共查询到19条相似文献,搜索用时 140 毫秒
1.
利用长周期光纤光栅具有较高的温度、折射率灵敏度,以及光纤布喇格光栅具有较高反射效率的特点,设计了一种基于光纤布啦格光栅滤波的级联长周期光纤光栅温度和折射率传感装置.利用光纤布喇格光栅的高反射率,将级联长周期光纤光栅干涉波峰的局部功率反射到功率计中,实现了温度和折射率的测量.基于信号叠加原理,对光纤布喇格光栅滤波的级联长周期光纤光栅温度和折射率传感方法的可行性进行了分析.将实际测得的功率计示数与温度以及折射率的变化进行二项式拟合,其确定系数分别为0.9990和0.9959,表明该传感方法可用于温度和折射率的精确测量.最后对该装置的稳定性做了一系列的测试,验证了该传感系统具有较高的稳定性. 相似文献
2.
3.
4.
5.
含耐高温涂覆层长周期光纤光栅的温度特性研究 总被引:1,自引:1,他引:0
利用逐点写入法在耐高温光纤中用红外飞秒激光直接写入了长周期光纤光栅,研究了光栅的高温温度特性,并做了理论分析.通过对含耐高温涂覆层的长周期光纤光栅进行20 ℃~300 ℃的温度传感实验,结果表明:在高温段光栅的谐振波长漂移量与温度之间仍能保持大的灵敏度(0.060 5 nm/℃)和好的线性度,且光纤耐高温涂覆层不受破坏,光纤耐高温涂覆在高温下不会出现碳化现象,光栅传感性能良好.实验证明该方法制作的光栅适合于长期在高温环境下使用,应用价值巨大. 相似文献
6.
7.
基于Bitaper-LPFG-Bitaper结构的全光纤Mach-Zehnder干涉仪的温度传感特性 总被引:1,自引:1,他引:0
提出并制作出一种基于锥体光纤-长周期光纤光栅-锥体光纤结构的全光纤Mach-Zehnder(M-Z)干涉仪传感器,并对其温度传感特性进行了研究.实验结果表明,固定光纤锥体和长周期光纤光栅的结构,仅改变两个光纤锥体之间的距离,对应不同的M-Z干涉谐振峰呈现出不同的温度传感特性:随着两个光纤锥体之间的距离增加,位于短波长处的谐振峰,传感器的温度灵敏度减小,而位于长波长处的谐振峰,传感器的温度灵敏度增加.当传感器长度为16.5 cm时,在1 680 nm附近的温度灵敏度达到0.102 06 nm/℃.实验结果对于锥体光纤-长周期光纤光栅组合型温度传感器的优化设计具有重要参考价值. 相似文献
8.
光纤布拉格光栅在通信和传感领域具有广泛的应用。利用光纤布拉格光栅中心波长的偏移,可以测量温度和应变等多种物理量,但必须解决光栅对温度和应变的交叉敏感问题。该文简要分析了光纤光栅作为传感器的基本原理及其优点,设计了利用参考光栅法分离温度影响以及利用掺铒光纤的自发发射放大特性分离温度影响的2种应变测量方法。最后,介绍了一种利用倾斜光纤光栅的主模和边模对布拉格光栅中心波长的偏移进行解调的方法,该方法成功地分离了温度对应变测量的影响。 相似文献
9.
10.
针对光纤光栅传感系统应用中面临的应变能力和可靠性不稳定的问题,研究并设计了一种基于自适应耦合切换和自调谐光纤光栅传感系统。首先,基于长周期和短周期光纤光栅耦合特性建立了自适应耦合器件及其切换算法,然后再分析耦合特性的基础上设计了支持自调谐功能的光纤光栅传感器及其调谐算法,最后给出了支持耦合自适应切换和耦合特性自调谐功能的光纤光栅传感系统。实验表明,在检测精度、抗干涉能力和应变能力等方面,所提方案表现出了明显优势。 相似文献
11.
长周期光纤光栅(long-period fiber grating,LPFG)是一种宽带的透射型无源光子器件,在光纤通信和光纤传感领域应用广泛.本文从折射率空间调制的角度,根据栅格周期长短、折射率调制深度和栅面法线取向三个特征参数,对LPFG进行了分类并分析了其不足,定义了新型长周期光纤光栅(novel long-period fiber grating,NLPFG)概念并指出了其研究意义;阐述了典型的LPFG写制新技术,建立了NLPFG模型和设计理论;提出了NLPFG正、反向设计流程,阐述了NLPFG典型设计方法;综述了近年来NLPFG的研制及典型应用,展望了NLPFG研究的发展趋势. 相似文献
12.
13.
基于双峰谐振效应的镀金属长周期光纤光栅液体浓度传感器 总被引:6,自引:2,他引:4
利用长周期光纤光栅(LPFG)中的双峰谐振效应,结合表面等离子体共振(SPR)传感器的高灵敏度,提出了一种新型镀金属光纤光栅液体浓度传感器.采用双包层结构模型和耦合模理论,分析r镀金属长周期光纤光栅双峰效应的谐振特性,环境折射率的传感特性以及金属膜厚对双峰LPFG灵敏度的影响.实验上制作了具有双峰效应的镀银膜长周期光纤... 相似文献
14.
15.
Based on coupled-mode theory of long-period fiber grating (LPFG), a theoretical analysis and simulations for the optimal design of a temperature-insensitive LPFG is presented in order to achieve an athermal condition for sensing the refractive index of the external medium. Effects of the variation of the cladding radius and grating period on the temperature sensitivity of the LPFG are discussed. Both of these parameters are found to be important to control the temperature sensitivity when the thermo-optic coefficients of core and cladding materials are of the same order. Other grating parameters are also optimized in order to achieve a good contrast of the grating period with resonance wavelength in the 1.5 μm region and to sense the external medium refractive index over a wide range. Variation of external medium refractive index from 1.0 to 1.45 results a red-shift in the LPFG resonance wavelength by 86 nm with its temperature sensitivity as low as 0.008 nm/°C over a temperature range of 0–80 °C for this optimally designed LPFG. 相似文献
16.
Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A novel method for designing chalcogenide long-period fiber grating (LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point (PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors. 相似文献
17.
18.
单长周期光栅迈克耳孙干涉仪特性研究 总被引:2,自引:0,他引:2
单长周期光栅迈克耳孙(Michelson)干涉仪是由尾纤端面蒸镀高反膜的单根长周期光纤光栅构成。入射光经长周期光栅后,部分被耦合到包层中传输。经过包层和纤芯传输的光信号经尾纤端面反射后,重新耦合回到长周期光栅中,在光栅区域形成干涉。通过理论计算分析了各种因素对其光谱响应的影响。从实验上得到了干涉光谱的谐振峰波长位移与光纤段温度变化成良好的线性关系,测得其温度系数为31.3pm/℃。表明这种结构可用于高温传感或作为波分复用滤波器。 相似文献
19.
为了提高长周期光纤光栅对环境介质折射率的传感灵敏度,提出一种长周期光纤光栅的周期和包层半径的结构优化.基于长周期光纤光栅的耦合模理论,分析了长周期光纤光栅的周期和包层半径的大小分别与环境介质折射率传感灵敏度的关系,讨论了长周期光纤光栅的周期和包层半径对折射率传感的影响以及控制光栅周期与包层半径对折射率传感的重要性.为使优化的长周期光纤光栅具有实用性,谐振波长设计在1.55 μm的常规波长范围,经过多次摸拟实验,提出最佳优化参量为:Λ=380 μm,rcl=17 μm,对环境介质折射率从1.26~1.38不同值的实验测试,折射率传感灵敏度达到0.000 12,长周期光纤光栅的结构优化获得理想的预期效果. 相似文献