有机硅聚合物负载硫、硫、氮三齿配体铂配合物的合成与催化性能

 N,N-双(β-甲硫乙基)γ-(三乙氧硅基)丙胺用气相法二氧化硅固载,再与氯亚铂酸钾作用,合成了三齿型铂配合物-聚γ-[N,N-双(β-甲硫乙基)胺基]丙基倍半硅氧烷铂配合物.研究了该配合物对烯烃与三乙氧基硅烷的硅氢加成反应的催化特性.     

含双(β-乙硫乙基)胺基配体的有机硅聚合物负载铂配合物的合成及其催化硅氢化性能

N,N—双(β—乙硫乙基)γ—(三乙氧硅基)丙胺单独或与十二烷基三乙氧基硅烷或与苯丙基三乙氧基硅烷共同以气相法二氧化硅固定化,再与氯亚铂酸钾反应,合成三种含双(β—乙硫乙基)胺基的高分子配体及其铂配合物。它们都是烯烃与三乙氧基硅烷的硅氢加成反应的有效催化剂。     

聚γ-(β-氰乙基)胺丙基硅氧烷铂配合物的合成与催化性能

γ-氨丙基三乙氧基硅烷与丙烯腈反应，得到γ-(β-氰乙基)胺丙基三乙氧基硅烷。后者用气相法二氧化硅固载，再与氯亚铂酸钾反应，合成了聚γ-(β-氰乙基)胺丙基硅氧烷铂配合物。研究了它对不饱和烃与三乙氧基硅烷的硅氢加成反应的催化特性。     

二氧化硅固载硫、氮杂冠醚铂配合物的合成及其催化烯烃硅氢化性能

二(β-氯乙基)烯丙胺与3,6-二氧杂辛-1,8-二硫醇在乙醇钠存在下关环缩合,得到具有烯基侧链的1,7-二硫杂-10,13-二氧杂-4-氮杂-4-烯丙基环十五烷.后者通过硅氢加成、二氧化硅固载.再与氯亚铂酸钾反应,合成了一种新型有机硅聚合物负载硫、氮杂冠醚及其铂配合物.该配合物对于烯烃硅氢加成反应具有良好的催化性能.     

聚苯乙烯负载氨基硒醚铂配合物的合成及其催化性能

β－羟基－β’－二甲氨基二乙基硒醚与氯甲基化聚苯乙烯在二氧六环中及氢化钠存在下缩合，再在丙酮中与氯亚铂酸钾反应，得到聚苯乙烯负载二甲氨基乙基硒醚铂配合物。该配合物对烯烃与三乙氧基硅烷的硅氢化反应具有良好的催化活性。     

聚硅氧烷负载硫、氮-铂双齿配合物的合成及其对烯烃硅氢化的催化作用

γ-巯丙基三甲氧基硅烷与β-氯乙基二甲胺盐酸盐在甲醇钠存在下缩合,得到4-硫杂-6-二甲胺基己基三甲氧基硅烷。后者以气相法二氧化硅固载,再与氯亚铂酸钾反应,合成了二氧化硅固载的聚-4-硫杂-6-二甲胺基己基硅氧烷-铂配合物。它是烯烃硅氢加成的有效催化剂。     

二氧化硅-聚硅氧烷负载硫杂-15-冠-5铂、铑配合物的合成及其催化硅氧化性能

6－(ω'-十一碳烯氧甲基)-1-硫杂-4,7,1O,13-四氧杂环十五烷与三乙氧基硅烷进行硅氢加成,产物依次以气相法二氧化硅固载、氯亚铂酸钾或三氯化铑络合,合成了相应的二氧化硅-聚硅氧烷负载硫杂-15-冠-5-铂、铑配合物,并研究了它们在烯烃与三乙氧基硅烷的硅氢加成反应中的催化性能.结果表明,二者均为硅氢加成反应的高效催化剂.     

杂元素冠醚研究 Ⅷ．10─硫杂苯并－15－冠－5铂配合物催化硅氢化反应的研究

本文通过双（２－羟基乙基）硫酸与１，２一双（２’－对甲苯磺酞氧基乙氧基）苯缩合闭环，得到１０－硫杂苯并－１５－冠－５，后者再与氯亚铂酸钾反应得到标题配合物；同时研究了该配合物对烯烃与三乙氧基硅烷的硅氢加成反应的催化特性，并与硒、碲的类似配合物进行了比较．结果表明，此配合物是烯烃硅氢化反应的高效催化剂．     

[Mo(dtc)4][Er(dtc)4]双金属离子对配合物的合成及其结构表征

本文报道了双金属离子对配合物 [Mo(dtc) 4 ] [Er(dtc) 4 ] (dtc,N、N-二乙基氨基二硫代甲酸根 )的合成 ,并用四圆 X-射线衍射仪测定了配合物的晶体结构 ,同时对配合物的性质进行了较为详细的报道。     

(4S)-4-羧基杂氮硅三环的合成

利用L-N, N-双(β-羟乙基)丝氨酸及L-N, N-双(β-羟乙基)苏氨酸与三乙氧基硅烷或氯烷基三乙氧基硅烷反应合成了具有手性的(4S)-4-羧基杂氮硅三环(1-5), 并运用IR, 1H NMR, EI-MS等手段表征了结构。证据显示存在着贯穿笼状结构的N→Si配键。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

关于"对‘燃料电池物理及化学性能的有限时间热力学分析方法'的讨论”答复

把有限时间热力学理论用于化学过程的研究,将会得到一系列新的结论,开展这方面的研究是很有意义的.文献[1]以燃料电池为例,在同时考虑化学反应及传热不可逆性的情况下,研究了燃料电池的性能界限,文献[2]指出了文献[1]计算化学反应及传热不可逆性而引起系统与有关环境的总熵产生率的错误以及由此而导致的结论所存在的问题,并进行了富有启发性的分析与讨论.但文献[2]对于系统与有关环境的总熵产生率的计算也是不正确的,由此得到的其它结论自然不能成立.本文将就此情况下系统与有关环境的总熵产生率的计算再次进行讨论,并给出电池功率和效率的有限时间热力学性能界限.