Oriented poly(3-hexylthiophene) nanofibril with the π-π stacking growth direction by solvent directional evaporation

In this article, the uniaxial alignment of poly(3-hexylthiophene) (P3HT) nanofibrils with a π-π stacking growth direction in which P3HT chains adopt a flat-on conformation was obtained by solvent directional evaporation using a glass cover slide and a poly(dimethylsiloxane) (PDMS) sheet to press the P3HT film in a carbon disulfide (CS(2)) atmosphere. By controlling the CS(2) vapor pressure during the film-forming process, we got a well-oriented P3HT film whose order parameter reached as high as 0.97. The orientation of the film was induced by the crystallization nucleation of P3HT and the directional evaporation of the solvent. Under a CS(2) vapor atmosphere, P3HT crystals preferred to adopt the form II modification, which started by nucleation. Owing to the solvent directional evaporation from the center to the margin, P3HT at the center of the sample would precipitate first to induce nucleation. Then the peripheral P3HT would directly diffuse, precipitate, and then adhere to the nucleus to form the uniaxial alignment of P3HT nanofibrils along the direction of solvent evaporation. Furthermore, in the P3HT nanofibrils, the π-π stacking direction of P3HT lamellae was parallel to the crystal growth direction, which would provide an effective path for charge transport.     

Ideal spread monolayer and multilayer formation of fully hydrophobic polythiophenes via liquid crystal hybridization on water

The spread monolayer formation of hydrophobic poly(3-alkylthiophene)s (P3ATs), regioregular poly(3-hexylthiophene) ( HT-P3HT), regioregular poly(3-dodecylthiophene) ( HT-P3DT), and regioirregular poly(3-hexylthiophene) ( RI-P3HT), were attained on the water surface via cospreading with a liquid-crystal molecule, 4'-pentyl-4-cyanobiphenyl (5CB). The spread monolayers were characterized by pi- A isotherms, Brewster angle microscopy (BAM), and atomic force microscopy (AFM). The molecular area for the cospread mixtures of P3ATs and 5CB expanded more than that of pure P3ATs as shown from the pi-A isotherms. BAM revealed that the mixed film forms the monomolecularly uniform and flat films on water. AFM elucidated that the spread monolayer of the hydrophobic P3ATs formed on the top of the 5CB monolayer on water with thicknesses of ca. 1.6 and ca. 2.6 nm for the two P3HTs and HT-P3DT, respectively. The P3AT/5CB hybrid monolayers could be fully transferred onto a solid substrate, and pure P3AT monolayers were obtained after volatilization of 5CB by gentle heating. The multilayer formation of pure P3AT monolayers was prepared by layer-by-layer deposition involving repeating horizontal deposition and successive volatilization of 5CB. Grazing angle incidence X-ray diffraction measurements showed that the lamella plane of the P3ATs is perfectly oriented parallel to the substrate plane in the resulting thin films. This shows a marked contrast with those obtained by spin casting using the identical polymer, where both in-plane and out-of-plane lamellae are involved. These thin films with perfectly controlled lamella orientation should be of great significance as the model system for evaluating the charge mobility for organic polymer electric devices.     

Siloxane-terminated solubilizing side chains: bringing conjugated polymer backbones closer and boosting hole mobilities in thin-film transistors

We introduce a novel siloxane-terminated solubilizing group and demonstrate its effectiveness as a side chain in an isoindigo-based conjugated polymer. An average hole mobility of 2.00 cm(2) V(-1) s(-1) (with a maximum mobility of 2.48 cm(2) V(-1) s(-1)), was obtained from solution-processed thin-film transistors, one of the highest mobilities reported to date. In contrast, the reference polymer with a branched alkyl side chain gave an average hole mobility of 0.30 cm(2) V(-1) s(-1) and a maximum mobility of 0.57 cm(2) V(-1) s(-1). This is largely explained by the polymer packing: our new polymer exhibited a π-π stacking distance of 3.58 ?, while the reference polymer showed a distance of 3.76 ?.     

Compositional dependence of the open-circuit voltage in ternary blend bulk heterojunction solar cells based on two donor polymers

Ternary blend bulk heterojunction (BHJ) solar cells containing as donor polymers two P3HT analogues, high-band-gap poly(3-hexylthiophene-co-3-(2-ethylhexyl)thiophene) (P3HT(75)-co-EHT(25)) and low-band-gap poly(3-hexylthiophene-thiophene-diketopyrrolopyrrole) (P3HTT-DPP-10%), with phenyl-C(61)-butyric acid methyl ester (PC(61)BM) as an acceptor were studied. When the ratio of the three components was varied, the open-circuit voltage (V(oc)) increased as the amount of P3HT(75)-co-EHT(25) increased. The dependence of V(oc) on the polymer composition for the ternary blend regime was linear when the overall polymer:fullerene ratio was optimized for each polymer:polymer ratio. Also, the short-circuit current densities (J(sc)) for the ternary blends were bettter than those of the binary blends because of complementary polymer absorption, as verified using external quantum efficiency measurements. High fill factors (FF) (>0.59) were achieved in all cases and are attributed to high charge-carrier mobilities in the ternary blends. As a result of the intermediate V(oc), increased J(sc) and high FF, the ternary blend BHJ solar cells showed power conversion efficiencies of up to 5.51%, exceeding those of the corresponding binary blends (3.16 and 5.07%). Importantly, this work shows that upon optimization of the overall polymer:fullerene ratio at each polymer:polymer ratio, high FF, regular variations in V(oc), and enhanced J(sc) are possible throughout the ternary blend composition regime. This adds to the growing evidence that the use of ternary blends is a general and effective strategy for producing efficient organic photovoltaics manufactured in a single active-layer processing step.     

Uniaxial alignment of poly(3-hexylthiophene) nanofibers by zone-casting approach

The preparation of large area coverage of films with uniaxially aligned poly(3-hexylthiophene)(P3HT) nanofibers by using zone-casting approach is reported.The length and the orientation of the nanofibers are defined by the solubility of the solvent,the P3HT molecular weight and the substrate temperature.The length of the oriented nanofibers could be increased from 1 μm to more than 10 μm by adding poor solvent into the P3HT solution.It is found that for P3HT of relatively low molecular weight,a solvent with relatively low solubility has to be chosen to get the oriented film.While for the high molecular weight P3HT,the solvent with a relatively high solubility has to be used.The well-aligned film could be obtained because of the solute concentration gradient in the region where the critical concentration is reached during the zone-casting process.Particularly,the solvent evaporation rate and crystallization rate must be chosen properly to satisfy the stationary conditions above,which were controlled by an appropriate choice of solvent and substrate temperature.The film prepared by zone-casting approach had microcrystalline P3HT domains with more inter-chain order than spin-coating film.Meanwhile,the P3HT π-π stacking direction was parallel to the alignment direction of the nanofibers.     

Optoelectronic Properties of Dicyanofluorene‐Based n‐Type Polymers

Three new donor–acceptor‐type copolymers ( P1 , P2 , P3 ) consisting of dicyanofluorene as acceptor and various donor moieties were designed and synthesized. Optoelectronic properties were studied in detail by means of UV‐visible absorption and fluorescence spectroscopy, cyclic voltammetry, space‐charge‐limited current (SCLC), flash‐photolysis time‐resolved microwave conductivity (FP‐TRMC), and density functional theory (DFT). All polymers showed strong absorption in the UV‐visible region and the absorption maximum undergoes redshift with an increasing number of thiophene units in the polymer backbone. SCLC analysis showed that the electron mobilities of the polymers in the bulk state were 1 to 2 orders higher than that of the corresponding hole mobilities, which indicated the n‐type nature of the materials. By using FP‐TRMC, the intrapolymer charge‐carrier mobility was assessed and compared with the interpolymer mobility obtained by SCLC. The polymers exhibited good electron‐accepting properties sufficiently high enough to oxidize the excited states of regioregular poly(3‐hexylthiophene) (P3HT (donor)), as evident from the FP‐TRMC analysis. The P3 polymer exhibited the highest FP‐TRMC transients in the pristine form as well as when blended with P3HT. Use of these polymers as n‐type materials in all‐polymer organic solar cells was also explored in combination with P3HT. In accordance with the TRMC results, P3 exhibited superior electron‐transport and photovoltaic properties to the other two polymers, which is explained by the distribution of the energy levels of the polymers by using DFT calculations.     

Comparable charge transport property based on S…S interactions with that of π-π stacking in a bis-fused tetrathiafulvalene compound

Compact molecular packing with short π-π stacking and large π-overlap in organic semiconductors is desirable for efficient charge transport and high carrier mobility.Thus charge transport anisotropy along different directions is commonly observed in organic semiconductors.Interestingly,in this article,we found that comparable charge transport property were achieved based on the single crystals of a bis-fused tetrathiafulvalene derivative(EM-TTP) compound along two interaction directions,that is,the multiple strong S…S intermolecular interactions and the π-π stacking direction,with the measured electrical conductivity and hole mobility of 0.4 S cm~(-1),0.94 cm~2 V~(-1) s~(-1) and 0.2 S cm~(-1),0.65 cm2 V~(-1) s~(-1),respectively.This finding provides us a new molecular design concept for developing novel organic semiconductors with isotropic charge transport property through the synergistic effect of multiple intermolecular interactions(such as S…S interactions) and π-π stacking.     

Effect of side-chain length on charge mobilities in neutral poly(3-alkylthiophene)s: Determination from dielectric measurement

For neutral poly(3-alkylthiophene)s (P3ATs), the electric modulus formalism of dielectric relaxation measurement together with the use of nonexponential decay function can be applied to describe the behavior of conductivity relaxation and carrier transport. The charge mobilities of neutral P3ATs calculated from conductivity relaxation with the use of the defect-diffusion model are in agreement with the data from field-effect transistor measurement. The temperature dependence of charge mobility exhibits a local maximum right after the end of glass transition region, which can be attributed to the transition of soft conformons in the disordered phase to localized conformons. The charge mobilities and activation energies of mobilities for P3ATs are dependent on conjugation length and volume fraction of conducting units. © 1994 John Wiley & Sons, Inc.     

Supramolecular assembly of graphene with functionalized poly(fluorene-alt-phenylene): the role of the anthraquinone pendant groups

Hybrid materials composed of graphene and conjugated poly(fluorene-alt-phenylene) endowed with redox-active anthraquinone moieties are prepared. Remarkable changes in the electronic properties of the polymer are observed. Effective interactions among the pendant anthraquinone and graphene, likely due to π-π stacking, are confirmed.     

Impact of side‐chain length on the phase structures of P3ATs and P3AT:PCBM films as revealed by SSNMR and FTIR

It is known that poly(3‐alkylthiophene) (P3AT) side‐chain length notably influences the photovoltaic performances of relating devices. However, comprehensively study on its impact on the structures of P3ATs and their blends with [6, 6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) is insufficient. By using solid‐state NMR and FTIR techniques, four P3ATs and their PCBM blends are investigated in this work, focusing on the phase structures as modulated by side‐chain length. Recently, we revealed multiple crystalline main‐chain packings of packing a and b together with a mesophase in poly(3‐butylthiophene) (P3BT) films (DOI: 10.1021/acs.macromol.6b01828). Here, the semicrystalline structures are investigated on poly(3‐hexylthiophene) (P3HT), poly(3‐octylthiophene) (P3OT), and poly(3‐dodecylthiophene) (P3DDT) with traditional form I modification, where packing a and the amorphous phase are probed. Furthermore, crystallized side chain within packing a is detected in both P3OT and P3DDT films, which shows a FTIR absorption at 806 cm⁻¹. Structural studies are also conducted on P3AT:PCBM blends. Compared with the pure P3ATs, the polymer crystallinities of the blends show reduction of about 40% for P3OT and P3DDT, whereas only about 10% for P3HT. Moreover, in P3BT:PCBM and P3HT:PCBM, the crystalline polymers and PCBM are phase separated, while in P3OT:PCBM and P3DDT:PCBM, blend components are mostly miscible. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 751–761     

Controlled aggregation in conjugated polymer nanoparticles via organic acid treatments

Understanding and controlling aggregation structures of conjugated polymers (CPs) in aqueous solutions is critical to improving the physical and photophysical properties of CPs for biological applications. Here, we present spectroscopic evidence, including nuclear magnetic resonance (NMR) spectroscopic results, that different organic acid treatment induces different aggregation structures and photophysical properties of CPs in water. Conjugated polymer nanoparticles (CPNs) were fabricated by treating a non-aqueous soluble, primary amine-containing poly(phenylene ethynylene) (PPE-NH(2)) with organic acids followed by dialysis. CPNs formed by acetic acid (AA) treatment (CPN-AAs) exhibit characteristics of loose aggregation with minimal π-π stacking, while CPNs formed by tartaric acid (TA) treatment (CPN-TAs) exhibit a high degree of π-π stacking among PPE-NH(2) chains. The controlled aggregation for a specific application was demonstrated by comparing the fluorescence quenching abilities of the CPN-AAs and the CPN-TAs. A doubled Stern-Volmer constant was obtained from the densely packed CPN-TAs compared to that of the loosely aggregated CPN-AAs.     

Enhance the performance of polymer solar cells via extension of the flanking end groups of fused ring acceptors

Two new fused ring electron acceptors(FREAs)IDT-IC-T and IDT-IC-B with thienyl or phenyl substituents at the terminal INCN unit are synthesized.Theoretical calculations indicate that the two acceptors dominantly favor an intermolecularπ-πstacking between the flanking terminal groups.The twist angle between the aryl substituent and INCN unit has a significant influence on theπ-πstacking distance of terminal unit.IDT-IC-T with a smaller twist angle has a shorterπ-πstacking distance than that of IDT-IC-B with a larger twist angle.In addition,extending the conjugation also affects the blend film morphology.IDT-IC-T and IDT-IC-B based photoactive films show appropriate nanoscale phase separations;whereas,blend films based on the parent compound IDT-IC show large-size acceptor domains.As expected,PBDB-T:IDT-IC-T blend films show higher and more balanced electron and hole mobilities.Moreover,these two acceptors present a good charge-transport connectivity arising from the extended conjugation and the increased intermolecular overlapping.Ultimately,IDT-IC-T demonstrates the highest electron mobility(1.47×10~(-4)cm~2V~(-1)s~(-1))and the best power conversion efficiency(PCE)of 9.43%.As for IDT-IC,which only shows an electron mobility of 7.33×10~(-5)cm~2V~(-1)s~(-1)and a PCE of 5.82%.These findings provide a facile and effective way to improve the photovoltaic performance.     

Relative substituent position on the strength of π-π stacking interactions

It was observed that the relative position of the arene substituents has a profound influence on the strength of π-π stacking in the 9-benzyl-substituted triptycene system. A new series of model compounds (3a-i) capable of revealing quantitatively π-π stacking interactions was studied. This series of compounds (3a-i) has an ortho-substituted methyl group in one of the two interacting arenes and the syn/anti ratios were determined and compared to a series previously studied compounds (4a-i) that have a para methyl group on the corresponding arene. A greater than 50% increase in the strength of π-π stacking interactions was observed with the methyl group in the ortho position comparing to that in the para position. No difference in π-π stacking interactions was observed when the other aromatic ring was a pentafluorobenzoate group.     

An Amorphous n-Type Conjugated Polymer with an Ultra-Rigid Planar Backbone

High charge carrier mobility polymer semiconductors are always semi-crystalline. Amorphous conjugated polymers represent another kind of polymer semiconductors with different charge transporting mechanism. Here we report the first near-amorphous n-type conjugated polymer with decent electron mobility, which features a remarkably rigid, straight and planar polymer backbone. The molecular design strategy is to copolymerize two fused-ring building blocks which are both electron-accepting, centrosymmetrical and planar. The polymer is the alternating copolymer of double B←N bridged bipyridine (BNBP) unit and benzobisthiazole (BBTz) unit. It shows a decent electron mobility of 0.34 cm² V⁻¹ s⁻¹ in organic field-effect transistors. The excellent electron transporting property of the polymer is possibly due to the ultrahigh backbone stiffness, small π-π stacking distance, and high molecular weight.     

以膦酰杂菲为侧基的1-戊炔聚合反应及其结构与热力学性质

以2-(6-氧化-6-氢-二苯基(c,e)<1,2>氧杂膦酰基)-1,4-二羟基苯(ODOPB)结构单元为中心,在两侧通过酯化反应分别引入4-(4-戊炔氧基)苯甲酰基和4-丁氧基苯甲酰基,得到了1-戊炔衍生物单体M-34,同时合成了不含9,10-二氢-9-氧杂-10-膦杂菲-10-氧化物(简称膦酰杂菲,DOPO)基元的M-34模型化合物M-0.分别以[Rh(nbd)Cl]2和Rh(nbd)B(C6H5)4为催化剂,研究了催化剂浓度和聚合时间对M-34和M-0聚合反应收率的影响.结果表明,由于DOPO存在较大π共轭结构和较强极性效应,降低了催化剂的活性,使得聚合产物P-34分子量较低,但改善了P-34的溶解性,并诱导P-34主链基本采取全反式构型,从而有利于增强侧基之间的相互作用,使这种含有DOPO的聚1-戊炔衍生物呈现良好的热稳定性,且优于其不含DOPO模型聚合物P-0的热稳定性.但同时DOPO的引入也增加侧基的体积,为链段运动提供了较大的自由体积,使得P-34的Tg低于不含DOPO模型聚合物P-0的Tg.     

Lamination method for the study of interfaces in polymeric thin film transistors

A method for the fabrication of polymeric thin-film transistors (TFTs) by lamination is described. Poly(dimethylsiloxane) stamps were used to delaminate thin films of semiconducting polymers from silicon wafers coated with a self-assembled monolayer (SAM) formed from octyltrichlorosilane. These supported films were laminated onto electrode structures to form coplanar TFTs. The fabrication process was used to make TFTs with poly(3-hexylthiophene), P3HT, and poly[5,5'-bis(3-dodecyl-2-thienyl)-2,2'-bithiophene], PQT-12. TFTs, where these polymers were laminated onto gate dielectrics coated with SAMs from octyltrichlorosilane, had effective field-effect mobilities of 0.03 and 0.005 cm2/(V s), respectively. TFTs where PQT-12 was laminated onto gate dielectrics that were not coated with a SAM also had mobility of 0.03 cm2/(V s). In contrast, TFTs fabricated by spin-coating PQT-12 onto the same structure had mobilities ranging from 10-3 to 10-4 cm2/(V s). These results suggest that the lower mobilities of polymer TFTs made with hydrophilic gate dielectrics are caused by molecular ordering in the semiconducting film rather than electronic effects of dipolar groups at the interface.     

Large open-circuit voltage polymer solar cells by poly(3-hexylthiophene) with multi-adducts fullerenes

Polymer solar cells (PSCs) made by poly(3-hexylthiophene) (P3HT) with multi-adducts fullerenes, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), PC61BM-bisadduct (bisPC61BM) and PC61BM-trisadduct (trisPC61BM), were reported. Electrochemistry studies indicated that PC61BM, bisPC61BM and trisPC61BM had step-up distributional lowest unoccupied molecular orbital (LUMO) energy. PSCs made by P3HT with above PC61BMs show a trend of enlarged open-circuit voltages, which is in good agreement with the energy difference between the LUMO of PC61BMs and the HOMO of P3HT. On the contrary, reduced short-circuit currents (Jsc) were observed. The investigation of photo responsibility, dynamics analysis based on photo-induced absorption of composite films, P3HT:PC61BMs and n-channel thin film field-effect transistors of PC61BMs suggested that the short polaron lifetimes and low carrier mobilities were response for reduced Jsc. All these results demonstrated that it was important to develop an electron acceptor which has both high carrier mobility, and good compatibility with the electron donor conjugated polymer for approaching high performance PSCs.     

Tetrathienoanthracene-based copolymers for efficient solar cells

A series of semiconducting copolymers (PTAT-x) containing extended π-conjugated tetrathienoanthracene units have been synthesized. It was shown that the extended conjugation system enhanced the π-π stacking in the polymer/PC(61)BM blend films and facilitated the charge transport in heterojunction solar cell devices. After structural fine-tuning, the polymer with bulky 2-butyloctyl side chains (PTAT-3) exhibited a PCE of 5.6% when it was blended with PC(61)BM.     

Synthesis and Crystal Structure of a Coordination Polymer [Zn（p-pdoa）（bbp）]n with a One-dimensional Helical Chain

The coordination polymer [Zn（p-pdoa）4（bbp）]n 1 （p-pdoa = p-phenylenedioxydiacetate dianion and bbp = 2,6-bis（benzimidazol-2-yl）pyridine） has been synthesized by hydrothermal method and characterized by elemental analysis, IR and X-ray single-crystal diffraction. The title complex crystallizes in the triclinic system, space group P1^- with a = 7.8383（2）, b = 12.6610（4）, c = 13.1792（5）A, a = 84.433（2）,β = 74.2980（1）, γ = 87.4290（1）°, V = 1252.93（7）A^3, Z = 2, Dc = 1.593 g/cm^3,/z = 1.038 mm^-1, F（000） = 616, the final R = 0.0361 and wR = 0.1139. The Zn（Ⅱ） atom assumes a distorted trigonal bipyramidal geometry, involving two carboxyl O atoms from two different p-pdoa ligands and three N atoms from the bbp ligand. The Zn（Ⅱ） atom is alternately interlinked by p-pdoa ligands in a bismonodentate mode into a helical chain with a long pitch of 12.661 A and the adjacent Zn…Zn distance of 11.056 and 12.245 A. There exists a 2D supramolecular framework linked by π-π stacking （3.312 A） between adjacent benzimidazoles of bbp ligands and intermolecular hydrogen-bonding interactions between the uncoordinated carboxylate oxygen atoms （O（2）, 0（5）） and the uncoordinated imidazolyl N atoms （N…O distances 2.706 and 2.786 A）. There also exist two interlayer π-π stacking interactions of 3.299 A between adjacent central pyridines of bbp ligand and 3.176 A between the phenyl groups of p-pdoa ligand. Such π-π stacking interactions extend the two-dimensional layers into a 3D supramolecular network.     

High performance single-crystal field-effect transistors based on twisted polyaromatic semiconductor pyreno[4,5-a]coronene

A novel p-channel semiconductor pyreno[4,5-a]coronene has been synthesized and characterized. The highly fused π-conjugated framework has a twisted geometry with an excellent on-top cofacial π-π stacking in the crystal structure and with a centroid-to-centroid distance of 3.808 ?. Single-crystal field effect transistors based on the molecule exhibit a high mobility of ~0.89 cm(2) V(-1) s(-1) and an on/off ratio of ~6 × 10(4).