alternative method for enriching metallic and semiconducting nanotubes. Herein, we report on the surface modification of SWNTs through 1,3‐dipolar cycloaddition of 3‐phenyl‐phthalazinium‐1‐olate, which is a stable and reactive azomethine imine. For this reaction, microwave heating was found to be more efficient than conventional and solvent‐free heating. The sensitivity of cycloaddition to the molecular structure of SWNTs was probed using resonance Raman spectroscopy with three different laser excitations. Based on the obtained results, azomethine imine addition to the surface of nanotubes is selective for metallic and large‐diameter semiconducting SWNTs. Thermogravimetric analysis coupled with mass spectrometry showed that fragments released at high temperatures corresponded to the phenylphthalazine group, thus confirming the covalent surface functionalization. Modified SWNTs were further characterized by X‐ray photoelectron and UV/Vis‐NIR spectroscopies.     

On the applicability of cluster models to study the chemical reactivity of carbon nanotubes

We have performed a comparative study on the reactivity of metallic and semiconducting nanotubes using infinite and finite models. Infinite models were created using periodic boundary conditions while finite ones were constructed by means of hydrogen terminated nanotubes sections. Cluster models systematically underestimate the reactivity of metallic single wall carbon nanotube (SWCNT)s. We have confirmed that metallic nanotubes are more reactive than semiconducting species, in disagreement with previous works. The differences can be attributed to the presence of an instability in the singlet ground state of the wavefunction corresponding to semiconducting nanotubes clusters. When lower electronic states of the pristine cluster are considered, semiconducting nanotubes become less reactive as compared with metallic SWCNTs. Particularly, if an antiferromagnetic solution is considered for the semiconducting (10,0) SWCNT cluster, it becomes less reactive than the (5,5) SWCNT, as observed for infinite models. Because semiconducting nanotubes are less reactive than metallic counterparts, their reaction energies converge faster to the values observed for graphene. For a 1.6-nm diameter semiconducting nanotube, the addition energy is comparable with graphene. Thus, semiconducting nanotubes with diameters larger than 1.6 nm are going to be as reactive as graphene and the effects of curvature will be unimportant.     

Charge transfer from metallic single-walled carbon nanotube sensor arrays

This paper explores the possibility of using arrays of metallic carbon nanotubes as sensors. Unlike their semiconducting counterparts, single-walled carbon nanotube arrays or networks that are dominated by metallic conduction pathways have not been investigated for their environmental sensitivity. In this work, we demonstrate transduction of molecular adsorption via charge transfer through predominantly metallic single-walled carbon nanotubes. Raman spectroscopy and electric field dependent transport confirm that signal transduction takes place through primarily large diameter metallic nanotubes. This unique signal transduction mechanism might have implications for novel sensors. The scaling of the signal with array impedance is well described using an irreversible binding model developed previously. The arrays have several advantages including a simple, two-electrode fabrication, rapid regeneration, and a responsivity that scales predictably and linearly with the number of adsorption sites. An array-assisted hydrolysis of reactive analytes is found to regenerate the nanotube surface from hydrolyzable species which include important organophosphate nerve agents.     

Electrical transport characteristics of surface-conductance-controlled, dielectrophoretically separated single-walled carbon nanotubes

Alternating current dielectrophoresis has attracted considerable attention as a possible candidate to separate single-walled carbon nanotubes according to electronic types. Recently, the significant effect of surface charge on the polarizability of semiconducting nanotubes was demonstrated using comparative Raman spectroscopic studies. Here we present electrical transport characteristics of surface-charge-controlled, dielectrophoretically deposited nanotube arrays. The surface charge was controlled using cationic/anionic surfactant mixtures. Complete separation between metallic and semiconducting species was achieved at the electric field frequency of 10 MHz only when the surface charge of nanotubes was neutralized, which is consistent with previous Raman investigation. A theoretical analysis, using zeta potential information as input, further supported the experimental observation.     

Influence of Polymer Electronics on Selective Dispersion of Single‐Walled Carbon Nanotubes

The separation and isolation of semiconducting and metallic single‐walled carbon nanotubes (SWNTs) on a large scale remains a barrier to many commercial applications. Selective extraction of semiconducting SWNTs by wrapping and dispersion with conjugated polymers has been demonstrated to be effective, but the structural parameters of conjugated polymers that dictate selectivity are poorly understood. Here, we report nanotube dispersions with a poly(fluorene‐co‐pyridine) copolymer and its cationic methylated derivative, and show that electron‐deficient conjugated π‐systems bias the dispersion selectivity toward metallic SWNTs. Differentiation of semiconducting and metallic SWNT populations was carried out by a combination of UV/Vis‐NIR absorption spectroscopy, Raman spectroscopy, fluorescence spectroscopy, and electrical conductivity measurements. These results provide new insight into the rational design of conjugated polymers for the selective dispersion of metallic SWNTs.     

Raman spectroscopy and imaging of ultralong carbon nanotubes

Raman spectroscopy and confocal Raman imaging with 514 nm excitation was performed on recently developed ultralong carbon nanotubes grown by the "fast-heating" chemical vapor deposition (CVD) method. The ultralong nanotubes are found to consist of both semiconducting and metallic types, with spectra that are consistent with the nanotubes being single walled. Characterization of nanotube diameters shows that short nanotubes appearing near the sample catalyst region have a broader distribution than is observed for the ultralong nanotubes. The narrow diameter distribution is determined by uniformity of catalyst particle size and gives additional evidence for the proposed "kite" mechanism for long nanotube growth. Raman imaging was performed over large length scales (up to 140 microm). Imaging reveals the ultralong nanotubes to be of high quality, with a very low defect density. Variations in G-band frequencies and intensity demonstrate the occurrence of minor structural changes and variations in nanotube-substrate interaction along the length of the nanotubes. Evidence also demonstrates that larger structural changes resulting in a full chirality change can occur in these nanotube types to produce a metal-to-semiconductor intramolecular junction.     

Preferential destruction of metallic single-walled carbon nanotubes by laser irradiation

Upon laser irradiation in air, metallic single-walled carbon nanotubes (SWNTs) in carbon nanotube thin film can be destroyed in preference to their semiconducting counterparts when the wavelength and power intensity of the irradiation are appropriate and the carbon nanotubes are not heavily bundled. Our method takes advantage of these two species' different rates of photolysis-assisted oxidation, creating the possibility of defining the semiconducting portions of carbon nanotube (CNT) networks using optical lithography, particularly when constructing all-CNT FETs (without metal electrodes) in the future.     

Effects of KI encapsulation in single-walled carbon nanotubes by Raman and optical absorption spectroscopy

The effect of KI encapsulation in narrow (HiPCO) single-walled carbon nanotubes is studied via Raman spectroscopy and optical absorption. The analysis of the data explores the interplay between strain and structural modifications, bond-length changes, charge transfer, and electronic density of states. KI encapsulation appears to be consistent with both charge transfer and strain that shrink both the C-C bonds and the overall nanotube along the axial direction. The charge transfer in larger semiconducting nanotubes is low and comparable with some cases of electrochemical doping, while optical transitions between pairs of singularities of the density of states are quenched for narrow metallic nanotubes. Stronger changes in the density of states occur in some energy ranges and are attributed to polarization van der Waals interactions caused by the ionic encapsulate. Unlike doping with other species, such as atoms and small molecules, encapsulation of inorganic compounds via the molten-phase route provides stable effects due to maximal occupation of the nanotube inner space.     

The effect of molecular weight on the separation of semiconducting single‐walled carbon nanotubes using poly(2,7‐carbazole)s

The use of selective interactions between conjugated polymers and single‐walled carbon nanotubes has emerged as a promising method for the separation of nanotubes by electronic type. Although much attention has been devoted to investigating polyfluorenes and their ability to disperse semiconducting carbon nanotubes under specific conditions, other polymer families, such as poly(2,7‐carbazole)s, have been relatively overlooked. Poly(2,7‐carbazole)s have been shown to also preferentially interact with semiconducting carbon nanotubes, however a detailed investigation of polymer parameters, such as molecular weight, has not been performed. We have prepared seven different molecular weights of a poly(2,7‐carbazole), from short chain oligomers to high molecular weight polymers, and have investigated their effectiveness at dispersing semiconducting single‐walled carbon nanotubes. Although all polymer chain lengths were able to efficiently exfoliate carbon nanotube bundles using a mild dispersion protocol, only polymers above a certain threshold molecular weight (M_n ～ 27 kDa) were found to exhibit complete selectivity for semiconducting nanotubes, with no observable signals from metallic species. Additionally, we found the quality of separation to be strongly dependent on the ratio of polymer to carbon nanotube. Contrary to previous reports, we have found that an excess of poly(2,7‐carbazole) leads to incomplete removal of metallic carbon nanotubes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2510–2516     

Selective polycarboxylation of semiconducting single-walled carbon nanotubes by reductive sidewall functionalization

The efficient and controllable synthesis, the detailed characterization, and the chemical postfunctionalization of polycarboxylated single-walled carbon nanotubes SWCNT(COOH)(n) are reported. This innovative covalent sidewall functionalization method is characterized by (a) the preservation of the integrity of the entire σ-framework of SWCNTs; (b) the possibility of achieving very high degrees of addition; (c) control of the functionalization degrees by the variation of the reaction conditions (reaction time, ultrasonic treatment, pressure); (d) the identification of conditions for the selective functionalization of semiconducting carbon nanotubes, leaving unfunctionalized metallic tubes behind; (e) the proof that the introduced carboxylic acid functionalities can serve as versatile anchor points for the coupling to functional molecules; and (f) the application of a subsequent thermal degradation step of the functionalized semiconducting tubes leaving behind intact metallic SWCNTs. Functional derivatives have been characterized in detail by means of Raman, UV-vis/nIR, IR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry, atomic force microscopy, and zeta-potential measurements.     

Spectroscopic Characteristics of Differently Produced Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) synthesized with different methods are investigated by using multiple characterization techniques, including Raman scattering, optical absorption, and X‐ray absorption near edge structure, along with X‐ray photoemission by following the total valence bands and C 1s core‐level spectra. Four different SWNT materials (produced by arc discharge, HiPco, laser ablation, and CoMoCat methods) contain nanotubes with diameters ranging from 0.7 to 2.8 nm. The diameter distribution and the composition of metallic and semiconducting tubes of the SWNT materials are strongly affected by the synthesis method. Similar sp² hybridization of carbon in the oxygenated SWNT structure can be found, but different surface functionalities are introduced while the tubes are processed. All the SWNTs demonstrate stronger plasmon resonance excitations and lower electron binding energy than graphite and multiwalled carbon nanotubes. These SWNT materials also exhibit different valence‐band X‐ray photoemission features, which are considerably affected by the nanotube diameter distribution and metallic/semiconducting composition.     

General rules for selective growth of enriched semiconducting single walled carbon nanotubes with water vapor as in situ etchant

The presence of metallic nanotubes in as-grown single walled carbon nanotubes (SWNTs) is the major bottleneck for their applications in field-effect transistors. Herein, we present a method to synthesize enriched, semiconducting nanotube arrays on quartz substrate. It was discovered that introducing appropriate amounts of water could effectively remove the metallic nanotubes and significantly enhance the density of SWNT arrays. More importantly, we proposed and confirmed that the high growth selectivity originates from the etching effect of water and the difference in the chemical reactivities of metallic and semiconducting nanotubes. Three important rules were summarized for achieving a high selectivity in growing semiconducting nanotubes by systematically investigating the relationship among water concentration, carbon feeding rate, and the percentage of semiconducting nanotubes in the produced SWNT arrays. Furthermore, these three rules can be applied to the growth of random SWNT networks on silicon wafers.     

Coaxial carbon nanotubes as shielded nanowires

We report transverse polarizabilities of coaxial carbon nanotubes using first principles density functional theory. These results demonstrate a shielding of the inner nanotube from electric fields by the outer nanotube. This study has implications for nanoelectronics, specifically for the possibility of using coaxial nanotubes as nanoelectrical wires. Shielding is predicted to be on the order of 95% by high-level polarizability calculations. This shielding occurs regardless of whether the outer nanotube is metallic or semiconducting. In addition, a series of calculations on coaxial nanotubes where the inner nanotube is not centered show that the shielding still occurs with approximately the same magnitude. These calculations therefore indicate that it would be possible to use a coaxial carbon nanotube as a shielded nanowire.     

Selective interactions of porphyrins with semiconducting single-walled carbon nanotubes

A derivatized porphyrin with long alkyl chains, 5,10,15,20-tetrakis(hexadecyloxyphenyl)-21H,23H-porphine, is selective toward semiconducting single-walled carbon nanotubes (SWNTs) in presumably noncovalent interactions, resulting in significantly enriched semiconducting SWNTs in the solubilized sample and predominantly metallic SWNTs in the residual solid sample according to Raman, near-IR absorption, and bulk conductivity characterizations.     

Dispersion of single‐walled carbon nanotubes using nucleobase‐containing poly(acrylamide) polymers

Single‐walled carbon nanotubes (SWNTs) possess extraordinary properties, but suffer from poor solubility and a lack of purity. Of the possible routes available to solubilize and purify nanotube samples, the use of noncovalent functionalization is ideal as carbon nanotube properties are not deleteriously affected. A multitude of different dispersants have been investigated thus far, but of particular interest is deoxyribonucleic acid (DNA), which has previously been demonstrated to effectively separate metallic and semiconducting carbon nanotubes. Here, we investigate the ability of synthetic nucleobase‐containing poly(acrylamide) polymers to produce stable nanotube dispersions in organic solvents. Polymers bearing different nucleobase and backbone structures, as well as block copolymers with different block sequences were investigated. Polymer:SWNT mass ratios and solvent compositions were optimized for the nucleobase‐functionalized polymers, and semiconducting and metallic SWNT populations were identified by a combination of UV‐Vis‐NIR absorption, Raman, and fluorescence spectroscopy. These results demonstrate the capacity for synthetic DNA analogues to disperse SWNTs in organic media. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2611–2617     

Spectroelectrochemistry of carbon nanostructures.

This review is focused on charge-transfer reactions at carbon nanotubes and fullerenes. The spectroelectrochemistry of fullerenes deals with the spin states of fullerenes, the role of mono-anions and the reactivity of higher charged states in C60. The optical (Vis-NIR) spectroelectrochemistry of single-walled carbon nanotubes (SWNTs) follows changes in the allowed optical transitions among the Van Hove singularities. The Raman spectroelectrochemistry of SWNT benefits from strong resonance enhancement of the Raman scattering. Here, both semiconducting and metallic SWNTs are analyzed using the radial breathing mode (RBM) and G-modes as well as the second order (D, G') and intermediate frequency modes. Raman spectroelectrochemistry of SWNT allows the addressing of index-identified tubes and even single isolated nanotubes. Optical and Raman spectroelectrochemistry of fullerene peapods, C60@SWNT and C70@SWNT indicates effective shielding of the intratubular fullerene (peas). The most striking effect in the spectroelectrochemistry of peapods is the so-called "anodic Raman enhancement" of intratubular C60. Double-walled carbon nanotubes (DWNTs) give a specific spectroscopic response in Vis-NIR spectroelectrochemistry for the inner and the outer tube. They are better distinguishable by Raman spectroelectrochemistry which allows a precise tracing of the specific doping response of outer/inner tubes.     

Finite-length models of carbon nanotubes based on Clar sextet theory

Finite-length models of metallic and semiconducting carbon nanotubes (CNTs) based on Clar sextet theory of aromatic systems are proposed. For metallic CNTs, the electronic properties of finite-length models converge monotonically to the values expected for quasi-monodimensional metallic systems. For semiconducting CNTs, the use of finite-length models as proposed in this work leads to a fast convergence of the electronic properties to the values expected for the corresponding infinite-length nanotube.     

Dimensional changes as a function of charge injection in single-walled carbon nanotubes

Motivated by the central importance of charge-induced dimensional changes for carbon nanotube electromechanical actuators, we here predict changes in nanotube length and diameter as a function of charge injection for armchair and zigzag nanotubes having different diameters. Density functional theory with periodic boundary conditions is used, which we show provides results consistent with experimental observations for intercalated graphites. Strain-versus-charge relationships are predicted from dimensional changes calculated with a uniform background charge ("jellium") for representing the counterions. These jellium calculations are consistent with presented calculations that include specific counterions for intercalated graphite, showing that hybridization between the ions and the graphite sheets is unimportant. The charge-strain relationships calculated with the jellium approximation for graphite and isolated single-walled nanotubes are asymmetric with respect to the sign of charge transfer. The dependence of nanotube strain on charge approaches that for a graphite sheet for intermediate-sized metallic nanotubes and for larger diameter semiconducting nanotubes. However, the strain-charge curves strongly depend on nanotube type when the nanotube diameter is small. This reflects both the dependence of the frontier orbitals for the semiconducting nanotubes on the nanotube type and the pi-sigma mixing when the nanotube diameter is small.