Glassy carbon paste electrodes

A new carbon composite electrode material, based on mixing glassy carbon (GC) microparticles with an organic pasting liquid is described. The resulting glassy carbon paste electrode (GCPE) combines the electrochemical properties of GC with the various advantages of composite electrodes. Glassy carbon pastes (GCPs) offer high electrochemical reactivity, a wide accessible potential window, a low background current, and are inexpensive, easy to prepare, modify, and renew. The new material has a lower double-layer capacitance and a higher heterogeneous rate constant (for ferricyanide) compared to conventional carbon pastes (CPs). Scanning electron microscopy (SEM) images indicate significant differences in the structure of GCPE and carbon paste electrode (CPE). Factors influencing the electrode kinetics of GCPE surfaces are discussed. The electrochemical properties and advantages of GCPE should be of broad utility in electroanalysis.     

Determination of Carbendazim by Adsorptive Stripping Differential Pulse Voltammetry Employing Glassy Carbon Paste Electrode Modified with Graphene and Amberlite XAD 2 Resin

Graphene nanosheets (GNS) and amberlite XAD‐2 (XAD2) modified glassy carbon paste electrode (GNS‐XAD2‐GCPE) were fabricated for voltammetric determination of Carbendazim (MBC). GNS was synthesized by Hummer’s method and characterized by SEM, EDAX, and XRD techniques. After optimizing the analytical conditions in 0.4 M citrate buffer (pH 4.0), the peak current was found to be linear in the range of 8.36×10^?9 to 4.13×10^?6 M (r=0.9986) with detection limit of 3.14×10^?9 M (S/N=3) by AdSDPV. The method was validated for the determination of MBC in soil, fruit, blood serum, urine, waste and ground water samples with satisfactory recoveries.     

Dopamine and Glucose Sensors Based on Glassy Carbon Electrodes Modified with Melanic Polymers

This work deals with the study of polymers electrogenerated from different catechols at glassy carbon electrodes and the analytical applications of the resulting modified electrodes for dopamine quantification and glucose biosensing. The electropolymerization was performed from a 3.0×10^?3 M catechol solution (catechol, dopamine, norepinephrine, epinephrine or L ‐dopa in a 0.050 M phosphate buffer pH 7.40) by applying 1.00 V for 60 min. The properties of the polymers are very dependent on the nature of the catechol, L ‐dopa being the best. Glassy carbon electrodes modified with melanic polymers electrogenerated from L ‐dopa and norepinephrine were found to be suitable for dopamine determinations in flow systems, although the behavior was highly dependent on the nature of the monomer. Detection limits of 5.0 nM dopamine and interferences of 9.0 and 2.6% for 5.0×10^?4 M ascorbic acid and 5.0×10^?5 M dopac, respectively, were obtained at the glassy carbon electrode modified with a melanin‐type polymer generated from L ‐dopa (using 1.0×10^?3 M AA in the measurement solution). The advantages of using a melanin‐type polymer generated from dopamine to improve the selectivity of glucose biosensors based on carbon paste electrodes containing Pt and glucose oxidase (GOx) are also discussed. The resulting bioelectrodes combines the high sensitivity of metallized electrodes with the selectivity given by the polymeric layer. They exhibit excellent performance for glucose with a rapid response (around 10 seconds per sample), a wide linear range (up to 2.5×10^?2 M glucose), low detection limits (143 μM) and a highly reproducible response (R.S.D of 4.9%). The bioelectrodes are highly stable and almost free from the interference of large excess of easily oxidizable compounds found in biological fluids, such as ascorbic acid (AA), uric acid (UA) and acetaminophen.     

Microchip Capillary Electrophoresis‐Electrochemistry with Rigid Graphite‐Epoxy Composite Detector

A new rigid graphite‐epoxy composite electrode for electrochemical detection in microchip electrophoresis is described. The end‐column wall‐jet detection design relying on tubular rigid composite working electrode shows favorably low noise level and high signal‐to‐noise ratio when compared to glassy carbon detector. The performance of rigid graphite‐epoxy composite detector was compared to glassy carbon detector using dopamine and catechol as model analytes. The various parameters of the microchip electrophoresis‐rigid graphite‐epoxy composite detector were optimized.     

Enzymatic rotating biosensor for ciprofloxacin determination

The high sensitivity that can be attained using an enzymatic system and mediated by catechol has been verified by on-line interfacing of a rotating biosensor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP [EC 1.11.1.7], immobilized on a rotating disk, in the presence of hydrogen peroxide, catalyzed the oxidation of catechol, whose back electrochemical reduction was detected on a glassy carbon electrode surface at −200 mV. Thus, when ciprofloxacin (CF) was added to the solution, this piperazine-containing compound participate in Michael addition reactions with catechol to form the corresponding piperazine-quinone derivatives, decreasing the peak current obtained, in proportion with the increase of its concentration. The highest response for CF was obtained around pH 7. This method could be used to determine CF concentration in the range of 0.02-65 μM (r = 0.999). The determination of CF concentration was possible with a detection limit of 0.4 nM, in the processing of as many as 25 samples per hour. Application of this analysis to different pharmaceutical samples containing CF supports the utility of the HRP-rotating biosensor.     

Electroanalytical Study of Prussian Blue Modified Glassy Carbon Paste Electrodes

Two types of glassy carbon (GC) powder (i.e., Sigradur K and Sigradur G) have been mixed with mineral oil to obtain glassy carbon paste electrodes (GCPE's). The electrochemical behavior of such electrodes at different percentages of glassy carbon has been evaluated with respect to the electrochemistry of ferricyanide as revealed with cyclic voltammetry and the best paste composition was chosen. GC was then modified with Prussian Blue (PB), mixed at different percentages with unmodified GC and with a fixed amount of mineral oil in order to obtain PB modified glassy carbon paste electrodes (PB‐GCPE's). PB‐GCPE's with different percentages of GC modified with PB (PB‐GC) were compared and the dependence on the amount of PB on their performances was evaluated by studying the parameters of cyclic voltammetry (i.e., current peak, ΔE_p, anodic and cathodic current ratio, charge density) and the amperometric response to H₂O₂. Data interpretation based on the GC surface area is presented. GCPE's with a selected amount of PB‐GC were then tested as H₂O₂ probes and all the analytical parameters together with the dependence on pH were evaluated. Some preliminary experiments with these electrodes assembled as glucose, lysine and lactate biosensors are also reported.     

A Nonenzymatic Amperometric Method for Fructosyl‐Valine Sensing Using Ferroceneboronic Acid

Fructosyl valine (Fru‐Val) is a glycosylated component of hemoglobin (HbA_1c) that can serve as a diagnostic target for type 2 diabetes. While average blood glucose levels fluctuate significantly, the more stable levels of HbA_1c can serve as a better long‐term diagnostic marker. Here a diagnostic system, incorporating an amperometric method, for detecting Fru‐Val (at +0.1 V vs. Ag/AgCl), using ferrocene boronic acid (FcBA) is presented. FcBA can complex diols, and has easily detectable redox properties. The boronic acid group in FcBA mediates complexation, while the Fe(II)/Fe(III) couple serves as a transducer. The diagnostic system, based on a miniaturized bare glassy carbon paste electrode (GCPE), has a fast response time.     

Development of an Osmium Redox Polymer Mediated Bioanode and Examination of its Performance in Gluconobacter oxydans Based Microbial Fuel Cell

Gluconobacter oxydans (G. oxydans ) cells together with an osmium redox polymer (ORP) [Osmium (2,2’‐bipyridine)2(poly‐vinylimidazole)10Cl]Cl were combined with a glassy carbon paste electrode (GCPE) to form a bioanode for a microbial fuel cell (MFC) based on G. oxydans . Although there are G.oxydans / ORP combined bioanode in the literature, as far as it is known, this system is the first one where G.oxydans /ORP bioanode is combined with a cathode and a MFC is formed. After the optimization of experimental parameters, analytical characteristics of ORP/G. oxydans /GCPE bioanode were investigated. ORP/G. oxydans /GCPE showed two linear ranges for ethanol substrate as 1.0–30 mM (R²=0.902) and 30–500 mM (R²=0.997) and analytical range as 1.0–1000 mM. Limit of detection (3.0 s/m) and limit of quantification (10 s/m) values were calculated as 1.29 mM and 4.30 mM respectively where the RSD value was 1.16 % for n=5. Combining the developed bioanode in the presence of 5.0 mM K₃Fe(CN)₆ mediator with a Pt wire cathode a double compartment MFC was obtained via a salt bridge. G. oxydans /GCPE bioanode based MFC had maximum power density of 0.133 μW cm⁻² (at 33.5 mV), maximum current density as 8.73 μA cm⁻² and OCP value of 156 mV. On the other hand, ORP/G. oxydans /GCPE based MFC showed maximum power density as 0.26 μW cm⁻² (at 46.8 mV), maximum current density as 15.079 μA cm^‐2 and OCP value of 176 mV.     

四种药物中席夫碱基团在玻碳电极上的电化学行为

选择呋喃妥因、盐酸二甲双胍、西咪替丁和醋甲唑胺4种含有席夫碱基团的常见药物,运用电化学循环伏安法对其中的-C=N-基团在玻碳电极上的电化学氧化还原行为进行了研究。呋喃妥因、盐酸二甲双胍和西咪替丁中的席夫碱基团(-CH=N-)在玻碳电极上能够被还原,而且是一个电化学的不可逆过程,其还原电位分别为-0.864V,-1.36...     

Dispersion of multi-wall carbon nanotubes in polyhistidine: Characterization and analytical applications

We report for the first time the use of polyhistidine (Polyhis) to efficiently disperse multiwall carbon nanotubes (MWCNTs). The optimum dispersion MWCNT–Polyhis was obtained by sonicating for 30 min 1.0 mg mL⁻¹ MWCNTs in 0.25 mg mL⁻¹ Polyhis solution prepared in 75:25 (v/v) ethanol/0.200 M acetate buffer solution pH 5.00. The dispersion was characterized by scanning electron microscopy, and by cyclic voltammetry and amperometry using ascorbic acid as redox marker. The modification of glassy carbon electrodes with MWCNT–Polyhis produces a drastic decrease in the overvoltage for the oxidation of ascorbic acid (580 mV) at variance with the response observed at glassy carbon electrodes modified just with Polyhis, where the charge transfer is more difficult due to the blocking effect of the polymer. The reproducibility for the sensitivities obtained after 10 successive calibration plots using the same surface was 6.3%. The MWCNT-modified glassy carbon electrode demonstrated to be highly stable since after 45 days storage at room temperature the response was 94.0% of the original. The glassy carbon electrode modified with MWCNT–Polyhis dispersion was successfully used to quantify dopamine or uric acid at nanomolar levels, even in the presence of large excess of ascorbic acid. Determinations of uric acid in human blood serum samples demonstrated a very good correlation with the value reported by Wienner laboratory.     

Simultaneous voltammetric determination of acetaminophen and tramadol using Dowex50wx2 and gold nanoparticles modified glassy carbon paste electrode

A glassy carbon paste electrode (GCPE) modified with a cation exchanger resin, Dowex50wx2 and gold nanoparticles (D50wx2–GNP–GCPE) has been developed for individual and simultaneous determination of acetaminophen (ACOP) and tramadol (TRA). The electrochemical behavior of both the molecules has been investigated employing cyclic voltammetry (CV), chronocoulometry (CC), electrochemical impedance spectroscopy (EIS) and adsorptive stripping square wave voltammetry (AdSSWV). The studies revealed that the oxidation of ACOP and TRA is facilitated at D50wx2–GNP–GCPE. Using AdSSWV, the method allowed simultaneous determination of ACOP and TRA in the linear working range of 3.34 × 10⁻⁸ to 4.22 × 10⁻⁵ M with detection limits of 4.71 × 10⁻⁹ and 1.12 × 10⁻⁸ M (S/N = 3) for ACOP and TRA respectively. The prepared modified electrode shows several advantages such as simple preparation method, long-time stability, ease of preparation and regeneration of the electrode surface by simple polishing and excellent reproducibility. The high sensitivity and selectivity of D50wx2–GNP–GCPE were demonstrated by its practical application in the determination of both ACOP and TRA in pharmaceutical formulations, urine and blood serum samples.     

Electrochemical Sensor for the Quantification of Dopamine Using Glassy Carbon Electrodes Modified with Single‐Wall Carbon Nanotubes Covalently Functionalized with Polylysine

We report a dopamine electrochemical sensor based on the modification of glassy carbon electrodes (GCE) with polylysine‐functionalized single‐wall carbon nanotubes (SWCNT‐PLys). The resulting electrodes (GCE/SWCNT‐PLys) showed a significant improvement in the electrooxidation of dopamine with drastic decrease in the peak potentials separation and important enhancement in the associated currents. Dopamine was detected by differential pulse voltammetry‐adsorptive stripping with medium exchange at nanomolar levels even in the presence of high excess of ascorbic and uric acids. The sensor was successfully used for the quantification of dopamine in urine samples enriched with the neurotransmitter.     

Electrochemical Determination of Dopamine Using a Novel Perylenediimide-Derivative Modified Carbon Paste Electrode

A novel perylenediimide derivative, N,N′-bis(4-{2-[2-(2-methoxyethoxy ethoxy]ethoxy}phenyl)-3,4:9,10-perylene tetracarboxydiimide, was utilized for the modification of a carbon paste electrode to develop a practical and sensitive electrochemical sensor for dopamine detection. The effects of experimental parameters (modifier amount, pH, and scan rate) on the dopamine peak current were examined. The performance of the modified carbon paste electrode was evaluated under optimum conditions and 4.6-fold increase in the peak current was obtained compared to an unmodified carbon paste electrode. The linear range was between 1 and 100?µM dopamine and the limits of detection and quantification were 0.011 and 0.036?µM, respectively. The developed sensor was also applied for the quantitative determination of dopamine in injections and promising results were obtained.     

Fabrication of layer-by-layer modified multilayer films containing choline and gold nanoparticles and its sensing application for electrochemical determination of dopamine and uric acid

A novel electrochemical sensor has been constructed by use of a glassy carbon electrode (GCE) coated with a gold nanoparticle/choline (GNP/Ch). Electrochemical impedance spectroscopy (EIS), field emission scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the properties of this modified electrode. It was demonstrated that choline was covalently bounded on the surface of glassy carbon electrode, and deposited gold nanoparticles with average size of about 100 nm uniformly distributed on the surface of Ch. Moreover, the modified electrode exhibits strong electrochemical catalytic activity toward the oxidation of dopamine (DA), ascorbic acid (AA) and uric acid (UA) with obviously reduction of overpotentials. For the ternary mixture containing DA, AA and UA, these three compounds can be well separated from each other, allowing simultaneously determination of DA and UA under coexistence of AA. The proposed method can be applied to detect DA and UA in real samples with satisfactory results.     

A Novel Sensor Based on Manganese azo‐Macrocycle/Carbon Nanotubes to Perform the Oxidation and Reduction Processes of Two Diphenol Isomers

The present work describes the development of a selective and sensitive voltammetric sensor for simultaneous determination of catechol (CC) and hydroquinone (HQ), based on a glassy carbon (GC) electrode modified with manganese phthalocyanine azo‐macrocycle (MnPc) adsorbed on multiwalled carbon nanotubes (MWCNT). Scanning electron microscopy and scanning electrochemical microscopy were used to characterize the composite material (MnPc/MWCNT) on the glassy carbon electrode surface. The modified electrode showed excellent electrochemical activity towards the simultaneous oxidation and reduction of CC and HQ. On the MnPc/MWCNT/GC electrode, both CC and HQ can generate a pair of quasi‐reversible and well‐defined redox peaks. Under optimized experimental and operational conditions, the cathodic peak currents were linear over the range 1–600 µmol L^?1 for both CC and HQ, with limits of detection of 0.095 and 0.041 µmol L^?1, respectively. The anodic peak currents were also linear over the range 1–600 µmol L^?1 for both CC and HQ, with limits of detection of 0.096 and 0.048 µmol L^?1, respectively. The proposed method was effectively applied for the simultaneous detection of hydroquinone and catechol in water samples and the results were in agreement with those obtained by a comparative method described in the literature.     

Simultaneous Determination of Hydroquinone and Catechol at a Glassy Carbon Electrode Modified with Multiwall Carbon Nanotubes

A simply and high selectively electrochemical method for simultaneous determination of hydroquinone and catechol has been developed at a glassy carbon electrode modified with multiwall carbon nanotubes (MWNT). It was found that the oxidation peak separation of hydroquinone and catechol and the oxidation currents of hydroquinone and catechol greatly increase at MWNT modified electrode in 0.20 M acetate buffer solution (pH 4.5). The oxidation peaks of hydroquinone and catechol merge into a large peak of 302 mV (vs. Ag/AgCl, 3 M NaCl) at bare glassy carbon electrode. The two corresponding well‐defined oxidation peaks of hydroquinone in the presence of catechol at MWNT modified electrode occur at 264 mV and 162 mV, respectively. Under the optimized condition, the oxidation peak current of hydroquinone is linear over a range from 1.0×10^?6 M to 1.0×10^?4 M hydroquinone in the presence of 1.0×10^?4 M catechol with the detection limit of 7.5×10^?7 M and the oxidation peak current of catechol is linear over a range from 6.0×10^?7 M to 1.0×10^?4 M catechol in the presence of 1.0×10^?4 M hydroquinone with the detection limit of 2.0×10^?7 M. The proposed method has been applied to simultaneous determination of hydroquinone and catechol in a water sample with simplicity and high selectivity.     

Selective determination of dopamine in the presence of high concentration of ascorbic acid using nano-Au self-assembly glassy carbon electrode

The cysteamine (CA) was bound onto surface of the pretreated glassy carbon electrode (GC) with cyclic voltammetry (CV). Gold nanoparticles were self-assembled to the electrode binding with cysteamine via strong AuS covalent bond to fabricate the nano-Au self-assembled modified electrode (nano-Au/CA/GC). The modified electrode was characterized with cyclic voltammetric and ac impedance methods. The electrochemical behavior of dopamine (DA) on the modified electrode was investigated with cyclic voltammetry and differential pulse voltammetry (DPV). A well-defined redox peaks of DA on the nano-Au/CA/GC electrode were obtained at E_pa = 0.175 V and E_pc = 0.146 V (vs. SCE), respectively. The peak current of DA is linear with the concentration of DA in the range of 1.0 × 10⁻⁸ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹, with the correlation coefficient of 0.998. The detection limit is 4.0 × 10⁻⁹ mol L⁻¹ (S/N = 3). The modified electrode exhibited an excellent reproducibility, sensibility and stability for determination of DA in the presence of high concentration AA, and can be applied to determinate dopamine injection, with satisfied result.     

Voltammetric study on the complex of thiram-copper(II) and its application

Based on the formation of tetramethylthiuram disulfide (thiram)-copper(II) complex by square-wave voltammetry on a glassy carbon electrode, a new method is proposed for determination of thiram. There is a good linear relationship between peak current and concentration of thiram in the range of  mol l⁻¹ (r=0.999). The method is applied to the determination of thiram residue in plant with satisfactory results, compared with results achieved by using HPLC. Two oxidation peaks and two reduction peaks are obtained by cyclic voltammetry on a glassy carbon electrode in 0.2 mol l⁻¹ HAc-NaAc (pH 4.0) solution containing thiram-copper(II) complex. The electrode reaction process is quasi-reversible with adsorptive characteristics. The mechanism of electrode reaction is discussed.     

Covalent immobilization of single-walled carbon nanotubes and single-stranded deoxyribonucleic acid nanocomposites on glassy carbon electrode: Preparation, characterization, and applications

Single-stranded deoxyribonucleic acid (ssDNA)-wrapped single-walled carbon nanotubes (SWNTs) were modified on the surface of glassy carbon electrode (GCE) by covalent modification technique. Field emission scanning electron microscope (FE-SEM), X-ray photoelectron spectrum (XPS), electrochemical impedance spectroscopy (EIS), and cyclic voltammetric (CV) were used to characterize the properties of this modified electrode. The results showed that SWNTs-ssDNA composites were successfully immobilized onto the surface of GCE. Moreover, this modified electrode exhibited high stability, largely active areas, and efficiently electrocatalytic activities. It had been used for the analysis of various biomolecules, such as dopamine (DA), uric acid (UA), and ascorbic acid (AA), and the results were satisfactory.     

Determination of nitrobenzene by differential pulse voltammetry and its application in wastewater analysis

A new method for the determination of nitrobenzene (NB) by differential pulse voltammetry (DPV) based on an adsorptive stripping technique was developed. Cyclic voltammetry (CV) was used in a comparative investigation into the electrochemical reduction of NB at a glassy carbon electrode (GCE). With this electrode, the sharp peak of NB appeared at −0.71 V (vs. Ag/AgCl). The experimental parameters were optimized. Studies on the effect of pH on the peak height and peak potential were carried out over the pH range ca. 9.0–11.5 with sodium carbonate/sodium hydrogen carbonate buffer solution. A solution of pH 9.9 was chosen as analytical medium. Cathodic peak currents were found to be linearly related to the concentration of NB over the range ca. 12.3–1.23 × 10⁴ μg L⁻¹ with relative standard deviations of ca. 3.26–6.75%. The detection limit of NB in water was 5.42 μg L⁻¹. The interference of organic and inorganic species on the voltammetric response was also studied. The proposed method was applied to the determination of NB in wastewater samples with an average recovery of ca. 95.9–102.4%.