Determination of refractive and volatile elements in sediment using laser ablation inductively coupled plasma mass spectrometry

Wet-milling protocol was employed to produce pressed powder tablets with excellent cohesion and homogeneity suitable for laser ablation (LA) analysis of volatile and refractive elements in sediment. The influence of sample preparation on analytical performance was also investigated, including sample homogeneity, accuracy and limit of detection. Milling in volatile solvent for 40 min ensured sample is well mixed and could reasonably recover both volatile (Hg) and refractive (Zr) elements. With the exception of Cr (−52%) and Nb (+26%) major, minor and trace elements in STSD-1 and MESS-3 could be analysed within ±20% of the certified values. Comparison of the method with total digestion method using HF was tested by analysing 10 different sediment samples. The laser method recovers significantly higher amounts of analytes such as Ag, Cd, Sn and Sn than the total digestion method making it a more robust method for elements across the periodic table. LA-ICP-MS also eliminates the interferences from chemical reagents as well as the health and safety risks associated with digestion processes. Therefore, it can be considered as an enhanced method for the analysis of heterogeneous matrices such as river sediments.     

Frontiers in elemental analysis by mass spectrometry

New developments in inductively coupled plasma mass spectrometry (ICP-MS) and laser desorption-time-of-flight mass spectrometry (LD-TOF-MS) for inorganic analysis are described. These include fundamental studies of the ion extraction, process in ICP-MS, development of a highly efficient nebulizer, isotope tracer studies, measurement of elemental speciation by liquid chromatography with ICP-MS detection and characterization of the structures of solids by ion association. The possibilities of determining inorganic species in solutions by electrospray MS are also described.     

Laser ablation – reflections on a very complex technique for solid sampling

This paper is an attempt to point out the complex correlations between the experimental conditions in solid sampling by lasers. In particular, the influence of the laser properties, the surrounding gas, and the matrix on the analytical results of laser ablation techniques, such as laser induced breakdown spectrometry or laser ablation–ICP–MS, will be discussed.     

Vacuum-assisted headspace solid phase microextraction: Improved extraction of semivolatiles by non-equilibrium headspace sampling under reduced pressure conditions

A new headspace solid-phase microextraction (HSSPME) procedure carried out under vacuum conditions is proposed here where sample volumes commonly used in HSSPME (9 mL) were introduced into pre-evacuated commercially available large sampling chambers (1000 mL) prior to HSSPME sampling. The proposed procedure ensured reproducible conditions for HSSPME and excluded the possibility of analyte losses. A theoretical model was formulated demonstrating for the first time the pressure dependence of HSSPME sampling procedure under non equilibrium conditions. Although reduced pressure conditions during HSSPME sampling are not expected to increase the amount of analytes extracted at equilibrium, they greatly increase extraction rates compared to HSSPME under atmospheric pressure due to the enhancement of evaporation rates in the presence of an air-evacuated headspace. The effect is larger for semivolatiles whose evaporation rates are controlled by mass transfer resistance in the thin gas film adjacent to the sample/headspace interface. Parameters that affect HSSPME extraction were investigated under both vacuum and atmospheric conditions and the experimental data obtained were used to discuss and verify the theory. The use of an excessively large headspace volume was also considered. The applicability of Vac-HSSPME was assessed using chlorophenols as model compounds yielding linearities better than 0.9915 and detection limits in the low-ppt level. The repeatability was found to vary from 3.1 to 8.6%.     

Magnetic solid phase extraction as a valuable tool for elemental speciation analysis

Despite the increasing number of articles on trace elemental speciation with magnetic solid phase extraction (MSPE), there are no dedicated reviews that cover the group of elements with most related literature, and hence the need for this one. This article provides a comprehensive review of the relevant literature related to Cr, Hg, As, Se, and other metals and metalloids with a special focus on the sorbents, species determined, interactions involved between them and applications, mainly to environmental, food and biological samples. Moreover, this review covers the analysis of metallic nanoparticles (NPs) and the ions that are generated from them as a new facet of speciation. The analytical performance of the methods is addressed from a presentative and critical point of view and, finally, future trends and the related challenges are shown.     

电感耦合等离子体质谱激光烧蚀固体进样技术新进展

本文简单地介绍了电感耦合等离子体质谱(LA-ICP-MS)的基本原理及装置。分别对LA-ICP-MS在飞秒激光器、紫外激光器、固液气溶胶混合进样、集合式小样品标样、原位统计分布技术上的技术新进展进行了详细的评述。     

Ionic liquids as a tool for determination of metals and organic compounds in food analysis

Ionic liquids (ILs) are non-molecular solvents, which are mainly characterized as possessing low melting points, low-to-negligible vapor pressures, and high thermal stability. Their unique solvation properties, coupled to the fact that they can be structurally tailored for specific applications, have increased study of ILs in many areas of fundamental and applied chemistry. Thus, ILs have successfully been utilized as novel solvents in different extraction and microextraction schemes in recent years, but mainly with environmental samples.Food samples are quite complicated matrices from an analytical point of view. They contain a large range of chemical substances, and sometimes they also have a high fat content. Even with the most advanced analytical techniques, food sampling and food-sample preparation prior to the analytical determination are labor-intensive and time-consuming, and normally require relatively large amounts of organic solvents.In this review, we summarize the most recent analytical developments aimed at employing ILs as a tool in food analysis. We discuss practical applications to determine metals and organic compounds in food samples of quite different natures, with special emphasis to the extraction step at which the IL is introduced, and the advantages of the IL-based methods developed over conventional extraction methods.     

Ionic liquids in sample preparation

Due to their unique properties, their good extractabilities for various target analytes, and the fact that many compounds are highly soluble in them, room-temperature ionic liquids (ILs) are used as promising alternatives to the traditional organic solvents employed in sample preparation. ILs have been used as extraction solvents for a wide range of analytes, from environmental contaminates to biomacromolecules and nanomaterials, and as dissolution solvents for various detection techniques. In this paper, the main applications of ILs in sample preparation are reviewed, and the problems and challenges in this area are described.     

A new optimization strategy for gaseous phase sampling by an internally cooled solid-phase microextraction technique

This study describes a new optimization strategy for internally cooled solid-phase microextraction based on a multivariate approach. The coating temperature was changed in an extraction while manipulating the extraction times to improve the extraction of compounds with different volatilities. Polycyclic aromatic hydrocarbons (PAHs) and phthalic acid esters (PEs) and adipate were used as model compounds in this study. The optimization strategy was in two steps: (1) multivariate optimization of extraction time and initial coating temperature and (2) multivariate optimization of total extraction time and the time required to cool the coating to a lower temperature as determined in step 1. The observed analytical response in relation to the coating temperature was found to be dependent on the analyte volatility and size. The optimized extraction condition for PEs was 23 min extraction while maintaining the coating at 140°C, followed by 7 min of cooling the coating at 10°C. For the PAHs the coating temperature was maintained at 60°C for the first 20 min and at 5°C in the last 20 min of extraction. Comparisons have been made between the proposed optimized conditions with the conventional internally cooled fiber approach and the results thoroughly discussed. The proposed optimization strategy was found to be more effective for all the analytes, especially for the semi-volatiles, compared to the conventional method.     

A new peptide docking strategy using a mean field technique with mutually orthogonal Latin square sampling

The theoretical prediction of the association of a flexible ligand with a protein receptor requires efficient sampling of the conformational space of the ligand. Several docking methodologies are currently available. We propose a new docking technique that performs well at low computational cost. The method uses mutually orthogonal Latin squares to efficiently sample the docking space. A variant of the mean field technique is used to analyze this sample to arrive at the optimum. The method has been previously applied to explore the conformational space of peptides and identify structures with low values for the potential energy. Here we extend this method to simultaneously identify both the low energy conformation as well as a ‘high-scoring’ docking mode. Application of the method to 56 protein–peptide complexes, in which the length of the peptide ligand ranges from three to seven residues, and comparisons with Autodock 3.05, showed that the method works well. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cold-induced aggregation microextraction: a novel sample preparation technique based on ionic liquids

In this research, a novel microextraction technique based on ionic liquids (ILs) termed cold-induced aggregation microextraction (CIAME) is developed. In this method, very small amounts of 1-hexyl-3-methylimidazolium hexafluorophosphate [Hmim][PF₆] and 1-hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide [Hmim][Tf₂N] (as extractant solvents) were dissolved in a sample solution containing Triton X-114 (as an anti-sticking agent). Afterwards, the solution was cooled in the ice bath and a cloudy solution was formed. After centrifuging, the fine droplets of extractant phase were settled to the bottom of the conical-bottom glass centrifuge tube.CIAME is a simple and rapid method for extraction and preconcentration of metal ions from water samples and can be applied for the sample solutions containing high concentration of salt and water miscible organic solvents. Furthermore, this technique is much safer in comparison with the organic solvent extraction.Performance of the technique was evaluated by determination of the trace amounts of mercury as a test analyte in several real water samples. Michler thioketone (TMK) was chosen as a complexing agent. Analysis was carried out using spectrophotometric detection method. Type and amount of IL and the surfactant, temperature and the other parameters were optimized. Under the optimum conditions, the limit of detection (LOD) of the method was 0.3 ng mL⁻¹ and the relative standard deviation (R.S.D.) was 1.32% for 30 ng mL⁻¹ mercury.     

Parametric evaluation of laser ablation and ionization time-of-flight mass spectrometry with ion guide cooling cell

A novel laser ablation and ionization time-of-flight mass spectrometer has been used for direct elemental analysis of alloys. The system was incorporated with an ion guide cooling cell to reduce the kinetic energy distribution for the purpose of better resolution. Parametric studies have been conducted on the system with respect to the buffer gas pressure and the distance from sample to the nozzle to obtain the maximal signal intensities. In order to obtain satisfactory relative sensitivity coefficients (RSC) for different elements, the influence of the laser irradiance, nozzle voltage, rf frequency and voltage of the hexapole were also investigated. Under the optimized conditions, the RSC of different elements were available for direct semi-quantitative analysis. The mass resolving power (FWHM) of the spectrometer was approximately 7000 (m/Δm) and the limit of detection (LOD) was 10^− 6 g/g.     

固体进样直接测定法测定铜精矿中汞

建立了固体进样直接测定法测定铜精矿中汞含量的方法。铜精矿样品在测汞仪的分解炉中经300℃干燥和750℃高温热分解后,汞被催化分解为汞原子,于850℃齐化成金汞齐。汞蒸气被氧气流带入单波长光学吸收池,在波长253.7 nm处测量汞的吸光度,采用标准曲线法计算汞量。方法的线性范围分别为0~1.00,0~100μg/mL,线性相关系数为0.9999,检出限分别为0.10,0.04 ng/g。5个汞含量不同的铜精矿样品测定结果的相对标准偏差为2.14%~4.35%(n=11),样品加标回收率为92.00%~104.02%。采用该方法分别对2个铜精矿样品和铜精矿国际标准物质进行测定,测定结果与标准分析方法测定值和标准物质标示值基本一致。该方法简便、快速、准确,可以作为标准方法推广使用。     

Elemental mapping and quantitative analysis of Cu, Zn, and Fe in rat brain sections by laser ablation ICP-MS

This report details the application of laser ablation quadrupole ICP-MS for the (multi)elemental mapping of 100-μm-thick sections of rat brain. The laser spot size used was 60 μm, and the laser scan speed was 120 μm s⁻¹. The analysis was relatively rapid, allowing mapping of a whole brain thin section (≈1 cm²) in about 2 h. Furthermore, the method was amenable to multi-element data collection including the physiologically important elements P and S and afforded sub μg g⁻¹ detection limits for the important trace elements Cu and Zn. Calibrations were performed with pressed pellets of biological certified reference materials, and the elemental distributions and concentrations of Cu, Zn, and Fe were determined in whole rat brain sections. The distributions and concentration ranges for these elements were consistent with previous studies and demonstrate the utility of this technique for rapid mapping of brain thin sections.     

Determination of lead in hair and its segmental analysis by solid sampling electrothermal atomic absorption spectrometry

A rapid and practical solid sampling electrothermal atomic absorption spectrometric method was described for the determination of lead in scalp hair. Hair samples were washed once with acetone; thrice with distilled-deionized water and again once with acetone and dried at 75 °C. Typically 0.05 to 1.0 mg of dried samples were inserted on the platforms of solid sampling autosampler. The effects of pyrolysis temperature, atomization temperature, the amount of sample as well as addition of a modifier (Pd/Mg) and/or auxiliary digesting agents (hydrogen peroxide and nitric acid) and/or a surfactant (Triton X-100) on the recovery of lead were investigated. Hair samples were washed once with acetone; thrice with distilled-deionized water and again once with acetone and dried at 75 °C. Typically 0.05 to 1.0 mg of dried samples were inserted on the platforms of solid sampling autosampler. The limit of detection for lead (3σ, N = 10) was 0.3 ng/g The addition of modifier, acids, oxidant and surfactant hardly improved the results. Due to the risk of contamination and relatively high blank values, the lead in hair were determined directly without adding any reagent(s). Finally, the method was applied for the segmental determination of lead concentrations in hair of different persons which is important to know when and how much a person was exposed to the analyte. For this purpose, 0.5 cm of pieces were cut along the one or a few close strands and analyzed by solid sampling.     

An on‐line sample pretreatment technique for the HPLC analysis of plant samples

A continuous‐flow, on‐line sample pretreatment technique using a silica gel microsyringe extractor has been developed. All steps including extraction, separation, clean‐up, and concentration occur in the microsyringe. The overall sample pretreatment process takes <10 min per sample. Different polarity chemicals in the plant sample are successively extracted and separated, and analyzed in parallel using HPLC–UV and HPLC–UV–MS/MS. Polycyclic aromatic hydrocarbons, alkylphenols, and plant hormones were determined as model compounds for nonpolar, intermediate polarity, and polar fractions, respectively. All the parameters that influence the extraction and separation efficiency of the microsyringe extractor have been optimized and evaluated. Under the optimized conditions, recoveries of target compounds ranged from 78.4 to 101.9%, the RSD was <12.8% and the square of the correlation coefficient was >0.99. Complex plant samples of Sambucus Mandshurica Kitag have been tested using this method. Fluorene, phenanthrene, pyrene, and plant hormones were detected in all the samples, and concentrations ranged from 24.2–34.9, 43.8–67.1, 25.9–29.2, and 14.5～110.8 ng/g, respectively.     

Use of sol–gels as solid matrixes for laser-induced breakdown spectroscopy

Silicon, zirconium and aluminum sol–gels were investigated as suitable starting materials for tunable matrix calibration standards for laser-induced breakdown spectroscopy. A fast and simple preparation method was developed, using aluminum i-propoxide as the precursor in the sol–gel synthesis, which allows one to quickly prepare solid calibration standards offering very homogenous analyte distribution in the matrix, low optical spectral background, as well as reproducible behavior towards laser ablation and vaporization. The surface of the calibration targets and the morphology of the ablation craters were examined by optical and scanning electron microscopy, and the material ejection process was observed by shadowgraph imaging. Low μg/g detection limits and 4–15% relative standard deviation were measured by laser induced breakdown spectroscopy for Pb, Cr and Be used as internal standards.     

A review of solid phase extraction: Basic principles and new developments

Summary A review with 178 references on the basic principles and recent developments in the solid phase extraction is presented. New solid phases, chromatographic modes, experimental configurations and off-line and on-line automated devices are discussed.     

Problems in obtaining precise and accurate Sr isotope analysis from geological materials using laser ablation MC-ICPMS

This paper reviews the problems encountered in eleven studies of Sr isotope analysis using laser ablation multicollector inductively coupled plasma mass spectrometry (LA-MC-ICPMS) in the period 1995–2006. This technique has been shown to have great potential, but the accuracy and precision are limited by: (1) large instrumental mass discrimination, (2) laser-induced isotopic and elemental fractionations and (3) molecular interferences. The most important isobaric interferences are Kr and Rb, whereas Ca dimer/argides and doubly charged rare earth elements (REE) are limited to sample materials which contain substantial amounts of these elements. With modern laser (193 nm) and MC-ICPMS equipment, minerals with >500 ppm Sr content can be analysed with a precision of better than 100 ppm and a spatial resolution (spot size) of approximately 100 μm. The LA MC-ICPMS analysis of ⁸⁷Sr/⁸⁶Sr of both carbonate material and plagioclase is successful in all reported studies, although the higher ⁸⁴Sr/⁸⁶Sr ratios do suggest in some cases an influence of Ca dimer and/or argides. High Rb/Sr (>0.01) materials have been successfully analysed by carefully measuring the ⁸⁵Rb/⁸⁷Rb in standard material and by applying the standard-sample bracketing method for accurate Rb corrections. However, published LA-MC-ICPMS data on clinopyroxene, apatite and sphene records differences when compared with ⁸⁷Sr/⁸⁶Sr measured by thermal ionisation mass spectrometry (TIMS) and solution MC-ICPMS. This suggests that further studies are required to ensure that the most optimal correction methods are applied for all isobaric interferences.