Surface plasmon spectroscopy of gold-poly-N-isopropylacrylamide core-shell particles

Highly uniform, core-shell microgels consisting of single gold nanoparticle cores and cross-linked poly-N-isopropylacrylamide (PNIPAM) shells were prepared by a novel, versatile protocol. The synthetic pathway allows control over the polymer shell thickness and its swelling behavior. The core-shell structure was investigated by electron microscopy and atomic force microscopy, whereas the swelling behavior of the shell was studied by means of dynamic light scattering and UV-vis spectroscopy. Furthermore, the latter method was used to investigate the optical properties of the hybrid particles. By modeling the scattering contribution from the PNIPAM shells, the absorption spectra of the gold nanoparticle cores could be recovered. This allows the particle concentration to be determined, and this in turn permits the calculation of the molar mass of the hybrid particles as well as the refractive index of the shells.     

Amphiphilic Cyanine–Platinum Conjugates as Fluorescent Nanodrugs

Two fluorescent nanomedicines based on small molecular cyanine–platinum conjugates have been prepared via a nanoprecipitation method and characterized by transmission electron microscopy (TEM) as well as dynamic light scattering (DLS). The conjugates exhibited an enhanced fluorescence in their nanoparticle formulation compared to that in solution. The nanomedicines could be endocytosed by cancer cells as revealed by confocal laser scanning microscopy (CLSM) and showed high cellular proliferation inhibition. Fluorescent platinum nanomedicines prepared directly from small molecules could be an alternative strategy for developing new drugs with simultaneous cellular imaging and cancer therapy functions.     

‘Nano-impacts’: An Electrochemical Technique for Nanoparticle Sizing in Optically Opaque Solutions

Typical laser-dependent methods such as nanoparticle tracking analysis (NTA) and dynamic light scattering (DLS) are not able to detect nanoparticles in an optically opaque medium due to scattering or absorption of light. Here, the electrochemical technique of ‘nano-impacts’ was used to detect nanoparticles in solution in the presence of high levels of alumina particulates causing a milky white suspension. Using the ‘nano-impacts’ method, silver nanoparticles were successfully detected and sized in the model opaque medium. The results obtained compared well with those using transmission electron microscopy (TEM), an ex situ method for nanoparticle size determination. The ability to use the ‘nano-impacts’ method in media unmeasurable to competitor techniques confers a significant advantage on the electrochemical approach.     

Cyclodextrin/polyethylenimine-based supramolecular nanoparticles for loading and sustained release of ATP

A new supramolecular nanoparticle PEI/SCD was successfully constructed, showing the loading/sustained release abilities towards ATP.     

石英纳米通道单磷脂囊泡的电阻-脉冲分析方法

本文报告了用于检测单囊泡及其粒径分析的石英纳米通道电阻-脉冲分析方法. 采用圆柱形石英纳米通道可检测粒径为100~300 nm的单磷脂囊泡和直径为170~400 nm的聚苯乙烯纳米颗粒. 单囊泡和纳米颗粒的迁移可通过检测各自产生的方波电流脉冲信号, 并由此确定颗粒尺寸. 结果表明,采用石英纳米通道电阻-脉冲分析方法得到的颗粒/囊泡粒径与采用动态光散射法和扫描电子显微法得到的结果完全一致. 这种基于电子的分析方法具有快速简单的特点,所用的自制微传感器廉价耐用. 石英通道的应用还可与其它分析方法如电流分析法和荧光显微法联用,以获得生物囊泡及人工囊泡更完全的信息.     

A facile one-pot method to fabricate gold nanoparticle chains with dextran

A biocompatible water-soluble dextran has been used for controllable one-dimensional assembly of gold nanoparticles via a one-pot method.Long gold nanoparticle chains with good dispersion in water could be easily obtained after adding dextran into the mixture of HAuCl 4 and sodium citrate.The measurements of scanning electron microscopy(SEM) and dynamic light scattering(DLS) confirmed the formation of gold nanoparticle chains.The morphology and dispersion properties of gold nanoparticle chains could be tuned by adjustment of the reagent ratio,stirring speed,and reaction time.     

Modern Methods for Studying Polymer Complexes in Aqueous and Organic Solutions

This review summarizes published data concerning modern physicochemical methods used to study complexation processes of polymers in solutions. Some of them—dynamic light scattering, nanoparticle tracking analysis, transmission electron microscopy, cryotransmission electron microscopy, atomic force microscopy, small-angle neutron scattering, analytical-velocity sedimentation, and luminescence methods—make it possible to gain insight into the structure of polymer complexes, while the other methods, such as isothermal titration calorimetry and surface plasmon resonance, provide an opportunity to assess the intensity of specific interactions between complex components.     

Synthesis of micrometer to nanometer CaCO3 particles via mass restriction method in an emulsion liquid membrane process

A mass restriction principle has been applied for the synthesis of precipitated calcium carbonate (PCC) with particle sizes from nanometer to micrometer via a simple emulsion liquid membrane (ELM) process. The internal liquid droplets in ELM were designed as individual microreactors in which the concentration and the total mass of the reaction chemicals were carefully mediated. Instrumental analysis, such as Fourier transform infrared (FTIR), wide X-ray diffraction (WXRD), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis, confirmed a predominant calcite form of the final product via this process. The comparison of calculated particle sizes with that obtained from experimental measurements using dynamic light scattering (DLS), transmission electron microscopy (TEM) and SEM analysis suggested that approximately one PCC particle was formed in one water-in-oil (w/o) droplet.     

Structure and activity assay of nanozymes prepared by the coimmobilization of practically useful enzymes and hydrophilic block copolymers on gold nanoparticles

Enzyme/polymer/gold nanoparticle hybrids, called "nanozymes", were prepared and structurally analyzed by dynamic light scattering (DLS), ultraviolet-visible spectroscopy, and zeta-potential and transmission electron microscopy (TEM) measurements, which showed that the nanozyme particles were mainly composed of a single gold nanoparticle, on whose surface the enzyme and polymer were coimmobilized. This kind of structure resulted in the high dispersion stability of the nanozyme under various conditions, accompanied by improved thermal stability of the enzyme.     

Surface active properties of N-(2-Aminoethyl)-3-aminopropyltetrasiloxane lactobionamide and aggregation behavior in aqueous solution

The aggregation behavior of tetrasiloxane-lactobionamide (Si4N2-LA) in aqueous solution has been characterized by dynamic light scattering (DLS), negative-stained transmission electron microscopy (TEM) and X-ray Diffraction methods. Compared with the micellar sizes 7.0 nm of n-dodecyllactobionamide (C12Glu2), the Si4N2-LA molecule can self-assemble into spherical vesicle with diameters in the range from 60 to 300 nm.     

Stabilization of silver nanoparticles with copolymers of maleic acid

Silver nanoparticles are obtained by reducing AgNO₃ with sodium borohydride in an aqueous solution in the presence of maleic acid copolymers with ethylene, N-vinylpyrrolidone, or styrene, as well as their octadecylamide group-containing hydrophobized derivatives, as dispersants. The influence of the structural features of the dicarboxylic acid copolymers on the silver nanoparticle formation process and the conditions for producing sols containing spherical nanoparticles with sizes of 1.5–3.5 nm (according to the data of transmission electron microscopy) are determined. It is shown that, at the equimolar copolymer/silver cation ratio, the morphology of resulting silver nanoparticles weakly depends on the nature of comonomers of maleic acid and the presence of hydrophobic fragments, which play an auxiliary role in the stabilization of dispersions of nanoparticles by increasing their stability with respect to ionic strength and oxidation. Evolution of the particle sizes in the system is monitored beginning with copolymer solutions to silver sols by the methods of light scattering, transmission electron microscopy, and atomic force microscopy. According to the light scattering data, copolymers and their complexes with silver ions in solutions are partly aggregated at concentrations corresponding to the conditions of nanosilver synthesis. Silver sols are shown to contain stabilized nanoparticles, which represent core-polyelectrolyte corona-type micelles and micellar clusters with polyelectrolyte coronas.     

Microwave-hydrothermal synthesis of stable nanocrystalline ceria sols for biomedical uses

A new microwave-hydrothermal process has been developed for preparing stable aqueous sols of nanocrystalline ceria. Transmission electron microscopy, UV-Vis spectroscopy, and dynamic light scattering shows that CeO₂ nanoparticle size remains unchanged during hydrothermal treatments. Sodium adenosine triphosphate and sodium citrate are proposed for additional stabilization of the sols.     

Preparation of sterically stabilized gold nanoparticles for plasmonic applications

Plasmonic nanoparticles such as those of gold or silver have been recently investigated as a possible way to improve light absorption in thin film solar cells. Here, a simple method for the preparation of spherical plasmonic gold nanoparticles in the form of a colloidal solution is presented. The nanoparticle diameter is controlled in the range from several nm to tens of nm depending on the synthesis parameters with the size dispersion down to 14 %. The synthesis is based on thermal decomposition and reduction of the chloroauric acid in the presence of a stabilizing capping agent (surfactant) that is very slowly injected into the hot solvent. The surfactant prevents uncontrolled nanoparticle aggregation during the growth process. The nanoparticle size and shape depend on the type of the stabilizing agent. Surfactants with different lengths of the hydrocarbon chains such as Z-octa-9-decenylamine (oleylamine) with AgNO₃ and polyvinylpyrrolidone with AgNO₃ were used for the steric stabilization. Hydrodynamic diameter of the gold nanoparticles in the colloidal solution was determined by dynamic light scattering while the size of the nanoparticle metallic core was found by small-angle X-ray scattering. The UV-VIS-NIR spectrophotometer measurements revealed a plasmon resonance absorption in the 500–600 nm range. Self-assembled nanoparticle arrays on a silicon substrate were prepared by drop casting followed by spontaneous evaporation of the solvent and by a modified Langmuir-Blodgett deposition. The degree of perfection of the self-assembled arrays was analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering. Homogeneous close-packed hexagonal ordering of the nanoparticles stretching over large areas was evidenced. These results document the viability of the proposed nanoparticle synthesis for the preparation of high-quality plasmonic templates for thin film solar cells with enhanced power conversion efficiency, surface enhanced Raman scattering, and other applications.     

Formation of ordered arrays of oriented polyaniline nanoparticle nanorods

We report the preparation of ordered polyaniline (PANI) nanorod arrays in an aqueous medium. The oriented PANI nanorods (80-400 nm in diameter and 8-15 mum in length) were synthesized in the presence of hydrophilic Allura Red AC (ARAC) as the structure-directing agent and ammonium persulfate as an oxidant in HCl solution. The morphologies of the oriented PANI nanoparticle nanorods were confirmed by scanning electron microscopy (SEM) and transmission electron microscopy images, and the effect of reaction conditions on the morphology of PANI nanostructures was also studied. On the basis of the result obtained from small-angle X-ray scattering, we propose that rodlike micelle arrays of ARAC-aniline are responsible for directing the formation of oriented PANI nanoparticle nanorods. SEM images and the data analysis of static and dynamic light scattering give supportive evidence to the formation of the PANI nanoparticle nanorods by an elongation process. The chemical and electronic structures of the PANI nanorods were also studied by Fourier transform IR and UV-vis spectrometries, respectively.     

One-pot tuning of Au nucleation and growth: from nanoclusters to nanoparticles

We describe a simple and effective method to obtain colloidal surface-functionalized Au nanoparticles. The method is primarily based on irradiation of a gold solution with high-flux X-rays from a synchrotron source in the presence of 11-mercaptoundecanoic acid (MUA). Extensive tests of the products demonstrated high colloidal density as well as excellent stability, shelf life, and biocompatibility. Specific tests with X-ray diffraction, UV-visible spectrometry, visible microscopy, Fourier transform infrared spectroscopy, dark-field visible-light scattering microscopy, and transmission electron microscopy demonstrated that MUA, being an effective surfactant, not only allows tunable size control of the nanoparticles, but also facilitates functionalization. The nanoparticle sizes were 6.45 ± 1.58, 1.83 ± 1.21, 1.52 ± 0.37 and 1.18 ± 0.26 nm with no MUA and with MUA-to-Au ratios of 1:2, 1:1, and 3:1. The MUA additionally enabled functionalization with l-glycine. We thus demonstrated flexibility in controlling the nanoparticle size over a large range with narrow size distribution.     

Polyelectrolyte complex nanoparticles from chitosan and poly(acrylic acid) and Polystyrene‐block‐poly(acrylic acid)

Interpolymer polyelectrolyte complexes of chitosan (CS) with poly(acrylic acid) homopolymers and polystyrene‐block‐poly(acrylic acid) diblock copolymers were prepared and characterized. The influence of the positive/negative charge balance (charge ratio), pH, and ionic strength were thoroughly studied by dynamic light scattering. The existence of a strong polyelectrolyte effect was also highlighted in this study. Domains of stability, in which nanoparticle sizes are smaller than 100 and 200 nm for complexes of CS with the homopolymer and copolymer, respectively, were identified and confirmed by scanning electron microscopy and atomic force microscopy. The charged nature of the surface of the nanoparticles was evidenced by Zeta potential measurements. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electrochemical Nanoparticle Sizing Via Nano-Impacts: How Large a Nanoparticle Can be Measured?

The field of nanoparticle (NP) sizing encompasses a wide array of techniques, with electron microscopy and dynamic light scattering (DLS) having become the established methods for NP quantification; however, these techniques are not always applicable. A new and rapidly developing method that addresses the limitations of these techniques is the electrochemical detection of NPs in solution. The ‘nano-impacts’ technique is an excellent and qualitative in situ method for nanoparticle characterization. Two complementary studies on silver and silver bromide nanoparticles (NPs) were used to assess the large radius limit of the nano-impact method for NP sizing. Noting that by definition a NP cannot be larger than 100 nm in diameter, we have shown that the method quantitatively sizes at the largest limit, the lower limit having been previously reported as ∼6 nm.¹     

Nanoparticles via H-aggregation of amphiphilic BODIPY dyes

We have synthesized wedge-shaped BODIPY dyes with hydrophilic chains and studied their aggregational behavior in THF-containing water by UV-vis and photoluminescence spectroscopies, transmission electron microscopy, and dynamic light scattering. One of these dyes showed an aggregate derived from H-dimers and forms a high density nanoparticle in THF-containing water solution.     

On the measurement of gold nanoparticle sizes by the dynamic light scattering method

The application of the dynamic light scattering (DLS) method for determining the size distribution of colloidal gold nanoparticles in a range of 1–100 nm is discussed. It is shown that rotational diffusion of nonspherical strongly scattering particles with sizes of larger than 30–40 nm results in the appearance of a false peak in a size range of about 5–10 nm. In this case, the uncritical application of the DLS method may yield particle volume or number size distributions different from those obtained by transmission electron microscopy. For weakly scattering particles with diameters of smaller that 20 nm, the DLS method demonstrates an additional peak of intensity distribution in the region of large sizes that is related to particle aggregates or byproduct particles rather than individual nanoparticles. Practical methods for solving the problem of false peaks are discussed. It is established that the width of the DLS distribution does not correspond to transmission electron microscopy data and is overestimated. The advantages and drawbacks of the methods are compared and it is noted that, at present, the DLS method is the only instrument suitable for nonperturbative and sensitive diagnostics of relatively slow aggregation processes with characteristic times on the order of 1 min. In particular, this method can be used to diagnose gold nanoparticle conjugate aggregation initiated by biospecific interactions on their surface.     

Experimental investigation of nanoparticle dispersion by beads milling with centrifugal bead separation

A new type of beads mill for dispersing nanoparticles into liquids has been developed. The bead mill utilizes centrifugation to separate beads from nanoparticle suspensions and allows for the use of small sized beads (i.e. 15-30 microm in diameter). The performance of the beads mill in dispersing a suspension of titanium dioxide nanoparticle with 15 nm primary particles was evaluated experimentally. Dynamic light scattering was used to measure titania particle size distributions over time during the milling process, and bead sizes in the 15-100 microm range were used. It was found that larger beads (50-100 microm) were not capable of fully dispersing nanoparticles, and particles reagglomerated after long milling times. Smaller beads (15-30 microm) were capable of dispersing nanoparticles, and a sharp peak around 15 nm in the titania size distribution was visible when smaller beads were used. Because nanoparticle collisions with smaller beads have lower impact energy, it was found by X-ray diffraction and transmission electron microscopy that changes in nanoparticle crystallinity and morphology are minimized when smaller beads are used. Furthermore, inductively-coupled plasma spectroscopy was used to determine the level of bead contamination in the nanoparticle suspension during milling, and it was found that smaller beads are less likely to fragment and contaminate nanoparticle suspensions. The new type of beads mill is capable of effectively dispersing nanoparticle suspensions and will be extremely useful in future nanoparticle research.