Determination of ochratoxin A in wine by liquid chromatography tandem mass spectrometry after combined anion-exchange/reversed-phase clean-up

Ochratoxin A (OTA) is a mycotoxin produced by Aspergillus ochraceus and Penicillium verrucosum. It has been found and analysed in several foods and feeds. Owing to its toxicity and occurrence in food and feed, the European Community has issued directives and some countries have their own regulations for OTA contents in food, feed and beverages. This work describes a method for the determination of OTA in mulled and red wine. It is based on combined anion exchange/reversed-phase clean-up and was analysed by liquid chromatography coupled with tandem mass spectrometry (multiple reaction monitoring). The method was validated with natural contaminated and spiked wine samples with OTA contents from 1.34 to 3.48 g kg^–1. Owing to its accuracy, good reproducibility and repeatability, this easy method is a good alternative to liquid chromatography–fluorescence detection methods.     

Occurrence of ochratoxin A in Turkish wines

A total of 95 wine samples including 34 white, 10 rosé and 51 red wines originating from four different Turkish areas were analysed for ochratoxin A (OTA). An analytical method based on immunoaffinity column (IAC) for clean-up and high performance liquid chromatography with fluorescence detection (HPLC-FD) was used to determine OTA in wines. The limit of detection (LOD) was estimated as 0.006 ng ml^− 1 for white wine and 0.010 ng ml^− 1 for rosé and red wines. The limit of quantification (LOQ) was estimated as 0.020 ng ml^− 1 in white wine and 0.030 ng ml^− 1 in rosé and red wines. Recovery experiments were carried out with spiked samples in the range 0.1–1 ng ml^− 1 of OTA. The average OTA recoveries from spiked white wine samples varied from 79.43% to 85.07%; while the mean recoveries for rosé and red wine samples were in the range of 77.48–83.96% and 76.61–83.55%, respectively. OTA was detected in 82 (86%) wine samples at levels of < 0.006–0.815 ng ml^− 1, which were below the maximum allowable limit established by the European Community. The mean OTA concentration in red wines was slightly higher than in white and rosé wines. Furthermore, our data indicate that the geographic region of origin has strong influence on OTA level for white, rosé and red wines: wines originating from Thrace (n = 44, mean = 0.158 ng ml^− 1) and Aegean (n = 28, mean = 0.060 ng ml^− 1) regions of Turkey were more contaminated with OTA compared with wines originating from central (n = 15, mean = 0.027 ng ml⁻¹) and east Anatolia (n = 8, mean = 0.027 ng ml^− 1) areas. This study showed that the occurrence of OTA in Turkish wines is high, but at levels that probably leads to a non-significant human exposure to OTA by consumption of wines.     

Non-instrumental immunochemical tests for rapid ochratoxin A detection in red wine

Gel-based and membrane-based flow-through immunoassay formats were investigated for rapid ochratoxin A (OTA) detection in red wine. The flow-through set-up consisted of an antibody containing gel or membrane placed at the bottom of a standard solid-phase extraction column (i.e. the flow-through column), combined with a clean-up column. Different clean-up methods were studied for red wine clarification and purification. The optimal method consisted of passing wine, diluted with an aqueous solution containing 1% polyethylene glycol (PEG 6000) and 5% sodium hydrogencarbonate, through strong anion exchange (SAX) silica. An immunoassay for OTA detection in red wine was optimized and a cut-off level at 2 μg L⁻¹ according to EU legislation was achieved with both formats. A more significant colour difference between blank and spiked samples was observed for the gel-based assay making this superior to the membrane-based assay. The proposed rapid gel-based test was compared with a standard immunoaffinity column - high-performance liquid chromatography - fluorescent detection (IAC-HPLC-FLD) method and a good correlation of the results was obtained for naturally contaminated wine samples.     

Combined use of supported liquid membrane and solid-phase extraction to enhance selectivity and sensitivity in capillary electrophoresis for the determination of ochratoxin A in wine

This paper proposes a novel strategy to enhance selectivity and sensitivity in CE, using supported liquid membrane (SLM) and off-line SPE simultaneously. The determination of ochratoxin A (OA) in wine has been used to demonstrate the potential of this methodology. In the SLM step, the donor phase (either a 20 mL volume of a standard solution at pH 1 or a wine sample at pH 8) was placed in a vial, where a micromembrane extraction unit accommodating the acceptor phase (1 mL water, pH 11) in its lumen was immersed. The SLM was constructed by impregnating a porous Fluoropore Teflon (PTFE) membrane with a water-immiscible organic solvent (octanol). In the off-line SPE step, the nonpolar sorbent (C-18, 4 mg) selectively retained the target ochratoxin, enabling small volumes of acceptor phase (1 mL) to be introduced. The captured analytes were eluted in a small volume of methanol (0.1 mL). This procedure resulted in sample cleanup and concentration enhancement. The method was evaluated for accuracy and precision, and its RSD found to be 5%. The LODs for OA in the standard solutions and wine samples were 0.5 and 30 microg/L, respectively. The results obtained demonstrate that SLM combined with off-line is a good alternative to the use of immunoaffinity columns prior to CE analysis.     

Aptamer-targeted magnetic nanospheres as a solid-phase extraction sorbent for determination of ochratoxin A in food samples

A sorbent based on the aptamer for ochratoxin A was immobilized onto magnetic nanospheres (MNS) and used to develop a magnetic solid-phase extraction procedure to clean up food samples in conjunction with high-performance liquid chromatography separation and fluorescence detection. Specific retention of ochratoxin A by the sorbent was demonstrated, and the capacity of the MNS-aptamer sorbent was determined. The efficacy of this new approach was successfully evaluated through comparison with solid-phase extraction on commercial C18 cartridge. Several different food samples fortified in the range of with 2.5-50 μg/kg yielded mean recoveries from 67% to 90%, respectively. Finally, this oligosorbent was applied to the selective extraction of ochratoxin A from unfortified food samples.     

Evolution of ochratoxin A content from must to wine in Port Wine microvinification

To study the evolution of ochratoxin A (OTA) content from must to wine during the making of Port Wine, grapes from the five most common varieties of Port Wine were harvested and combined in equal percentages in order to perform microvinifications. Three sets of assays were studied: a blank (A), where the most common Port Wine-making process was used; in the second (B), a solution of OTA was added to the initial must; in the third (C), the grapes were aspersed with an inoculating solution of OTA-producing fungi. Samples were collected, in duplicate, on four different occasions throughout the process. The influence of the addition of SO₂ to the must was also assessed in each set. The quantification of OTA was based on the standard reference method for wines (European Standard prEN 14133), which includes clean-up via immunoaffinity columns and HPLC with fluorescence detection. The limits of detection were 0.076 g/l for wine and 0.114 g/l for must. The method was validated by assessing the precision, accuracy and by obtaining an estimate of the global uncertainty. Overall, the levels of OTA observed during the vinifications dropped by up to 92%, and no grapes used in this work were contaminated naturally.     

Determination of ochratoxin A in wine using liquid-phase microextraction combined with liquid chromatography with fluorescence detection

A liquid-liquid microextraction technique (LPME) has been applied to the extraction of ochratoxin A (OTA) from wine prior to its quantification by HPLC-fluorescence detection. OTA was extracted from wine, through 1-octanol immobilized in the pores of a porous hollow fiber, and introduced into 1-octanol inside the fiber. Recovery was 77%. The method was adequate for quantification of OTA in wine at levels within the range 0.25-10 ng/ml with a LOD of 0.2 ng/ml, and can be a simple and inexpensive alternative to the use of inmunoaffinity columns in order to quantify OTA levels in wine.     

Correlation between different clean-up methods and analytical techniques performances to detect Ochratoxin A in wine

Three different clean-up methods and two analytical techniques were compared to determine Ochratoxin A (OTA) in wines. The first clean-up used a MycoSep column, the second an immunoaffinity column (IAC) and the third consisted in a liquid-liquid extraction (LLE) using dichloromethane in acid conditions. Meanwhile, two different OTA determination techniques were also evaluated: a HPLC analysis using a fluorescence detector and an enzyme-linked immunosorbent assays (ELISA) method.Correlations between clean-up methods and analytical techniques to determine OTA in wine were made evaluating linearity, accuracy and precision.Both the two first clean-up methods (solid-phase extraction, SPE) showed a good linear fit (r² = about 0.9999), followed by LLE. The use of immunoaffinity columns showed the best recoveries, even if also the SPE with MycoSep showed good recoveries while the LLE recoveries were the worst ones. The HPLC analysis showed good precision and accuracy, while ELISA method, even with a sufficient linearity, generally underestimated OTA content in wines.     

Comparison of off- and in-line solid-phase extraction for enhancing sensitivity in capillary electrophoresis using ochratoxin as a model compound

This paper proposes and compares two approaches based on off- and in-line solid-phase extraction (SPE), intended to enhance sensitivity in capillary electrophoresis with ultraviolet detection (CE-UV) using as a model the determination of ochratoxin A (OA) in river water samples. In the off-line SPE mode, the reversed-phase sorbent (octadecilsylane, C₁₈) selectively retains the target analyte (OA) and allows large volumes of the sample (70 mL) to be introduced and subsequently eluted in a small volume (0.1 mL) of an appropriate solution. In the in-line SPE mode, a custom-made microcartridge is inserted near the inlet of the capillary, which is filled with the same C₁₈ sorbent. This solid phase selectively retains OA present in a sample volume as low as approximately 640 μL for subsequent elution with ca. 135 nL of an appropriate eluent. The limit of detection (LOD) obtained with the in-line SPE method was 1 ng L^-1, which is 3 orders of magnitude lower than that obtained with CE-UV and roughly 1 order lower than that provided by the off-line SPE-CE-UV method.     

Determination of ochratoxin A in wine grapes: comparison of extraction procedures and method validation

A method for determination of ochratoxin A (OTA) in wine grapes is described, using extraction with a hydrogen carbonate and polyethylene glycol (PEG) solution (5% NaHCO₃ and 1% PEG 8000), followed by immunoaffinity clean-up and liquid chromatography with fluorescence detection. Validation was made with spiked samples, in levels of 0.05 and 1 μg kg⁻¹, with average recovery rates of 76% and relative standard deviations in repeatability and intermediate precision conditions of 8 and 12%, respectively. The limit of detection and limit of quantification in grapes were established at 0.004 and 0.007 μg kg⁻¹, respectively. To evaluate further the accuracy and efficiency of this method, naturally contaminated grapes were also analysed by another method that involves extraction with acidified methanol, at levels ranging from 0.05 to 37 μg kg⁻¹, and the results compared. A good correlation (r=0.9996) was found, with better performances in terms of precision for the new method. A survey was conducted on wine grapes from 11 Portuguese vineyards, during the harvest of 2002, using the proposed method. OTA was detected in three out of the 11 samples, at levels ranging from 0.035 to 0.061 μg kg⁻¹.The new method meets all the criteria of the European Commission directive 2002/26/CE, that lays down the sampling and the analysis methods for the official control of OTA levels in foodstuffs. It is reliable for low levels of contamination (ng kg⁻¹), and avoids the use of organic solvents in the extraction step.     

Validation of a liquid chromatography method for the simultaneous quantification of ochratoxin A and its analogues in red wines

A validated high-performance liquid chromatography (HPLC) method with fluorescence detection for the simultaneous quantification of ochratoxin A (OTA) and its analogues (ochratoxin B (OTB), ochratoxin C (OTC) and methyl ochratoxin A (MeOTA)) in red wine at trace levels is described. Before their analysis by HPLC-FLD, ochratoxins were extracted and purified with immunoaffinity columns from 50 mL of red wine at pH 7.2. Validation of the analytical method was based on the following parameters: selectivity, linearity, robustness, limits of detection and quantification, precision (within-day and between-day variability), recovery and stability. The limits of detection (LOD) in red wine were established at 0.16, 0.32, 0.27 and 0.17 ng L(-1) for OTA, OTB, MeOTA and OTC, respectively. The limit of quantification (LOQ) was established as 0.50 ng L(-1) for all of the ochratoxins. The LOD and LOQ obtained are the lowest found for OTA in the reference literature up to now. Recovery values were 93.5, 81.7, 76.0 and 73.4% for OTA, OTB, MeOTA and OTC, respectively. For the first time, this validated method permits the investigation of the co-occurrence of ochratoxins A, B, C and methyl ochratoxin A in 20 red wine samples from Spain.     

Ochratoxin A survey in Portuguese wine by LC-FD with direct injection

Wine and grape juices were identified as one of the most important sources of ochratoxin A (OTA), a mycotoxin with diverse toxic effects that naturally appears in food and foodstuffs all over the world.The aim of this study was to assess the OTA levels in Portuguese wines through the application of a simple and accurate method based on liquid chromatography (LC) with direct injection, followed by fluorescence detection (FD).Randomly selected wine samples were used to evaluate the performance of direct injection as efficient, fast, inexpensive and safe sample preparation method. The proposed method was successfully validated. The limit of quantification (LOQ) was 1.0 μg/L and OTA recoveries from wine samples, spiked at the three fortification levels, were higher than 85.4%, with RSDs lower than 9.6% for both red and white wines. The presence of OTA was confirmed by methyl ester derivatization followed by LC analysis.Data on OTA levels were obtained for 60 Portuguese red and white wine samples. OTA was found in 12 samples, nine (26%) red wine samples and three (12%) white wine samples. Only one red wine sample and one white wine sample presented a contamination level above the LOQ, with 1.23 and 2.4 μg/L, respectively. It should be pointed out that this white wine sample exceeded the EC maximum permitted level of 2.0 μg/L. The safe dose established as 120 ng/kg body weight/week was not exceeded by the weekly intake estimated for the samples contaminated above the LOQ.     

A normal phase HPTLC method for the quantitative determination of ochratoxin A in rice

Summary A previously published [1] liquid chromatographic method for the determination of ochratoxin A in corn, barley and kidney has been modified for application to parboiled rice with quantification by high performance thin layer chromatography (HPTLC). The method has been validated by spiking uncontaminated extracts of rice with ochratoxin A over the range 0 to 198 g kg^–1. The proposed method has some significant advantages over the current AOAC method [2], especially for determining low levels of ochratoxin A in parboiled rice.     

Validation of two analytical methods for the determination of ochratoxin A by reversed-phased high-performance liquid chromatography coupled to fluorescence detection in musts and sweet wines from Andalusia

Some Spanish sweet wines are made from raisins, grapes dried by direct exposure to the sun after picking. This drying process can encourage ochratoxin A (OTA) formation. OTA is a mycotoxin formed by several fungi. It has been linked to nephropathy in humans, and may have a long half-life in humans. The aim of this study is to develop and to apply two procedures for the analysis of OTA in grape musts (during the raisining process) and sweet wines, respectively. Reversed-phase high-performance liquid chromatography (RP-HPLC) coupled to fluorescence detection (FLD) was employed in both analytical methods. In grape must, the method involves the direct injection of the sample in a HPLC-FLD system without any kind of prior clean-up procedure. The complexity of the sweet wine samples requires a solid-phase extraction (SPE) clean-up on a C18 column which enables the OTA to be isolated from the matrix. The methods used were statistically validated. The validation also included the comparison of the slopes of the curve obtained with standards and the regression curves obtained by the addition of a standard. Two different studies of standard additions were conducted. One method was validated without sample preparation and it was applied to must samples. The other method was validated with SPE extraction and it was applied to sweet wine samples. Recovery was always better than 89.69%. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were established at 0.22 and 0.77 μg l⁻¹, respectively. In general, the analytical data obtained provided good results at the sub-μg l⁻¹ concentration level.     

The comparison of two clean-up procedures, multifunctional column and immunoaffinity column, for HPLC determination of ochratoxin A in cereals, raisins and green coffee beans

To evaluate a clean-up method of detecting ochratoxin A (OTA) by HPLC, the performances of two different clean-up columns, an immunoaffinity column and a multifuntional column were compared in an inter-laboratory study. As samples, un-contaminated wheat, corn grits, green coffee beans and naturally contaminated raisins were used. The recovery test was performed at two different concentrations of OTA (0.5 and 5.0 μg/kg) except for naturally contaminated raisins. Using the immunoaffinity column, the recovery rates, and relative standard deviations for repeatability (R.S.D._r) and reproducibility (R.S.D._R) for wheat, corn grits and green coffee beans ranged 59.0-85.8, 4.2-7.8 and 22.9-29.2%, respectively. For naturally contaminated raisins, recovery, R.S.D._r and R.S.D._R were 84.1, 1.8 and 5.1%, respectively. Using the multifunctional column, the recovery rates, R.S.D._r and R.S.D._R for wheat, corn grits and green coffee beans ranged 80.8-185.0, 0.7-6.9 and 15.2-33.9%, respectively. For naturally contaminated raisins, the recovery, R.S.D._r and R.S.D._R were 128.7, 1.1 and 3.7%, respectively. The results suggest that a multifunctional column could be used to detect OTA in wheat and corn grits at a concentration as low as 0.5 μg/kg; however, it was difficult to detect OTA in green coffee beans and raisins at such a low level. Although an immunoaffinity column could be used for all the test samples in this study from a low level to a high level, the recovery rates were lower than with a multifunctional column.     

Development of the custom polymeric materials specific for aflatoxin B1 and ochratoxin A for application with the ToxiQuant T1 sensor tool

Two polymers were computationally designed with affinity to two of the most abundant mycotoxins aflatoxin B1 (AFB1) and ochratoxin A (OTA) for application in the ToxiQuant T1 System. The principle of quantification of AFB1 and OTA using the ToxiQuant T1 instrument comprised of a fluorimetric analysis of mycotoxins adsorbed on the polymer upon exposure to UV light. High affinity of the developed resins allowed the adsorption of both toxins as discrete bands on the top of the cartridge with detection limit as low as 1 ng quantity of mycotoxins.     

Exposure assessment to ochratoxin A from the consumption of Italian and Hungarian wines

A total of 267 wine samples including 19 dessert, 186 red, 11 rosé and 51 white produced mostly in the years 1997–2002 in Italian and Hungarian regions were analyzed for ochratoxin A (OTA) using inmunoaffinity column (IAC) clean-up and HPLC with fluorimetric detection. None of Hungarian wine samples were contaminated with this mycotoxin. For Italian red wines, 84% of the samples were positive for OTA ranged from 0.01 to 4.00 ng/mL. Furthermore, OTA was detected in 63% of dessert, in 56% of rosé and in 19% of white wine samples ranged from 0.01 to 1.64, from 0.01 to 1.04 and from 0.01 to 0.21 ng/mL, respectively. A study of OTA daily exposure assessment in Italian wines was also carried out outlining a quite low contribution to the overall daily intake.     

Sorptive extraction with in-sample acetylation for gas chromatography-mass spectrometry determination of ethylphenol species in wine samples

An inexpensive and effective sample preparation procedure for the determination of three ethylphenolic off-flavours (4-ethylphenol, 4-ethylguaiacol and 4-ethylcathecol) in wine samples is presented. Analytes were in situ acetylated and concentrated using a disposable silicone sorbent (DSS) exposed to the diluted sample. After that, the analytes were recovered with ethyl acetate and determined by gas chromatography with mass spectrometry. The influence of different parameters (volume of acetic anhydride, basic catalyst, ionic strength, sorbent format, sampling mode and extraction time) on the efficiency of derivatization and extraction steps is discussed. Under optimized conditions, 2 mL of wine were diluted with 15 mL of an aqueous solution of potassium bicarbonate (5%, m/v) in a 22 mL vessel, containing 2 g of sodium chloride. The volume of acetic anhydride and the extraction time were set at 90 μL and 2 h, and the extraction was carried out at room temperature (20±2°C). Analytes were concentrated using a silicone disc (5 mm diameter × 0.5 mm thickness) and further desorbed with 0.2 mL of ethyl acetate. The achieved limits of quantification (LOQs), defined as the concentration of each compound providing a signal 10 times higher than the baseline noise, stayed between 5 and 15 ng mL(-1). The method provided a linear response range of up to 5000 ng mL(-1) and relative recoveries from 91% to 116%. The 4-ethylphenol off-flavour was detected in most red wine samples at concentrations of up to 2700 ng mL(-1).     

Modified magnetic nanoparticles in an electrochemical method for the ochratoxin A determination in Vitis vinifera red grapes tissues

This work described the development and characterization of an electrochemical method using square wave voltammetry (SWV) combined with the use of modified magnetic nanoparticles (MNPs), which had shown a rapid and sensitive determination of ochratoxin A (OTA) in wine grapes (Cabernet Sauvignon, Malbec and Syrah) post-harvest tissues. The wine grapes were inoculated with Aspergillus ochraceus to obtain OTA in artificially infected samples. The OTA was directly determined using square-wave voltammetry. The current obtained is directly proportional to the concentration of OTA present in the samples. This method has been used for OTA determination in wine grapes and it was validated against a commercial ELISA test kit. The limits of detection calculated for electrochemical detection and the ELISA were 0.02 and 1.9 μg kg⁻¹, respectively and the coefficients of variation for accuracy and precision dates were below 5.5%. This method promises to be suitable for the detection and quantification of OTA in apparently healthy fruits post-harvest for assuring safety and quality of food as well as consumer's health.     

Supramolecular solvent-based microextraction of ochratoxin A in raw wheat prior to liquid chromatography-fluorescence determination

A supramolecular solvent made up of reverse micelles of decanoic acid, dispersed in a continuous phase of THF:water, was proposed for the simple, fast and efficient microextraction of OTA in wheat prior to liquid chromatography-fluorescence determination. The method involved the stirring of 300 mg-wheat subsamples (particle size 50 μm) and 350 μL of supramolecular solvent for 15 min, subsequent centrifugation for 15 min and the direct quantitation of OTA in the extract, previous 5.7-fold dilution with ethanol/water/acetic acid (49.5/49.5/1), against solvent-based calibration curves. No clean-up of the extracts or solvent evaporation was needed. Interactions between the supramolecular solvent and major matrix components in the wheat (i.e. carbohydrates, lipids and proteins) were investigated. The reverse micelles in the extractant induced gluten flocculation but only in the coacervation region of lower analytical interest (i.e. at percentages of THF above 11%). The quantitation of OTA was interference-free. Representativity of the 300 mg-wheat subsamples was proved by analysing a reference material. OTA recoveries in wheat ranged between 84% and 95% and the precision of the method, expressed as relative standard deviation, was 2%. The quantitation limit of the method was 1.5 μg kg⁻¹ and was below the threshold limit established for OTA in raw cereals by EU directives (5.0 μg kg⁻¹). The method developed was validated by using a certified reference material and it was successfully applied to the determination of OTA in different wheat varieties from crops harvested in the South of Spain. OTA was not detected in any of the analysed samples. This method allows quick and simple microextraction of OTA with minimal solvent consumption, while delivering accurate and precise data.