Solvent effect on thermal degradation of plasticized para-substituted polystyrenes

The thermal effect on stability of a series of para-substituted polystyrenes with methyl, methoxy and α-methyl substituents in various solvents was studied in the temperature range of 298-363 K. They gave a monomer fluorescence as a minor part and excimer fluorescence as a major part. Thermal heating of para-substituted polystyrenes shows a decrease in both monomer and excimer fluorescences in all used solvents. Thermal heating causes a small fluorescence quenching effect at lower temperatures in solution but becomes very dominant at higher temperatures. Added terephthalate and phthalate plasticizers to these para-substituted polystyrenes caused a quenching of both monomer and excimer fluorescences without the formation of exciplex emission. The thermal quenching processes of the plasticized polymers were accompanied by a change in the structure of the fluorescence spectra at high heating temperatures. This may indicate that thermodestruction of these polymers starts from a random chain scission. The change in solvent polarity has considerable effect on fluorescence quenching but it has a minor effect on the thermal degradation of these polymers. The binding energies for excimer formation were calculated in the used solvents.     

Larvicidal and structural studies of some triphenyl- and tricyclohexyltin para-substituted benzoates

Several new triphenyl- and tricyclohexyltin para-substituted benzoates were synthesized. Their structures were characterized by IR and Mössbauer spectroscopies. The structures were determined to be four-coordinated monomers. Larvicidal activities of the new compounds as well as other benzoates were evaluated against the 2nd larval instar of the Anopheles stephensi and Aedes aegypti mosquitoes. Results from the screening studies indicated that the triphenyltin benzoates were more toxic towards the Ae. aegypti larvae. A quantitative-structure activity relationship was also developed for the An. stephensi larvae.     

Shape-selective para-chlorination of phenol using sulfuryl chloride with the aid of microporous catalysts

Aluminum-pillared montmorillonite clay, and partially cation-exchanged L type zeolites, efficiently catalyze the selective para-chlorination of phenol using SO₂Cl₂ in 2,2,4-trimethylpentane at 25 °C. A conversion of ∼96%, a para-selectivity of ∼89%, and a para/ortho ratio of 8.0, were achieved with H⁺, Al³⁺, Na⁺, and K⁺-L zeolite. This heterogeneous zeolite-catalyzed process is the first example, which shows a pronounced shape-selectivity in the chlorination of phenol.     

4-Cyanomethyl-ortho-quinone tautomerism and the structure of the dienophile in Gates' morphine synthesis

Oxidation of (3,4-dihydroxyphenyl)acetonitrile gives (3-hydroxy-4-oxo-cyclohexa-2,5-dienylidene)acetonitrile via the isomeric ortho-quinone ((3,4-dioxo-cyclohexa-2,5-dienylidene)acetonitrile). This para-quinomethane product is formed as a mixture of diastereoisomers and with an initial composition of Z/E 4:1. Over 24 h this mixture equilibrates to a composition of Z/E 5:4. The para-quinomethane reacts with morpholine to give (3,4-dihydroxyphenyl)-morpholin-4-yl-acetonitrile. Similar oxidation of (3,4-dihydroxynaphthalen-1-yl)acetonitrile also gives a para-quinomethane derivative and not the 1,2-naphthoquinone as previously described. The reactivity of this para-quinomethane derivative as a 1,3-dienophile in a key step of the Gates' morphine synthesis is attributed to formation of its conjugate acid.     

Reaction of (diacetoxyiodo)benzene with excess of trifluoromethanesulfonic acid. A convenient route to para-phenylene type hypervalent iodine oligomers

Reaction of (diacetoxyiodo)benzene [PhI(OAc)₂] in trifluoromethanesulfonic acid (TfOH) resulted in oligomerization of PhI(OAc)₂. Quenching with NaBr gave the bromide salts of hypervalent iodine oligomers that were determined by thermolysis with KI to be a para phenylene type of oligomers. Neutralization of the reaction mixture of PhI(OAc)₂ and TfOH with aqueous NaHCO₃ yielded the triflate salts of iodine oligomers. Furthermore, quenching the reaction mixture with aromatic substrates afforded arylated iodine oligomers. These iodine oligomers were found to be 3-4 of the number average degree of polymerization (P_n) by GC analysis of the thermolysis products and ¹H NMR analysis. The major products, trimer and tetramer, were synthesized independently.     

Flow injection chemiluminescent immunoassay with para-phenylphenol and sodium tetraphenylborate as synergistic enhancers

A new approach of flow injection chemiluminescent immunoassay (FICLIA) with synergistic enhancement was developed. The synergistic action was significant in the chemiluminescence (CL) system of luminol-H₂O₂-HRP with two enhancers, para-phenylphenol (PPP) and sodium tetraphenylborate (NaTPB). The relative CL intensity was 128.84% stronger (compared to NaTPB alone) and 122.66% stronger (compared to PPP alone) using both enhancers than any one alone (both P<0.001). While the present approach was applied to the determination of rabbit IgG as a model analyte, satisfactory results were obtained in the dynamic range of 2-60 μg l⁻¹ with a detection limit of 0.68 fmol per injection and a precision of 4.7-9.3%, and the recoveries were 92.5-99.4%. The results of rabbit IgG determination accorded with those of radio immunoassay (RIA). The lifetime of the immuno-column was considerably long: one column was applied to more than 200 determinations in 1 month without significant loss of activity.     

Synthesis of N,N′-bis and N,N,N′,N′-tetra-[(3,5-di-substituted-1-pyrazolyl)methyl]para-phenylenediamines: new candidate ligands for metal complex wires

A series of tridentate ligands N,N-bis-[(di-substituted-1-pyrazolyl)methyl]arylamines 2-3a,b and benzylamine 4a,b, tetradentate N,N′-bis-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 7a,b and hexadentate N,N,N′,N′-tetra-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 8a,b has been prepared in good yield by condensation of arylamines, benzylamine or para-phenylenediamine with N-hydroxymethyl disubstituted pyrazoles 1a,b. The synthesis and characterisation of these various polydentate ligands are described.     

Highly stereoselective synthesis of para-substituted (E)-N-styrylcarbazoles via sequential silylative coupling-Hiyama coupling reaction

A series of new para-substituted (E)-(N)-styrylcarbazoles, i.e., eight (E)-9-[2-(aryl)ethenyl]-9H-carbazoles (5-12) and 1,4-bis[(E)-2-(9H-carbazol-9-yl)vinyl]benzene (13), have been synthesized in high yield and stereoselectively by a sequential silylative coupling-Hiyama coupling reaction, i.e., coupling of commercially available 9-vinylcarbazole with vinyltriethoxysilane or divinyltetramethyldisiloxane in the presence of [RuHCl(CO)(PCy₃)₂] (I), followed by Pd (II) catalyzed cross-coupling with para-substituted iodobenzenes.The tandem procedure has facilitated the synthesis of 13. X-ray structures of the intermediate silylvinylcarbazole (4), as well as products 12 and 13 have been obtained.     

Highly selective acetoxylation of sulfonamides via using phenyliodine(III) diacetate

A highly efficient acetoxylation reaction of N-aryl-arylsulfonamides has been developed, presumably proceeding via the selective functionalization of N-aryl C–H bonds. A stoichiometric amount of PhI(OAc)₂ was generally employed as the oxidation reagent, and various para-acetoxylated sulfonamide derivatives had been generated in excellent yields. This chemistry endowed an economic synthesis of valuable acetoxylated sulfonamides through direct C–O bond formation processes.     

The Diels–Alder reactions of para-benzoquinone nitrogen-derivatives: an experimental and theoretical study

An experimental and theoretical study of the comparative reactivity and selectivity of the Diels–Alder reactions of para-benzoquinones and three nitrogen derivatives have been performed. The mono-oximes derivatives do not react under the tested reaction conditions, whereas the tosylated mono-oximes react slowly. However, the mono N-tosyl imines show excellent reactivity, and superior to the parent para-benzoquinones. DFT calculations support these experimental results.     

Appending aromatic moieties at the para- and meta-position of calixarene phenol rings via p-bromodienone route

The silver-mediated nucleophilic substitution on calixarene p-bromodienone derivatives (the ‘p-bromodienone route’) with activated aromatic substrates allows the introduction of aromatic moieties at the para- or meta-position of calixarene aromatic rings. Less reactive substrates mainly afford C-O para-coupled derivatives, while more activated ones mainly give inherently chiral, C-C meta-coupled products through a dienone-phenol rearrangement of the intermediate dienone derivative. Examples of C-C para-coupling and O-C coupling at the endo calixarene oxygen atom were also observed.     

The para-siletanylbenzyl (PSB) ether: a peroxide-cleavable protecting group for alcohols and phenols

A novel arylmethyl protecting group that is electronically similar to benzyl (Bn) but that can be cleaved under mild oxidizing conditions in the presence of para-methoxybenzyl (PMB) is described herein. para-Siletanylbenzyl (PSB) ethers are formed in one or two steps from the corresponding alcohols and cleaved in one or two steps with basic peroxide. Alcohols and phenols have been protected in good yields and deprotected cleanly under mild oxidative conditions.     

Nucleophilic addition of regioselectively lithiated indoline with aldimines for the syntheses of 2- and 7-indolinyl methanamine derivatives

Indolines bearing different N-protecting groups (N-Tbf and N-Boc) were deprotonated regioselectively at C-2 (sp³ hybridized ortho-H) and C-7 (sp² hybridized para-H) of the indoline ring, respectively. The generated organolithium intermediates reacted with aldimines to give the desired products in good yields with excellent anti-diastereoselectivities (>99:1). The produced N-Ts-(1-Tbf-indolin-2-yl)methanamine was facilely transformed to a fused heterocyclic compound.     

Synthesis of meta- and paracyclophanes containing unsaturated amino acid residues

[7.7], [8.8], [9.9] and [13.13] Paracyclophanes and [9.9] and [13.13] metacyclophanes containing two unsaturated amino acid residues have been synthesised. An X-ray crystallographic study of three of the paracyclophanes and molecular modelling of two paracyclophanes and two metacyclophanes revealed two main structural types. The ‘staggered’ structure appears to be favoured by longer hydrocarbon chains, whilst the ‘barrel’ structure appears to be more accessible to compounds containing shorter hydrocarbon chains. The [9.9] paracyclophane has been hydrogenated and deprotected to give a saturated amino acid, and an alternative approach to key aldehydes is reported.     

Synthesis of para-substituted styrenes

Using double Stille cross-coupling reaction bromo (or chloro)benzylbromide is easily transformed into substituted styrene monomers bearing a wide range of substituents in para position     

Facile p-toluenesulfonic acid-promoted para-selective monobromination and chlorination of phenol and analogues

para-Regioselective bromination of phenol and analogues, promoted by p-toluenesulfonic acid, is achieved in high to excellent yields at room temperature with N-bromosuccinimide. Chlorination with N-chlorosuccinimide and catalysed by p-toluenesulfonic acid also gives para-chlorinated phenol analogues in good yields at room temperature.     

Iodine(III)-mediated aromatic amidation vs olefin amidohydroxylation. The amide N-substituent makes the difference

A series of N-methoxy- and N-para-methoxyphenylacetamides simultaneously substituted at the α position by a benzyl and an allyl group have been treated with phenyliodine(III)bis(trifluoroacetate) to generate stabilized N-acylnitrenium intermediates. It has been observed that, when starting from N-methoxy substituted amides, such intermediates are intramolecularly trapped by nucleophilic arene rings to render the quinolinone skeleton. Alternatively, under the same reaction conditions, N-para-methoxyphenylamides afford pyrrolidinone derivatives through an olefin amidohydroxylation process.     

Novel synthesis of alkoxy substituted oxa[9]helicenes by the reaction of helical quinone with alcohols

The reaction of helical quinone with alcohols in the presence of Brønsted acid such as para-toluenesulfonic acid (pTSA) or HCl proceeded smoothly to produce the corresponding alkoxy substituted oxa[9]helicenes in good yields.     

Synthesis of a para-quinone macrolactam related to geldanamycin by ring closing metathesis

Model studies conducted with the α,β,γ,δ-unsaturated 3-alkenyl-2,4,5-trimethoxyanilides 11 revealed that a ring closing metathesis (RCM) of these compounds is possible if the ansa chain contains more than 14 atoms. The (Z)-configurated products 12c-e were obtained in good yields (77-87%) and with perfect simple diastereoselectivity. Since the oxidation of the 2,4,5-trimethoxyanilides led predominantly to undesired ortho-quinones such as 15 or to para-azaquinones such as 16 the macrocyclic 2,5-di-iso-propoxy-4-methoxyanilide 22 was prepared. The iso-propyl protecting groups could be selectively cleaved and the intermediate para-hydroquinone oxidized on air to the desired para-quinone 2 (86% yield). The compound shows some key features (macrolactam ring with the same ring size, α,β,γ,δ-unsaturated anilide, para-quinone) of geldanamycin.     

Self-assembly of para-OH functionalized ECE-metalated pincer complexes

Various para-OH functionalized ECE-pincer metal complexes [MX(ECE-OH)L_n] (ECE-OH = [C₆H₂(CH₂E)₂-2,6-OH-4]⁻, E = NMe₂, PPh₂ and SPh) were synthesized. The X-ray crystal structures of neutral [PdCl(SCS-OH)], [PdCl(NCN-OH)], and cationic [Pd(PCP-OH)(MeCN)](BF₄) are reported. The neutral halide complexes exhibit self-assembly to form polymeric chains via H-bonding involving the para-OH group as donors and the halide ligand on the metal as acceptors. Moreover, the halide ligand can be replaced by a monomeric aryloxy-O ligand leading to the formation of a covalently bonded dimer. The crystal structure of such a dimer derived from [PdI(NCN-OH)] is reported. Furthermore, these pincer-metal complexes were tethered through a carbamate linker to a siloxane functionality with the aim to be immobilized on a silica support. The crystal structure of a siloxane-functionalized [PtI(NCN-Z)] complex exemplifies how other H-bonding interactions not involving the metal-halide groupings can lead to polymeric networks as well.