Fluorescent sensor of fluorene derivatives having phosphonic acid as a fluorogenic ionophore: synthesis and static quenched properties for Fe(III)

A series of novel fluorene derivatives containing –PO(OH)₂ (1, 2), –HS (3), and –N⁺ (CH₃)₃ (4) were synthesized and only phosphonic-functionalized fluorene derivatives can detect Fe³⁺ with high selectivity over other metal ions. The fluorescence quenching of 1 and 2 with titration Fe³⁺ in water–DMF solution fits the Perrin model of static quenching. Spectral analysis showed that Fe³⁺ bound with fluorene-based chemosensor through the O-atoms at the phosphonic group to form nonfluorescent complexes. The binding ratio was estimated by the Job plot and the trace levels of iron in samples were successfully monitored.     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

Synthesis,structure and physical properties of trinuclear M3tdt3(PEt3)3 (M = Fe,Co) clusters containing metal–metal bonds

Trinuclear M₃tdt₃(PEt₃)₃ (M = Fe^II for I, Co^II for II) clusters have been synthesized from the reaction between M(PEt₃)₂Cl₂ and Na₂tdt (tdt = toluene-3,4-dithiolate) in MeCN. Both complexes have been characterized by elemental analyses, FT-IR, UV–Vis, FAB-MS, ¹H NMR and cyclic voltammetry. Structures of Fe₃tdt₃(PEt₃)₃ (I) and Co₃tdt₃(PEt₃)₃ (II) were determined by single crystal X-ray crystallography. The Fe₃ triangular core of the 48-electron complex I, with an isosceles triangular geometry, showed very short Fe–Fe distances of 2.4014(13) and 2.4750(12) Å, which are comparable to the extensive M–M frameworks found in the FeMo-cofactor in nitrogenase. The isostructural Co₃tdt₃(PEt₃)₃ (II), with an analogous Co₃ coordination geometry, showed short Co–Co distances of 2.4442(9) and 2.5551(10) Å. The slightly longer M–M distances in complex II were explained by a total valence electron counting argument. Cyclic voltammetry of Fe₃tdt₃(PEt₃)₃ (I) showed robust reduction waves compared to Co₃tdt₃(PEt₃)₃ (II). Temperature-dependent effective magnetic moment measurements of I and II showed both clusters behave similarly and the magnetic property of the M₃ equilateral triangle core with extensive metal–metal interactions was characterized as degenerate frustration.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Synthesis,crystal structure and spectroscopic characterization of new neutral and cationic (η-p-cymene)–ruthenium(II) complexes with phosphine–amide ligands

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with the phosphino-amides o-Ph₂P–C₆H₄CO–NH–R [R = ⁱPr (a), Ph (b), 4-MeC₆H₄ (c), 4-FC₆H₄ (d)] to give the mononuclear compounds 1a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)]Cl. The subsequent reaction of these complexes with KPF₆ produced the cationic species 2a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)][PF₆] in which phosphino-amides also act as rigid P,O-chelating ligands. The molecular structures of 2b–d were determined crystallographically. Amide deprotonation is achieved when complexes 2a–d were made react with 1 M aqueous solution of KOH, affording the corresponding neutral species 3a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–N–R)] in which a P,N-coordination mode is suggested.     

Dimethylthallium(III) complexes with picolinic acid and its hydroxyl derivatives

The reaction of dimethylthallium(III) hydroxide with picolinic acid (Hpic), 3-hydroxypicolinic acid (H₂3hpic) and 6-hydroxypicolinic acid (H₂6hpic) in an aqueous/methanol mixture afforded the complexes [TlMe₂(pic)] (1), [TlMe₂(H3hpic)] (2) and [TlMe₂(H6hpic)] (3), respectively. Complex 3′, [NaTlMe₂(6hpic)₂]_n, was obtained as a minor product from a methanolic solution of 3. Compounds 1–3 were characterized by IR and Raman spectroscopy and, in the cases of 1, 2 and 3′, by single-crystal X-ray diffraction. Complex 3′ is the first example of an H6hpic⁻ heterobimetallic compound to be isolated. The ¹H and ¹³C NMR spectra of 1 and 2 are also discussed.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.     

Synthesis,structural characterization and reactivity of copper(I)-nitrile complexes: Crystal and molecular structure of [Cu(BzCN)4][BF4]

Complexes of general formula [CuL₄][BF₄] (L = benzonitrile – PhCN 2 or phenylacetonitrile – BzCN 3) have been prepared and structurally characterized by NMR spectroscopy and X-ray crystallography. Their structure and reactivity have been compared to the well known [Cu(MeCN)₄][BF₄] (1). The ⁶³Cu line width and the ⁶³Cu chemical shift have been evaluated by varying the temperature and the concentration of the complex 2 in benzonitrile solutions. The phenylacetonitrile solutions of the complex 3 give extremely broad signals which are beyond detection. Accordingly, compound 3 has been studied by ⁶³Cu MAS NMR spectroscopy. The solution NMR data are consistent to the prevalence of dynamic equilibrium between tetra- and low-coordinated species in both complexes. The X-ray structure of 3 revealed that the copper(I) atom sits in a slightly distorted tetrahedral geometry, surrounded by four BzCN ligands.     

Ratiometric fluorescence probe for two-photon bioimaging of Cr in living cells

We presented a ratiometric fluorescent probe dansylamide–rhodamine dyad (DANS–RB) for selectively detecting Cr³⁺ in semi-aqueous solution. The detection mechanism relies on the fluorescent resonance energy transfer (FRET) process from the dansylamide (energy donor) to the rhodamine (energy acceptor) after the addition of Cr³⁺. The cell-permeability of DANS–RB was confirmed by the two-photon fluorescence microscopy experiments, which demonstrated DANS–RB was a good candidate for monitoring the intracellular Cr³⁺ level with the ratiometric fluorescent method. Combining the excellent selectivity, the ratiometric quantitative detection, and the cell-permeability, DANS–RB may find a broad application in the investigation on biologically relevant species in living cells.     

Selective turn-on fluorescence for Zn and Zn + Cd metal ions by single Schiff base chemosensor

Chemosensor based on Schiff base molecules (1, 2) were synthesized and demonstrated the selective fluoro/colorimetric sensing of multiple metal ions (Mn²⁺, Zn²⁺ and Cd²⁺) in acetonitrile–aqueous solution. Both 1 and 2 showed a highly selective naked-eye detectable colorimetric change for Mn²⁺ ions at 10⁻⁷ M. Fluorescence sensing studies of 1 and 2 exhibited a strong fluorescence enhancement (36 fold) selectively upon addition of Zn²⁺ (10⁻⁷ M, λ_max = 488 nm). Fluorescence titration and single crystal X-ray analysis confirmed the formation of 1:1 molecular coordination complex between 1 and Zn²⁺. Interestingly, a rare phenomenon of strong second turn-on fluorescence (190 fold, λ_max = 466 nm) was observed by the addition of Cd²⁺ (10⁻⁷ M) into 1 + Zn²⁺ or Zn²⁺ (10⁻⁷ M) into 1 + Cd²⁺. Importantly both 1 and 2 exhibited different fluorescence λ_max with clearly distinguishable color for both Zn²⁺ and Cd²⁺.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

A novel dinuclear double-stranded helical complexes of bis(terdentate) N4O2 donor ligand with silver(I) and zinc(II) d metal ions

Reaction of the hexadentate N₄O₂-donor ligand 6,6′-bis(3-hydrazonobutan-2-one)-2,2′-bipyridine (L) with Ag^(I) and Zn^(II) affords a dinuclear double stranded helicate species [Ag₂L₂]²⁺ (1a) and [Zn₂L₂]²⁺ (1b), in which partitioning of the ligand into two bis-tridentate pyridyl-ketoimine chelating units allow each ligand to bridge both metal centres. X-ray crystallography, ESI-MS and UV–Vis spectrophotometric titration experiments reveal that the complex (1a) retains its solid-state structure in solution. The crystal structure of (1a) provides the first example of dinuclear silver(I) complex in which both of the metal centres can be approximated as a seven coordinate distorted mono-capped trigonal prism in which the Ag?Ag close contact of 3.034(4) Å is taken into account and forms the cap. The counter-ions do not interact with metal centres but hydrogen bond to N–H protons of the hydrazonic arms from the separate strands. The adjacent helical units are cross-linked together via NH?O_keto hydrogen bonding to maintain the supramolecular structure.     

Quantum chemistry studies on the Ru-M interactions and the P NMR in [Ru(CO)3(Ph2Ppy)2(MCl2)] (M = Zn, Cd, Hg)

To study the Ru-M interactions and their effects on ³¹P NMR, complexes [Ru(CO)₃(Ph₂Ppy)₂] (py = pyridine) (1) and [Ru(CO)₃(Ph₂Ppy)₂MCl₂] (M = Zn, 2; Cd, 3; Hg, 4) were calculated by density functional theory (DFT) PBE0 method. Moreover, the PBE0-GIAO method was employed to calculate the ³¹P chemical shifts in complexes. The calculated ³¹P chemical shifts in 1-3 follow 2 > 3 > 1 which are consistent to experimental results, proving that PBE0-GIAO method adopted in this study is reasonable. This method is employed to predict the ³¹P chemical shift in designed complex 4. Compared with 1, the ³¹P chemical shifts in 2-4 vary resulting from adjacent Ru-M interactions. The Ru → M or Ru ← M charge-transfer interactions in 2-4 are revealed by second-order perturbation theory. The strength order of Ru → M interactions is the same as that of the P-Ru → M delocalization with Zn > Cd > Hg, which coincides with the order of ³¹P NMR chemical shifts. The interaction of Ru → M, corresponding to the delocalization from 4d orbital of Ru to s valence orbital of M²⁺, results in the delocalization of P-Ru → M, which decreases the electron density of P nucleus and causes the downfield ³¹P chemical shifts. Except 2, the back-donation effect of Ru ← M, arising from the delocalization from s valence orbital of M²⁺ to the valence orbital of Ru, is against the P-Ru → M delocalization and results in the upfield ³¹P chemical shifts in 4. Meanwhile, the binding energies indicate that complex 4 is stable and can be synthesized experimentally. However, as complex [Ru(CO)₃(Ph₂Ppy)₂HgCl]⁺5 is more stable than 4, the reaction of 1 with HgCl₂ only gave 5 experimentally.     

Naked eye sensing of anions using thiourea based chemosensors with real time application

Novel chromogenic sensors with thiourea moiety as receptor unit were synthesized and characterized using IR and NMR spectroscopic techniques. The receptors 1 and 2 bearing hydrogen bonding site demonstrate visually striking color change, UV–vis, and fluorescence responses for F⁻, AcO⁻, and OH⁻ over other anions such as Cl⁻, Br⁻, H₂PO₄⁻ and HSO₄⁻. Both the receptors 1 and 2 demonstrate detection limit at micro molar level. Further insight to the nature of interaction between receptors and anions was studied using ¹H NMR titration experiment. In particular, the fluoride of tooth paste and mouthwash in water phase can be detected by receptor 2.     

Spectroscopic,structure and DFT studies of copper(II) and palladium(II) complexes of pyridine-2-carboxaldehyde-2-pyridylhydrazone: A chromogenic agent for palladium(II)

A heterocyclic hydrazone ligand, pyridine-2-carboxaldehyde-2-pyridylhydrazone, HL, 1, was investigated as a new chromogenic agent for selective detection of Pd²⁺. The ligand HL, 1, undergoes 1:1 complexation with Pd²⁺ and Cu²⁺ to form complexes [Pd(L)Cl], 1a and [Cu(HL)Cl₂], 1b respectively. The complex 1a gives a characteristic absorption peak at 536 nm with distinct reddish-pink coloration. The change in color can easily be distinguished from other metal complexes by the naked eye. No obvious interference was observed in the presence of other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Pb²⁺). The association constants, K_ass (UV–Vis), were found to be 5.52 ± 0.004 × 10⁴ for 1a and 4.94 ± 0.006 × 10⁴ for 1b at 298 K. On excitation at 295 nm, the ligand HL, 1 strongly emits at 372 nm due to an intraligand ¹(π–π^∗) transition. Upon complexation the emission peaks are blue shifted (λ_ex 295 nm, λ_em 358 nm for 1a and λ_ex 295 nm, λ_em 367 nm for 1b) along with a quenching (F/F₀ 0.32 for 1a and 0.88 for 1b) in the emission intensity. DFT and TDDFT calculations were highly consistent with the spectroscopic behavior of the ligand and complexes. The molecular structure of the complex 1b has been determined by single crystal X-ray diffraction studies.     

Synthesis and crystal structure characterization of iron(II), cobalt(II) and nickel(II) complexes with 1,3-bis(2-pyridylmethylthio)propane

Three new mononuclear complexes of nitrogen–sulfur donor sets, formulated as [Fe^II(L)Cl₂] (1), [Co^II(L)Cl₂] (2) and [Ni^II(L)Cl₂] (3) where L = 1,3-bis(2-pyridylmethylthio)propane, were synthesized and isolated in their pure form. All the complexes were characterized by physicochemical and spectroscopic methods. The solid state structures of complexes 1 and 3 have been established by single crystal X-ray crystallography. The structural analysis evidences isomorphous crystals with the metal ion in a distorted octahedral geometry that comprises NSSN ligand donors with trans located pyridine rings and chlorides in cis positions. In dimethylformamide solution, the complexes were found to exhibit Fe^II/Fe^III, Co^II/Co^III and Ni^II/Ni^III quasi-reversible redox couples in cyclic voltammograms with E_1/2 values (versus Ag/AgCl at 298 K) of +0.295, +0.795 and +0.745 V for 1, 2 and 3, respectively.     

Highly selective detection of Hg ion by push–pull-type purine nucleoside-based fluorescent sensor

Highly selective detection of Hg²⁺ ion has been achieved using the push–pull-type purine nucleoside-based fluorescent sensor L1. The sensor L1 incorporating aza-18-crown-6 at C6 position of purine nucleoside, is highly sensitive and selective toward Hg²⁺ ion in CH₃CN–H₂O mixture (92/8, v/v). The detection limit for the fluorescent sensor L1 toward Hg²⁺ ion is 7.8 × 10⁻⁸.     

New 3d–4f supramolecular systems constructed by [Fe(bipy)(CN)4] and partially blocked lanthanide cations

The reaction of acetonitrile (1–5) and mixed acetonitrile/water 1:1 (6–9) solutions containing the cyanide-bearing [Fe(bipy)(CN)₄]⁻ building block (bipy = 2,2′-bipyridine) and the partially blocked [Ln(bpym)]³⁺ cation (Ln = lanthanide trivalent cation and bpym = 2,2′-bipyrimidine) has afforded two new families of 3d–4f supramolecular assemblies of formula [Ln(bpym)(NO₃)₂(H₂O)₃][Fe(bipy)(CN)₄] · H₂O · CH₃CN [Ln = Sm (1), Gd (2), Tb (3), Dy (4) and Ho (5)] and [Ln(bpym)(NO₃)₂(H₂O)₄][Fe(bipy)(CN)₄] [Ln = Pr (6), Nd (7), Sm (8), Gd (9)]. They crystallize in the P2₁/c (1–5) and P2/c (6–9) space groups and their structures are made up of [Fe(bipy)(CN)₄]⁻ anions (1–9) and [Ln(bpym)(NO₃)₂(H₂O)_n]⁺ cations [n = 3 (1–5) and 4 (6–9)] with uncoordinated water and acetonitrile molecules (1–5) which are interlinked through an extensive network of hydrogen bonds and π–π stacking into three-dimensional motifs. Both families have in common the occurrence of the low-spin iron(III) unit [Fe(bipy)(CN)₄]⁻ where two bipy–nitrogen and four cyanide–carbon atoms build a somewhat distorted octahedral surrounding around the iron atom [Fe–N = 1.980(3)–1.988(3) Å (1–5) and 1.988(2)–1.992(2) Å (6–9); Fe–C = 1.904(5)–1.952(4) Å (1–5) and 1.911(2)–1.948(3) Å (6–9)]. The main structural difference between both families concerns the environment of the lanthanide atom which is nine- (1–5)/10-coordinated (6–9) with a chelating bpym, two bidentate nitrate and three (1–5)/four (6–9) water molecules building distorted monocapped (1–5)/bicapped (6–9) square antiprisms. This different lanthanide environment is at the origin of the different hydrogen bonding pattern of the two families of compounds.     

Synthesis and photophysical properties of water-soluble sulfonato-Salen-type Schiff bases and their applications of fluorescence sensors for Cu in water and living cells

A series of water-soluble sulfonato-Salen-type ligands derived from different diamines including 1,2-ethylenediamine (Et-1–Et-4), 1,2-cyclohexanediamine (Cy-1 and Cy-2), 1,2-phenylenediamine (Ph-1–Ph-3 and PhMe-1–PhMe-4), and dicyano-1,2-ethenediamine (CN-1) has been designed and prepared. Sulfonate groups of ligands ensure good stability and solubility in water without affecting their excited state properties. These ligands exhibit strong UV/Vis-absorption and blue, green, or orange fluorescence. Time-dependent-density functional theory calculations have been undertaken to reveal the influence of ligand nature, especially sulfonate groups, on the frontier molecular orbitals. Since their fluorescence is selectively quenched by Cu²⁺, the sulfonato-Salen-type ligands can be used as highly selective and sensitive turn-off fluorescence sensors for the detection of Cu²⁺ in water and fluorescence imaging in living cells.