Europium(III) Concentration Effect on the Spectroscopic and Photoluminescent Properties of BaMoO4:Eu

BaMoO₄:Eu (BEMO) powders were synthesized by the polymeric precursor method (PPM), heat treated at 800 °C for 2 h in a heating rate of 5 °C/min and characterized by powder X-ray diffraction patterns (XRD), Fourier Transform Infra-Red (FTIR) and Raman spectroscopy, besides room temperature Photoluminescence (PL) measurements. The emission spectra of BEMO samples under excitation of 394 nm present the characteristic Eu³⁺ transitions. The relative intensities of the Eu³⁺ emissions increase as the concentration of this ion increases from 0.01 to 0.075 mol, but the luminescence is drastically quenched for the Ba_0.855Eu_0.145MoO₄ sample. The one exponential decay curves of the Eu^{3+ 5}D₀→⁷F₂ transition, λ _exc = 394 nm and λ _em = 614 nm, provided the decay times of around 0.54 ms for all samples. It was observed a broadening of the Bragg reflections and Raman bands when the Eu⁺³ concentration increases as a consequence of a more disordered material. The presence of MoO₃ and Eu₂Mo₂O₇ as additional phases in the BEMO samples where observed when the Eu³⁺ concentration was 14.5 mol%.     

Precipitate synthesis of BaMoO4 and BaWO4 nanoparticles at room temperature and their photoluminescence properties

The uniform BaMoO₄ and BaWO₄ nanoparticles (NPs) have been successfully synthesized by solution route – the direct precipitation of Ba(NO₃)₂ and Na₂MO₄ (M = Mo and W) in ethylene glycol under 24 h stirring. The XRD patterns and SEM images proved that the products were tetragonal structured BaMoO₄ and BaWO₄ with uniform round nanoparticles. Shape, average particle size and particle-size distribution of products were analyzed by TEM – showing the round nanoparticles with the average size of 31.52 ± 4.65 nm for BaMoO₄, and 59.77 ± 9.61 nm for BaWO₄. The room temperature photoluminescence (PL) indicated that the products have strong blue emission centered at 441 nm – excited with 280 nm wavelength for BaMoO₄ NPs, and strong violet emission centered 378 nm – excited with 344 nm wavelength for BaWO₄ NPs. These PL behaviors attributed the existence of intrinsic transitions in the [MO₄]^2-$[{\text{MO}}_4{]}^{2-}$ (M = Mo and W) tetrahedrons of their crystal lattices.     

Synthesis, Characterization and Photophysical Properties of Eu3+ Doped in BaMoO4

In this work Ba_0.99Eu_0.01MoO₄ (BEMO) powders were prepared by the first time by the Complex Polymerization Method. The structural and optical properties of the BEMO powders were characterized by Fourier Transform Infra-Red (FTIR), X-ray Diffraction (XRD), Raman Spectra, High-Resolution Scanning Electron Microscopy (HR-SEM) and Photoluminescent Measurements. XRD show a crystalline scheelite-type phase after the heat treatment at temperatures greater than 400 °C. The ionic radius of Eu³⁺ (0.109 nm) is lower than the Ba²⁺ (0.149 nm) one. This difference is responsible for the decrease in the lattice parameters of the BEMO compared to the pure BaMoO₄ matrix. This little difference in the lattice parameters show that Eu³⁺ is expected to occupy the Ba²⁺ site at different temperatures, stayed the tetragonal (S₄) symmetry characteristic of scheelite-type crystalline structures of BaMoO₄. The emission spectra of the samples, when excited at 394 nm, presented the ⁵D₁→⁷F_{0, 1 and 2} and ⁵D₀→⁷F_{0, 1, 2, 3 and 4} Eu³⁺ transitions at 523, 533, 554, 578, 589, 614, 652 and 699 nm, respectively. The emission spectra of the powders heat-treated at 800 and 900 °C showed a marked increase in its intensities compared to the materials heat-treated from 400 to 700 °C. The decay times for the sample were evaluated and all of them presented the average value of 0.61 ms. Eu³⁺ luminescence decay time follows one exponential curve indicating the presence of only one type of Eu³⁺ symmetry site.     

Intense violet-blue photoluminescence in BaZrO3 powders: A theoretical and experimental investigation of structural order-disorder

Intense violet-blue photoluminescence (PL) emission at room temperature was verified in BaZrO₃ (BZO) powders with structural order-disorder. Ab-initio calculations, ultraviolet-visible absorption spectroscopy and PL were performed. Theoretical results showed that the local disorder in the network-formed Zr clusters present an important role in the formation of hole-electron pair. The experimental data and theoretical results are in agreement, indicating that the PL emission in BZO powders can be related to the structural order-disorder degree in the lattice.     

Preparation and characterization of Zn2SiO4: Mn phosphors with hydrothermal methods

Mn²⁺-doped Zn₂SiO₄ phosphors had been prepared by hydrothermal method in stainless-steel autoclaves. Effects of synthesized methods, reaction temperature, ambience of heat treatment on the structure and the luminescence properties of this silicate were studied with X-ray diffraction apparatus (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM) and fluorescence spectrum. Results show that Zn₂SiO₄ nanocrystalline can be obtained by hydrothermal method at relatively low temperatures. The absorption pattern shows an absorption edge at about 380 nm originated from ZnO crystals and two absorption bands at about 215 and 260 nm. Mn²⁺-doped Zn₂SiO₄ has a luminescence band with the wavelength at about 522 nm under 255 nm excitation, and the luminescent intensity increases after being heat treated.     

Photoluminescence study of disordering in the cation sublattice of Cu2ZnSnS4

In this study we investigated the influence of the degree of disordering in the cation sublattice on low temperature photoluminescence (PL) properties of Cu₂ZnSnS₄ (CZTS) polycrystals. The degree of disordering was changed by using different cooling rates after post-annealing at elevated temperatures. The results suggest that in the case of higher degree of cation sublattice disorder radiative recombination involving defect clusters dominates at T = 10 K. These defect clusters induce local band gap energy decrease in CZTS. The concentration of defect clusters can be reduced by giving more time for establishing ordering in the crystal lattice. As a result, radiative recombination mechanism changes and band-to-impurity recombination involving deep acceptor defect with ionization energy of about 200 meV starts to dominate in the low temperature PL spectra of CZTS polycrystals.     

Radiation-induced defects in Pr3+-activated Liyf4 laser host

Rare earth doped fluorides have been used in laser applications. Not much is known about the effect of ionizing radiation on the lasing and other properties of fluorides. Therefore, in recent years much attention has been paid to the study of radiation-induced defects in laser materials, as they affect the optical and stimulated emission properties. The defect formation by γ-ray irradiation in Pr³⁺ activated LiYF₄, powder prepared by melt method, have been studied by thermoluminescence and electron spin resonance techniques and are reported in this paper. It is shown that LiYF₄:Pr³⁺ is sensitive to γ-ray radiation. Characterization of this laser material using ESR and photoluminescence techniques is also described.     

花状NaY(MoO4)2的合成和(MoO4)2:Eu3+的光学性质

用微波辅助水热-煅烧法成功合成了花状NaY(MoO₄)₂颗粒,用XRD、XPS、FESEM进行了表征,提出了花状NaY(MoO₄)₂颗粒可能的形成机理. 采用相同的方法合成了NaY(MoO₄)₂:Eu³⁺荧光体,该荧光材料在612 nm处有一个强的发射峰,可用作白色发光二极管的红色磷光剂. 此外,微波辅助水热-煅烧法可能发展成为制备其他花状稀土钼酸盐的有效途径.     

Pulverization of the flux line lattice, the phase coexistence and the spinodal temperature of the order—disorder transition in a weakly pinned crystal of Yb3Rh4Sn13

We have studied metastability effects pertaining to the peak effect (PE) in critical current density (J _c) via isofield scans in AC susceptibility measurements in a weakly pinned single crystal of Yb₃Rh₄Sn₁₃ (T _c(0) ≈ 7.6 K). The order-disorder transition in this specimen proceeds in a multi-step manner. The phase coexistence regime between the onset temperature of the PE and the spinodal temperature (where metastability effects cease) seems to comprise two parts, where ordered and disordered regions dominate the bulk behavior, respectively. The PE line in the vortex phase diagram is argued to terminate at the low field end at a critical point in the elastic (Bragg) glass phase.     

B位等价掺杂SrBi4Ti4O15铁电材料的性能研究

采用了传统的固相烧结工艺,制备了不同Zr和Hf掺杂量的SrBi₄Ti_4-xZr_xO₁₅（x=000,003, 006,010,020）和SrBi₄Ti_4－xHf_xO₁₅（x=000,0005, 0015,0030,0060）的陶瓷 关键词： 4Ti_4-xZr_xO₁₅')" href="#">SrBi₄Ti_4-xZr_xO₁₅ 4Ti_4－xHf_xO₁₅')" href="#">SrBi₄Ti_4－xHf_xO₁₅ 铁电性能 介电性能     

Optical study of the phase transitions in LiKSO4

The birefringence of LiKSO₄ has been measured over the range 27–700°C. The change in birefringence with heating and cooling is seen to be very different. Observations have been made on domains in (001) and (100) plates near the phase transitions.     

Synthesis and photoluminescence properties of Sm-doped CaWO4 nanoparticles

The Sm³⁺-doped CaWO₄ nanoparticles were synthesized by hydrothermal method. The room temperature photoluminescence (PL) spectra of Sm³⁺-doped CaWO₄ nanoparticles doped with different Sm³⁺ concentrations under 405 nm excitation have been investigated. The PL spectra showed four strong emission peaks at 460, 571, 609, and 653 nm. The first emission peak at 460 nm could be due to a structural defect of the lattice, an oxygen-deficient WO₃ complex. The other three emissions at 571, 609, and 653 nm were due to the f-f forbidden transitions of the 4f electrons of Sm³⁺, corresponding to ⁴G_5/2→⁶H_5/2 (571 nm), ⁶H_7/2 (609 nm), and ⁶H_9/2 (653 nm), respectively. In addition, the optimum Sm³⁺ concentration in CaWO₄ nanoparticles for optical emission was determined to be 1.0%. The Sm³⁺⁴G_5/2→⁶H_7/2 (609 nm) emission intensity of Sm³⁺-doped CaWO₄ nanoparticles significantly increased with the increase of Sm³⁺ concentration, and showed a maximum when Sm³⁺ doping content was 1.0%. If Sm³⁺ concentration continued to increase, namely more than 1.0%, the Sm³⁺⁴G_5/2→⁶H_7/2 emission intensity would decrease. The present materials might be a promising phosphor for white-light LED applications.     

DSC study of superionic phase transition in (NH4)4H2(SeO4)3 single crystals

DSC and complex impedance studies of the protonic conductor (NH₄)₄H₂(SeO₄)₃, which undergoes a superionic phase transition of first order at T_s = 378 K show that the activation energy of ionic conductivity d(lg σ)/dt and the ordering enthalpy ΔC_p of the crystal are proportional: d(lg σ)/dT = XΔC_p/RT_s + const, as found for MAg₄I₅ crystals undergoing a second-order superionic phase transition. Thus the short-range order environment of the species involved in fast-ion transport plays the main role in the superionic phase transition. This is also supported by the value of the entropy change at T_s, ΔS = 43 J/mole·K. A new metastable phase was found to be induced on heating the (NH₄)₄H₂(SeO₄)₃ crystal above T_s.     

Photoluminescence spectra of thenardite Na2SO4 activated with rare-earth ions, Ce, Sm, Tb, Dy and Tm

Five Na₂SO₄:RE³⁺ phosphors activated with rare-earth (RE) ions (RE³⁺=Ce³⁺, Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) were synthesized by heating natural thenardite Na₂SO₄ from Ai-Ding Salt Lake, Xinjiang, China with small amounts of rare-earth fluorides, CeF₃, SmF₃, TbF₃, DyF₃ and TmF₃, at 920 °C in air. The photoluminescence (PL) and optical excitation spectra of the obtained phosphors were measured at 300 and 10 K. In the PL spectrum of Na₂SO₄:Ce³⁺ at 300 K, two overlapping bands with peaks at 335 and 356 nm due to Ce³⁺ were first observed. Narrow bands observed in PL and excitation spectra of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors were well identified with the electronic transitions within the 4fⁿ (n=5, 8, 9 and 12) configurations of RE³⁺. The existence of excitation bands with high luminescence efficiency at wavelengths shorter than 230 nm is characteristic of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors. The obtained results suggest that these phosphors are unfavorable as the phosphor for usual fluorescence tubes, i.e., mercury discharge tubes, but may be favorable as the phosphor for UV-LED fluorescent tubes and as cathodoluminescence, X-ray luminescence and thermoluminescence phosphors.     

Effect of Bi on fluorescence properties of YPO4:Dy phosphors synthesized by a modified chemical co-precipitation method

Y_0.99−xPO₄:0.01Dy³⁺, xBi³⁺ (x=0, 0.01, 0.05, 0.10, 0.15, 0.20 and 0.25) phosphors have been synthesized by a modified chemical co-precipitation method using urea as a pH value regulator. The samples were characterized by X-ray powder diffraction (XRD) and photoluminescence spectroscopy. XRD results show that the samples have only single tetragonal structure when x≤0.15, but extraneous BiPO₄ phase appears besides major tetragonal phase when x≥0.20. The crystallinity of the samples is found to improve with increasing Bi³⁺ ion concentration from 0 to 15 mol%, and then decreased for higher concentrations associated with increasing BiPO₄ phase. Photoluminescence excitation spectra results show that the phosphor can be efficiently excited by ultraviolet light from 250 to 400 nm including four peaks at 294, 326, 352 and 365 nm. Emission spectra exhibit strong blue emission (483 nm) and another strong yellow emission (574 nm). When the Bi³⁺ ion concentration is 1 mol%, the intensity of excitation and emission spectra increased evidently. In addition, the yellow-to-blue emission intensity ratio (I_Y/I_B) is strongly related to the excitation wavelength and not to the Bi³⁺ ion concentration.     

Luminescence of ZnWO4 and CdWO4 thin films prepared by spray pyrolysis

Thin films of ZnWO₄ and CdWO₄ were prepared by spray pyrolysis and the structural, optical, and luminescence properties were investigated. Both ZnWO₄ and CdWO₄ thin films showed a broad blue-green emission band. The broad band of ZnWO₄ films was centered at 495 nm (2.51 eV) consisted of three bands at 444 nm (2.80 eV), 495 nm (2.51 eV) and 540 nm (2.30 eV). The broad band of CdWO₄ films at 495 nm (2.51 eV) could be decomposed to three bands at 444 nm (2.80 eV), 495 nm (2.51 eV) and 545 nm (2.28 eV). These results are consistent with emission from the WO₆⁶⁻ molecular complex. The luminance and efficiency for ZnWO₄ film at 5 kV and 57 μA/cm² were 48 cd/m² and 0.22 lm/w, respectively, and for CdWO₄ film the values were 420 cd/m² and 1.9 lm/w.     

On the isotope effect of Tc in squaric acid (H2C4O4)

The phase transition mechanism in squaric acid is reviewed from the viewpoint of the pressure dependence of the O—H—O bond length (2R). The two-dimensional pressure effect on T_c is extracted from the hydrostatic pressure behaviour by taking account of the uniaxial stress applied perpendicular to the layer planes. The result shows that if 2R(H₂SQ) is stretched to 2R(D₂SQ) the phase transition temperature 7^H _c of H₂SQ coincides with T^D _c of D₂SQ. This result supports the suggestion that the phase transition mechanism is of the order-disorder type.     

Preparation and characterization of bifunctional, Fe3O4/ZnO nanocomposites and their use as photocatalysts

Bifunctional magnetic-optical Fe₃O₄/ZnO nanocomposites with different molar ratio were successfully synthesized by a facile two-step strategy. Compared with the other methods, it was found to be mild, inexpensive, green, convenient and efficient. Fe₃O₄ nanocrystal was used as seed for the deposit and growth of ZnO nanoparticle. A series of the characterizations manifested that the combination of Fe₃O₄ with ZnO nanoparticles was successful. Photocatalytic activity studies confirmed that as-prepared nanocomposites had excellent photodegradating behavior to Methyl Orange (MO) compared to the pure ZnO nanoparticles. The results showed that the degradation percentage of MO was about 93.6% for 1 h when the amount of catalyst was 0.51 g L⁻¹ and initial concentration of MO was 6 × 10⁻⁵ mol L⁻¹ in the pH 7 solution. Moreover, the kinetics of photocatalytic degradation reaction could be expressed by the first-order reaction kinetic model. Furthermore, the Fe₃O₄/ZnO nanocomposites could be also served as convenient recyclable photocatalysts because of their magnetic properties.     

Synthesis and characterization of Mn-doped Zn2SiO4/SiO2 phosphor particles in core-shell structure

Manganese-doped zinc silicate (Zn₂SiO₄:Mn) is a kind of phosphor material that has a photo-luminescent (PL) and cathode-luminescent (CL) properties with intensive green light emission at 520 nm. The particles consisting of SiO₂@Zn₂SiO₄:Mn (SiO₂ core-Zn₂SiO₄:Mn shell) were synthesized via colloidal process and forced precipitation. After drying, the Zn/Mn precipitates were coated on the surface of SiO₂ particles. The Zn/Mn precipitates reacted with SiO₂ and transformed to Zn₂SiO₄:Mn by suitable calcination. The microstructure, crystalline phase, and luminescent characteristics of the products were studied. Besides, a CL device consisting of the core-shell powder was characterized.     

Study of Structural and Photoluminescent Properties of Ca8Eu2(PO4)6O2

In this work it is presented for the first time the nanostructured hydroxyapatites doped with 0.5, 1.0 and 2.0 wt% of Eu³⁺ prepared at room temperature by the mechanical alloying technique. X-ray diffraction powder (XRD), infrared (IR) and Raman scattering spectroscopy, scanning electron microscopy (SEM), microhardness measurements as well as luminescent data of Eu³⁺ were used to investigate the structural and optical properties of these nanomaterials. The electrical and dielectrical analyses were used with the intention of having a better comprehension about the electromagnetic fields in pure and doped hydroxyapatites.