Methyl 3-bromomethyl-3-butenoate as an isopentane building block for the stereoselective preparation of (S)-4-methyl-3,6-dihydro-2H-pyran-2-carbaldehyde and (+)-faranal

(S)-4-Methyl-3,6-dihydro-2H-pyran-2-carbaldehyde (3), the common intermediate in the syntheses of the C17-C27 subunit of laulimalide (4) and (+)-faranal (5), the trail pheromone of the pharaoh ant, Monomorium pharaonis, were obtained via transformation of methyl 3-bromomethyl-3-butenoate (1) into allylstannane 2 and subsequent allylation of (benzyloxy)acetaldehyde (6) in accordance with the Keck procedure as the key steps.     

A novel strategy towards the atorvastatin lactone

We describe a novel strategy to the atorvastatin lactone based on a Paal-Knorr synthesis of pyrrole 24 by condensing diketone 23 with primary amine 22. The latter contains the syn-1,3-diol subunit and a benzyl ether function at the other end of the chain. This allowed for manipulations on the pyrrole ring via iodination at C2, metalation with t-BuLi and carboxylation. The obtained acid 26 could be converted via amide formation, debenzylation, oxidation and lactonization to atorvastatin lactone 6. The key building block, 2-((4R,6S)-6-(2-(benzyloxy)ethyl)-2,2-dimethyl-1,3-dioxan-4-yl)ethanamine (22) was obtained by two sequential asymmetric transfer hydrogenative carbonyl allylations according to Krische.     

Detosylation of 3-amino-1-tosylindole-2-carbonitriles using DBU and thiophenol

Attempted detosylation of the 3-amino-1-(p-tosylamino)indole-2-carbonitriles 4a-c using either K₂CO₃ in EtOH or DBU in PhH at reflux gives unexpectedly the 3-(N-p-tosylamino)indole-2-carbonitriles 5a-c, respectively in high yields. Nevertheless, treatment of 1-(p-tosylamino)indoles 4a-c with thiophenol and DBU in PhH at reflux gives the detosylated 3-aminoindole-2-carbonitriles 5a-c. Reaction mechanisms supporting the tosyl migration (4→5) and the reductive detosylation (4→2) are proposed. All new compounds are fully characterised.     

Synthesis of polyfunctional phosphorodithioates and structural analogues mediated by azetidinium ions and epoxides

The nucleophilic ring opening reactions of N,N-dialkyl-3-hydroxy(benzyloxy)azetidinium salts 1 and N,N-dibenzyl-2,3-epoxypropylamine 10 with anions of mono- and dithioacids of phosphorus 2 affords phosphorodithioates (and structural analogues) 3 and 11 possessing S-propyl substituents incorporating 2-hydroxy and 3-dialkylamino functionalities. A strong dependence of the stability of these compounds on structural factors is discussed.     

[4+2] Cycloaddition reactions of 4-sulfur-substituted 2-pyridones with electron-deficient dienophiles

[4+2] Cycloaddition reactions of 4-(phenylthio)-1-tosyl-2-pyridone (6a) and 4-(phenylsulfonyl)-1-tosyl-2-pyridone (6b) with electron-deficient dienophiles 7 (N-methylmaleimide, N-phenylmaleimide, and methyl acrylate) gave new isoquinuclidine products 8-10. The N-tosyl group of 6a and 6b was also efficiently converted to N-alkyl derivatives 6c-f, which showed different stereoselectivity toward reactions with dienophiles 7. Several other dienophiles 15 (dimethyl acetylenedicarboxylate, methyl vinyl ketone, ethyl vinyl ether, and methyl methacrylate) were found not to react with 6a or 6b, but led to the formation of tosyl migration products 4-(phenylthio)-O-tosyl-pyridinol (16a) and 4-(phenylsulfonyl)-O-tosyl-2-pyridinol (16b), respectively. The reactivity, regioselectivity, and stereoselectivity of the cycloaddition reactions were also compared with semi-empirical calculations.     

An unexpected formation of pyrazolopyrimidines during the attempted to obtain 5-substituted tetrazoles from carbonitriles

In this Letter, we described the synthesis of new 5-(5-amino-1-aryl-1H-pyrazole-4-yl)-1H-tetrazoles 2a–c from 5-amino-1-aryl-1H-pyrazole-4-carbonitriles 1a–c as well as the unexpected 1H-pyrazolo[3,4-d]pyrimidine derivatives 6a–c from 5-amino-1-aryl-3-methyl-1H-pyrazole-4-carbonitriles 4a–c, instead of 5-(5-amino-1-aryl-3-methyl-1H-pyrazole-4-yl)-1H-tetrazoles 5a–c as desired. In an attempt to obtain these tetrazole derivatives containing the methyl group at C3-position in the pyrazole ring, the amino group in 5-amino-1-(4-methoxyphenyl)-3-methyl-1H-pyrazole-4-carbonitrile 4c was protected by the reaction with sodium hydride and di-tert-butyl-dicarbonate (Boc). The tetrazole derivative 5c was synthesized from the protected compound 7c using analogue methodology to obtain 2a–c and 6a–c.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Synthesis and thermal behavior of cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene

The cothermolysis of benzoyl(tert-butyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene in a sealed tube at 140 °C for 24 h afforded cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (2 and 3) in a ratio of approximately 1:1 in 66% combined yield. When cis-silacyclohex-4-ene 2 was heated in a sealed tube at 250 °C for 24 h, dyotropic ring contraction took place to give 1-[(tert-butyl)(trimethylsiloxy)(trimethylsilyl)silyl]-3,4-dimethyl-1-phenylcyclopent-3-ene (4), but not trans-2-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (6). The thermolysis of trans-silacyclohex-4-ene 3 under the same conditions, however, afforded two products, 1-silyl-1-phenylcyclopent-3-ene 4 and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclohex-4-ene (5). The theoretical calculations were carried out to characterize the transition states and other local minima, and to evaluate the activation energies for the dyotropic rearrangement of 2 to 4 and 6, and 3 to 4 and 5. The energy barriers between 2 and 4, between 3 and 4, and between 3 and 5 were evaluated to be 188, 191, 192 kJ mol⁻¹, respectively. The energy barrier between 2 and 6, however, was calculated to be 201 kJ mol⁻¹ or higher. These results are consistent with the experimental finding that the thermal isomerization of 2 affords only 4, but 3 produces both 4 and 5.     

A simple synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles

A simple four-step synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8 (or their 1H-pyrazol-3(2H)-one tautomers 8′) as the pyrazole analogues of histamine was developed. First, enamino lactam 3 was prepared as the key intermediate in two steps from 2-pyrrolidinone (1). Next, acid-catalysed ‘ring switching’ transformations of 3 with monosubstituted hydrazines 4 gave N-[(1-substituted 5-hydroxy-1H-pyrazol-4-yl)ethyl]benzamides 7a-k and N-[2-(2-heteroaryl-3-oxo-2,3-dihydro-1H-pyrazol-4-yl)ethyl]benzamides 7′l-o. Benzamides 7a-k and 7′l-o were finally hydrolysed by heating in 6 M hydrochloric acid to furnish 1-substituted 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8a-k and 4-(2-aminoethyl)-2-heteroaryl-1H-pyrazol-3(2H)-ones 8′l-o in good overall yields.     

The conversion of 2-cyano cyanothioformanilides into 3-aminoindole-2-carbonitriles using triphenylphosphine

2-Cyano cyanothioformanilide 3a reacts with triphenylphosphine in the presence of water to give 2-(cyanomethyleneamino)benzonitrile 4a, 2-(cyanomethylamino)benzonitrile 5, 3-aminoindole-2-carbonitrile 2a and (2-cyanoindol-3-yl)iminotriphenylphosphorane 6a. In the presence of p-toluenesulfonic acid in MeOH the reaction between 2-cyano cyanothioformanilide 3a and triphenylphosphine (2 equiv) gives 3-aminoindole-2-carbonitrile 2a in 90% yield. Under the same conditions 2-(cyanomethyleneamino)benzonitrile 4a gives anthranilonitrile 8a, 3-aminoindole-2-carbonitrile 2a and N-(2-cyanophenyl)formamide 9. In addition, substituted 2-cyano cyanothioformanilides 3b-f react with triphenylphosphine and p-toluenesulfonic acid in MeOH to give 3-aminoindole-2-carbonitriles 2b-f in 63-75% yields. Under analogous conditions 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 2g gives only 4,5-dimethoxyanthranilonitrile 8g and 4,6,7-trimethoxyquinazoline-2-carbonitrile 14g, but in refluxing dry PhMe in the absence of p-toluenesulfonic acid 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 3g, (2-cyano-5,6-dimethoxyindol-3-yl)iminotriphenylphosphorane 6g and 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g are obtained. The structure of 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g is supported unambiguously via independent synthesis and comparison to the isomeric 6,7-dimethoxyquinazoline-2-carbonitrile 15. All new compounds are fully characterised and a tentative mechanism for the transformation of 2-cyano cyanothioformanilides to indoles is proposed.     

First cross-coupling reactions on halogenated 1H-1,2,4-triazole nucleosides

The halogenated 1H-1,2,4-triazole glycosides 6-10 were synthesized by BF₃-activated glycosylation of 3(5)-chloro-1,2,4-triazole (2), 3,5-dichloro-1,2,4-triazole (3), 3,5-dibromo-1,2,4-triazole (4), and 3(5)-bromo-5(3)-chloro-1,2,4-triazole (5) with 1,2,3,4-tetra-O-pivaloyl-β-d-xylopyranose (1). The β-anomeric major products 3-chloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (6β), 3,5-dichloro-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (7β), and 3,5-dibromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (8β) were used as starting materials for transition metal catalyzed C-C-coupling reactions. Arylations of the triazole ring of 7β, and 8β were successful in 5-position with phenylboronic acid, 4-vinylphenylboronic acid, and 4-methoxyphenylboronic acid, respectively, under Suzuki cross-coupling conditions (products 11-17). Moreover, a Cu-catalyzed perfluoroalkylation of 8β is reported with 1-iodo-perfluorohexane yielding 3-perfluorohexyl-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazole (18). Compound 18 was depivaloylated to the trihydroxy derivative 19. The copper-mediated reaction of 8β with Rupert's reagent gave the bis(3-bromo-1-(2,3,4-tri-O-pivaloyl-β-d-xylopyranosyl)-1,2,4-triazol-5-yl) (20).     

Formation of new 4-isocyanobut-2-enenitriles by thermal ring cleavage of 3-pyridyl azides

A new thermal ring cleavage of 3-pyridyl nitrenes for the formation of 4-isocyanobut-2-enenitrile products is reported. Thermolysis of 4-(thien-3-yl)-3-pyridyl azide 1 and 3-azido-4-(1-TIPS-1H-pyrrol-3-yl)pyridine 5 afforded two new isonitrile-nitrile products by ring cleavage; 4-isocyano-2-(thiophen-3-yl)but-2-enenitrile (3, 27%) and 4-isocyano-2-(1-TIPS-1H-pyrrol-3-yl)but-2-enenitrile (7, 20%), in addition to our previously reported pyrido[3,4-b]thienopyrrole (2, 29%) and pyrido[3,4-b]pyrrolo[3,2-d]pyrrole (6, 71%) products. Minor amounts of 2-(thien-3-yl)-1H-pyrrole-3-carbonitrile (4, 6%), formed by ring contraction, were also isolated after thermolysis of azide 1. Isonitriles 3 and 7 underwent degradation into amine 3b and formamide 7a by acidic hydrolysis. The nature and chemistry of compounds 3, 4 and 7 were investigated.     

Seven membered ring chelates derived from γ-hydroxyamides and triphenyltin or diphenylboron

N-Benzyl-4-hydroxy-butyramide (1), 4-hydroxy-N-[(R)-1-phenyl-ethyl]-butyramide (2), and (R)-4-hydroxy-2-methyl-N-[(R)-1-phenyl-ethyl]-butyramide (3a) were used to prepare new diphenylboron and triphenyltinoxy compounds: diphenylborinic acid 3-benzylcarbamoyl-propyl ester (4), diphenylborinic acid 3-[(R)-1-phenyl-ethylcarbamoyl]-propyl ester (5) and diphenylborinic acid (R)-3-[(R)-1-phenyl-ethylcarbamoyl]-butyl ester (6), N-benzyl-4-triphenyltinoxy-butyramide (7), 4-triphenyltinoxy-N-[(R)-1-phenyl-ethyl]-butyramide (8), and (R)-4-triphenyltinoxy-2-methyl-N-[(R)-1-phenyl-ethyl]-butyramide (9). The X-ray diffraction analysis of a crystalline structure of the new γ-hydroxyamide 3a is reported, as well as that of the first example of a crystalline structure where a diphenylborinic ester forms a seven membered chelate, by a carbonyl coordination to boron (4). Structural studies of tin and boron esters were performed by NMR. The CO internal coordination to tin atoms, affording seven membered rings, was observed by ¹¹⁹Sn NMR experiments at low temperature.     

Highly efficient, multigram and enantiopure synthesis of (S)-2-(2,4′-bithiazol-2-yl)pyrrolidine

(S)-2-(4-Bromo-2,4′-bithiazole)-1-(tert-butoxycarbonyl)pyrrolidine ((S)-1) was obtained as a single enantiomer and in high yield by means of a two-step modified Hantzsch thiazole synthesis reaction when bromoketone 3 and thioamide (S)-4 were used. Further conversion of (S)-1 into trimethyltin derivative (S)-2 broadens the scope for further cross-coupling reactions.     

Reversible pyranyl complex formation and the mechanism of rearrangement to (η-6-oxocycloheptadienyl)Mn(CO)3 complexes in the reaction of β-cyclomanganated 1,5-diarylpenta-1,4-dien-3-ones and alkynes; the crystal structure of [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η]tricarbonylmanganese

[1-Phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1a) reacts with PhCCH in CCl₄ at room temperature to form [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η⁵]tricarbonylmanganese (2a), whose X-ray crystal structure is reported to complement that of its isomer [6-oxo-2,4,7-triphenylcyclohepta-1,4-dienyl-1,2,3,4,5-η]tricarbonylmanganese (3a), previously obtained from the reaction under reflux; but for 1a and PhCCPh the pyranyl complex cannot be isolated before rearrangement to the 3a analogue occurs. More forcing reaction conditions for 1a with Me₃SiCCH and for [1-(2-trifluoromethylphenyl)-2-[(E)-3-(2-trifluoromethylphenyl)prop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1b) with Me₃SiCCH and PhCCH give new analogues of 3a where previously only 2a analogues had been isolated.The reaction in CCl₄ under reflux of PhCCH and the β-deuterio analogue of 1a, [1-phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-3d-κO]ethenyl-κC¹]tetracarbonylmanganese, gave deuteriated 3a with exo-D at the α-carbon, C7. This is inconsistent with the Mn-mediated Ph migration mechanism originally proposed to accommodate the endo position of Ph in 3a, and instead it implicates a cyclopropyl carbonyl-addition intermediate or a cyclopropyl acyl-substitution transition state in the key rearrangement step for 2a → 3a.     

Stereochemical studies—XIII: Cyclic aminoalcohols and related compounds—VI synthesis of the four 2-amino-4-t-butylcyclopentanol isomers

From diethyl 3-t-butyladipate (5), via cis- and trans-4-t-butylcyclopentene-1,2-oxide (31, 32) as key compounds, the syntheses of cis-2-amino-cis-4-t-butylcyclopentanol (1), cis-2-amino-trans-4-t-butylcyclopentanol (2), trans-2-amino-cis-4-t-butylcyclopentanol (3) and trans-2-amino-trans-4-t-butylcyclopentanol (4) have been achieved. 1, 3 and 4 were also synthesized from the corresponding 2-hydroxy-4-t-butylcarboxylic acids by Curtius degradation of the hydrazides (11, 18, 19). The steric course of process leading to the above compounds is discussed.     

Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines

Two new types of pyrido-fused tris-heterocycles (1a,b and 2a,b) have been prepared from 3-aminopyridine in five/six steps. A synthetic strategy for the preparation of the novel pyrido[3,4-b]thieno[2,3- and 3,2-d]pyrroles (1a,b) and pyrido[4,3-e]thieno[2,3- and 3,2-c]pyridazines (2a,b) has been studied. The Suzuki cross coupling of the appropriate 2- and 3-thienoboronic acids (3,4) and 4-bromo-3-pyridylpivaloylamide (9) afforded the biaryl coupling products (10,11) in high yields (85%). Diazotization of the hydrolysed (2-thienyl)-coupling product (12) and azide substitution gave the 3-azido-4-(2-thienyl)pyridine intermediate (72%, 14). 3-Azido-4-(3-thienyl)pyridine (15) was prepared by exchanging the previous order of reactions. The desired β-carboline thiophene analogues (1a,b) were obtained via the nitrene by thermal decomposition of the azido precursors (14,15). By optimising conditions for intramolecular diazocoupling, the corresponding pyridazine products (72-83%, 2a,b) were afforded.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Synthesis of a new class of azathia crown macrocycles containing two 1,2,4-triazole or two 1,3,4-thiadiazole rings as subunits

A series of new 1,2/1,3-bis[o-(N-methylidenamino-5-aryl-3-thiol-4H-1,2,4-triazole-4-yl)phenoxy]alkane derivatives 3a-d and bis[o-(N-methylidenamino-2-thiol-1,3,4-thiadiazole-5-yl)phenoxy]alkanes 6a-c were prepared by condensation of 4-amino-5-(aroyl)-4H-1,2,4-triazole-3-thiols 2a-b or 2-amino-5-mercapto-1,3,4-thiadiazole with bis-aldehydes 1a-c. Further reaction of compounds 3a-d and 6a-c with dibromoalkanes afforded the new macrocycles 5a-f and 8a-d. The cyclization does not require high dilution techniques and provides the expected azathia macrocycles in good yields, ranging from 55% to 68%.     

Design and synthesis of boron containing 2,4-disubstituted-phthalazin-1(2H)-one and 3,7-disubstituted-2H-benzo[b][1,4] oxazine derivatives as potential HGF-mimetic agents

We synthesized boron containing 2-(4-methoxybenzyl)-4-(4-(4,4,5,5-tetramethyl-1,3,2-dioaborolan-2-yl)phenyl) phthalazin-1(2H)-one 3 and 7-methyl-3-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)-2H-benzo[b][1,4] oxazine 8. The reaction of compound 2 with B₂pin₂ using potassium acetate as the base and Pd(PPh₃)₂Cl₂ as the catalyst, produced the corresponding boron-containing derivative 3 as a white solid in 65% yield. Alternatively, we have synthesized compound 8 as a yellow solid in 59% yield using the Miyaura borylation reaction. The potassium trifluoro(4-(-methyl-2H-benzo[b][1,4]oxazine-3-yl)phenylborate 9 was then obtained after treatment of 8 with aqueous solution of KF₂H in methanol as white solid product in 60% yield. The biological activities of the synthetic compounds are currently being evaluated.