Solvohyperiodination. A comparison with solvothallation

C₆H₅IO/CH₃OH and a catalyst such as FSO₃H , CF₃SO₃H or BF₃-Et₂O as well as C₆H₅(OH)OTs-CH₃OH,react with chalcones, acetophenones and styrenes to yield rearranged products. The overall course of these reactions is analogous to that of Tl(NO₃)₃-CH₃OH in reaction with the same compounds.     

A New Route to Metal Azides

Beside several other applications, metal azides can be used for the synthesis of nitridophosphates and binary nitrides. Herein we present a novel synthetic access to azides: Several metals, such as main‐group, transition metals, and rare‐earth metals, react with silver azide in liquid ammonia as a solvent giving the corresponding metal azides. In this work Mn(N₃)₂, Sn(N₃)₂, and Eu(N₃)₂, as well as their ammonia complexes were synthesized for the first time through low‐temperature methods. Also a simpler access to Zn(N₃)₂ was possible. At room temperature and the respective vapor pressure of NH₃, it became possible to grow single crystals of the dinuclear holmium azide [Ho₂(μ‐NH₂)₃(NH₃)₁₀](N₃)₃?1.25 NH₃. We are confident that this new route could lead to novel metal azides as well as nitrides of the main‐group, the transition, and the rare‐earth metals upon careful decomposition.     

Cobalt‐Catalyzed Transformation of Molecular Dinitrogen into Silylamine under Ambient Reaction Conditions

The first successful example of cobalt‐catalyzed reduction of N₂ with Me₃SiCl and Na as a reductant, under ambient reaction conditions, gives N(SiMe₃)₃, which can be readily converted into NH₃. In this reaction system, 2,2′‐bipyridine (bpy) is found to work as an effective additive to improve substantially the catalytic activity. Co?N₂ complexes bearing three Me₃Si groups as ancillary ligands are considered to work as key reactive species based on DFT calculations. The DFT results also allow the proposal of a detailed reaction pathway for the transformation of N₂ into N(SiMe₃)₃.     

新型磁性荧光Fe3O4-CdSe纳米复合材料的制备

以1-十八烯作为高沸点溶剂, 在磁性粒子表面沉积量子点获得新型的磁性荧光Fe₃O₄-CdSe 纳米异质结构. 首先以乙酰丙酮铁(Fe(acac)₃)为前驱体, 二苯醚为溶剂, 油酸为表面活性剂和油胺(OAm)为表面活性剂兼还原剂, 通过溶剂热法制备单分散性的Fe₃O₄ 纳米粒子. 然后以1-十八烯为高沸点溶剂, CdO 为镉源,TOP-Se为硒源, 十六胺为表面活性剂以及硬脂酸为生长促进剂和成核剂制备得到新型的Fe₃O₄-CdSe纳米异质结构. 通过透射电镜(TEM), 傅里叶变换红外(FTIR)光谱, X射线衍射(XRD)谱, X射线光电子能谱(XPS)分析仪, 振动样品磁强计(VSM), 紫外-可见(UV-Vis)光谱和光致发光(PL)等手段对Fe₃O₄-CdSe 纳米复合材料的结构和性能进行表征. 结果表明, CdSe纳米粒子成功地吸附在Fe₃O₄纳米粒子表面, 并沿着c轴生长, 形成了宽3.6 nm, 长分别为14.5 和32.5 nm的新型枣核状和钉子状的异质结构体. 这种新型的Fe₃O₄-CdSe纳米复合材料是由磁铁矿Fe₃O₄和六方形的CdSe棒状结构组成, 具有较好的荧光性能和超顺磁性. 随着CdSe棒长度的增加, 荧光吸收峰向长波方向移动. Fe₃O₄纳米粒子, 枣核状和钉子状的Fe₃O₄-CdSe纳米复合材料的饱和磁化强度分别是57.80, 40.76和31.10 emu·g^-1.     

Synthesis of 14C-radiolabelled trimethyllead chloride

Two synthetic routes to ¹⁴C-labelled trimethyllead chloride ((CH₃)₃PbCl) from ¹⁴C-methyl iodide (CH₃I) were investigated. Alkylation of (CH₃)₃PbCl with labelled methylmagnesium halide, on a microscale, was less efficient for the synthesis of tetramethyllead ((CH₃)₄Pb) than was an electrochemical reduction of labelled CH₃I at a sacrificial lead cathode. In the Grignard approach, unlabelled decyl bromide served as an initiator for the reaction of ¹⁴C-CH₃l with excess Mg and as a carrier during the subsequent alkylation of (CH₃)₃PbCl. In the electrochemical approach a two-compartment cell, using dimethylformamide as solvent and sodium perchlorate as supporting electrolyte, offered several advantages over a single compartment reactor. The labelled (CH₃)₄Pb from both reactions was isolated by extraction, converted to (CH₃)₃PbCl by controlled oxidation with HCl and purified by thin layer chromatography.     

Synthesis of highly substituted quinolines via heterocyclization of fluorinated acetylenephosphonates with ortho-aminoaryl ketones

A synthetic route to a series of 4-alkyl- or arylquinolines, bearing in 2- and 3-position fluorinated and phosphonate functions at the same time, is reported for the first time. These compounds are synthesized via regioselective heterocyclization of XCF₂-alkynylphosphonates (X=F, Cl, Br, H, CF₃) with ortho-aminoaryl ketones (R=CH₃, CF₃, Ph) in the presence of K₂CO₃ or Li₂CO₃/TMEDA as mediators. 2-Fluoro- and 3-phosphorus-containing 4-Me, 4-CF₃ or 4-Ph quinolines are obtained in good to excellent yields. The influence of substituents in the aromatic ketone, the XCF₂-group in the alkyne as well as mediators and the reaction medium on the reactivity and specificity of the reaction is also investigated.     

Oxidative Coupling of Thiols to Disulfides with Ti(IV) in the Presence of NaI under Air Atmosphere

Ti(IV) as TiCl₃(O₃SCF₃) and TiO(O₂CCF₃)₂ are used as efficient catalysts for oxidative coupling of aliphatic, aromatic and heteroaromatic thiols to their disulfides in the presence of NaI under air atmosphere.     

Solid-state reactions between alkali persulfates and oxides of corundum structure

The effects of three corundum structure oxides, α-Al₂O₃, α-Cr₂O₃, and α-Fe₂O₃, on the thermal decomposition of sodium and potassium peroxodisulfates (persulfates) under non-isothermal static air conditions and using various oxide/persulfate molar ratios, have been thermoanalytically investigated. Compounds such as Na₃Al(SO₄)₃, K₃Al(SO₄)₃, Cr₂(SO₄)₃, K₃Cr(SO₄₃, and Na₃Fe(SO₄)₃ are identified by X-ray diffractometry and conventional chemical analysis. The molar ratios as well as temperatures of the stoichiometric formation for these compounds have been established. At higher temperatures, α-Al₂O₃ acts as a promoter catalyst for the decomposition of pyrosulfate to sulfate, whereas α-Cr₂O₃ behaves as a retarder for the decomposition of persulfate. A eutectic mixture is formed between K₃Al(SO₄) and K₂SO₄ at 675°C. Also, K₃Fe(SO₄)₃ is identified as two crystalline phases.     

Exceedingly Facile Ph?X Activation (X=Cl,Br, I) with Ruthenium(II): Arresting Kinetics,Autocatalysis, and Mechanisms

[(Ph₃P)₃Ru(L)(H)₂] (where L=H₂ ( 1 ) in the presence of styrene, Ph₃P ( 3 ), and N₂ ( 4 )) cleave the Ph X bond (X=Cl, Br, I) at RT to give [(Ph₃P)₃RuH(X)] ( 2 ) and PhH. A combined experimental and DFT study points to [(Ph₃P)₃Ru(H)₂] as the reactive species generated upon spontaneous loss of L from 3 and 4 . The reaction of 3 with excess PhI displays striking kinetics which initially appears zeroth order in Ru. However mechanistic studies reveal that this is due to autocatalysis comprising two factors: 1) complex 2 , originating from the initial PhI activation with 3 , is roughly as reactive toward PhI as 3 itself; and 2) the Ph I bond cleavage with the just‐produced 2 gives rise to [(Ph₃P)₂RuI₂], which quickly comproportionates with the still‐present 3 to recover 2 . Both the initial and onward activation reactions involve PPh₃ dissociation, PhI coordination to Ru through I, rearrangement to a η²‐PhI intermediate, and Ph I oxidative addition.     

A Modified Water-Gas Shift Reaction. The Decomposition of Alkyl Formate in the Presence of Water Using a Ruthenium Carbonyl

Alkyl formates in the presence of water were rapidly decomposed to H₂, CO₂ and the corresponding alcohols using Ru₃(CO)₁₂ and KOAc as catalyst. Based on the hydrogen gas produced, a turnover rate as fast as 8446/h for ethyl formate at 140°C was observed. The catalyst system was also active for the decomposition of other alkyl formates. The rate of decomposition increased both with increasing amount of KOAc and with decreasing number of carbon atom in the alkyl group of the formate. In addition to Ru₃(CO)₁₂, several other transition metal complexes RuCl₃, RuCl₂(PPh₃)₃, Os₃(CO)₁₂, H₂Os₃(CO)₁₀, RhCl₃, and RhCl(PPh₃)₃, were active in the catalytic decomposition of alkyl formates, although their activities varied greatly. The Ru₃(CO)₁₂-KOAc system also catalyzed the reduction of nitrobenzene by HCOOEt-H₂O to aniline in EtOH and to a mixture of N-phenylformamide and N-methyl-N-phenylformamide in HCOOEt. Under coditions the same as for the hydrogenation of nitrobenzene, ethylene styrene and cyclohexenone were reduced to the corresponding alkanes, whereas 1-hexene and 1-octene were isomerized to the corresponding 2-alkene products.     

The Role of Ate Complexes in the Copper‐Mediated Trifluoromethylation of Alkynes

Trifluoromethylation reactions have recently received increased attention because of the beneficial effect of the trifluoromethyl group on the pharmacological properties of numerous substances. A common method to introduce the trifluoromethyl group employs the Ruppert–Prakash reagent, that is, Si(CH₃)₃CF₃, together with a copper(I) halide. We have applied this method to the trifluoromethylation of aromatic alkynes and used electrospray‐ionization mass spectrometry to investigate the mechanism of these reactions in tetrahydrofuran, dichloromethane, and acetonitrile as well as with and without added 1,10‐phenanthroline. In the absence of the alkyne component, the homoleptic ate complexes [Cu(CF₃)₂]^? and [Cu(CF₃)₄]^? were observed. In the presence of the alkynes RH, the heteroleptic complexes [Cu(CF₃)₃R]^? were detected as well. Upon gas‐phase fragmentation, these key intermediates released the cross‐coupling products R?CF₃ with perfect selectivity. Apparently, the [Cu(CF₃)₃R]^? complexes did not originate from homoleptic cuprate anions, but from unobservable neutral precursors. The present results moreover point to the involvement of oxygen as the oxidizing agent.     

Das Chloridnitrat PrCl2(NO3) · 5 H2O mit kationischen und anionischen Komplexen gemäß [PrCl2(H2O)6][PrCl2(NO3)2(H2O)4]

The Chloride Nitrate PrCl₂(NO₃) · 5 H₂O with Cationic and Anionic Complexes according to [PrCl₂(H₂O)₆][PrCl₂(NO₃)₂(H₂O)₄] Green single crystals of PrCl₂(NO₃) · 5 H₂O have been obtained from an aqueous solution of PrCl₃ and Pr(NO₃)₃. The crystal structure [monoclinic, P2/c, Z = 4, a = 1228.8(3), b = 648.4(1), c = 1266.0(4) pm, β = 91.91(3)°] contains cationic and anionic Pr³⁺ complexes according to [PrCl₂(H₂O)₆][PrCl₂(NO₃)₂(H₂O)₄]. Both nitrate groups of the anionic complex act as bidentate chelating ligands. Hydrogen bonds are observed with water molecules as donors and chlorine as well as oxygen atoms as acceptors.     

On the Brink of Decomposition: Controlled Oxidation of a Substituted Arsanylborane as a Way to Labile Group 13-15-16 Compounds

The reactivity of the organic-substituted arsanylborane tBuAsHBH₂NMe₃ ( 1 ) towards different elemental chalcogenes as well as organic oxidants such as O-NMe_3, Me₃Si−O−O-SiMe₃, MesCNO and cyclohexenesulfide is reported. By the reaction of 1 with grey selenium, the selenium oxidation product tBuAs(Se)HBH₂NMe₃ ( 2 ) was obtained. For the oxidation with sulfur, the two products tBuAs(S)HBH₂NMe₃ ( 3 a ) and tBuAs(S)SHBH₂NMe₃ ( 3 b ) could be isolated as oils. The structural characterization of As(tBuAs(S)SHBH₂NMe₃)₃ ( 4 ) as well as corresponding DFT computations allow insights into the decomposition behavior of 3 a and 3 b in solution. For the reaction of MesCNO with 1 , the formation of an unusual As−H activation product Mes-C(NOH)-AstBu-BH₂NMe₃ ( 5 ) is observed. In the reaction with Me₃N−O, the first isolatable oxo-arsanylboranes tBuAs(O)HBH₂NMe₃ ( 6 a ) and tBuAs(O)OHBH₂NMe₃ ( 6 b ) are obtained, with 6 b also being accessible via the controlled reaction of 1 with air.     

Kinetic Study of the Oxidative Addition Reaction between Methyl Iodide and [Rh(imino-β-diketonato)(CO)(PPh)3] Complexes,Utilizing UV–Vis,IR Spectrophotometry,NMR Spectroscopy and DFT Calculations

The oxidative addition of methyl iodide to [Rh(β-diketonato)(CO)(PPh)₃] complexes, as modal catalysts of the first step during the Monsanto process, are well-studied. The β-diketonato ligand is a bidentate (BID) ligand that bonds, through two O donor atoms (O,O-BID ligand), to rhodium. Imino-β-diketones are similar to β-diketones, though the donor atoms are N and O, referred to as an N,O-BID ligand. In this study, the oxidative addition of methyl iodide to [Rh(imino-β-diketonato)(CO)(PPh)₃] complexes, as observed on UV–Vis spectrophotometry, IR spectrophotometry and NMR spectrometry, are presented. Experimentally, one isomer of [Rh(CH₃COCHCNPhCH₃)(CO)(PPh₃)] and two isomers of [Rh(CH₃COCHCNHCH₃)(CO)(PPh₃)] are observed—in agreement with density functional theory (DFT) calculations. Experimentally the [Rh(CH₃COCHCNPhCH₃)(CO)(PPh₃)] + CH₃I reaction proceeds through one reaction step, with a rhodium(III)-alkyl as the final reaction product. However, the [Rh(CH₃COCHCNHCH₃)(CO)(PPh₃)] + CH₃I reaction proceeds through two reaction steps, with a rhodium(III)-acyl as the final reaction product. DFT calculations of all the possible reaction products and transition states agree with experimental findings. Due to the smaller electronegativity of N, compared to O, the oxidative addition reaction rate of CH₃I to the two [Rh(imino-β-diketonato)(CO)(PPh)₃] complexes of this study was 7–11 times faster than the oxidative addition reaction rate of CH₃I to [Rh(CH₃COCHCOCH₃)(CO)(PPh₃)].     

Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films

Two pseudohalide thiocyanate ions (SCN^?) have been used to replace two iodides in CH₃NH₃PbI₃, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH₃NH₃Pb(SCN)₂I perovskite films were shown to be superior to the conventional CH₃NH₃PbI₃ films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH₃NH₃PbI₃ films degraded in less than 1.5 hours. Solar cells based on CH₃NH₃Pb(SCN)₂I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH₃NH₃PbI₃ based cells fabricated in the same way.     

Exceedingly Facile PhX Activation (X=Cl,Br, I) with Ruthenium(II): Arresting Kinetics,Autocatalysis, and Mechanisms

[(Ph₃P)₃Ru(L)(H)₂] (where L=H₂ ( 1 ) in the presence of styrene, Ph₃P ( 3 ), and N₂ ( 4 )) cleave the Ph? X bond (X=Cl, Br, I) at RT to give [(Ph₃P)₃RuH(X)] ( 2 ) and PhH. A combined experimental and DFT study points to [(Ph₃P)₃Ru(H)₂] as the reactive species generated upon spontaneous loss of L from 3 and 4 . The reaction of 3 with excess PhI displays striking kinetics which initially appears zeroth order in Ru. However mechanistic studies reveal that this is due to autocatalysis comprising two factors: 1) complex 2 , originating from the initial PhI activation with 3 , is roughly as reactive toward PhI as 3 itself; and 2) the Ph? I bond cleavage with the just‐produced 2 gives rise to [(Ph₃P)₂RuI₂], which quickly comproportionates with the still‐present 3 to recover 2 . Both the initial and onward activation reactions involve PPh₃ dissociation, PhI coordination to Ru through I, rearrangement to a η²‐PhI intermediate, and Ph? I oxidative addition.     

DTA,TG studies of catalytic oxidation of carbon particles over M2 III O3 (MIII=Al,Cr, Fe,Ni)

Carbonizate as a model soot has been submitted to oxidation using Al₂O₃, Cr₂O₃, Ni₂O₃ and Fe₂O₃ as catalysts in the temperature range from RT up to 1000°C. The results obtained indicate that Fe₂O₃ is the most active catalyst in soot oxidation. However, all the catalysts examined are active in transformation of carbonizate components. It has been shown that DTA and TG methods can be used as fast methods testing the carbonizate oxidation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Novel CaCO3/g-C3N4 composites with enhanced charge separation and photocatalytic activity

A novel CaCO₃/graphitic carbon nitride (g-C₃N₄) photocatalyst was synthesized for the first time via a facile calcination method using CaCO₃ and melamine as precursors. The as-prepared samples were characterized using various techniques, such as scanning and transmission electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller analysis, as well as Fourier-transform infrared, X-ray photoelectron, photoluminescence, and UV–vis diffuse reflectance spectroscopy. The results of the experiments confirm the successful coupling of CaCO₃ to g-C₃N₄. The photocatalytic activity of the synthesized CaCO₃/g-C₃N₄ composites was evaluated by assessing their performance in the photocatalytic degradation of crystal violet (CV) in water under visible light irradiation. The analysis shows that CaCO₃/g-C₃N₄ exhibits higher photocatalytic activity towards CV degradation (76.0%) than pristine g-C₃N₄ (21.6%) and CaCO₃ (23.2%). Radical trapping and electron spin resonance experiments show that hydroxyl radicals (OH) and holes (h⁺) are the key reactive species in the photocatalytic process. The enhanced photocatalytic activity of the composite is mainly attributed to the efficient separation rate of electron-hole pairs achieved through the incorporation of CaCO₃.     

Concise and Additive-Free Click Reactions between Amines and CF3SO3CF3

Trifluoromethyl trifluoromethanesulfonate has proved to be an excellent reservoir of difluorophosgene and a promising click ligation for amines in the preparation of urea derivatives, heterocycles, and carbamoyl fluorides under metal- and additive-free conditions. The reactions are rapid, efficient, selective, and versatile, and can be performed in benign solvents, giving products in excellent yields with minimal efforts for purification. The characteristics of the reactions meet the requirements of a click reaction. The use of trifluoromethyl trifluoromethanesulfonate as a click reagent is advantageous over other “CO” sources (e.g., TsOCF₃, PhCO₂CF₃, CsOCF₃, AgOCF₃, and triphosgene) because this reagent is readily accessible; easy to scale up; and highly reactive, even under metal- and additive-free conditions. It is anticipated that CF₃SO₃CF₃ will be increasingly as important as SO₂F₂ as a click agent in future drug design and development.