Catalytic activity of Cu(II)–poly(vinyl alcohol) complex for decomposition of hydrogen peroxide

Decomposition of hydrogen peroxide was examined was examined by using Cu(II)–poly(vinyl alcohol) (PVA) as catalyst. The rates of decomposition were measured. Electronic spectra and infrared spectra of Cu(II)–PVA complex systems were determined at various stages of decomposition. Effect of addition of various amines to the Cu(II)–PVA system on catalytic action was considered. The relation between the initial rate and the initial concentration of hydrogen peroxide varied in accordance with the rate expression of Michaelis-Menten type. Cu(II)–PVA complex was found to have a large catalytic activity, while the polymeric PVA ligand and copper(II) ion exhibited less activity than Cu(II)–PVA complex. For hydrogen peroxide decomposition, Cu(II)–PVA complex showed catalytic activity when a stable complex of planar structure formed, while many other polymer complexes reported by other authors showed the catalytic activity when they were in unstable complex forms. An amine substituent has a critical influence on the rate of hydrogen peroxide decomposition. The mechanism in the first step of reaction for hydrogen peroxide decomposition is discussed.     

Modification and characterization of semi-crystalline poly(vinyl alcohol) with interpenetrating poly(acrylic acid) by UV radiation method for alkaline solid polymer electrolytes membrane

Semi-crystalline poly(vinyl alcohol) was modified by UV radiation with acrylic acid monomer to get interpenetrating poly(acrylic acid) modified poly(vinyl alcohol), PVAAA, membrane. The stability of various PVAAA membranes in water, 2 M CH₃OH, 2 M H₂SO₄, and 40 wt% KOH aqueous media were evaluated. It was found that the stability of PVAAA membrane is stable in 40 wt% KOH solution. The PVAAA membranes were characterized by differential scanning calorimetry, X-ray diffraction, and thermogravimetry analysis. These results show that (1) the crystallinity in PVAAA decreased with increasing the content of poly(acrylic acid) in the PVAAA membranes. (2) The melting point of the PVAAA membrane is reduced with increasing the content of poly(acrylic acid) in the membrane. (3) Three stages of thermal degradation were found for pure PVA. Compared to pure PVA, the temperature of thermal degradation increased for the PVAAA membrane. The various PVAAA membranes were immersed in KOH solution to form polymer electrolyte membranes, PVAAA-KOH, and their performances for alkaline solid polymer electrolyte were conducted. At room temperature, the ionic conductivity increased from 0.044 to 0.312 S/cm. The result was due to the formation of interpenetrating polymer chain of poly(acrylic acid) in the PVAAA membrane and resulting in the increase of charge carriers in the PVA polymer matrix. Compared to the data reported for different membranes by other studies, our PVAAA membrane are highly ionic conducting alkaline solid polymer electrolytes membranes.     

Selective determination of hydroquinone in the presence of catechol based on over-oxidized poly(hydroquinone)

Selective determination of hydroquinone (HQ) in the presence of catechol (CC) was developed at an over-oxidized poly(hydroquinone) (PHQ) electrode. The electrochemical polymerization of HQ was carried out by potentiostatic method on a glassy carbon electrode. The resulting PHQ was over-oxidized in 0.10?mol/L NaOH solution and thus poly(p-benzoquinone) was obtained. Two dihydroxybenzene isomers, HQ and CC, show different voltammetric behavior at the over-oxidized PHQ electrode. The peak current of HQ is much larger than that of CC with the same concentration, which is attributed to the different position of the hydroxyl groups in benzene ring of the two isomers. The results from electrochemical impedance spectroscopy also demonstrates that the over-oxidized PHQ electrode has a stronger affinity for HQ over CC.     

Transition metal polymeric chelates: Spectral, magnetic, thermal behaviour of polymeric chelates of poly(resacetophenone diyl ethylene)s with Ni(II), Cu(II), Mn(II), Zn(II) and Co(II)

Polymeric chelates of the type [ML₂]_n where M = Ni(II), Cu(II), Zn(II) or Co(II), L = poly(resacetophenone diyl ethylene)s, andn= degree of polymerization, have been synthesized. Their structures have been elucidated on the basis of analytical, magnetic, electronic and IR spectral studies. Electronic spectra in conjunction with magnetic moments are in accord with an octahedral environment around the central metal ion in all polymeric chelates except Cu(II) and Zn(II) polymeric chelates which have been shown to possess square planar and tetrahedral geometries, respectively. IR spectral studies further suggest that the metal ions are coordinated through the oxygens of the carbonyl and the phenolic hydroxyl groups. All the chelates are paramagnetic except Zn(II), which is found to be diamagnetic.     

Micellar chromatographic separation of vanadium(V) chelate with 2-(2-thiazolylazo)-5-dimethylaminophenol

Summary In reversed phase—high performance liquid chromatography for metal chelates with 2-(2-thiazolylazo)-5-dimethylaminophenol, an aqueous non-ionic surfactant solution is used as a mobile phase. Among V(V), Fe(III), Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Mn(II), and Al(III), only the V(V) chelate gave a resolved peak by using 0.8% w/w poly(oxyethylene)_n-4-nonylphenyl ether (n=20) solution buffered at pH 3.8. V(V) can be selectively separated and sensitively determined.     

Relaxations in poly(vinyl alcohol) and in poly(vinyl acetate) detected by fluorescence emission of 4-aminophthalimide and prodan

Steady-state and time-resolved emission spectroscopy (TRES) of the medium-sensitive probes 4-aminophthalimide (4-AP) and 6-propionyl-2-(dimethylamino)naphthalene (Prodan) were performed at 77 and 298 K in vacuum-sealed thin films of poly(vinyl alcohol) (PVA) and poly(vinyl acetate) (PVAc). The two probes show similar red-edge effect in steady state emission and a red shift with time in TRES in PVA. In PVAc the red shifts are much smaller and the spectral shift for 4-AP is slower. 4-AP locates in highly polar environments in PVA, where H-bond interaction with the polymer is important. Prodan locates in less polar environments, as evidenced by the position of the emission maximum with respect to reference solvents. Consequently, the observed monoexponential spectral red shift with time of 4-AP in PVA and in PVAc is attributed to relaxation of the interaction of the probe with the hydroxy and acetate moieties, respectively. The more intense interaction of the lighter -OH moiety with the probes explains the greater and faster spectral shift observed in PVA compared to PVAc. The lifetime of this monoexponential spectral shift is independent of temperature in PVA and takes place with a highly negative activation entropy. This fact is attributed to a collective rearrangement of -OH groups to better interact with the excited state. This relaxation nevertheless does not account for the complete accommodation of the excited state. Prodan shows a linear variation of the spectral shift with time that can be explained by microheterogeneity. In PVA, the width at half-maximum of the emission spectra does not change with time for Prodan and it decays with a lifetime similar to the lifetime of the spectral shift in the case of 4-AP. The differences in the behavior of the probes are attributed to their different average location in the polymer matrix.     

Deliberately designed processes to physically tether the carboxyl groups of poly(pentacosadiynoic acid) to a poly(vinyl alcohol) glassy matrix to make poly(pentacosadiynoic acid) thermochromically reversible in the matrix

In this article, we demonstrate that by tethering carboxyl groups of poly(10,12-pentacosadiynoic acid) (PDA) to a poly(vinyl alcohol) (PVA) matrix, PDA, which is irreversible in its pure form, becomes reversible in the thermochromism. The tethering is realized by simple but deliberately designed processes: (1) Disperse the commercially available monomer 10,12-pentacosadiynoic acid (DA) nanocrystals in a PVA aqueous solution by the "NCCM" method invented in our laboratory. (2) Anneal and dry the mixture solution at a temperature higher than the melting point of pure DA crystal. (3) Polymerize the as-annealed DA/PVA blend films by UV irradiation. After the polymerization, PDA/PVA films with completely reversible thermochromism are obtained. The reversible PDA/PVA films can be easily dissolved in water, leading to water-dispersible nanoaggregates with the reversibility. Blends of PDA with other water-soluble polymers such as poly(ethylene oxide) (PEO), poly(acrylic acid) (PAA) and poly(allyamine) (PAM), were prepared respectively, by the same processes and under the same conditions. It is found that all these nanocomposites are irreversible or partially reversible in the thermochromism; either the relatively low glassy transition temperature of the polymer matrix (in the case of PEO) or the partial ionization nature of the polymer (in the cases of PAA and PAM) is responsible for the irreversibility or the partial reversibility.     

High-performance membranes for pervaporation II. Crosslinked poly(vinyl alcohol)–poly(acrylic acid) blends

Dense membranes made by crosslinking of poly(vinyl alcohol) (PVA) with poly(acrylic acid) (PAA) were prepared and tested in pervaporation and differential permeation of water–alcohol mixtures. Instead of a decrease of permeation flux as generally observed with most crosslinking agents, an increase in the permeability was observed with PAA crosslinked membranes at low PAA contents. The permeation flux increases with PAA contents in the polymer with no selectivity reduction for membranes containing less than 15 wt. % PAA. The membranes show good performances to water–2-propanol and water–ethanol mixtures, i.e. high fluxes and high selectivities to pure water. The membranes were stable and highly permeable to water. The enhancement of the permeability of PVA can be explained by a reduced crystallinity and an improved diffusivity due to the presence of PAA.     

Removal of heavy metal ions from aqueous solutions by filtration with a novel complexing membrane containing poly(ethyleneimine) in a poly(vinyl alcohol) matrix

A novel complexing membrane was used for the removal of heavy metal ions such as Pb(II), Cd(II) and Cu(II) from aqueous solutions. The membrane consists in a semi-interpenetrating polymer network of crosslinked poly(vinyl alcohol) as the matrix and poly(ethyleneimine) as the complexing polymer. The absorption reactions followed pseudo-first-order kinetics with similar rate constants for the three cations. A model is proposed for the absorption–desorption process in order to rationalize the data obtained for the retention ratio and the retention efficiency ratio. The corresponding equilibrium constants were determined for the three metal ions, showing that the affinity order of the membrane is Pb > Cu > Cd. This sequence is consistent with the order of maximum uptake of the ions per gram of membrane: 0.59, 0.47 and 0.33 mmol g⁻¹, respectively. On the other hand, the uptake order is different on a mass basis: 123, 30 and 37 mg g⁻¹, respectively. Regeneration of the membrane and metal recovery were studied with HCl and HNO₃ at different concentrations. Filtration of solutions of each metal ion showed large elimination ratios (96–99.5%) with a retention sequence Cd > Cu > Pb. The membrane remained efficient until complete saturation of its sites. Moreover, Cu retention is larger than expected, indicating possible additional chelation by the PVA matrix. Better retention ratios were observed when the concentration of the feed solution was kept constant. Filtration of a mixture of the three cations (all at 100 ppm concentration) resulted in the same retention sequence, but the elimination ratios were smaller and Pb was eventually displaced by Cu and Cd that were present in larger molar concentrations.     

Fully-biodegradable poly(3-hydroxybutyrate)/poly(vinyl alcohol) blend films with compositional gradient

Fully-biodegradable bacterial poly(3-hydroxybutyrate) (PHB)/chemosynthetic poly(vinyl alcohol) (PVA) blend films with compositional gradient from one surface to the other surface of the films were prepared by a dissolution-diffusion technique. Three kinds of PVA samples, high- and low-molecular weight atactic PVA and highly syndiotactic PVA (s-PVA), were used in order to investigate the effects of molecular weight and tactic structure on the generation of compositional gradient. The solution of PHB in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), which is also a good solvent for PVA, was cast on the PVA film and then the solvent HFIP was evaporated. By selecting the optimum volume of solvent and the evaporation rate, the PHB/PVA blend film with compositional gradient was obtained. The formation of compositional gradient was confirmed by FT-IR microscopy and ATR-FT-IR analysis. The 50%/50% PHB/s-PVA blend film with a nearly ideal compositional gradient, that is, the composition of PHB (or PVA) in the film changing gradually from 100% at one surface to 0% at the other surface of the film was obtained by casting PHB/HFIP solution on to the s-PVA film. Positional dependence of the absorbance of C==O and OH stretching bands along the film thickness direction for the PHB/S-PVA cast films.     

Cu(0) nanoclusters derived from poly(propylene imine) dendrimer complexes of Cu(II).

A family of diaminobutane core, poly(propylene imine) dendrimers coordinated to Cu(II), DAB-Am(n)-Cu(II)x (n = 4, 8, 16, 32, 64, x = n/2), was studied by means of extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) spectroscopies. The geometry of the dipropylene triamine (dpt)-Cu(II) end-group complexes for all dendrimer generations is reported for the first time and is found to be that of a square-based pyramid with each Cu ion bound to three nitrogen atoms (Cu-N distance approximately 2.03 A) of the dpt end group of the dendrimer. An oxygen atom residing 1.96 A from the Cu ion also occupies the equatorial plane, and the pyramid is completed by an axial oxygen at approximately 2.65 A. In addition, we report for the first time that reduction of the Cu(II)-dendrimer complexes with NaBH4 yields DAB-Am(n)-Cu(0)(cluster) species. Transmission electron microscopy (TEM) studies of the reduced species demonstrate that there is a systematic decrease in the size of the generated Cu clusters with increasing dendrimer generation. Additionally, it was found that the size of the nanoclusters is a function of the n/x ratio of the DAB-Am(n)-Cu(II)x precursor, with highly monodisperse, extremely small nanoclusters (r(cluster) = 8.0 +/- 1.6 A) obtained with n = 64 and x = 16. EXAFS and XANES measurements on the reduced DAB-Am(n)-Cu(0)(cluster) corroborate the TEM data, and provide additional information on the possible encapsulation of the Cu nanoclusters by the dendrimers.     

Miscibility and hydrogen-bonding interactions in biodegradable polymer blends of poly(3-hydroxybutyrate) and a partially hydrolyzed poly(vinyl alcohol)

Miscibility and hydrogen-bonding interactions, as well as the morphological properties, of biodegradable polymer blends of poly(3-hydroxybutyrate) (PHB) and a 80% hydrolyzed poly(vinyl alcohol) (PVA80) were studied using Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). It was found that PHB is miscible with PVA80 in the amorphous phase over the whole composition range. PVA80 or PHB assumes the amorphous state when its content in the blend is lower than 30 or 20 wt %, respectively. Due to the heavy overlapping of C=O stretching bands from both PVA80 and PHB and the nonmeasurable peak shift in the OH stretching band region, hydrogen-bonding interactions between the OH group of PVA80 and the C=O group of PHB were not detectable at room temperature, but were observed at a higher temperature of 180 degrees C. This is because hydrogen-bonding interactions are promoted above the melting points of these two crystalline polymers, by increasing the mixing entropy and reducing the Deltachi effect. Blending PHB with PVA80 does not have a significant effect on the OH groups of PVA80 that are hydrogen bonded with each other. Instead, the C=O groups of PHB dispossess some of the OH groups that are hydrogen bonded to the C=O groups of PVA80, which gives rise to the miscibility between PVA80 and PHB in the amorphous phase.     

Spectrophotometric Studies of Nickel(II) and Copper(II) Chelates of p-(2-Hydroxy-1-Naphthylazo)-Benzenesulphonate

The ionization constant of p-(2-hydroxy-1-naphthylazo)benzene-sulphonate (Orange II) and the formation constants of the metal chelates of this reagent with Ni(II) and Cu(II) have been determined spectrophotometrically in aqueous solution at 25° and at an ionic strength of 0.10M. The ionization constant of orange II was found to be pK_a=10.95. Formation of orange II chelates with Ni(II) and Cu(II) was pH dependent, and the optimum pH range of the Ni(II) Chelate was at pH 9.2-9.4, and Cu(II) chelate at 9.5-9.7, respectively. The mole ratio of orange II to both of metal ions was found to be 2 to 1 stoichiometry. The formation constants (logK) of the Ni(II) and Cu(II) chelates were 12.50 and 16.11, respectively. The molar extinction coefficients and the photometric sensitivities of these chelates were determined.     

Stabilization of electrospun poly(vinyl alcohol) nanofibrous mats in aqueous solutions

<正>The stability ofpoly(vinyl alcohol)(PVA) nanofibrous mats in water media was improved by post-electrospinning treatments.Bifunctional glutaraldehyde(GA) in methanol was used as a crosslinking agent to stabilize PVA nanofiber,but fiber twinning was observed frequently,and the highly porous structure of PVA nanofibrous mats was destroyed when the crosslinked fiber was soaked in water.To overcome this shortcoming,chitosan(CS) was introduced into the PVA spinning solution to prepare PVA/CS composite nanofibers.Their treatment in GA/methanol solution could retain the fiber morphology of PVA/CS nanofibers and porous structure of PVA/CS nanofibrous mats even if they were soaked in aqueous solutions for 1 month.Scanning electron microscopy(SEM),X-ray diffraction(XRD),thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC) were applied to characterize the physicochemical structure and thermal properties of PVA nanofibers.It was found that the water resistance of PVA nanofibrous mats was enhanced because of the improvement of the degree of crosslinking and crystallinity in the electrospun PVA fibers after soaking in GA/methanol solution.     

Crosslinking of poly(vinyl alcohol) using functionalized gold nanoparticles

We report on the preparation of a new class of polymer hydrogels obtained through the chemical crosslinking reaction of poly(vinyl alcohol) (PVA) and functionalized gold nanoparticles. Carboxylic group functionalized gold nanoparticles were synthesized, dispersed in a PVA matrix and allow to react with the hydroxyl groups of PVA at high temperature. FT-IR and swelling experiments carried out on the cross-linked samples confirmed that the crosslinking reaction took place. This is the first time, to our knowledge, that functionalized nanoparticles are used as chemical crosslinking agents.     

Propeller-like multicomponent microstructures: Self-assemblies of nanoparticles of poly(vinyl alcohol)-coated Ag and/or Cu2O

Novel propeller-like multicomponent microstructures, which are actually self-assemblies of nanoparticles of poly(vinyl alcohol) (PVA)-coated Ag and/or Cu2O, were synthesized in aqueous solution of amphiphilic polyvinylacetone (PVKA) (ketalization degree D(H) = 0.549), via one-step in situ reduction of Ag+ and Cu2+ under gamma-ray irradiation, utilizing the low hydrolysis rate of PVKA in the dilute acidic solution. Herein, PVA chains are obtained from hydrolyzed PVKA. The reaction mechanism and the formation mechanism are proposed. The room temperature photoluminescence spectrum has also been applied to explore the optical property.     

Polymer-Metal Complexes: Synthesis and Characterization of Poly-(2-Hydroxy-4-acryloxyacetophenone-semicarbazone) Metal Complexes

Abstract

2-Hydroxy-4-acryloxyacetophenone (HAAP) was synthesized and polymerized in 2-butanone using benzoyl peroxide as initiator at 65 °CC. Poly(2-hydroxy-4-acryloxyacetophenone-semicarbazone) (HAAPS) was prepared from poly(HAAP) and semicarbazide hydrochloride and was characterized by IR and NMR spectral studies. The molecular weights of the polymer was determined by gel permeation chromatography. Cu(II) and Ni(II) chelates of poly(HAAPS) were synthesized. Thermogravimetric analysis of the polychelates have been carried out. Elemental analysis of the poly chelates suggest a metal to ligand ratio as 1:2. The polychelates were also characterized by infrared, electronic spectral studies, magnetic, and conductivity measurements.     

Compatibility of poly(ethylene oxide)–poly(vinyl acetate) blends

The compatibility of poly(ethylene oxide)–poly(vinyl acetate) (PEO-PVA) blends was examined at five compositions covering the complete range. Samples were prepared by coprecipitation and solution casting. Dynamic mechanical properties were studied at 110 Hz between ?120 and 65°C for dry, quenched, and annealed samples. The study also included tensile testing at 25°C, examination of blend morphology, and DSC measurements at elevated temperatures. Optical microscopy revealed that crystallization of PEO proceeds essentially unhindered at up to 25% poly(vinyl acetate) content by weight. Higher levels of this component drastically reduce spherulite size, and at the highest PVA compositions there was no evidence of crystallization. Thermomechanical spectra of quenched and annealed samples indicate limited mixing of the two components except for the higher (>75%) PVA compositions. Tensile properties show a mutual reinforcement at 10-25% PVA content due to possible polymer segment association. The melting-point depression of PEO is significant above 25% PVA and has been attributed to morphological changes of the PEO crystalline phase.     

Structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SA) blend films

The structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SF) blend films were analyzed by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, x-ray diffractometry, and scanning (SEM) and transmission (TEM) electron microscopy. DSC curves of PVA/SF blend films showed a major endothermic peak at 220°C, along with a peak at 280°C. These endotherms were assigned to the thermal decomposition of the ordered PVA elements and to the thermal degradation of silk fibroin, respectively. The PVA/SF blends behaved in a manner intermediate to the pure components, as suggested by both contraction expansion and sample weight retention properties recorded by TMA and TGA measurements. The IR absorption spectra of the blends were identified as purely a composite of the absorption bands characteristic of both PVA and SF pure polymers. The X-ray diffraction patterns of PVA/SF blends showed overlapping spacing due to PVA and SF. A dispersed phase formed by spherical particles of 3–7 μm diameter was observed by SEM and TEM. All these findings suggest that PVA and SF are incompatible. © 1994 John Wiley & Sons, Inc.     

Association behavior of a nitrilotriacetic-acid-modified dye in a poly(vinyl alcohol) film containing Ni(II)-adsorbed gold nanoparticles.

The association behavior of the dyes 5(6)-carboxyfluorescein and nitrilotriacetic acid (NTA)-modified 5(6)-carboxyfluorescein (F-NTA) in a poly(vinyl alcohol) (PVA) film and in a PVA film containing metal nanoparticles is investigated. Well-dispersed gold nanoparticles (AuNps) and Ni(II)-adsorbed AuNps are formed in the PVA film using in situ photochemical fabrication method. 5(6)-carboxyfluorescein and F-NTA are doped into the films. The F-NTA forms an H-aggregate in the PVA film containing Ni(II)-adsorbed AuNps. It is suggested that the interaction between NTA and Ni(II) adsorbed on the AuNps promotes the formation of the H-aggregate.