Selective Fluorescence Turn‐On Sensing of Phosphate Anion in Water by Tetraphenylethylene Dimethylformamidine

A tetraphenylethylene (TPE) derivative bearing two dimethylformamidine units was synthesized. The dihydrogen chloride salt of this TPE derivative was soluble in water and showed almost no emission. By addition of phosphate anions, the dihydrogen chloride salt could be transformed into the monohydrogen chloride salt, which was barely soluble and emitted strong fluorescence through aggregation‐induced emission (AIE), while many other anions could not bring about a fluorescence enhancement. Meanwhile, the dihydrogen chloride salt and monohydrogen chloride salt could be reversible transformed by addition of acid and base alternately in the presence of phosphate anion, which led to fluorescence turn‐on and turn‐off. Therefore, the TPE dimethylformamidine holds potential for selectively sensing phosphate anions in water and use as fluorescence pH switch. This study provided a new approach to AIEgen sensors by using formamidine groups.     

Dissolution of solid NaCl nanoparticles embedded in supersaturated water vapor probed by molecular dynamic simulations

The dissolution process for small, on the order of 1000 atoms, crystalline NaCl particles with defects embedded in highly supersaturated water vapor was studied by the molecular dynamics (MD) simulation method. We found that a breakdown of the crystal lattice does not occur unless (1) the thickness of water layer covering the surface of salt particles exceeds several molecular layers and (2) there are a considerable number of defects in the crystal. The collapse of the crystal lattice starts when the amount of water taken up by a salt particle reaches about half ( approximately 50%) of the amount of salt in this particle. The number of defects required to initiate subsequent dissolution of the NaCl crystal on the time scale accessible by our simulations ( approximately 40 ns) is in the range of 10 to 12%. We also report the estimates for the time required to form supersaturated aqueous solutions of NaCl from originally crystalline particles as a function of the number of defects in the crystal.     

双配体Zn(Ⅱ)MOFs材料的构筑及光致发光性能

以2,5-二羟基对苯二甲酸(H 4-DHBDC)和4,4′-联吡啶(4,4′-Dipyridyl)为双配体、Zn(NO 3)2 6H 2O为金属盐,在水/DMF=3∶2(体积比)的溶剂体系中,采用溶剂热法,在120℃时构筑了一种组成为[Zn 2(H 2-DHBDC)(DHBDC)0.5(4,4′-Dipyridyl)1.5]n的Zn(Ⅱ)MOFs材料。利用X-射线单晶衍射(PXRD)、红外光谱(FTIR)、热重分析(TGA)和荧光分光光度法(FS)等,对其晶体结构和性质进行了分析与表征。结果表明,Zn(Ⅱ)MOFs材料属于单斜晶系,P 2(1)/n空间群,且具有三维网状结构。热重分析和荧光分析表明,Zn(Ⅱ)MOFs材料具有良好的热力学稳定性和光致发光性能。     

New lamellar structure formed by an adamantyl derivative of cholic acid

The self-aggregation of the sodium salt of a new adamantyl amide of the 3beta-amino derivative of cholic acid (Na-AdC) in aqueous solution has been investigated by surface tension, dynamic light scattering, fluorescence, small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM) measurements. These last two techniques suggest that a lamellar phase, consisting of charged bilayers of Na-AdC separated by solvent and periodically stacked, is formed in aqueous solution. The structure of the bilayer is inferred from the resolution of the crystal of the compound in its acid form. The adamantyl moieties, which are mutually interlocked, reside in the central region of the bilayer, and the carboxylic groups are directed toward the hydrophilic region. The structure is open enough to allow water molecules to interact with a fluorescence probe located at the central hydrophobic region.     

Re-determination of the crystal structure and investigation of thermal decomposition of the Chugaev’s salt, [Pt(NH3)5Cl]Cl3·H2O

The crystal structure of the salt [Pt(NH₃)₅Cl]Cl₃·H₂O has been re-determined by single crystal X-ray diffraction and the salt has been studied by the thermal analysis. It is shown that one molecule of crystallization water enters into the salt composition. Intermediate products of thermal decomposition of the salt have been isolated and explored by IR spectroscopy and powder X-ray diffraction.     

多孔有机盐单晶的合成及各向异性质子导电性能

以cis,cis-1,3,5-三氨基环己烷·3HBr和均苯四甲酸在室温下通过离子键构筑了具有规整形貌和大尺寸的晶态多孔有机盐CPOS-10, 其具有较好的热稳定性和永久多孔性. 得益于规整形貌及大尺寸单晶, 首次实现了对多孔有机盐单晶各向异性质子导电性能的研究, 并结合晶体结构探索了各向异性质子导电的机理. 结果表明, 水分子浓度对CPOS-10质子电导率的大小具有重要作用, 骨架内水分子浓度高的晶面更易于与极性基团构成氢键网络, 促进质子传导, 利用此网络的质子传导具有更高的质子电导率. 因此, 骨架内水分子的不均匀分布是导致单晶各向异性质子导电的主要原因. 对CPOS-10单晶各向异性质子导电性能的探索可为研究多孔有机盐的质子导电机理提供重要的依据.     

States of water adsorbed on perindopril crystals

The relationship between the structural state of adsorbed water, the crystal structure of the substances, and the solubility of the perindopril salt C₁₉H₃₂N₂O₅ · C₄H₁₁N in water was studied by IR spectroscopy and X-ray diffractometry. The high-frequency shift of the stretching vibrations of adsorbed water and the solubility depend on the crystal structure of the drug substance. A reversible chemical reaction occurred between the adsorbed water and the perindopril salt.     

Electrical conductivity of lyotropic phases of dodecylbenzenesulphonates with Li+, Na+, and K+ ions in water

The electrical conductivity of dodecylbenzenesulphonate (DoBS) ionic lyotropic liquid crystal of the systems: LiDoBS (dodecylbenzenesulphonic acid lithium salt)/water, NaDoBS (dodecylbenzenesulphonic acid sodium salt)/water, and KDoBS (dodecylbenzenesulphonic acid potassium salt)/water were investigated by impedance spectroscopy in the frequency range from 0.5 Hz to 0.5 MHz. The electrical conductivity of lyotropic LiDoBS was higher than that of isotropic phase. The electrical conductivity isotropic KDoBS and NaDoBS was higher than the conductivity of lyotropic ones. The temperature dependence of electrical conductivity was investigated in the systems LiDoBS/water and KDoBS/water for different phases. The activation energy of electrical conductivity is lowest for the normal hexagonal phase LiDoBS/water. Such systems based on anionic surfactants are of interest as the electrolyte for the supercapacitors.     

黄连素-染料木素有机盐水合物的制备、晶体结构及溶解性

合成了黄连素和染料木素的有机盐水合物[C₂₀H₁₈NO₄]⁺·[C₁₅H₉O₅]^-·2.5H₂O·0.5(C₂H₅OH),并测定了其晶体结构。 解析结果表明,该有机盐水合物属于单斜晶系,P2₁/c空间群。 染料木素7取代位的羟基失去了质子变成了染料木素阴离子。 羟基阴离子与4'取代位上的羟基形成了O—H••••O^-氢键,产生了一维的氢键链状结构。 两个水分子通过氢键作用形成了链状结构,并与染料木素阴离子形成二维的氢键结构。 加热失去水分子后,有机盐水合物变成无定型状态。 在乙醇水溶液中悬浮后,无定型可以转变成结晶的水合物结构。 形成黄连素-染料木素有机盐水合物后,染料木素在水中的溶解度略有增加。     

N-[2-(4-Methoxy-phenyl)-ethyl]-2-(quinolin-8-yloxy)acetamide: a receptor for acid binding

Different hydrates of the receptor, N-[2-(4-methoxy-phenyl)-ethyl]-2-(quinolin-8-yloxy)acetamide (I), and its co-crystals with acetic acid and l(+)α-hydroxy-phenylacetic acid are synthesised and their structures are studied. The acids such as acetic acid, l(+)α-hydroxy-phenylacetic acid quench fluorescence of I. The receptor I shows a fluorescence quenching on interaction with perchloric acid in benzene, whereas in methanol the solution of I results in the generation of a new fluorescence emission at higher wavelengths. The crystal structure of the perchlorate salt is determined to explain the protonation behaviour of the receptor I and the perchlorate salt in methanol leads to fluorescence emission at a place different from that of the parent compound.     

Azeotropic-like (congruent melting) phenomena of lamellar liquid crystals

The binary system of water and didecyldimethylammonium bromide (DDeAB), having a double hydrocarbon chain, was found to exhibit exhibit an azeotropic-like phase transition from lamellar liquid crystal to micellar solution. That is, the maximum limiting value of temperatures where the present system is allowed to exist in a lamellar liquid crystal corresponds to the socalled azeotropic point (AZP) or congruent melting point. At this temperature, the compositions of the liquid crystal and micellar solution phases become identical. Upon addition of a small amount of NaBr, the AZP shifts to a high temperature, but the point disappears above 0.375 wt% NaBr in water. The AZP is also increased by adding cholesterol. On the other hand, the transition enthalpies at AZPs are extremely small and almost constant, even if NaBr and cholesterol are added. The sharp DSC peak is observed in the presence of salt, whereas it is broad in the presence of cholesterol. It is considered that salt induces a closely packed state of the liquid crystal phase. Although cholesterol also has an ordering effect on the surfactant aggregates its hydrophobic property increases the phase transition temperature. The phase transition occurs due to a packing change of the hydrocarbon chains of DDeAB molecule from the lamellar to micellar states. The correlation between the movement of AZP and the phase behavior in the presence of salt is also discussed.     

Selective water sorbents for multiple applications, 1. CaCl2 confined in mesopores of silica gel: Sorption properties

This paper presents sorption properties of a selective water sorbent based on mesoporous KSKG silica gel as a host matrix and calcium chloride as a hygroscopic salt. Sorption isobars, isochores and isotherms at T=20–150°C and vapor partial pressures of 8–133 mbar clearly showed two types of water sorption: 1) the formation of solid crystal hydrates at low amounts N of sorbed water, and 2) vapor absorption mainly by the salt solution at higher N. Sorption properties of CaCl₂ crystal hydrates were found to change strongly due to their impregnation into mesoporous silica gel, whereas the solution confinement to the mesopores did not change its water sorption properties with respect to the bulk solution. Isosteric sorption heat was measured to depend on water sorption and to change from 62.5 kJ/mol for solid hydrates to 42.2–45.6 kJ/mol for solution.     

Preparation and disordered crystal structure of (18-crown-6)ammonium isothiocyanate hemihydrate

A crystalline complex salt, (18-crown-6)ammonium isothiocyanate hemihydrate [NH ₄ ⁺ (18C6)]·SCN^?·0.5H₂O, was prepared and studied by single-crystal X-ray diffraction. The crystal structure of this salt is highly disordered: Almost all the constituents (except the water molecule) are disordered over two different orientations: major and less occupied or weakly occupied. The geometric parameters (bond lengths, bond angles, etc.) of the molecular and ionic constituents of the salt were determined with reasonable accuracy, and the crystal packing was elucidated. The sale forms in the crystal a complex tetrahedral supramolecular hydrogen-bonded structure consisting of one water molecule, two complex cations [NH ₄ ⁺ (18C6)], and two SCN^? anions.     

柚皮素三乙胺盐一水合物的制备、晶体结构及溶解度

柚皮素是一种天然黄酮类化合物,几乎不溶于水。利用晶体工程学原理可以有效改善天然产物的溶解性。本文合成了柚皮素和三乙胺的有机盐一水合物[C_(15)H_(11)O_5]-·[C_6H_(16)N]+·H_2O,测定了其晶体结构。解析结果表明,有机盐水合物属于单斜晶系,P2_1/n空间群。柚皮素7取代位的羟基上的质子转移到了三乙胺的N原子上,并形成了N~+—H....O~-氢键。羟基阴离子与4'取代位上的羟基形成了O—H....O~-氢键,产生了一维的氢键链状结构。水分子通过两种氢键作用将一维的氢键链连接成二维的氢键网络。形成三乙胺盐一水合物后,柚皮素在水中的溶解度增加了20倍。     

Mechanism of sodium chloride diossolving in water and the process of the solution aging

By the method of Flicker Noise Spectroscopy (FNS) we studied the process of sodium chloride dissolving in water (3.5 wt %) at 294 K on the level of long-range order formation in liquid. It is established that the process of dissolving the salt includes the following steps: formation of instable colloid particles, instable solvate clusters of the salt ion pairs (iSCIP), instable dissolved polymers of globular type, and 12 h later beginning of a new process of formation stable solvate clusters of the salt ion pairs (sSCIP) and stable polymer globules on their basis. Stroke diagrams of the cluster nano-structure and a model of aging the salt solution are presented. Influence of atmospheric pressure on the SCIP average weight is demonstrated. It is concluded that on the SCIP surface there is a porous layer of solvate water with membrane properties. The cluster structure of the 3.5 wt % solution prepared by dissolving the salt is shown to differ from that of the solution obtained by dilution. The solutions long-range order is formed by the nano dispersion of the water solvated salt crystal nuclei. The mechanism of the solution aging is discussed.     

In situ hydrothermal synthesis of tetrazole coordination polymers with interesting physical properties

Tetrazole compounds have been studied for more than one hundred years and applied in various areas. Several years ago Sharpless and his co-workers reported an environmentally friendly process for the preparation of 5-substituted 1H-tetrazoles in water with zinc salt as catalysts. To reveal the exact role of the zinc salt in this reaction, a series of hydrothermal reactions aimed at trapping and characterizing the solid intermediates were investigated. This study allowed us to obtain a myriad interesting metal-organic coordination polymers that not only partially showed the role of the metal species in the synthesis of tetrazole compounds but also provided a class of complexes displaying interesting chemical and physical properties such as second harmonic generation (SHG), fluorescence, ferroelectric and dielectric behaviors. In this tutorial review, we will mainly focus on tetrazole coordination compounds synthesized by in situ hydrothermal methods. First, we will discuss the synthesis and crystal structures of these compounds. Their various properties will be mentioned and we will show the applications of tetrazole coordination compounds in organic synthesis. Finally, we will outline some expectations in this area of chemistry. The direct coordination chemistry of tetrazoles to metal ions and in situ synthesis of tetrazole through cycloaddition between organotin azide and organic cyano group will be not discussed in this review.     

Rationally Developed Organic Salts of Tolfenamic Acid and Its β‐Alanine Derivatives for Dual Purposes as an Anti‐Inflammatory Topical Gel and Anticancer Agent

A new series of primary ammonium monocarboxylate (PAM) salts of a nonsteroidal anti‐inflammatory drug (NSAID), namely, tolfenamic acid ( TA ), and its β‐alanine derivatives were generated. Nearly 67 % of the salts in the series showed gelling abilities with various solvents, including water (biogenic solvent) and methyl salicylate (typically used for topical gel formulations). Gels were characterized by rheology, electron microscopy, and so forth. Structure–property correlations based on single‐crystal and powder XRD data of several gelator and nongelator salts revealed intriguing insights. Studies (in vitro) on an aggressive human breast cancer cell line (MDA‐MB‐231) with the l ‐tyrosine methyl ester salt of TA ( S7 ) revealed that the hydrogelator salt was more effective at killing cancer cells than the mother drug TA (3‐(4,5‐ di methyl thiazol ‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay); displayed better anti‐inflammatory activity compared with that of TA (prostaglandin E₂ assay); could be internalized within the cancer cells, as revealed by fluorescence microscopy; and inhibited effectively migration of the cancer cells. Thus, the easily accessible ambidextrous gelator salt S7 can be used for two purposes: as an anti‐inflammatory topical gel and as an anticancer agent.     

Systematic Investigation of Molecular Arrangements and Solid‐State Fluorescence Properties on Salts of Anthracene‐2,6‐disulfonic Acid with Aliphatic Primary Amines

Organic salts of anthracene‐2,6‐disulfonic acid (ADS) with a wide variety of primary amines have been fabricated, and their arrangements of anthracene molecules and solid‐state fluorescence properties investigated. Single‐crystal X‐ray studies reveal that the salts show seven types of crystal forms and corresponding molecular arrangements of anthracene moieties depending on the amine, while anthracene shows only one form and arrangement in the solid state. Depending on the molecular arrangements, the ADS salts exhibit various solid‐state fluorescence properties: spectral shift (30 nm) and suppression and enhancement of the fluorescence intensity. Especially the ADS salt with n‐heptylamine (nHepA), which shows discrete anthracene moieties in the crystal, exhibits the highest quantum yield (Φ_F=46.1±0.2 %) in the series of ADS salts, which exceeds that of anthracene crystal (Φ_F=42.9±0.2 %). From these systematic investigations on the arrangements and the solid‐state properties, the following factors are essential for high fluorescence quantum yield in the solid state: prevention of contact between π planes of anthracene moieties and immobilization of anthracene rings. In addition, such organic salts have potential as a system for modulating the molecular arrangements of fluorophores and the concomitant solid‐state properties. Thus, systematic investigation of this system constructs a library of arrangements and properties, and the library leads to remarkable strategies for the development of organic solid materials.     

Resolution of racemic 1-benzyl-5-oxo-3-pyrrolidinecarboxylic acid with enantiopure (S)-phenylalanine N-benzylamide via diastereomeric salt formation

The resolution of racemic 1-benzyl-5-oxo-3-pyrrolidinecarboxylic acid 1, a potent chiral synthon with high pharmacological activity, was investigated with a variety of basic chiral resolving agents via diastereomeric salt formation. The findings in the optimization of resolution conditions aiming at an industrial-scale production revealed that (S)-phenylalanine benzylamide (S)-10 and 2-propanol containing ca. 4 mol % of water to (RS)-1 were the best conditions for obtaining enantiopure less-soluble diastereomeric salt, (S)-1/(S)-10/0.5H₂O (81%, 98% de, E 79%). X-ray crystallographic analysis of the salt clearly revealed that water molecules play a key role in crystallizing the enantiopure salt crystals, while stabilizing the crystal structure via three types of hydrogen-bond network associated with water molecules in addition to usual acid–base hydrogen bond.     

Comparative study of the hydration systems formed during interactions of hydrogen phosphate dianions with putrescine, nor-putrescine and magnesium dications

A comparative study of hydration systems, formed as a result of the interaction between hydrogen phosphate dianions and three naturally occurring cations (putrescine (Put), its nor-homologue (nPut) and magnesium), is presented. On the basis of X-ray data and IR, NMR and calorimetric measurements, we have determined how the structure and physicochemical properties of the cations influence the system of phosphate residue hydration. Our study demonstrates that the stability of the hydration systems depends not only on the character of the bonds used by water to link with other salt components (coordinate or hydrogen bonds), but also on the location of the water molecules in the crystal lattice. In addition, contrary to magnesium salts, the dehydration of diamine (Put and nPut) hydrogen phosphates is reversible. Both dehydration and rehydration processes take place in the solid state. During rehydration, the crystalline anhydrous salt absorbs water molecules from the atmosphere. This leads to the reconstruction of the hydrated salt structure; this means that the salt which is the product of rehydration is identical with that obtained by crystallization from water solution.