The crystal and molecular structure of dicarbonylbis(diphenylethylphosphine) platinum(0) Pt(CO)2[P(C6H5)2(C2H5)]2

The complex dicarbonylbis(diphenylethylphosphine)platinum, Pt(CO)₂[P(C₆H₅)₂(C₂H₅)]₂, crystallizes in either of the enantiomorphous space groups P3₁21 (No. 152) and P3₂21 (No. 154) with cell dimensions a = 10.64(1), c = 22.06(1) Å, U = 2163 ų; p_c = 1.564 g/cm³ for Z = 3, p_m = 1.55(3) g/cm³. The intensities of 1177 independent reflections have been determined by counter methods with MoKα monochromatized radiation. The structure has been solved by the heavy atom method. The refinement, carried out by full-matrix least squares down to a final R factor of 0.042, has enabled the absolute configuration of the crystal sample (space group P3₁21) to be ascertained. The molecule is roughly tetrahedral, and has the metal atom lying on a two-fold axis of the cell. Bond parameters are: PtC = 1.92(2) Å, PtP = 2.360(4) Å, CPtC = 117(1)° and PPtP = 97.9(2)°. The PtC₂ and PtP₂ moieties make a dihedral angle of 86.0(3)°. The overall C₂ symmetry of the molecule is probably only a statistically averaged situation, a disorder in the PtCO interactions being apparent from the orientations of the thermal ellipsoids of the C and O atoms.     

High-yield syntheses of [Rh7(CO)16] and [Rh14(CO)25] working in ethylene glycol solution under 1 atm of CO

The anionic rhodium carbonyl clusters [Rh₇(CO)₁₆]³⁻ and [Rh₁₄(CO)₂₅]⁴⁻ can be easily prepared by a new simple and high yield one-pot synthesis starting from RhCl₃·nH₂O dissolved in ethylene glycol and involving two steps: (i) treatment of RhCl₃·nH₂O under 1 atm of CO at 50 °C to give [Rh(CO)₂Cl₂]⁻; (ii) addition of a base (CH₃CO₂Na or Na₂CO₃) followed by reductive carbonylation under 1 atm of CO at an adequate temperature (50 °C for [Rh₇(CO)₁₆]³⁻; 150 °C for [Rh₁₄(CO)₂₅]⁴⁻). These new syntheses are more convenient than those previously reported, especially since such clusters are not accessible via silica surface-mediated reactions. This different behavior is due to the particular stabilization on the silica surface and under 1 atm of CO of an anionic carbonyl cluster, called A, which does not allow the formation of a higher nuclearity carbonyl cluster, called B, which was shown to be the key-intermediate in the synthesis of [Rh₁₄(CO)₂₅]⁴⁻ working in ethylene glycol solution. Although it was not possible to isolate crystals of A and B suitable for X-ray structural determination, a combination of cyclovoltammetry, one of the few examples so far available of the use of this technique for anionic rhodium carbonyl clusters, infrared spectroscopy and elemental analyses suggest that A and B are probably the never reported [Rh₇(CO)₁₄]⁻ and [Rh₁₅(CO)₂₈]³⁻ clusters, respectively. In particular the tentative formulation of the two clusters was carried out by a non-conventional method based on the existence of a linear correlation between carbonyl frequencies of the main band and the [(charge/Rh atoms)/CO number] ratio.     

Synthesis and characterisation of HRuRh3(CO)12. Crystal structures of HRuRh3(CO)12, HRuRh3(CO)10(PPh3)2 and HRuCo3(CO)10(PPh3)2

A new ruthenium-rhodium mixed-metal cluster HRuRh₃(CO)₁₂ and its derivatives HRuRh₃(CO)₁₀(PPh₃)₂ and HRuCo₃(CO)₁₀(PPh₃)₂ have been synthesized and characterized. The following crystal and molecular structures are reported: HRuRh₃(CO)₁₂: monoclinic, space group P2₁/c, a 9.230(4), b 11.790(5), c 17.124(9) Å, β 91.29(4)°, Z = 4; HRuRh₃(CO)₁₀(PPh₃)₂·C₆H₁₄: triclinic, space group P$\text{1}$, a 11.777(2), b 14.079(2), c 17.010(2) Å, α 86.99(1), β 76.91(1), γ 72.49(1)°, Z = 2; HRuCo₃(CO)₁₀(PPh₃)₂·CH₂Cl₂: triclinic, space group P$\text{1}$, a 11.577(7), b 13.729(7), c 16.777(10) Å, α 81.39(4), β 77.84(5), γ 65.56°, Z = 2. The reaction between Rh(CO)₄^? and (Ru(CO)₃Cl₂)₂ tetrahydrofuran followed by acid treatment yields HRuRh₃(CO)₁₂ in high yield. Its structural analysis was complicated by a 80–20% packing disorder. More detailed structural data were obtained from the fully ordered structure of HRuRh₃(CO)₁₀(PPh₃)₂, which is closely related to HRuCo₃(CO)₁₀(PPh₃)₂ and HFeCo₃(CO)₁₀(PPh₃)₂. The phosphines are axially coordinated.     

The reaction of Ru3(CO)12 and Os3(CO)12 with PH2Ph; the x-ray crystal structures of HRu3(CO)10(PHPh) and H2Ru3(CO)9(PPh)

Twelve new trinuclear complexes containing terminal PH₂Ph, edge-bridging PHPh and/or capping PPh ligands have been isolated from the reaction of M₃(CO)₁₂ (M = Ru or Os) with PH₂Ph in refluxing solvents. HRu₃(CO)₁₀(PHPh) (IIIa) crystallises in the monoclinic space group P2₁/c with a = 8.761(3), b = 11.402(4), c = 22.041(7) Å,β = 98.89(2)°, and Z = 4. The structure was solved by a combination of direct methods and Fourier difference techniques, and refined by blocked-cascade least squares to R = 0.027 for 3676 unique observed intensities. The X-ray analysis shows that one edge of the Ru₃ triangle is bridged by a hydride and the PHPh ligand, and that the phosphorus-bound hydrogen atom lies over the metal triangle and the phenyl group away from it. This provides an explanation for the ready formation of the capped species H₂Ru₃(CO)₉(PPh) (Va) on pyrolysis of the edge-bridged complex as opposed to the previously reported conversion of HOs₃(CO)₁₀(NHPh) to an orthometallated derivative under similar conditions. An X-ray analysis of H₂Ru₃(CO)₉-(PPh) (Va) confirms the capped geometry. the complex crystallises in the monoclinic space group P2₁/n with a = 9.323(4), b = 15.110(6), c = 45.267(15) Å,β = 91.84(3)°, and Z = 12. the structure was solved and refined using the same techniques as described previously. The final residual R is 0.061 for 4839 reflections. Some reactions of Va show that the phosphorous cap is difficult to displace and stabilises the molecule with respect to decomposition to non-cluster species.     

Conversion of alkynes to cyclic imides and anhydrides using reactive iron carbonyls prepared from Fe(CO)5 and Fe3(CO)12

Alkyne-iron carbonyl complexes, prepared using Fe(CO)₅-NaBH₄-CH₃COOH-amine-alkyne and Fe₃(CO)₁₂-amine-alkyne reagent systems, react with excess of amine at 25 °C to give cyclic imides in moderate to good yields. Further, unsaturated iron carbonyl species, prepared using the Fe(CO)₅-pyridine-N-oxide system, react with alkynes to give the corresponding anhydrides.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Ligand substitution of FeRu2(CO)12 and Fe2Ru(CO)12 with tertiary phosphines and phosphites

Ligand substitution of the mixed-metal clusters FeRu₂(CO)₁₂ and Fe₂Ru(CO)₁₂ with triphenylphosphine and trimethylphosphite has been studied. Mono- and di-substituted derivatives have been synthesized and characterized structurally. The following crystal and molecular structures are reported: Fe₂Ru(CO)₁₁PPh₃: triclinic, space group P$\text{1}$, a 9.203(2), b 11.903(3), c 15.117(4) Å, α 81.54(2), β 87.28(2), γ 66.72(2)°, Z = 2; Fe₂Ru(CO)₁₁P(OMe)₃: orthorhombic, space group Pna2₁, a 17.220(5), b 14.572(4), c 8.708(6) Å, Z = 4, FeRu₂(CO)₁₁PPh₃: monoclinic, space group P2₁/n, a 11.435(3), b 16.034(5), c 16.642(4) Å, β 93.35(2)°, Z = 4; FeRu₂(CO)₁₀(PPh₃)₂: orthorhombic, space group Pccm, a 14.854(4), b 17.180(7), c 16.786(12) Å, Z = 4.Ligand substitution is found to occur preferentially at the ruthenium centers of the FeRu₂ and Fe₂Ru clusters. Monosubstitution causes expansion of both of the clusters while the overall geometry is practically unchanged. Disubstitution of FeRu₂(CO)₁₂ causes contraction of the cluster and leads to a formation of carbonyl bridges. The structural trends have been interpreted in terms of electronic and packing effects of ligand substitution. The X-ray structures of Fe₂Ru(CO)₁₂ and FeRu₂(CO)₁₂ are not known; the ligand substitution studies indicate that Fe₂Ru(CO)₁₂ has the same structure as Fe₃(CO)₁₂, and that FeRu₃(CO)₁₂ does not have a Ru₃(CO)₁₂ structure as postulated previously from the IR studies.     

On the catalytic duo PdCl2(PPh3)2/AuCl(PPh3) that cannot effect a Sonogashira-type reaction: a correction

In contrast to the observation made by the Laguna group, we report that the combination of PdCl₂(PPh₃)₂ and AuCl(PPh₃) makes a unique catalytic system that allows Sonogashira-type cross-coupling of both aryl and alkyl alkynes with aryl halides in excellent yields.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Katalytische isomerisierung von heptenen mit IrX(CO)L2

1-, 2-cis-, 2-trans-, and 3-trans-heptenes (C₇)are isomerized either very slowly or not at all with IrX(CO)L₂ at 80°C in toluene and under N₂. However, under the conditions of hydrogenation fast isomerisation takes place. With IrCl(CO)L₂ as catalyst the rate of isomerisation decreases the order: 1-C₇ ∼ 2-cis-C₇ > 3-trans-C₇ > 2-trans-C₇. This sequence is independent of the ligand L in lrCl(CO)L₂, however, with a particular isomer the rate of isomerisation is a function of L in the order L = PPh₃ > P(C₆H₁₁)3 > P(OPh)₃.     

Photoinduced formation of phosphido-bridged clusters derived from Ru3(CO)9(PPh2H)3. Crystal and molecular structure of Ru3(μ-H)(μ-PPh2)3(CO)7

The new complex Ru₃(CO)₉(PPh₂H)₃ (I) was prepared by the direct thermal reaction of Ru₃(CO)₁₂ with PPh₂ H and was spectroscopically characterized. Irradiation of I with λ ≥ 300 nm leads to the formation of Ru₂(μ-PPh₂)₂(CO)₆ (II) and three new phosphido-bridged complexes, Ru₃(μ-H)₂(μ-PPh₂)₂(CO)₈ (III), Ru₃(μ-H)₂(μ-PPh₂)₂(CO)₇(PPh₂H) (IV) and Ru₃(μ-H)(μ-PPh₂)₃(CO)₇ (V). These complexes have been characterized spectroscopically and Ru₃ (μ-H)(μ-PPh₂)₃(CO)₇ by a complete single crystal X-ray structure determination. It crystallizes in the space group P2₁/n with a 20.256(3), b 22.418(6), c 20.433(5) Å, β 112.64(2)°, V 8564(4) ų, and Z = 8. Diffraction data were collected on a Syntex P2₁ automated diffractometer using graphite-monochromatized Mo-K_α radiation, and the structure was refined to R_F 4.76% and R_wF 5.25% for the 8,847 independent reflections with F₀ > 6σ(F₀). The structure consists of a triangular array of Ru atoms with seven terminal carbonyl ligands, three bridging diphenylphosphido ligands which bridge each of the RuRu bonds, and the hydride ligand which bridges one RuRu bond. Complex IV was also shown to give V upon photolysis and is thus an intermediate in the photoinduced formation of V from I.     

A new and unusual isomerism in [Fe(CO)2 {P(OR)3}2 (SO2)] complexes (R = aryl)

[Fe(CO)₂ {P(OR)₃}₂ (SO₂)] complexes (R = aryl) exist in solution as equilibrium mixtures of two isomers; both have been shown by X-ray diffraction studies (where R = Ph or o-MeC₆H₄) to have planar coordination about SO₂ and trigonal bipyramidal coordination about Fe, but in one isomer (R = Ph) the equatorial plane is occupied by SO₂ and two CO ligands whilst in the other one (R = o-MeC₆H₄) it is occupied by the SO₂ and two P ligands.     

Syntheses and structural studies on two cycloruthenapentadienyl complexes: [(CO)3RuC4(CH2OH)4]Ru(CO)3·H2O and [(CO)3RuC4(CH2CH2OH)2(C2H5)2]Ru(CO)3

Syntheses and single-crystal X-ray diffraction studies have been completed on two cycloruthenapentadienyl (CO)₆Ru₂L₂ derivatives, with L = CH₂OHC = CCH₂OH and C₂H₅C=CCH₂CH₂OH respectively. Crystal data are as follows: for [(CO)₃RuC₄(CH₂OH)₄]Ru(CO)₃·H₂O, P2₁/c, a 13.72(1), b 9.501(4), c 14.86(1) Å, β 101.10(6)°, R_w = 0.052 for 1911 reflections; for [(CO)₃RuC₄(CH₂CH₂OH)₂(C₂H₅)₂]Ru(CO)₃, P2₁/c, a 9.191(3), b 16.732(4), c 14.903(3) Å, β 113.61(4)°, R_w = 0.042 for 2865 reflections. Both compounds are built up from binuclear units, each unit being regarded as a Ru(CO)₃ fragment π-bonded to a cycloruthenapentadienyl ring. The molecular parameters are compared with those of known cyclometallapentadienyl complexes of transition metals. The presence of a semi-bridging CO group is discussed.     

Crystal and molecular structure of (η3-allyl)carbonylchlorobis(dimethylphenylphosphine)- iridium(III) hexafluorophosphate, [Ir(η3-C3H5)Cl(CO)(P(CH3)2(C6H5))2][PF6

The structure of (η³-allyl)carbonylchlorobis(dimethylphenylphosphine)-iridium(III) hexafluorophosphate, [Ir(η³-C₃H₅)Cl(CO)(P(CH₃)₂(C₆H₅))₂][PF₆], has been determined from three-dimensional X-ray data to add support for a proposed mechanism of the oxidative addition of allyl halides to IrX(CO)(PR₃)₂ (X = halide). The compound crystallizes in space group C⁵_2h-P2₁/c with four formula units in a cell of dimensions a = 11.027(1), b = 12.230(2), c = 19.447(5) Å, and β = 103.16(2)⁰. Least-squares refinement of the structure has led to a value of the conventional R index (on F) of 0.066 for the 3018 independent reflections having F²₀>3—(F²₀). The crystal structure consists of discrete, monomericions. The hexafluorophosphate anion is disordered. The coordination geometry around the iridium atom may be described as octahedral, with the chloro ligand trans to the carbonyl group and each phosphorus atom trans to a terminal carbon of the allyl group. Structural parameters: Ir—P = 2.366(4), 2.347(3);Ir—Cl = 2.389(3); Ir—C(allyl) = 2.28(1), 2.24(1),2.25(1); Ir—C (carbonyl) = 1.85(1) Å; P—Ir—P = 105.7(1); C(terminal)—Ir—C(terminal) = 66.2(8); C—C—C = 125(2)^o. The allyl group makes an angle of 126^o with the P—Ir—P plane. Correlations between geometric structure and number of d electrons are noted among several M—C₃H₅-complexes, and are interpreted in the light of theoretical models of the M—C₃H₅- bond.     

The use of Cr (CO)6 as an alternative CO source in Pd‐catalyzed C‐N bond formation: Synthesis of benzamides

An efficient strategy for the synthesis of benzamides from acetamides and aryl iodides using 1 mol% Pd (OAc)₂ as catalyst and Cr (CO)₆ as CO‐precursor is described. This new synthetic methodology displays high functional group tolerance on both substrates and avoids the need for ligands, reducing agents, or other additives. The corresponding products were obtained in good to excellent yields at atmospheric pressure under mild reaction conditions.     

Microwave-assisted, Mo(CO)6-mediated, palladium-catalyzed amino-carbonylation of aryl halides using allylamine: from exploration to scale-up

Palladium-catalyzed aminocarbonylations of various (hetero)aryl halides with allylamine using Mo(CO)₆ as a solid, in situ CO source, were explored. Microwave-enhanced conditions proved to be highly useful in promoting the conversions in a mere 10-20 min with various (hetero)aryl iodides, bromides and chlorides. The scale-up of a microwave-enhanced aminocarbonylation to 25 mmol scale was performed successfully.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Microwave-enhanced and ligand-free copper-catalyzed cyanation of aryl halides with K4[Fe(CN)6] in water

Copper-catalyzed cyanation of aryl halides was improved to be more economical and environmentally friendly by using water as the solvent and ligand-free Cu(OAc)₂·H₂O as the catalyst under microwave heating. The suggested methodology was applicable to a wide range of substrates including aryl iodides and activated aryl bromides.     

Hydrothermal Synthesis and Spectroscopic and Magnetic Behavior of the Mn7(HOXO3)4(XO4)2(X=As, P) Compounds. Crystal Structure of Mn7(HOAsO3)4(AsO4)2

The Mn₇(HOXO₃)₄(XO₄)₂ (X=As, P) compounds have been synthesized by using hydrothermal conditions. The arsenate phase was obtained under autogeneous pressure at 170°C. However, more drastic conditions at both pressure and temperature were necessary in the attainment of the phosphate compound. The crystal structure of Mn₇(HOAsO₃)₄(AsO₄)₂ was solved using single-crystal data. The unit-cell parameters are a=6.810(3) Å, b=8.239(2) Å, c=10.011(4) Å, α=104.31(2)°, β=108.94(3)°, γ=101.25(2)°. Triclinic, P-1 with Z=1. The isostructural Mn₇(HOPO₃)₄(PO₄)₂ phase was characterized from X-ray powder diffraction techniques. The crystal structure of both compounds consists of zig-zag chains constructed by dimeric edge-sharing Mn₂O₁₀ octahedra linked through the MnO₅ trigonal bipyramids. The three-dimensional framework is completed by the connection between isolated MnO₆ entities to the dimers octahedra and trigonal bipyramids. The existence of hydrogenarsenate and hydrogenphosphate anions has been confirmed by IR and Raman spectroscopies. Magnetic measurements indicate the existence of antiferromagnetic interactions in both compounds, which are slightly stronger in the arsenate phase.     

Reactions of isonitriles with [Fe3(CO)12] and [Ru3(CO)12] monitored by electrospray mass spectrometry: structural characterisation of [Fe3(CO)10(CNPh)2] and [Ru4(CO)11(μ3-η-CNPh)2(CNPh)]

The reactions of [Fe₃(CO)₁₂] or [Ru₃(CO)₁₂] with RNC (R=Ph, C₆H₄OMe-p or CH₂SO₂C₆H₄Me-p) have been investigated using electrospray mass spectrometry. Species arising from substitution of up to six ligands were detected for [Fe₃(CO)₁₂], but the higher-substituted compounds were too unstable to be isolated. The crystal structure of [Fe₃(CO)₁₀(CNPh)₂] was determined at 150 and 298 K to show that both isonitrile ligands were trans to each other on the same Fe atom. For [Ru₃(CO)₁₂] substitution of up to three COs was found, together with the formation of higher-nuclearity clusters. [Ru₄(CO)₁₁(CNPh)₃] was structurally characterised and has a spiked-triangular Ru₄ core with two of the CNPh ligands coordinated in an unusual μ₃-η² mode.