Direct multicomponent analysis of beer samples constituents using micellar electrokinetic capillary chromatography

A capillary electrophoretic method was developed using micellar electrokinetic capillary chromatography (MEKC) with diode-array detection to analyze simultaneously 26 beer constituents in a single procedure, including alcohols, iso-alpha-acids, amino acids, flavonoids, isoflavonoids, a vitamin, purine and pyrimidine bases. After filtration, sample components were separated with an uncoated capillary and a 25 mM sodium borate and 110 mM SDS buffer at pH 10.5. Analyses were run at 14 kV and 8 s of hydrodynamic injection with UV detection at 210 nm and 270 nm. The proposed method was successfully applied to the direct determination of beer constituents without any sample cleanup procedures.     

Hyphenated techniques in anticancer drug monitoring. II. Liquid chromatography-mass spectrometry and capillary electrophoresis-mass spectrometry

A micellar electrokinetic chromatographic (MEKC) method was developed for the separation of ten phenolic acids including cichoric acid and caftaric acids, specific marker phytochemicals of Echinacea purpurea. The MEKC method involved the use of 70 mM sodium deoxycholate (SDC) in 40 mM borate (pH 9.2) buffer and UV detection at 300 nm. The bile acid was used as biosurfactant able to provided a micellar system with different and more selective properties than sodium dodecyl sulfate. The effects of SDC and borate concentration and buffer pH on the analyte resolution were evaluated. The validated method was applied to the determination of cichoric acid and related compounds in E. purpurea root extracts, and in commercial E. purpurea based dried extracts and tablets.     

Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis

In this work the suitability of micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary electrophoresis (CE) to the analysis of the primary oxidation products of linoleic acid was studied with uncoated fused-silica capillaries. The primary autoxidation products of linoleic acid are the four hydroperoxide isomers 13-hydroperoxy-cis-9, trans-11-octadecadienoic acid, 13-hydroperoxy-trans-9, trans-11-octadecadienoic acid, 9-hydroperoxy-trans-10,cis-12-octadecadienoic acid, 9-hydroperoxy-trans-10, trans-12-octadecadienoic acid. Addition of a surfactant such as sodium dodecyl sulfate (SDS) or sodium cholate (SC) into the running buffer (20-30 mM 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) or ammonium acetate, pH 9.5-11) was required to enhance the water solubility of the sample and selectivity of the separation. MEKC proved to be a promising new technique for the separation of the primary oxidation products of lipids giving results comparable to high performance liquid chromatography (HPLC). Partial separation of hydroperoxide isomers was also achieved using nonaqueous CE with methanol-acetonitrile-sodium cholate as running buffer.     

Purification of the isoflavonoid puerarin by adsorption chromatography on cross-linked 12% agarose

The isoflavonoid puerarin in extracts of the well-known traditional Chinese drug Radix puerariae (root of the plant Pueraria lobata) can be separated from other isoflavonoids by adsorption chromatography on the cross-linked 12% agarose gel Superose 12 equilibrated in distilled water. The adsorption is totally quenched by the addition of 50% acetic acid. The separation of the isoflavonoids is tentatively ascribed to interaction with the residues of the cross-linking reagents used in the manufacturing process of Superose 12. Thus, no useful separation can be achieved with non-cross-linked 12% agarose gel media. Symmetric elution profiles at high sample loadings (16 mg on a 24 ml column) suggest linear adsorption isotherms for the isoflavonoids.     

Analysis of positional isomers of hydroxylated aromatic cytokinins by micellar electrokinetic chromatography

A micellar electrokinetic chromatography (MEKC) method was developed for the separation of six positional isomers of hydroxylated aromatic cytokinins (topolin and topolin riboside), including ortho-topolin, meta-topolin, para-topolin, ortho-topolin riboside, meta-topolin riboside, and para-topolin riboside. Optimum resolution and analysis time (ca. 20 min) for the six aromatic cytokinin standards were achieved with a running buffer at pH 8.0 consisting of 20 mM boric acid, 50 mM sodium dodecyl sulfate (SDS), and 20% v/v methanol. The method has good reproducibility and has been successfully applied to detect the presence of a putative ortho-topolin in coconut water extract sample purified using C(18) and mixed-mode solid-phase extraction (SPE) columns. Other advantages of this MEKC method are short analysis time, low solvent consumption, and separation of positional isomers which could be achieved by a simple aqueous buffer system without the use of expensive chromatographic columns. In addition, a high-performance liquid chromatography (HPLC) method with baseline separation of the six topolin and topolin riboside standards was developed for the confirmation of the endogenous ortho-topolin in coconut water sample. Finally, the presence of ortho-topolin was further confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) based on its characteristic fragmentation pattern.     

Characterisation of retention in micellar high-performance liquid chromatography, in micellar electrokinetic chromatography and in micellar electrokinetic chromatography with reduced flow

The retention (migration) behaviour of various barbiturates, phenylurea and triazine herbicides in micellar electrokinetic chromatography (MEKC) with uncoated fused-silica capillaries was compared with the behaviour in micellar electrokinetic chromatography with reduced electroosmotic flow (RF-MEKC) using capillaries modified with linear polyacrylamide. The error in the values of the retention factors caused by the neglection of the contribution of the electroosmotic flow in RF-MEKC was investigated and a method for correcting this error was suggested. The retention was characterised using the lipophilic and polar indices to characterise and to predict the retention as a function of the concentration of the surfactant (sodium dodecylsulphate) in the running buffer in MEKC and in RF-MEKC. Homologous series of n-alkylbenzenes and of n-alkan-2-ones were compared as the standard sets for the calibration of the retention (migration) index scale. The values of the lipophilic indices of a given solute measured in reversed-phase HPLC, MEKC and RF-MEKC are close to each other. Under ideal MEKC conditions, the values of the polarity indices are close to one for various sample solutes. However, for partially ionised compounds such as weakly acidic barbiturates, where the contribution of the electrophoretic migration is significant, the values of the polarity indices are significantly lower than one. Optimum conditions for separations of mixtures of triazine and phenylurea herbicides and of barbiturates using various techniques tested were compared.     

Determination of Phytomarkers in Pharmaceutical Preparations of Hemidesmus indicus Roots by Micellar Electrokinetic Chromatography and High-Performance Liquid Chromatography–Mass Spectrometry

Micellar electrokinetic chromatography was applied to the determination of the major phytomarkers, namely 2-hydroxy-4-methoxybenzaldehyde, 2-hydroxy-4-methoxybenzoic acid, and 3-hydroxy-4-methoxybenzaldehyde, of Hemidesmus indicus root, an Indian medicinal plant. H. indicus bioactive preparations were analyzed by reverse flow micellar electrokinetic chromatography (MEKC) using sodium taurodeoxycholate as the surfactant. A pH 2.5 phosphate buffer (50 mM) was supplemented with 65 mM of sodium taurodeoxycholate to produce the MEKC pseudostationary phase; because of the suppression of the electroosmotic flow, the migration of the partitioned analytes was toward the capillary anodic end. The use of a short fused-silica capillary (8.5 cm effective length; 50 μm i.d.) allowed the separation of phytomarkers, including vanillin and salicylaldehyde (reported as additional metabolites of H. indicus roots), in less than 8 min. The method showed good validation parameters and was applied to the analysis of methanol extracts and a root decoction of H. indicus, a promising botanical drug. The obtained results were compared to those from an independent high-performance liquid chromatography–mass spectrometry method. The 2-Hydroxy-4-methoxybenzaldehyde, 2-hydroxy-4-methoxybenzoic acid, and 3-hydroxy 4-methoxybenzaldehyde were found in all samples confirming their roles as phytomarkers. The absence of vanillin and salicylaldehyde suggested that these latter compounds should not be regarded as characteristic components of the bioactive preparations from the plant roots.     

Separation of 4-dimethylamino-6-(4-methoxy-1-naphthyl)-1,3,5-triazine-2-hydrazine derivatives of carbonyl compounds by reversed-phase capillary electrochromatography

4-Dimethylamino-6-(4-methoxy-1-naphthyl)-1,3,5-triazine-2-hydrazine (DMNTH) is a novel derivatizing reagent specially designed for the determination of carbonyl compounds. In this work, we describe the separation of DMNTH-derivatized carbonyl compounds by reversed-phase capillary electrochromatography (CEC). After systematic investigations of the effects of experimental conditions viz. pH and concentration of buffer, type of stationary phase, injection volume of sample, organic modifier, and temperature, optimal conditions were found. The sample compounds, which were separated with gradient high performance liquid chromatography (HPLC), were separated by CEC under isocratic elution due to the high efficiency. Comparisons of separations by CEC and micellar electrokinetic chromatography (MEKC) were made.     

Micellar electrokinetic chromatography profiles of human high-density lipoprotein phospholipids

A simple and fast micellar electrokinetic chromatography (MEKC) method was developed to investigate phospholipids isolated from human high-density lipoproteins (HDL). To optimize the MEKC conditions, several factors including bile salt concentration and organic modifier concentration in the separation buffer as well as temperature have been examined. The optimal separation buffer chosen was a mixture of 50 mM bile salts, 30% v/v 1-propanol and 10 mM sodium phosphate (pH 8.5). The applied voltage and temperature selected were 25 kV and 40°C, respectively. Meanwhile, high-salt stacking has been performed for sample pre-concentration to enhance peak sensitivity. Several factors including organic modifier concentration and salt concentration in the sample matrix as well as sample injection time have been optimized. The optimal sample buffer selected was a mixture of 100 mM NaCl and 20% 1-propanol, and the optimal sample injection time selected was 32 s under a pressure of 0.5 psi. Several phospholipid standards including lysophosphatidyl choline, phosphatidyl choline (PC), sphingomyelin, phosphatidyl ethanolamine, phosphatidyl inositol, phosphatidyl serine and phosphatidic acid have been studied using the optimal MEKC method. The MEKC profile of the mixed phospholipid standards showed good separation and reproducibility. The linear ranges for PC and sphingomyelin were 0.025-1.2 and 0.025-2.0 mg/mL, respectively. The concentration limits of detection of PC and sphingomyelin were 0.0156 and 0.0199 mg/mL, respectively. Using phosphatidic acid as an internal standard, precision and accuracy have been measured for PC and sphingomyelin. The intraday and interday quantitative analysis showed good results. The new MEKC method has been used to characterize native, in vitro oxidized and glycated human HDL phospholipids within 16 min. At absorbance 200 nm, two similar peaks were observed for native and oxidized HDL phospholipids, but three peaks were observed for glycated HDL phospholipids. Interestingly, at absorbance 234 nm, distinctively different MEKC profiles were observed for the three HDL phospholipids.     

Analysis of organic components of smokeless gunpowders: high-performance liquid chromatogaphy vs. micellar electrokinetic capillary chromatography

The aim of the present study was to verify the analytical performances of high-performance liquid chromatography (HPLC) and micellar electrokinetic capillary chromatography (MEKC) for the separation and qualitative determination of a selected group of organic components of smokeless gunpowders. The HPLC method was based on a gradient reversed-phase elution with a mobile phase composed of 0.17 M H(3)PO(4)/methanol; detection was performed by UV absorption at the wavelengths of 220, 254, and 270 nm. The MEKC experiments were carried out by using uncoated fused-silica capillaries (50 microm inside diameter, 50 cm effective length) and a running buffer composed of 10 mM sodium tetraborate at pH 9.24 added with 25 mM sodium dodecyl sulfate (SDS); the applied voltage was 25 kV; detection was either at a fixed wavelength UV of 214 nm or with a diode-array detector operating in the wavelength range from 190 to 350 nm. Both reversed-phase HPLC and MEKC techniques succeeded in resolving the tested standard mixtures of organic components of smokeless powders. Although the sequence of elution of the different analytes was slightly different between HPLC and MEKC, a statistical analysis based on the Spearman's rank correlation test showed that the two separation patterns were highly correlated. HPLC and MEKC were comparable in terms of elution/migration time precision, whereas MEKC showed higher reproducibility of peak areas. The interfacing of capillary electrophoresis with diode array UV detection provided distinct UV spectra of the individual analytes, thus improving, on the detection side, the analytical selectivity and identification power of capillary electrophoresis.     

Macromolecular surfactant as a pseudo-stationary phase in micellar electrokinetic capillary chromatography

We examined polymers of sodium 11-acrylamidoundecanoate [poly(Na 11-AAU)] with a very high molecular mass (>10(6)) for their potential use as a pseudo-stationary phase in micellar electrokinetic capillary chromatography (MEKC). Size-exclusion chromatography and capillary electrophoresis studies reveal that the polymers are highly charged, and have a densely packed chain structure. For aromatic compounds, the polymeric surfactant showed significantly different selectivity than sodium dodecyl sulfate (SDS). It was suggested that one molecule of poly(Na 11-AAU) forms one micelle. The structural stability of this pseudo-stationary phase permitted its use with relatively high percentages of organic modifiers in the buffer medium, allowing the separation of highly hydrophobic compounds which are difficult to analyze by conventional MEKC with SDS.     

Determination of nonsteroidal anti-inflammatory drugs in human specimens by capillary zone electrophoresis and micellar electrokinetic chromatography

Therapeutic drug monitoring of anti-inflammatory drugs is necessary for the identification of the agents that cause toxic events and for the decision on the treatment for intoxication. Recently, capillary electrophoresis (CE) has been developed for the simple and rapid analyses of a variety of chemical agents. Micellar electrokinetic chromatography (MEKC) can separate acidic, neutral and basic anti-inflammatory drugs in serum. Furthermore, serum samples are directly applied to the CE system without any pretreatments, and some anti-inflammatory drugs can be separated from serum albumin in the MEKC analysis. On the other hand, capillary zone electrophoresis (CZE) enables us to determine a few microg/mL levels of acidic anti-inflammatory drugs with simple running buffer and stacking technique. A rapid and simultaneous determination of several analgesic anti-inflammatory agents, including ibuprofen, acetaminophen, indomethacin, and salicylic acid in human serum has been developed by using CZE. Therefore, the CZE and MEKC analysis may become a potentially useful alternative to high-performance liquid chromatography (HPLC) and fluorescence polarization immunoassay (FPIA) for therapeutic drug monitoring, particularly in serum of patients suffering from intoxication by overdosage of nonsteroidal anti-inflammatory agents.     

Determination of itraconazole and hydroxyitraconazole in human serum and plasma by micellar electrokinetic chromatography

The electrokinetic separation of the hydrophobic antimycotic drug itraconazole (ITC) and its major metabolite, hydroxyitraconazole (HITC), by a binary aqueous-organic solvent medium containing sodium dodecylsulfate, by microemulsion electrokinetic chromatography (MEEKC) and by micellar electrokinetic chromatography (MEKC) was studied. The results suggest that the first approach is difficult to apply and that there is no substantial difference between separations performed using MEEKC and MEKC modified with n-butanol. The simpler MEKC method is more than adequate and was thus employed for the analysis of ITC and HITC in human serum and plasma. Separation was achieved in plain fused-silica capillaries having a low-pH buffer (pH 2.2) with sodium dodecyl sulfate micelles and reversed polarity. The addition of 2-propanol and n-butanol enhanced analyte solubility and altered the selectivity of the separation by influencing the magnitude of the electrophoretic component in the separation mechanism. Under optimised conditions and using head-column field-amplified sample stacking, an internal standard, ITC and two forms of HITC could be separated in under 9 min, with detection limits less than 0.01 microg/mL. Analysis of samples from patients currently prescribed ITC revealed a different HITC peak area ratio to that of the standards, suggesting a stereoselective component of ITC metabolisation. Comparison of MEKC data with those of a HPLC method employed on a routine basis showed excellent agreement, indicating the potential of this approach for therapeutic drug monitoring of ITC.     

Isolation and purification of flavonoid and isoflavonoid compounds from the pericarp of Sophora japonica L. by adsorption chromatography on 12% cross-linked agarose gel media

A method for isolation and purification of flavonoid and isoflavonoid compounds in extracts of the pericarp of Sophora japonica L. was established by adsorption chromatography on the 12% cross-linked agarose gel Superose 12. The crude extracts were pre-separated to two parts, sample A and sample B, on a D-101 macroporous resin column by elution with 20% ethanol and 40% ethanol, respectively. Samples A and B were then separated by adsorption chromatography on Superose 12 with 40% methanol as the mobile phase. Eight compounds including four kinds of flavonoids and four kinds of isoflavonoids were obtained by the proposed method. The adsorption mechanisms of flavonoids and isoflavonoids on Superose 12 were also discussed.     

Evaluation of variation of acteoside and three major flavonoids in wild and cultivated Scutellaria baicalensis roots by micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC) conditions were developed to analyze the constituents of Scutellariae Radix (SR) and Scutellaria baicalensis roots. Using the MEKC method, the major flavonoid constituents of baicalin, baicalein and wogonin of wild and cultivated S. baicalensis roots were compared. In a preliminary comparison of electropherogram, one special peak was found in a wild sample but not in a 2-year-cultivated one. The compound corresponding to the peak was isolated and identified as a phenylethanoid glycoside, acteoside, by comparing the 1H- and 13C-NMR spectral data with that of the authentic compound. This is the first time acteoside has been isolated from the Scutellaria genus. It could only be found in SR derived from wild S. baicalensis roots and 4-year-cultivated plants, but not in plant materials cultivated for 3 years. Applying the MEKC method established in this study, rapid and simultaneous determinations of acteoside together with 3 flavonoids in samples were achieved. The method can thus be used for the quality control of SR in a shorter analysis period than HPLC.     

Comparative study of capillary zone electrophoresis and micellar electrokinetic chromatography for the separation of twelve aromatic sulphonate compounds

Summary Two modes of capillary electrophoresis (CE), capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC), were investigated for the separation of 12 aromatic sulphonate compounds. In CZE, although the voltage applied, the buffer concentration and the pH were optimized for effective separation of the compounds studied, under the best conditions four of the five amino compounds coeluted, as did naphthalene-1-sulphonic acid and naphthalene-2-sulphonic acid. In MEKC, sodium dodecyl sulphate (SDS) and Brij 35 were chosen as the anionic and nonionic surfactants and the effect of the concentration of micelles was examined. The effect of adding methanol as the organic modifier was also investigated with each of these micellar systems. All the analytes, including the isomers, were completely separated by use of MEKC with Brij 35 but when SDS was used only 11 compounds were separated because two amino compounds coeluted.     

Matrix effects and selectivity issues in LC-MS-MS

Summary Chlorobenzenes, triazine and phenylurea herbicides were separated by normal micellar electrokinetic chromatography (MEKC) and by micellar electrokinetic chromatography with reversed flow (RF-MEKC) in running buffers containing organic solvents. The relationship between the two techniques is similar to that between reversed-phase and normal-phase HPLC. Using RF-MEKC, the separation of lipophilic compounds is often improved compared to normal MEKC. The migration in MEKC and in RF-MEKC was characterised by lipophilic and polar indices. The experimental values of the lipophilic indices of the compounds tested in the two techniques were close to the indices in reversed-phase HPLC (RP-HPLC). This enables the use of the indices determined in RP-HPLC for predicting the effects of changing composition of the running buffers on migration times in MEKC and in RF-MEKC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, siófok, Hungary, September 2–4, 2001     

Separation of Compounds in Traditional Chinese Medicines Using Comprehensive Two Dimensional Chromatography

Traditional Chinese medicine is an invaluable treasure of the Chinese nationalities. Thousands of natural species that are of pharmaceutical importance have been accumulated. Most of them are plants. Traditional Chinese medicines generally are of unusual complexity. Even a single medicinal material may contain hundreds of compounds. Since these compounds play cooperative roles pharmacologically, it is essential to analyze all compounds as a whole. It is also important for quality controls in each step of productions, such as raw material collection, processing, and manufacturing. A comprehensive two-dimensional separation system coupling capillary high performance liquid chromatography with fast capillary electrophoresis (μ-HPLC-CE) is developed to provide a powerful means to separate such complex samples. In the first dimensional separation, a home-packed micro-HPLC column was used to reduce the consultation of sample injection and avoid sample dilution. The second dimensional analysis was carried out by micellar electrokinetic chromatography(MEKC) considering the fact that most compounds in Chinese medicine are neutrals. In order to achieve high-speed separation^ theory of fast MEKC was extensively studied. Models of the fast MEKC migration behaviors were established. Relationships of theoretical plates vs. electric field strength and column length were derived. It is concluded that maintaining certain column length and applying high-voltage at the ends of the capillary simultaneously are the key points to achieving fast MEKC separation. A pulse-contacting interface was developed for the 2-D μ-HPLC-CE system. CE sampling was carried out in an instant contact of HPLC and CE columns in an optimized timing program. During the short contact period, a certain fraction of HPLC effluent was introduced into the CE capillary. Injection efficiency for such an interface was up to 81%. Relative standard deviation (RSD) of migration times and peak heights for 100 consecutive MEKC. separation were 3.0% and 1.8%, respectively. With this novel 2-D μ-HPLC-CE system, some traditional Chinese medicines were analyzed and hundreds of peaks were observed. For liquorice, over 110 components were fairly resolved. More than 250 peaks were obtained for a compound mixture of Cheng-Qi-Tang. The peak capacity of this novel comprehensive 2-D HPLC-CE system was estimated to be about 2400 in 80 min.