Light‐Induced CH Arylation of (Hetero)arenes by In Situ Generated Diazo Anhydrides

Diazo anhydrides (Ar?N?N?O?N?N?Ar) have been known since 1896 but have rarely been used in synthesis. This communication describes the development of a photochemical catalyst‐free C?H arylation methodology for the preparation of bi(hetero)aryls by the one‐pot reaction of anilines with tert‐butyl nitrite and (hetero)arenes under neutral conditions. The key step in this procedure is the in situ formation and subsequent photochemical (>300 nm) homolytic cleavage of a transient diazo anhydride intermediate. The generated aryl radical then efficiently reacts with a (hetero)arene to form the desired bi(hetero)aryls producing only nitrogen, water, and tert‐butanol as byproducts. The scope of the reaction for several substituted anilines and (hetero)arenes was investigated. A continuous‐flow protocol increasing selectivity and safety has been developed enabling the experimentally straightforward preparation of a variety of substituted bi(hetero)aryls within 45 min of reaction time.     

Streamlined construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation in solution and on DNA

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed. The method exhibits a broad substrate scope for thiols, aryl iodides and amino acid units. Peptide macrocycles of a wide range of size and composition can be readily assembled in high yield from various easily accessible building blocks. This method has been successfully employed to prepare an 8-million-membered tetrameric cyclic peptide DNA-encoded library (DEL). Preliminary screening of the DEL library against protein p300 identified compounds with single digit micromolar inhibition activity.

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed.     

A convenient procedure for palladium catalyzed cyanation using a unique bidentate phosphorus ligand

A palladium complex bearing 1,2-diphenyl-3,4-diphosphinidenecyclobutene ligand (DPCB) has been used to facilitate the catalytic cyanation of aryl bromides. A series of substituted benzonitriles was prepared in good to high yields by the treatment of the corresponding aryl bromides with Zn(CN)₂ in N-methyl-2-pyrrolidone in the presence of 2-4 mol % catalyst at 100 °C for 16 h.     

2-(Alkylamino)-3-aryl-6,7-dihydrobenzofuran-4(5H)-ones: Improved Synthesis and their Photophysical Properties

Furans are an important class of compounds and exhibit a diverse range of activities and properties. As such, improved synthetic access to furans is an important research goal. In the present report, a solvent- and catalyst-free reaction between 5,5-dimethyl-1,3-cyclohexanedione (dimedone), an aryl aldehyde and an isocyanide under microwave irradiation is presented. This method is significantly improved from previously described protocols in terms of applicability of wide ranging aryl aldehydes, better yields, shorter reaction times, facile work up and essentially no need of column chromatography. The photophysical properties of this series of compounds were studied for their possible applicability in the field of metal ion sensors. In solution, two compounds, 2-(cyclohexylamino)-3-(1H-indol-3-yl)-6,6-dimethyl-6,7-dihydrobenzofuran-4(5H)-one (1 i) and 2-(tert-butylamino)-3-(1H-indol-3-yl)-6,6-dimethyl-6,7-dihydrobenzofuran-4(5H)-one (1 j), underwent an observable color change from yellow to colorless in the presence of aluminum(III) ions. Further studies to investigate the UV absorption and luminescence behavior of these compounds revealed their utility as “naked-eye sensors” for aluminum detection.     

A practical multigram-scale method for the green synthesis of 5-substituted-1H-tetrazoles in deep eutectic solvent

A series of 5-substituted-1H-tetrazoles have been efficiently synthesized in moderate to excellent yields (68–90%) under mild reaction conditions by combining aryl aldehydes, hydroxylamine hydrochloride with sodium azide in the presence of catalytic amount of Cu(OAc)₂ in deep eutectic solvent (DES). The new synthetic method has many advantages, such as high conversion, green reaction medium, easy work-up, low cost, and environment friendly.     

Co2(CO)8 as a convenient in situ CO source for the direct synthesis of benzamides from aryl halides (Br/I) via aminocarbonylation

A fast, mild, and functional group tolerant method for the direct synthesis of benzamides from aryl halides (Br, I) via aminocarbonylation, using solid Co₂(CO)₈ as a convenient CO source, has been demonstrated. The developed method is applicable to a wide variety of 1° and cyclic and acyclic 2° amines. Nitro substituted (o, m and p) aryl halides have easily been converted to the corresponding benzamides, without the reduction of the nitro group, in high yields using this in situ carbonylation methodology under microwave irradiation.     

Copper-catalyzed cross-coupling of sulfonamides with aryl iodides and bromides facilitated by amino acid ligands

A highly general, convenient, and inexpensive catalyst system was developed for the N-arylation of sulfonamides with aryl iodides or bromides by using 5-20 mol % of CuI as catalyst, 20 mol % of N-methylglycine (for aryl iodides) or N,N-dimethylglycine (for aryl bromides) as ligand, and K₃PO₄ as base.     

Clean preparation of S-thiocarbamates with in situ generated hydroxide in 2-methyltetrahydrofuran

A simple and clean protocol for the synthesis of various alkyl and (hetero)aryl S-thiocarbamates was established. The usage of in situ generated hydroxide as both an oxygen source and hydrogen source as well as biomass-derived 2-methyltetrahydrofuran as a green reaction medium, the avoidance of phosphorus-containing reductant, and the generation of harmless water and nitrogen as the side-products have given the present method atom-economy and environmental friendliness.     

First use of a palladium complex with a thiosemicarbazone ligand as catalyst precursor for the Heck reaction

A novel palladium complex with salicylaldehyde N(4)-ethylthiosemicarbazone has been synthesized and according to its crystal structure the ligand is bound to the metal in an O, N, S-terdentate coordination mode. This phosphorus-free system efficiently catalyzes the Heck reaction of aryl bromides (from electron-rich to electron-poor) with styrene under argon, with turnover numbers of up to 43,000, at 150 °C after 24 h, and with a selectivity toward trans-stilbenes ranging from 92 to 96%. In air, for activated aryl bromides and for a palladium concentration of 1 mM, the yields are essentially the same as those obtained when the reaction was performed under argon.     

An expeditious aqueous Suzuki-Miyaura method for the arylation of bromophenols

The development of a novel Suzuki-Miyaura method has been achieved to allow the efficient arylation of bromophenols. A range of functionality is tolerated with regard to the boronic acid coupling partner and the reaction exhibits complete chemoselectivity for the C_aryl-Br bond versus the C_aryl-Cl bond in the aryl halide input. The experimental protocol features a short reaction time of 15 min, utilizes inexpensive Pd/C as a catalyst, and is conducted with water as the solvent.     

Organic functionalization of the surface of silica with arylsilanes. A new method for synthesizing organic-inorganic hybrid materials

Organic functionalization of a silica surface has been realized by employing arylsilanes. Grafting reactions of aryl(3-chloropropyl)dimethylsilanes (aryl = p-anisyl, p-tolyl, phenyl) with silica were carried out in heptane at 80 °C for 24 h. The ²⁹Si and ¹³C CP/MAS spectra of the obtained silica materials clearly showed that the 3-chloropropyldimethylsilyl moieties were cleanly grafted onto silica via a siloxane (Si-O-Si) bond accompanied by the release of the aryl groups. The loading amounts on FSM-type mesoporous silica (TMPS-4) with aryl(3-chloropropyl)dimethylsilanes were comparable to those with 2-propenylsilane and the most commonly used methoxysilane.     

An efficient, mild, and selective Ullmann-type N-arylation of indoles catalyzed by copper(I) complex

A wide range of N-arylated indoles are selectively synthesized through intermolecular C(aryl)-N bond formation from the corresponding aryl iodides and indoles through Ullmann-type coupling reactions in the presence of a catalytic amount of easily available N,N,N′,N′-tetramethyl-BINAM-CuI complex under very mild reaction conditions.     

Synthesis of MAPA Reagents and 2-Alkyl(aryl)aminopyridines from 2-Bromopyridine Using the Goldberg Reaction

A short and economical synthesis of various 2-methylaminopyidine amides (MAPA) from 2-bromopyridine has been developed using the catalytic Goldberg reaction. The effective catalyst was formed in situ by the reaction of CuI and 1,10-phenanthroline in a 1/1 ratio with a final loading of 0.5–3 mol%. The process affords high yields and can accommodate multigram-scale reactions. A modification of this method provides a new preparation of 2-N-substituted aminopyridines from various secondary N-alkyl(aryl)formamides and 2-bromopyridine. The intermediate aminopyridine formamide is cleaved in situ through methanolysis or hydrolysis to give 2-alkyl(aryl)aminopyridines in high yields.     

A carboranylpentaphenylbenzene

1-(o-Carboran-9-yl)-2,3,4,5,6-pentaphenylbenzene (1) was prepared by the Diels-Alder reaction of 9-phenylethynyl-o-carborane and tetraphenylcyclopentadienone at 300 °C. An X-ray crystal structure of 1 shows that the steric demands of the carborane induce a significant stretching of the aryl carbon-boron bond as well as a variety of distortions of the central benzene ring, the ortho phenyl groups, and the carborane cage.     

Water-acetic acid mediated an efficient and eco-friendly protocol for the one-pot synthesis of bis-isoxazolyl amino dihydro-1H-indol-4(5H)-ones under mild reaction conditions

A cost-effective and eco-friendly straightforward synthesis of new bis-isoxazolyl amino dihydro-1H-indol-4(5H)-ones is successfully achieved via one-pot three-component reaction of N-isoxazolyl enaminone, aryl glyoxal monohydrates and 4-amino-3-methyl-5-styrylisoxazoles by using water as a reaction medium and acetic acid (AcOH) as cheap and green promoter. The protocol proves to be an efficient and environmentally benign in terms of high yields, low reaction time, operational simplicity, metal-free and wide substrates scope. Most important of all, this reaction process is green.     

Highly enantioselective aldehyde-nitroolefin Michael addition reactions catalyzed by recyclable fluorous (S) diphenylpyrrolinol silyl ether

A recyclable and reusable (S) diphenylpyrrolinol silyl ether I organocatalyst bearing a n-C₈F₁₇ fluorous tag has been demonstrated for promoting the asymmetric Michael addition reactions of a wide range of aldehydes with both aryl and alkyl-substituted nitroolefins and excellent levels of enantio- and diastereoselectivities are achieved. The catalyst I can be conveniently recovered by fluorous solid-phase extraction and subsequently reused (up to eight cycles) without significant loss of its catalytic activity and stereoselectivity for the process.     

N-Sulfonyl acetylketenimine as a highly reactive intermediate for synthesis of N-Aroylsulfonamides

A highly reactive intermediate N-sulfonyl acetylketenimine was generated from an ynone-participated CuAAC/ring-opening method. Its unique structure allowed it to react with aryl carboxylic acids to give N-aroylsulfonamides via a novel Mumm-type rearrangement.     

A green and fast chromatographic method for determining organic compound mobility in soils

Soil leaching column chromatography (SLCC) employing totally aqueous mobile phases has been used for the estimation of retardation factors (R) of heterocyclic compounds and heteroatom-substituted aryl derivatives Aniline, Aniside, Cresol, Hydroquinone, p-Nitroaniline, Phenol, Phenylenediamine, Piridine, Sulfanilamide, Sulfathiazole, Sulfamethoxazole, Metolachlor and Toluene in soils with low fraction of organic carbon. Small columns (0.39 cm × 10 cm i.d.) were packed with soils of different compositions (alluvial sediment, coarse sand and standard Eurosoil4 mixed with quartz). The theory of linear chromatography was employed to correlate statistical peak moments to R. Rs estimated through SLCC were compared with those derived from water–organic carbon partitioning coefficient reported in the literature. The adsorption isotherm of Metolachlor was measured by frontal analysis on a small column packed with alluvial sediment. The approach proposed for measuring the adsorption isotherm requires small amounts of chemicals and soils and does not need fraction collection nor detector calibration. The information obtained by SLCC experiments was used to predict the elution of Metolachlor and Phenol on a large column (8.9 cm × 100 cm i.d.) packed with alluvial sediment. The method used in this work, not making use of any chemical solvents, respects the fundamental concepts of green chemistry.     

An inexpensive and highly stable ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine for Mizoroki-Heck and room temperature Suzuki-Miyaura cross-coupling reactions

A bulky, inexpensive and simple bidentate ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine (1) has been synthesized and characterized. The palladium catalyst was formed by combination of 1 with [Cl₂Pd(COD)] in a ratio of 1:1, tested in the Suzuki-Miyaura and Mizoroki-Heck cross-coupling reactions. Coupling of a variety of aryl bromides with phenylboronic acid using methanol as solvent at room temperature, or at 60 °C, gave generally high yields of coupled products. Coupling of aryl chlorides with organoboron reagent at 110 °C in DMF afforded good yields of biaryls under aerobic conditions. This non-phosphorus, air and moisture stable catalyst also displays good activity for Mizoroki-Heck coupling reaction in methanol at 60 °C with various aryl chlorides and bromides.     

Fluorogenic derivatization of aryl halides based on the formation of biphenyl by Suzuki coupling reaction with phenylboronic acid

The fluorogenic derivatization method for aryl halide was developed for the first time. This method was based on the formation of fluorescent biphenyl structure by Suzuki coupling reaction between aryl halides and non-fluorescent phenylboronic acid (PBA). We measured the fluorescence spectra of the products obtained by the reaction of p-substituted aryl bromides (i.e., 4-bromobenzonitrile, 4-bromoanisole, 4-bromobenzoic acid ethyl ester and 4-bromotoluene) with PBA in the presence of palladium (II) acetate as a catalyst. The significant fluorescence at excitation maximum wavelength of 275–290 nm and emission maximum wavelength of 315–350 nm was detected in all the tested aryl bromides. This result demonstrated that non-fluorescent aryl bromides could be converted to the fluorescent biphenyl derivatives by the coupling reaction with non-fluorescent PBA. We tried to determine these aryl bromides by HPLC-fluorescence detection with pre-column derivatization. The aryl bromide derivatives were detected on the chromatogram within 30 min without any interfering peak derived from the reagent blank. The detection limits (S/N = 3) for aryl bromides were 13–157 fmol/injection.