Voltage-dependent excitation profiles of pyridine adsorbed on a silver electrode

Excitation profiles of Raman modes of pyridine adsorbed on an Ag electrode were measured at three applied voltages. A resonant type of contribution was observed, the resonance energy was voltage dependent. Our observations were attributed to the voltage-dependent effects of charge transfer transitions.     

Surface-enhanced Raman spectra of quinoxaline adsorbed at a silver electrode

Surface-enhanced Raman scattering from quinoxaline adsorbed at a Ag electrode was observed. The SER spectrum exhibited remarkable a concentration and potential dependence, and indicated of two types of adsorbed species. They were assigned as flat and end-on species on the electrode.     

Raman spectra of pyridine adsorbed on a copper electrode

The surface enhanced Raman scattering (SERS) of pyridine adsorbed on a copper electrode was observed with 647.1 nm excitation and the dependence of the Raman intensity as a function of electrode potential was obtained for the most intense bands. The results are compared with reported intensity and frequency values for the silver/pyridine system.     

The sers of pyridine on an electrochemically plated silver electrode

Surface-enhanced Raman scattering (SERS) of pyridine adsorbed on silver electrodes prepared by an electrochemical plating method was studied. This EP A     

The surface-enhanced Raman spectrum of N-methylpyridinium ion on a silver electrode

The SER spectrum is reported for N-methylpyridinium iodide, an organic cation with no unshared electron pair available for interaction with the electrode. Both Raman- and infrared-active bands are observed with small frequency shifts. No SERS is observed for N-methylpyridinium chloride until trace amounts of iodide are added to the solution.     

Raman spectroscopy of cobalt phthalocyanine adsorbed on a silver electrode

Raman spectra of cobalt tetrasulfonated phthalocyanine adsorbed on a silver electrode in aqueous electrolytes have been recorded in situ. It is shown that the entensity of the Raman bands is directly related to the amount of charge transfered during the electrochemical activation of the silver. The strong potential dependence of distinct Raman bands is discussed with respect to the resonance properties of the adsorbate, taking into account the orientation of the molecule on the surface.     

Surface enhanced Raman spectra of nucleic acid components adsorbed at a silver electrode

High-resolution vibrational spectra of nucleic acid components adsorbed on a silver electrode were obtained using a spectroelectrochemical method based on the large-intensity enhancement for Raman scattering at electrode surfaces.The laser surface Raman spectra of purine, adenine, adenosine, deoxyadenosine, adenine mononucleotides, adenylyl-3′, 5′-adenosine and polyriboadenylic acid were recorded in the range of 150–3500 cm^?1. The intensities of the vibrational bands were highly dependent upon the electrochemical preparation of the electrode, the applied potential and the nature of the adsorbate species. High-intensity spectra in rather dilute bulk solutions were obtained.The phosphate derivatives of adenosine exhibited strongly enhanced Raman scattering. Spectral band frequencies corresponded closely with normal Raman spectra of these molecules in solution. The adenine ring breathing mode at 740 cm^?1 and the adenine ring skeletal vibration at 1335 cm^?1 produced prominent Raman scattering. A strong band at about 240 cm^?1 for the adenine mononucleotides was attributed to silver/adsorbed phosphate group vibrations.     

The dependence of DNA luminescence on excitation wavelength in the UV/VUV region

Luminescence emission and excitation spectra have been obtained for DNA films at 77 K under vacuum ultraviolet excitation (150–280 nm). The emission spectra, which cover the wavelength range 310 to 490 nm, consists of two components, a short-lived component around 350 nm which is attributed to fluorescence and a longer-lived component around 410 nm believed to be phosphorescence. The excitation spectra, as functions of emission wavelength, are similar in profile with a fairly broad peak around 9240–260 nm) with a shoulder around 200 nm followed by a gradual but constant decrease into the vacuum ultraviolet region of the spectrum. No evidence of autoionization was seen in the region investigated.     

Surface-enhanced Raman scattering from crystal violet adsorbed on a silver electrode

SERS from crystal violet (CV) on a Ag electrode was investigated under preresonance and resonance conditions. The excitation profile of the chemisorbed species is like that of dissolved molecules but intensities are ≈ 1000 times larger. The Raman enhancement is ≈ 10⁸ and exhibits a specific potential dependence even in the absence of adsorption-desorption process. At potentials where reduction of CV occurs leuco crystal violet was detected.     

Dependencies of the Raman spectra of p-oligophenyls on the chain length and the excitation wavelength

The 1064 nm excited Raman spectra of p-terphenyl, p-quaterphenyl, p-quinquephenyl and p-sexiphenyl have been observed and compared with the 514.5 nm excited spectra. Dependencies of intensities of some major bands on the chain length and the excitation wavelength are discussed in terms of the preresonant Raman effect. A method for estimating the chain length from relative intensities is proposed.     

Surface-enhanced Raman scattering at the silver electrode/ionic liquid (BMIPF6) interface

This is the first report of in situ SER spectra of chemical species adsorbed on a Ag/room temperature ionic liquid (RTIL) interface. We have investigated the dependence of the SERS intensity of the RTIL derived from 1-n-butyl-3-methylimidazolium hexafluorophosfate (BMIPF6) adsorbed on a silver electrode. It has been shown that the BMI+ adsorbs on the silver electrode for potentials more negative than -0.4 V vs a Pt quasireference electrode (PQRE). In the -0.4 to -1.0 V potential range the SER spectra are similar to the Raman spectrum of the RTIL BMIPF6. At potentials more negative than -1.0 V some imidazolium ring vibrational modes and N-CH3 vibrations are enhanced, suggesting that the imidazolium ring is parallel to the surface and for potentials <-2.8 V the BMI+ is reduced to the BMI carbene. The potential dependence of the SERS intensities of Py adsorbed on a silver electrode in BMIPF6 has also been investigated. The results have shown that at potentials less negative than -0.8 V (vs PQRE) Py adsorbs at an end-on configuration forming an Ag-N bond. In the -0.9 to -1.4 V potential range Py molecules lie flat on the electrode surface and at potentials <-1.4 V Py is replaced by the BMI+. The electrochemical and SERS results have shown that Py has the effect of changing the oxidation of silver in that medium as well as the reduction of BMI+ to the BMI carbene. In the presence of Py the BMI+ reduction is observed at potentials near -2.4 V. The Ag electrode has presented SERS activity from 0.0 to -3.0 V.     

Effect of silver ions on codischarge of copper and silver at a platinum electrode at the copper underpotentials

Codischarge of copper and silver ions at potentials more positive than the equilibrium potential of the Cu⁺²/Cu system is studied by the voltammetry technique. At the Ag⁺ concentrationc below 10^-7 M, silver ions make no noticeable impact on the formation of a Cu_ad monolayer but decelerate that of supermonolayers of Cu at almost equilibrium potentials. Atc ≥ 4 × 10^-5 M, voltammograms indicate the concurrent adsorption of Cu_ad and Ag_ad and the nucleation and deposition of phase Ag     

On the dependence of multiphoton excitation of SF6 on the laser intensity

The dependence of multiphoton excitation of SF₆ on laser intensity has been theoretically studied by using two different quantum-mechanical approaches. The results, which are in satisfactory agreement with available experiments, show a dependence of multiphoton absorption already at intensities of some MW/cm².     

Surface-enhanced Raman scattering of single-walled carbon nanotubes on modified silver electrode

A roughed silver electrode modified with gold/silver nanoparticles is used as a substrate, on which high quality SERS of SWCNTs are obtained, indicating that the modified silver electrode is a high-quality SERS-active substrate for SWCNTs. Some new bands that indicate the structure of SWCNTs were obtained. The gold/silver nanoparticles modified on the roughed silver electrode surface can not only make sure the strong adsorption of SWCNTs in this system but also play an important role in magnifying the surface local electric field near the silver electrode surface through resonant surface plasmon excitation. From the rich information on the modified silver electrode obtained from the SERS and the potential dependent SERS, we may deduce the probable SERS mechanism in the process. The theory and experiment results indicate that it is can be used as a new technique for monitoring synthesis quality of SWCNTs. The probable reasons are given.     

The origin of the potential dependence of the surface enhanced Raman spectrum of chloride on silver

We show through enhanced Raman scattering from chloride on silver at large positive metal charge that the Stark effect and bond perturbation play minor roles in the potential dependence of the spectra. The major influence on the intensity and frequency of these spectra can be explained by charges in surface coverage together with mutual depolarization effects.     

Ultrafast fluorescence resonance energy transfer in a reverse micelle: excitation wavelength dependence

Fluorescence resonance energy transfer (FRET) from coumarin 480 (C480) to fluorescein 548 (F548) in a sodium dioctyl sulfosuccinate (AOT) reverse micelle is studied by picosecond and femtosecond emission spectroscopy. In bulk water, at the low concentration of the donor (C480) and the acceptor (F548), no FRET is observed. However, when the donor (C480) and the acceptor (F548) are confined in a AOT reverse micelle very fast FRET is observed. The time constants of FRET were obtained from the rise time of the emission of the acceptor (F548). In a AOT microemulsion, FRET is found to occur in multiple time scales--3, 200, and 2700 ps. The 3 ps component is assigned to FRET in the water pool of the reverse micelle with a donor-acceptor distance, 16 A. The 200 ps component corresponds to a donor-acceptor distance of 30 A and is ascribed to the negatively charged acceptor inside the water pool and the neutral donor inside the alkyl chains of AOT. The very long 2700 ps component may arise due to FRET from a donor outside the micelle to an acceptor inside the water pool and also from diffusion of the donor from bulk heptane to the reverse micelle. With increase in the excitation wavelength from 375 to 405 nm the relative contribution of the FRET due to C480 in the AOT reverse micelle (the 3 and 200 ps components) increases.     

Surface-enhanced Raman scattering at a flake silver surface

Supports coated with a flake silver paint show strong surface-enhanced Raman spectra for many molecules, using excitation at 1064 nm. SERS spectra thus obtained for several pyridine derivatives are illustrated, and are discussed in terms of the Brönsted and Lewis acidic properties of surface sites. The technique offers exceptional simplicity, and shows promise for analytical applications.