β混合随机变量序列加权和的收敛性

本文研究了混合随机变量序列加权和的收敛性.利用Utev, S.和Peligrad, M不等式得到了混合随机变量序列加权和的收敛性定理及Hajeck-Rènyi型不等式,推广和改进了W.F,Stout,吴群英,J.Hajeck和A.Rènyi.的相应结论.     

群的融合自由积的几种广义Fratttini子群

M.K.Azarian将C.Y.Tang的一个引理推广到了下拟Frattini子群的情况,并且还提出了两个公开问题.为了回答这两个问题,进一步研究了群的融合自由积的一些广义Frattini子群,并且得到了一些结果.     

具有超抛物型极限方程的非线性奇摄动反应扩散问题

讨论了一类具有超抛物型方程的反应扩散问题.首先,证明了比较定理.其次,构造了形式渐近解.然后,利用微分不等式方法,研究了问题解的存在、唯一性和渐近性态.最后得到了原问题解的渐近展开式.     

一类具有跳跃层的非线性反应扩散系统的渐近行为

讨论了一类具有跳跃层的反应扩散系统.首先,求出了问题的外部解.其次,引入伸长变量,构造了跳跃层校正项.最后,利用微分不等式理论,得到了原问题解的一致有效的渐近展开式.从而研究了相应问题的解的渐近性态.     

空中加油问题的递推模型与调度策略

首先对空中加油问题进行了分析,提取了相关性质,在此基础上建立了问题的递推模型.根据该模型,提出了一种启发式搜索算法.该算法计算复杂度低,适用性好.对应于辅机是否可以多次起飞,该算法分为两子算法.对这两种不同情况下的具体问题,设计了相关的优化函数.所有算法都在计算机中运行,并得到了相应结果.值得指出的是,提出的启发式搜索算法十分高效.对于问题1和问题2,该算法所得解是约束条件下的最优调度策略.对于问题3,问题4,问题5,该算法所得解逼近最优调度策略.     

关于z.Ditzian定理

1987年Z.Ditzian提出了反映Bernstein算子收敛阶与所逼近函数光滑模之间关系的一个定理,并在α+β≤2情形下给出了这个定理的证明.对于α+β》2情形,Z.Ditzian给出了猜想.1992年周定轩证明了Z.Ditzian的猜想,完成了Z.Ditzian定理的证明.本文对于Z.Ditzian定理给出了一个新的直接证明,这个证明不需要讨论α,β的情况,而且还将Z.Ditzian定理拓广到Bernstein算子线性组合上.     

关于N.A.Menger PN-空间中概率收缩偶与非线性方程组的解的注记

引进了(Φ,Δ)-型概率收缩偶的概念,它简化并减弱了张石生给出的概率收缩偶的定义。在N.A.Menger PN-空间中研究了具有这类概率收缩偶的非线性算子方程组的解的存在性与唯一性问题。改进并推广了M.Altman,A.C.Lee,W.J.Padgett,张石生等人的相应结果。     

多维布朗运动的几个极限定理

本文研究了d(≥3)维布朗运动离开起点a.s.趋向无穷远的速度问题,获得了精密的结果.作为推论,给出了一个有趣的重对数律.同时,我们也给出了布朗运动靠近起点的相应性质.     

不对称柔性壁管道内幂律流体蠕动传输的精确解

在不对称管道内,研究了壁面柔曲性对非Newton流体蠕动流的影响.流变学性质由幂律流体本构方程表征.在数学表达中,采用了长波和低Reynolds数近似.得到了流函数和速度的精确解.给出了流线图及其俘获现象.对所讨论的流动,陈列了关键参数的显著特征,并最后给出了主要结论.     

Maxwell流体在有限长管道中作不稳定的蠕动传输:食道吞咽进程分析

解析地研究了有限长管道中Maxwell流体的不稳定蠕动传输.管壁受到不超过静止边界的收缩波作用.对无量纲形式的方程,应用长波长近似进行分析.导出了轴向速度和径向速度的表达式,评估了沿波长和管道长度方向的压力.讨论了回流现象,确定了回流极限区域.对食道中咀嚼食物(如面包、蛋白等)传输的数学公式给出了物理上的解释.可以看出,与Newton流体相比,Maxwell流体有利于在食道中的流动.与Takahashi等[Rheology,1999,27:169-172]的实验结果相符合.进一步揭示了松弛时间既不影响剪应力,也不影响回流极限.发现了压力的峰值,对整数值波列是相同的,而对非整数值波列是不同的.     

The generalized hierarchical product of graphs

A generalization of both the hierarchical product and the Cartesian product of graphs is introduced and some of its properties are studied. We call it the generalized hierarchical product. In fact, the obtained graphs turn out to be subgraphs of the Cartesian product of the corresponding factors. Thus, some well-known properties of this product, such as a good connectivity, reduced mean distance, radius and diameter, simple routing algorithms and some optimal communication protocols, are inherited by the generalized hierarchical product. Besides some of these properties, in this paper we study the spectrum, the existence of Hamiltonian cycles, the chromatic number and index, and the connectivity of the generalized hierarchical product.     

城市老旧居住小区交通环境评价指标与评价方法

定量的评判城市老旧居住小区整体交通环境质量并进而科学有效的提出老旧小区交通环境更新与改善措施,对城市老旧居住小区交通环境进行了调查,明确了老旧居住小区存在的突出交通问题,并提出了城市老旧居住小区交通环境评价的指标体系,包括行人跨路出行指数、无人行道路段长度占比、停车泊位供需比、路内非法停车占比、平均停车步行距离、泊位数量户数比、人均步行空间、无障碍通道、盲道设置比例、非机动车泊位供需比、地面停放车辆数小区面积比、外部穿行交通周转量小区面积比等。并给出了具体指标的计算方法与获得办法。以长沙市四个典型老旧居住小区为例,对评价方法进行了论证,并得到城市老旧居住小区存在的一般问题,包括人车混杂、人车交织现象严重,停车泊位短缺、车辆乱停乱放,交通设施、特别是弱势群体交通设施缺乏。给出的评价指标、评价方法与结论可为城市老旧小区改造更新,特别是其中很重要的交通环境更新提供决策依据。     

Rolling-ball method for estimating the boundary of the support of a point-process intensity

We suggest a generalisation of the convex-hull method, or ‘DEA’ approach, for estimating the boundary or frontier of the support of a point cloud. Figuratively, our method involves rolling a ball around the cloud, and using the equilibrium positions of the ball to define an estimator of the envelope of the point cloud. Constructively, we use these ideas to remove lines from a triangulation of the points, and thereby compute a generalised form of a convex hull. The radius of the ball acts as a smoothing parameter, with the convex-hull estimator being obtained by taking the radius to be infinite. Unlike the convex-hull approach, however, our method applies to quite general frontiers, which may be neither convex nor concave. It brings to these contexts the attractive features of the convex hull: simplicity of concept, rotation-invariance, and ready extension to higher dimensions. It admits bias corrections, which we describe and illustrate through implementation.     

Analysis of the Stress State of the Surface Layer of a Polymeric Mass upon Filling of Bulky Compression Molds

The stress state of the surface layer of a polymeric mass during filling of bulky compression molds is analyzed. It is shown that, at particular rheological characteristics of the mass, temperature, and filling rates, cracking of the surface layer occurs, which leads to defects in the finished products. A physical analysis of this process makes it possible to conclude that the cracks arise due to the normal stresses operating in the front region of the moving polymeric mass. It is found that, under certain flow conditions, areas with a pressure lower than the atmospheric one appear on the surface of the polymer. If the tensile stresses arising in these local regions are higher than the tensile strength of the mass, the continuity of the composition is broken in the direction determined by the greatest rate of the normal deformation. To confirm the reliability of the crack-formation mechanism proposed, the distribution of the pressure and normal stresses over the free surface is calculated based on a numerical method. These calculations show that, by comparing the stress level achieved in the front region with the tensile-strength characteristics of the polymeric composition, it is possible to predict, with a sufficient accuracy, the possibility of crack formation in the surface layer of such a mass under given flow conditions and thus to solve the question on flawless manufacturing of products.     

Development of the Tangent Modulus from the Euler-Problem to Nonsmooth Materials

History and development of the tangent modulus from the origins to the recent nonsmooth damaging versions are presented. Load history and stability analyses of structures of nonlinear reversible or irreversible materials are based on the concept of tangent modulus. Generally, instantaneously changing tangent modulus is needed and the solution yields iteration process. In the case of inelastic problems, the switch from loading to unloading of the material behaviour results in nonsmooth material functions. Nonsmooth, generally saw-tooth like behaviour happens in composite, laminated or rock type materials, or in the interaction of concrete and the reinforcement, too. Recently, damage and localization are in the focus of structural analyses, extending the tangent modulus to the negative cases, as well. Consequently, an overview of the history and development of the tangent modulus containing the recent modifications seems to be necessary. On the other hand, the more than a century long history of the tangent modulus is a marvellous study of the parallel development of mechanics and mathematics, by following the mutual inspiring effect of them through the activity of such pioneers like P.D. Panagiotopoulos in creating Nonsmooth Mechanics.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

Quality rating of a metal matrix-diamondcomposite from its thermal conductivity and electric resistance

The efficiency of hot-pressed diamond-containing composite materials (DCM) for various tool applications is greatly affected by microdefects, namely, the residual porosity of the metal matrix, damaged diamond grains, and imperfect diamond-matrix interfaces. An instrumental evaluation of these microdefects, predetermining the quality of a tool equipped with DCM, is rather difficult due to the small size, the nonstandard shape, and the strong heterogeneity of specimens. Proposed here is an alternative, nondestructive technique of DCM quality rating, which includes the measurement of electric resistance and thermal conductivity of diamond-containing composites and processing the obtained data by the methods of composite mechanics. It exploits the fact that diamond, being a dielectric, possesses an extremely high thermal conductivity, which allows estimating the residual porosity of a sintered metal matrix from the ratio of specific electric resistances, one being measured and another predicted by a theory. These data, in turn, are utilized to predict the thermal conductivity ofDCMwith an imperfect matrix. Matching with experiments, after solving the inverse problem gives the thermal resistance of diamond-matrix interface, which, within the frame work of the given model, simulates the damage of both the diamond grains and their bonds with the matrix. Thus, the numerical rating of quality is given in terms of two dimensionless parameters. The first one, 0 < K < 1, reflects the quality of the sintered metal matrix, whereas the second one, 0 < R <1, is an aggregate measure of the integrity of diamond grains and the perfection degree of composite interfaces. The quite satisfactory agreement observed between the theory and experiment confirms the efficiency of the technique and the reliability of the data obtained. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 361–374, May–June, 2006.     

Calculation of damage and of force relaxation in amorpho-crystalline polymers

The dynamics of damage and of the relaxing force in amorpho-crystalline polymers under constant strain are calculated using the formulas for the probability of rupture of a deformed polymer molecule and a model representation of amorphous interlayers. The main parameters of the model are the maximum and minimum possible deformations of molecular chains, the energy of rupture activation, the function of the chain length distribution, the temperature, the macroscopic strain, and the relative dimensions of the amorphous interlayer. The conformity of the theoretical model and the association of the relaxation spectrum with the internal molecular and structural characteristics of the material are established.Zhambyl Technical Institute of Light and Food Industry, Taraz, Kazakhstan. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 4, pp. 499–508, July–August, 1999.     

The limiting state of a rigidly fixed nonlinearly elastic multilayer rod

The loss of the load-carrying capacity of a nonlinearly elastic multilayer rod is investigated. The rod, whose layers have various thickness and are made of different materials, is rigidly fixed at both its ends. Rigid contact conditions between the layers are assumed. The problem posed is solved by using the variational method of mixed type in combination with the Rayleigh-Ritz method. The initial analysis is reduced to the solution of the Cauchy problem for a nonlinear ordinary differential equation solved for the first derivative. As the initial condition, the maximum initial eccentricity of the rod is assumed. In the case of zero eccentricity, the Shanley critical force for an axially compressed rod is determined. For a three-layer rod whose outer layers have equal thickness and are made of the same material, numerically, for various degrees of nonlinearity, the effect of physicomechanical and geometric parameters on the critical load of buckling instability is determined. It is found that, by matching the heterogeneity of the rod, it is possible to raise its load-carrying capacity. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 347–360, May–June, 2006.     

Dispersed failure of an anisotropic flywheel

Based on a hereditary damage model of solids, the strength of a cylindrically anisotropic flywheel is calculated. By using a failure criterion, the location and time of initial failure is determined in relation to an anisotropy parameter, for which the ratio of rigidities in the tangential and radial directions is taken. The process of dispersed failure depends on the expansion intensity of the damaged zone. The boundary of the zone is the failure front, whose equations of motion are obtained in the cases of absence and presence of a residual strength for the material behind the failure front. In the second case, the damaged material is modeled by an isotropic elastic medium with considerably reduced values of strength and rigidity characteristics, and variations in the pressure on the failure front are also determined. Graphs of the radial coordinate of failure front as a function of time are constructed and analyzed for different values of the anisotropy parameter, the degree of residual strength and density behind the failure front, and proportions of geometrical sizes of the flywheel. The critical failure times are found. A system of restrictions on the values of mechanical and geometrical parameters is revealed which makes possible the realization of the process of dispersed failure investigated.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 93–108, January–February, 2005.