Polysiloxane-Modified Mesoporous Materials

We report the preparation of polysiloxane-modified mesoporous silica gels derived from the acid catalysed hydrolysis of tetraethoxysilane (TEOS) and oligomeric silanol terminated polydimethylsiloxane (PDMS) in the presence of the non-ionic surfactant, octaethylene glycol monohexadecyl ether. The gels were characterised using thermal gravimetric analysis (TGA), infra-red (IR) spectroscopy, X-ray diffraction (XRD) and ²⁹Si solid state cross-polarisation (CP) magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. TGA and IR spectroscopy showed the loss of surfactant after calcination and a decrease in the Si–OH band at 950 cm^–1 indicated further condensation had occurred. This was confirmed by the increase in Q⁴ at –110 ppm, in ²⁹Si MAS NMR spectroscopy, which also showed that calcination had led to the redistribution of PDMS forming a T species. XRD data showed ordering within the structure, with an initial d-spacing of 45 Å, decreasing to 35 Å after calcination.     

Synthesis of PDMS-Based Porous Materials for Biomedical Applications

Polydimethylsiloxane (PDMS) and tetraethoxysilane (TEOS)-based porous organically modified silicates (ORMOSILs) for biomedical applications were synthesized through a sol-gel process, using sucrose particles as templates. These materials were characterized by ²⁹Si CP-MAS NMR spectroscopy, thin film X-ray diffraction, and scanning electron microscopy. Their bioactivity was evaluated using a simulated body fluid (SBF) of Kokubo recipe. These materials had a bimodal porous structure with pores of 300–500 m and 10–50 m in diameter. NMR showed that the silanol groups of the PDMS chain cross-linked to silica derived from the hydrolysis and condensation of TEOS. The samples containing Ca(II) exhibited apatite deposition on the pore walls within 3 days in SBF.     

29Si MAS-NMR Study of Silica Gels and Xerogels: Influence of the Catalyst

Four silica gels were prepared by hydrolysis of tetraethoxysilane (TEOS) in ethanol, using different catalysts: HCl, NaOH, NH₃, and NBu₄F. Nitrogen adsorption-desorption isotherms indicated that the HCl-catalyzed xerogel was purely microporous, whereas the other samples exhibited a very broad distribution of mesopores and a variable amount of micropores. ²⁹Si MAS NMR spectroscopy of the wet gels (before drying) pointed to a low degree of condensation for the HCl-catalyzed gel, and to the presence of unhydrolyzed TEOS monomer in the NaOH-catalyzed gel. Comparison with the ²⁹Si MAS NMR spectra of the xerogels indicated a significant increase of the degree of condensation during the drying procedure (3 hrs at 120°C under vacuum) for the HCl-catalyzed gel.     

一种新型有机-无机杂化介孔碱性催化材料的合成与表征

通过直接合成方法, 制备了胺基功能化的HMS型有机无机杂化介孔碱性催化材料(Amx-HMS).采用粉末X射线衍射分析、透射电镜、氮气吸附-脱附、29Si固体核磁共振、 红外光谱和元素分析等方法对合成材料进行了表征. 通过典型的2'-羟基苯基甲基酮和苯甲醛缩合制备黄烷酮的反应对其碱催化活性中心进行了表征.     

Key factor affecting the basicity of mesoporous silicas MCM-41: effect of surfactant extraction time and Si/Al ratio

Mesoporous silica Si-MCM-41 was prepared by hydrothermal method using TEOS and CTAB as the source of silica and structuring agent, respectively. The surface of the as-synthesized material was treated using HCl/ETOH solvent to remove the CTA surfactant instead of using the calcination. Characterization of the catalysts was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen sorption at 77 K, scanning and transmission electronic microscopy (SEM, TEM), and thermogravimetric analysis TGA. The catalytic properties of the prepared materials in the condensation of acetophenone with ethyl cyanoacetate were studied. The effects of the catalyst type, Si/Al ratio, reaction kinetics, and reaction temperature were also investigated to find an optimal parameter. The results show that an interesting yield was obtained (about 96%) in a short reaction time; it is found that the yields of products depend not only on the amount of surfactant inside the mesopores but also on the Si/Al ratio. The catalyst reuse shows that this catalyst can be used up to five cycles, and at temperatures higher than 50 °C, the yield of products decreases due to the slight destruction of the catalyst as confirmed by the XRD analysis. Based on the results obtained, a possible mechanism of the condensation reaction of acetophenone was proposed.     

Mesoporous silica materials with an extremely high content of organic sulfonic groups and their comparable activities with that of concentrated sulfuric acid in catalytic esterification

Mesoporous silica materials (HS-JLU-20) with an extremely high content of mercaptopropyl groups have been successfully synthesized using fluorocarbon-hydrocarbon surfactant mixtures through a simple co-condensation approach of tetraethyl orthosilicate (TEOS) and (3-mercaptopropyl)trimethoxysilane (MPTS), which are characterized by X-ray diffraction (XRD), nitrogen adsorption and desorption isotherms, transmission electron microscopy (TEM), CHNS elemental analysis, thermogravimetry analysis (TGA), and (29)Si NMR spectroscopy. The results show that HS-JLU-20 samples with molar ratios of MPTS/(MPTS + TEOS) at 0.5-0.8 in the starting synthetic gels still show their mesostructures, while HS-SBA-15 with the molar ratio of MPTS/(MPTS + TEOS) at 0.50 completely loses its mesostructure in the absence of fluorocarbon surfactant. Possibly, fluorocarbon surfactant containing N(+) species with a positive charge could effectively interact with negatively charged mercapto groups in the synthesis of HS-JLU-20 materials, resulting in the formation of mesoporous silicas with good cross-linking of silica condensation even at an extremely high content of organic mercapto groups. More interestingly, after the treatment with hydrogen peroxide, HSO(3)-JLU-20 materials with an extremely high content of organic sulfonic groups exhibit comparable activity with liquid concentrated sulfuric acid in catalytic esterification of cyclohexanol with acetic acid.     

Mesoporous Silica Materials Synthesized via Sol-Gel Methods Modified with Ionic Liquid and Surfactant Molecules

Mesoporous silica materials were synthesized via a sol-gel method employing a room temperature ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, bmimBF4) as a new solvent medium and further modified with surfactant (hexadecyl-trimethyl-ammonium bromide, CTAB) as a pore templating material. The synthesized samples were characterized by the transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption techniques. The results indicated that the mesoporous silica synthesized by using bmimBF4 and CTAB as mixed templates showed better mesostructural order and smaller pore size, compared with mesoporous silica materials synthesized by using single bmimBF4 as template under the same conditions. This indicates that the presence of surfactant can affect the microstructures of silica prepared by the present synthesis method.     

Hybrid-coatings derived from pyromellitic acid bridged alkoxy-silylalkyl precursors

To achieve high temperature stable insulation materials for the electrical insulation of fine copper wires two different bis(alkoxysilylalkyl)pyromellitamide acids 1 and 2 were prepared. These organic–inorganic sol–gel hybrid precursors were obtained via reactions of pyromellitic dianhydride and alkoxysilylalkylamines. The molecular single-source precursors 1 and 2 were comprehensively studied using FT-IR, ¹H, ¹³C and ²⁹Si NMR spectroscopy as well as elemental analyses. Besides, the hydrolysis and condensation processes of the different precursors were examined with solution ²⁹Si NMR spectroscopy. The imidization process was investigated using ¹³C NMR spectroscopy, FT-IR spectroscopy as well as thermal analysis methods. The different precursors were applied to coat fine copper wires using an industrial coating device. The obtained coatings were cured at temperatures between 380 and 425 °C, and tested regarding thicknesses, number of pinholes, electrical breakdown voltage and elongation. FT-IR spectroscopy was used to determine the chemical structure and scanning electron microscopy to investigate the morphology of the coating materials. The obtained coatings showed very promising mechanical, thermal and electrical properties, i.e. highest breakdown voltage values well above 200 V/µm. They possess high flexibility without cracking and no pinholes or other defects were detected.     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

Synthesis and Characterization of the Titanium Containing Mesoporous Molecular Sieve MCM-48

Ti-MCM-48 mesoporous materials have been synthesized by sequential addition of alkoxides. The atomic ratio of Si and Ti in the synthesis gel was 40 and 5, respectively. The materials were characterized by means of powder XRD, N₂ adsorption-desorption measurements, HREM, ²⁹Si MAS NMR, diffuse reflectance FT-IR spectroscopy, electrophoretic mobility measurements and electron probe microanalysis.     

Synthesis and Characterization of the Titanium Containing Mesoporous Molecular Sieve MCM-48

Ti-MCM-48 mesoporous materials have been synthesized by sequential addition of alkoxides. The atomic ratio of Si and Ti in the synthesis gel was 40 and 5, respectively. The materials were characterized by means of powder XRD, N₂ adsorption-desorption measurements. HREM, ²⁹Si MAS NMR, diffuse reflectance FT-IR spectroscopy, electrophoretic mobility measurements and electron probe microanalysis.     

A facile method for the synthesis of copper modified amine-functionalized mesoporous zirconia and its catalytic evaluation in C-S coupling reaction

A new copper modified amine functionalized zirconia has been synthesized by a co-condensation method using zirconium butoxide and aminopropyltriethoxy-silane (APTES) in the presence of a cationic surfactant CTAB followed by impregnation of copper. Nitrogen adsorption-desorption, X-ray powder diffraction, Fourier-transform infrared spectroscopy (FT-IR), (13)C nuclear magnetic resonance (NMR), scanning electron micrography (SEM), transmittance electron micrography (TEM), thermo gravimetric analysis-differential thermal analysis (TGA-DTA), X-ray photoelectron spectroscopy (XPS) and UV-vis DRS spectroscopic tools are used to characterize the materials. FT-IR and DRS results indicated the incorporation of Cu and amino groups on the surface of zirconia. This Cu-anchored mesoporous material acts as an efficient, reusable catalyst in the aryl-sulfur coupling reaction between aryl iodide and thiophenol for the synthesis of value added diarylsulfides.     

Fluorescence probing investigation of the mechanism of formation of MSU-type mesoporous silica prepared in fluoride medium

The mechanism of formation of a MSU-type siliceous material from tetraethyl orthosilicate (TEOS) in the presence of the nonionic surfactant tergitol T-15-S-12, sulfuric acid, and sodium fluoride has been investigated using mainly fluorescence probing techniques and, to a lesser extent, dynamic light scattering (DLS) and 29Si NMR spectroscopy. The tergitol micelles present in the systems obtained by progressively generating the reaction mixture giving rise to the mesostructured material by adding to an appropriate tergitol solution sulfuric acid, TEOS, and NaF were characterized by fluorescence probing (micelle aggregation number, micropolarity, and microviscosity) and also by dynamic light scattering (apparent micelle diameter). 29Si NMR experiments were also performed on selected systems after hydrolysis of the TEOS. The fluorescence probing techniques were also used to follow the changes of micelle characteristics with time during the evolution of the full reaction mixture from a limpid solution to a system containing a minor amount of condensed siliceous material. The synthesized solid material was characterized by X-ray diffraction and nitrogen adsorption-desorption analyses. The micelle aggregation number N was found to change only little, and the micropolarity remained constant when going from the tergitol solution to the full reaction mixture. The results of DLS measurements agree with this finding. Besides, while the condensation of silica took place after addition of NaF, the N value increased only very little with time up to the point where a small amount of mesostructured material precipitated out. These results indicate that the interaction between tergitol micelles and the siliceous species formed in the system by the hydrolysis of TEOS and also between micelles and the growing siliceous species must be very weak. As in our previous studies of the mechanism of formation of MCM41-type material from sodium silicate in the presence of cetyltrimethylammonium bromide, it appears that the locus of formation of the mesostructured material is not the micelle surface but the bulk phase. Micelles only act as reservoirs of surfactant providing surfactant monomer that binds to the growing siliceous species.     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

A silica-silver nanocomposite obtained by sol-gel method in the presence of silver nanoparticles

Silver nanoparticles (AgNPs) were obtained by a redox reaction, using a glucose-containing cyclosiloxane as a reduction agent and stabilizer. Then the AgNPs aqueous solution was used as the reaction medium for the sol-gel process, starting from tetraethylorthosilicate (TEOS) as silica precursor. The nanocomposite material resulted (SilAg) after solvent removal, aging and calcination and was investigated by infrared spectroscopy (FT-IR), atomic force microscopy (AFM), scanning electron microscopy coupled with energy dispersive X-ray system (SEM/EDX), transmission electron microscopy (TEM), energy-dispersive X-ray fluorescence spectroscopy (EDXRF), X-ray diffraction (XRD) and dynamic vapor sorption (DVS). The results were compared to model silicas obtained without silver. A higher condensation degree in SilAg was obtained due to the basic medium used in the first step and was confirmed by a sorption capacity lower than for the model silicas. The solid surface area calculated with GAB analysis using DVS data for the water vapors is 210 m² g^?1. The nanocomposite showed good catalytic activity for hydrogen peroxide decomposition.      

The interaction of dibutyltin dilaureate with tetraethyl orthosilicate in sol-gel systems

Sols composed of dibutyltin dilaureate (DTL) and tetraethyl orthosilicate (TEOS) were prepared using a mixture of methyl ethyl ketone (MEK) and acetone as the solvent in order to study the interaction between the oligomeric Sn and Si species. The hydrolysis molar ratio r (r=nH₂O/nM (M: Si, Sn or Si+Sn) was 2. The use of an acid or basic catalyst was avoided, as the sols are intended to be used in the formulation of potential stone consolidants. The sols were studied by several spectroscopic techniques including Small Angle X-ray Scattering (SAXS), ²⁹Si and ¹¹⁹Sn NMR, Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD). According to the spectroscopic results the lauric acid produced by the hydrolysis of DTL modifies the condensation path of the Si species, leading to the formation of two types of oligomeric chains: linear swollen and multiparticle diffusion-limited aggregates, depending on the molar ratio Sn/Si. The ²⁹Si NMR results indicated that the hydrolysis of DTL catalizes the condensation of the Si species, giving as a result higher condensation extents of the Si species in the Sn-Si sols compared to a pure Si sol. Based on the Radial Distribution functions (RDF) and the FTIR results, heterocondensation occurred.     

Preparation of mesoporous submicrometer silica capsules via an interfacial sol-gel process in inverse miniemulsion

Mesoporous silica capsules with submicrometer sizes were successfully prepared via the interfacial hydrolysis and condensation reactions of tetraethoxysilane (TEOS) in inverse miniemulsion by using hydrophilic liquid droplets as template. The inverse miniemulsions containing pH-controlled hydrophilic droplets were first prepared via sonication by using poly(ethylene-co-butylene)-b-poly(ethylene oxide) (P(E/B)-PEO) or SPAN 80 as surfactant. TEOS was directly introduced to the continuous phase of an inverse miniemulsion. The silica shell was formed by the deposition of silica on the surface of droplets. The formation of capsule morphology was confirmed by transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The mesoporous structure was verified by nitrogen sorption measurements. The specific surface area could be tuned by the variation of the amount of cetyltrimethylammonium bromide (CTAB) and TEOS, and the pore size by the amount of CTAB. The influences of synthetic parameters on the particle size and morphology were investigated in terms of the amount of CTAB, pH value in the droplets, TEOS amount, surfactant amount, and type of solvent with low polarity. A formation mechanism of silica capsules was proposed.     

THE EFFECT OF SOLVENT POLARITY ON THE CONDENSATION OF HYDROLYZED TETRAETHYLORTHOSILICATE IN MICROEMULSION GELS

A study of the condensation of hydrolyzed tertaethylorthosilicate (TEOS) was conducted to investigate the influence of solvent polarity. A non-aqueous microemulsion was formed to which was added water (pH 1) and TEOS. The various condensation products were observed with ²9Si NMR of systems of differing amounts of formamide and decanol/decane at increasing time intervals. The solvent polarity of the solvent system was found to clearly influence the initial and final rates of condensation, despite the fact that the specific condensed moieties were the same in each of the systems studied.     

Coating of Tetraethylorthosilicate (TEOS)/Vinyltriethoxysilane (VTES) Hybrid Solution on Polymer Films

Tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) hybrid materials were prepared and the hydrolysis and condensation reactions during processing were investigated by means of 29Si NMR solution spectroscopy. The variation of drying characteristics of the coating films was examined with respect to the tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) ratio, as well as drying temperature, by FT-IR spectroscopy. It is shown that the TO mode of Si–O–Si stretching absorption was enhanced with increasing tetraethylorthosilicate (TEOS) content and drying temperature. Also, the wettability of the coating films on polymer films was independent of the solution composition but enhanced by the precoating of poly(4-hydroxystrene) (PHS) as a wetting agent. The adhesion between the coating and the films was also enhanced when the vinyltriethoxysilane (VTES) content in the coating solution was increased.     

MCM-48介孔材料相转化合成的形成机制

利用水热合成的方法,使用新型的表面活性剂十六烷基三甲基对苯磺酸盐作为模板剂合成了高质量的MCM-48介孔分子筛,并用X-射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HRTEM)以及N₂吸附-脱附进行了表征。合成过程的研究表明该合成体系经历了三相,起始相为具有六方对称性的MCM-41,随着加热时间的延长,生成了具有立方对称性的MCM-48,进一步延长加热时间则生成了层状相MCM-50。三相转变发生的核心驱动力来自于表面活性剂有效堆积参数g因子的改变。另外,XRD、傅立叶变换的红外光谱(FT-IR)以及固体魔角自旋核磁共振(²⁹Si MAS NMR)的表征结果证明：随着晶化时间的延长,相转变的同时伴随着介孔材料的孔壁逐渐由原子无序的非晶态向原子有序的晶态结构转变。最终形成的原子有序层状介孔分子筛可以作为扩孔型微孔分子筛合成的有效前驱体。