Mechanistic insights into the opening of epoxides with trimethylsilyl cyanide - zinc iodide

-2,3-Epoxy-1,7,7-trimethylbicyclo[2.2.1]heptane reacted with trimethylsilyl cyanide in the presence of zinc iodide to produce a complex mixture of products. The major product, -7-trimethylsiloxy- -2,3,3-trimethyl- -2-isocyanobicyclo[2.2.1]heptane was obtained in 72% yield. In addition, eight other products were identified in yields ranging from 10% to 1%. All of the products could be rationalized on the basis of initial generation of a carbocationic intermediate.     

Free-radical-mediated conjugate additions. Enantioselective synthesis of butyrolactone natural products: (-)-enterolactone, (-)-arctigenin, (-)-isoarctigenin, (-)-nephrosteranic acid, and (-)-roccellaric acid

Lewis acid-mediated conjugate addition of alkyl radicals to a differentially protected fumarate 10 produced the monoalkylated succinates with high chemical efficiency and excellent stereoselectivity. A subsequent alkylation or an aldol reaction furnished the disubstituted succinates with syn configuration. The chiral auxiliary, 4-diphenylmethyl-2-oxazolidinone, controlled the stereoselectivity in both steps. Manipulation of the disubstituted succinates obtained by alkylation furnished the natural products (-)-enterolactone, (-)-arctigenin, and (-)-isoarctigenin. The overall yields for the target natural products were 20-26% over six steps. Selective functionalization of the disubstituted succinates obtained by aldol condensation gave the paraconic acid natural products (-)-nephrosteranic acid (8) and (-)-roccellaric acid (9). The overall yield of the natural products 8 and 9 over four steps was 53% and 42%, respectively.     

Electroreductive intramolecular coupling of N-(oxoalkyl)phthalimides: complementary method to samarium(II) iodide reduction

The electroreductive intramolecular coupling of phthalimides with ketones in the presence of chlorotrimethylsilane gave five- and six-membered trans-cyclized products stereospecifically (>99%). Similar electroreductive intramolecular coupling of phthalimides with aldehydes afforded five-, six-, and seven-membered trans-cyclized products stereoselectively (75-93%). On the other hand, the reductive coupling of N-(oxoalkyl)phthalimides with samarium(II) iodide gave cis-cyclized products stereoselectively (88->99%).     

熔融盐对印刷线路板热解影响实验研究

在固定床反应器中进行热解实验,考察不同热解终温、不同熔融盐添加量下印刷线路板热解过程中碳的气相转化率,并对热解液体和固体产物进行特性分析。结果表明,熔融盐的存在可以明显提高热解过程碳的气相转化率,减少液体产物产率。在未添加熔融盐的条件下,热解终温900℃时,碳的气相转化率为35.94%,液体产物产率为28.29%。添加 (71%Na2CO3-29%K2CO3) 熔融盐后,热解终温700℃时,碳的气相转化率为40.76%,液体产物产率为22.34%。添加 (8.3%Na2CO3-91.7%NaOH) 熔融盐后,碳的气相转化率达到59.36%,液体产物产率减少为6.88%。元素分析结果表明,熔融盐的存在可以减少固体残渣中的含碳量,而液体产物的H/C原子比为1.12～1.20。     

Efficient synthesis of 2,2-diaryl-1,1-difluoroethenes via consecutive cross-coupling reactions of 2,2-difluoro-1-tributylstannylethenyl p-toluenesulfonate

2,2-Difluoro-1-tributylstannylethenyl p-toluenesulfonate (2) was reacted with aryl iodides in the presence of 10 mol % of Pd(PPh(3))(4) and 10 mol % of CuI in DMF at 80 °C for 10-20 h to give the cross-coupled products 3 in 35-97% yields. Further coupling reaction of 3 with arylstannanes in the presence of 5 mol % of Pd(PPh(3))(4) and 3 equiv of LiBr in DMF at 100 °C for 2-24 h afforded the desired products 5 in 25-78% yields.     

Photoreaction of 2′-chloro-4-R-benzanilide: synthesis of 2-(4-R-phenyl)-1,3-benzoxazole and 9-R-phenanthridin-6(5H)-one (R=H, CH3, CH3O)

The UV photolysis of 2′-chloro-4-R-benzanilides in acetonitrile solution under nitrogen atmosphere leads to the formation of intramolecular photocyclization products (9-R-phenanthridin-6(5)-one, 20–30%), along with the minor photoreduction, photo-Fries, and intramolecular photosubstitution products. The photoreaction of 2′-chloro-4-R-benzanilide in acetonitrile solution containing 10% of water or aqueous sodium hydroxide however gives 2-(4-R-phenyl)-1,3-benzoxazole as a major product (30%) along with the photoreduction, photo-Fries and intramolecular photocyclization products.     

Method for the determination of catechin and epicatechin enantiomers in cocoa-based ingredients and products by high-performance liquid chromatography: single-laboratory validation

A single-laboratory validation study was performed for an HPLC method to identify and quantify the flavanol enantiomers (+)- and (-)-epicatechin and (+)- and (-)-catechin in cocoa-based ingredients and products. These compounds were eluted isocratically with an ammonium acetate-methanol mobile phase applied to a modified beta-cyclodextrin chiral stationary phase and detected using fluorescence. Spike recovery experiments using appropriate matrix blanks, along with cocoa extract, cocoa powder, and dark chocolate, were used to evaluate accuracy, repeatability, specificity, LOD, LOQ, and linearity of the method as performed by a single analyst on multiple days. In all samples analyzed, (-)-epicatechin was the predominant flavanol and represented 68-91% of the total monomeric flavanols detected. For the cocoa-based products, within-day (intraday) precision for (-)-epicatechin was between 1.46-3.22%, for (+)-catechin between 3.66-6.90%, and for (-)-catechin between 1.69-6.89%; (+)-epicatechin was not detected in these samples. Recoveries for the three sample types investigated ranged from 82.2 to 102.1% at the 50% spiking level, 83.7 to 102.0% at the 100% spiking level, and 80.4 to 101.1% at the 200% spiking level. Based on performance results, this method may be suitable for routine laboratory use in analysis of cocoa-based ingredients and products.     

Synthesis of a new class of highly fluorescent aryl-vinyl benzo[1,2-b:4,5-b′]difuran derivatives

The synthesis of 2-(2-arylvinyl)- and 2,6-di(2-arylvinyl)dibenzo[1,2-b:4,5-b′]furan derivatives for application in optoelectronics is described. Wittig reaction of the triphenylphosphonium bromides derived from diethyl 2,6-dimethylbenzofuro[5,6-b]furan-3,7-dicarboxylate with aryl aldehydes gave the products in 70-99% yield. The corresponding products derived from furfural and cinnamic aldehyde were also obtained. The prepared products reveal UV-Vis fluorescence with quantum yields, varying from 1% to 100%, and may be used as organic small molecule materials for organic light-emitting devices (OLED).     

Synthesis of α,α-difluoro-γ-butyrolactones via ethyl iododifluoroacetate

A novel synthesis of α,α-difluoro-γ-butyrolactones was realized by the alkaline hydrolysis of the adducts of ethyl iododifluoroacetate and alkenes. Ethyl iododifluoroacetate reacted with alkenes in the presence of sodium dithionite to give the addition products in 62-78% yields. The products were hydrolyzed in 10% aqueous sodium carbonate solution to give α,α-difluoro-γ-butyrolactones in 93-98% yields.     

α-Aminoxylation of Ketones and β-Chloro-α-aminoxylation of Enones with TEMPO and Chlorocatecholborane

Oxidation of various cyclic and acyclic ketones under mild conditions with chlorocatecholborane, a bulky pyridine base, and TEMPO to the corresponding α-aminoxylated products in good to excellent yields (52-99%) is described. For enones as substrates, products of a β-chloro-α-aminoxylation are obtained (70-89%).     

Solid-phase microextraction coupled with liquid chromatography for determination of beta-carotene in food

beta-Carotene in vegetables and nutritional products is analyzed using solid-phase microextraction (SPME) coupled with liquid chromatography (LC) to improve the speed of analysis and to reduce the consumption of organic solvents. The relative standard deviations (RSDs) of this analytical method for beta-carotene determinations in vegetables and nutritional products are approximately 10% and 5%, respectively. The amount of beta-carotene was found to vary from 0.35 +/- 0.05 ppm to 76.5 +/- 6.9 ppm for several vegetables in Taiwan. This method was linear over the range of 0.4-40 ppm with correlation coefficients higher than 0.997. The experimentally determined level of beta-carotene in nutritional products varied from 3.8 +/- 0.2 ppm to 24.6 +/- 1.1 ppm following SPME-LC. The recoveries of beta-carotene for these measurements following SPME were all higher than 97% +/- 2% (n = 3). The detection limits of beta-carotene for this method were from 0.027 to 0.054 ppm. Conventional solvent extractions take approximately 4-6 h for extraction and reconcentration but SPME takes approximately 1 h. From several tens to hundreds of milliliters, organic solvents can be saved using SPME. SPME provides better analyses on beta-carotene than conventional solvent extraction for nutritional products in terms of speed, precision, simplicity, and solvent consumption.     

离子色谱法测定净水产品中F-、Cl-、NO-2、No-3、HPO2-4和SO2-4

建立了离子色谱法测定净水产品中的F<'->、Cl<'->、NO<'-><,2>、No<'-><,3>、HPO<'2-><,4>和SO<'2-><,4>6种阴离子.根据净水产品的类型分别选择配制水浸提和直接净化配制水两种方法处理样品,选用IonPac As9-HC色谱柱(250 mm×4 mm),8.0 mm0L/L N...     

Xanthogenation of Lignocarbohydrates by Carbon Disulfide

High-molecular-weight products containing 4.21-10.4% bound sulfur that are soluble (32-86%) in aqueous alkaline solutions are obtained from xanthogenation of lignocarbohydrates by carbon disulfide in the presence of NaOH in propan-2-ol. The degree of preliminary alkaline activation of the raw material in propan-2-ol has the principal effect on the composition and physicochemical properties of the xanthogenation products.     

Atmospheric chemistry of 3-pentanol: kinetics, mechanisms, and products of Cl atom and OH radical initiated oxidation in the presence and absence of NOX

Smog chamber/FTIR techniques were used to study the atmospheric chemistry of 3-pentanol and determine rate constants of k(Cl+3-pentanol) = (2.03 +/- 0.23) x 10 (-10) and k(OH+3-pentanol) = (1.32 +/- 0.15) x 10 (-11) cm (3) molecule (-1) s (-1) in 700 Torr of N 2/O 2 diluent at 296 +/- 2 K. The primary products of the Cl atom initiated oxidation of 3-pentanol in the absence of NO were (with molar yields) 3-pentanone (26 +/- 2%), propionaldehyde (12 +/- 2%), acetaldehyde (13 +/- 2%) and formaldehyde (2 +/- 1%). The primary products of the Cl atom initiated oxidation of 3-pentanol in the presence of NO were (with molar yields) 3-pentanone (51 +/- 4%), propionaldehyde (39 +/- 2%), acetaldehyde (44 +/- 4%) and formaldehyde (4 +/- 1%). The primary products of the OH radical initiated oxidation of 3-pentanol in the presence of NO were (with molar yields) 3-pentanone (58 +/- 3%), propionaldehyde (28 +/- 2%), and acetaldehyde (37 +/- 2%). In all cases the product yields were independent of oxygen concentration over the partial pressure range 10-700 Torr. The reactions of Cl atoms and OH radicals with 3-pentanol proceed 26 +/- 2 and 58 +/- 3%, respectively, via attack on the 3-position to give an alpha-hydroxyalkyl radical, which reacts with O 2 to give 3-pentanone. The results are discussed with respect to the literature data and atmospheric chemistry of 3-pentanol.     

Spontaneous hydrolysis reactions of cis- and trans-beta-methyl-4-methoxystyrene oxides (Anethole oxides): buildup of trans-anethole oxide as an intermediate in the spontaneous reaction of cis-anethole oxide

Rates and products of the reactions of trans- and cis-beta-methyl-4-methoxystyrene oxides (1 and 2) (anethole oxides) and beta,beta-dimethyl-4-methoxystyrene oxide (3) in water solutions in the pH range 4-12 have been determined. In the pH range ca. 8-12, each of these epoxides reacts by a spontaneous reaction. The spontaneous reaction of trans-anethole oxide (1) yields ca. 40% of (4-methoxyphenyl)acetone and 60% of 1-(4-methoxyphenyl)-1, 2-propanediols (erythro:threo ratio ca. 3:1). The spontaneous reaction of cis-anethole oxide is more complicated. The yields of diol and ketone products vary with pH in the pH range 8-11, even though there is not a corresponding change in rate. These results are interpreted by a mechanism in which 2 undergoes isomerization in part to the more reactive trans-anethole oxide (1), which subsequently reacts by acid-catalyzed and/or spontaneous reactions, depending on the pH, to yield diol and ketone products. The buildup of the intermediate trans-anethole oxide in the spontaneous reaction of cis-anethole oxide was detected by (1)H NMR analysis of the reaction mixture. Other primary products of the spontaneous reaction of 2 are (4-methoxyphenyl)acetone (73%) and threo-1-(4-methoxyphenyl)-1,2-propanediol (ca. 3%). The rates and products of the spontaneous reaction of 2 and its beta-deuterium-labeled derivative were determined, and the lack of significant kinetic and partitioning deuterium isotope effects indicates that the isomerization of 2 to ketone and to trans-anethole oxide must occur primarily by nonintersecting reaction pathways.     

超快速液相–质谱法同时测定液体奶和奶粉中磺胺和喹诺酮类药物残留

建立超快速液相–质谱联用法测定乳制品中磺胺和喹诺酮类药物残留的方法。试样加入乙腈沉淀蛋白,用0.22μm滤膜过滤,经EndeavorsilTMC18柱分离,选用乙腈–0.1%甲酸为流动相。在0.05~100.00μg/L范围内,17种兽药的质量浓度均与色谱峰面积均呈良好的线性,相关系数(r2)为0.990 6~0.999 8,方法检出限为0.05~0.10μg/kg,加标回收率为75.88%~116.00%,测定结果的相对标准偏差为1.5%~13%(n=5)。该方法快速、灵敏,可以满足对乳制品中多种兽药残留的快速检测要求。     

Intramolecular,Interrupted Homo-Nazarov Cascade Biscyclizations to Angular (Hetero)Aryl-Fused Polycycles

Herein, a SnCl₄-catalyzed intramolecular, interrupted homo-Nazarov cascade biscyclization to access angular (hetero)aryl-fused polycycles is reported. Subsequent decarboxylation of the readily enolizable products afforded the angular products in up to 71 % yield over two steps, with the trans-diastereomers as the major products. The cyclopropyl homo-Nazarov cyclization precursors were formed using a scalable and modular synthetic route that, ultimately, offers access to 6,6,6-, 6,6,5-, 6,5,6-, 6,6,5,6-, and 6,6,6,5-fused angular polycyclic products. To showcase the rigor and utility of the method, an 8-step total synthesis of (±)-1-oxoferruginol, an antibacterial aromatic abietane diterpenoid, was disclosed.     

Heterocyclisation of substituted ylidenethiocarbonohydrazides using dimethyl acetylenedicarboxylate

A facile and rapid procedure for the synthesis of dimethyl-2-[3-amino-5-(2-methoxy-2-oxoethylidene)-4-oxothiazolidin-2-ylidenehydrazono]succinate, dimethyl {[2-alkylidenehydrazono)-5-(2-methoxy-2-oxoethylidene)-4-oxothiazolidin-3-yl)amino]succinate and methyl (4-amino-5-oxo-3-thioxo-2,3,4,5-tetrahydro-1,2,4-triazine-6-yl)acetate affording yields of 61–54 %, 22–18 % and 14–11 %, respectively, via a condensation reaction of dimethyl acetylenedicarboxylate (DMAD) with (substituted ylidene)thiocarbonohydrazides. One of the products was conclusively confirmed by single-crystal X-ray analysis. A mechanism for the formation of the products is presented.     

Photoinduced electron transfer cyclizations of aryl-linked phthalimides

The photochemistry of arene-linked phthalimides incorporating the carboxylate or thioether donor group was investigated. Simple N-phthalimidophenyl alkanoates exclusively gave photoreduction (CO₂H/H-exchange) products. In contrast, ω-phthalimido-meta-phenoxy carboxylates underwent photodecarboxylative cyclizations in yields of 6-48%. Likewise, catechol-linked derivatives furnished analogue cyclization products in 18-38% yield. Using the photodecarboxylation protocol, macrocyclic target compounds with ring sizes up to 17 could thus be realized. Two model phthalimides containing a thioether branch at the ortho-position of the arene-linker gave the analogue seven-membered cyclization products in yields of 28% and 35%, respectively.     

Enantioselective functionalisation of the C-2' position of 1,2,3,4,5-pentamethylazaferrocene via sparteine mediated lithiation: potential new ligands for asymmetric catalysis

The s-BuLi-sparteine base combination deprotonated the C-2' position of 1,2,3,4,5-pentamethylazaferrocene and subsequent reaction with a range of electrophiles gave C-2 substituted products in 76-93% yield and approximately 80% ee. The products could be recrystallised to enrich ee's to >90%. Resubjection of the initial addition products ( approximately 80% ee) to the deprotonation conditions led to a kinetic resolution to give products with >90% ee and superior overall yields compared to recrystallisation for the cases where the electrophiles were Ph2CO, MeI and Ph2S2. Transmetallation of the 2-lithiopentamethylazaferrocene ( approximately 80% ee) with ZnCl2 allowed palladium catalysed cross coupling with a variety of C-2 haloaryl, heteroaryl and vinyl groups to give some novel C-2' substituted pentamethylazaferrocene derivatives in 61-77% yield in 80% ee. Potential N,N-chelate ligands were recrystallised to >95% ee. A novel C2-symmetric bis-pentamethylazaferrocene could be synthesised by an iron catalysed oxidative coupling of the enatioenriched C-2 lithio derivative and in the presence of a PhMe-Et2O solvent mixture proceeded in 97% ee.