Ruthenium-catalyzed [2 + 2] cycloadditions between bicyclic alkenes and alkynyl halides

Ru-catalyzed [2 + 2] cycloadditions between norbornadiene and alkynyl halides were found to occur in moderate to good yields (32-89%). The presence of the halide moiety greatly enhances the reactivity of the alkyne component in the cycloaddition and can be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition. [reaction: see text]     

Ruthenium-catalyzed [2 + 2] cycloadditions of ynamides

Ruthenium-catalyzed [2 + 2] cycloadditions between norbornene and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions, giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). [reaction: see text]     

Ruthenium-catalyzed homo Diels-Alder [2 + 2 + 2] cycloadditions of alkynyl phosphonates with bicyclo[2.2.1]hepta-2,5-diene

Ruthenium-catalyzed homo Diels-Alder [2 + 2 + 2] cycloadditions between alkynyl phosphonates and bicyclo[2.2.1]hepta-2,5-diene were studied. The observed reactivity was found to be dependent on the presence of the phosphonate moiety. The Ru-catalyzed cycloaddition was compatible with a variety of aromatic and aliphatic substituted alkynyl phosphonates, providing the corresponding phosphonate substituted deltacyclenes in low to good yields (up to 88%).     

Ruthenium-catalyzed [2 + 2] cycloadditions of 2-substituted norbornenes

The studies of remote substituent effects in controlling regio- and stereoselectivities in chemical reactions provide important information in understanding long-range stereoelectronic effects. The effect of remote substituents on ruthenium-catalyzed [2 + 2] cycloadditions of 2-substituted norbornenes has been investigated. The cycloadditions occurred at room temperature in excellent yields, and regioselectivities of 1.2:1 to 7.5:1 were observed with various 2-substituted norbornenes.     

Ruthenium-catalyzed [2+2] cycloadditions of bicyclic alkenes and ynamides

Ruthenium-catalyzed [2+2] cycloadditions between bicyclic alkenes and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). Diastereoselective cycloaddition utilizing chiral cyclic ynamides were also examined and a low to moderate level of asymmetric induction was observed.     

Rhodium-catalyzed intramolecular [4 + 2] cycloadditions of alkynyl halides

[reaction: see text] Cationic rhodium(I)-catalyzed intramolecular [4 + 2] cycloadditions of diene-tethered alkynyl halides were found to occur in good yields (70-87%). The halide moiety is compatible with the cycloaddition reactions, and no oxidative insertion to the alkynyl halide was observed. The halogen-containing cycloadducts could be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition.     

Ruthenium-catalyzed [2+2] cycloadditions between C1-substituted 7-oxanorbornadienes and alkynes

Ruthenium-catalyzed [2+2] cycloadditions between C1-substituted 7-oxanorbornadienes and alkynes were investigated. Most of the cycloadditions occurred smoothly at 65 °C, giving the cyclobutene cycloadducts in moderate to good yields. The C1 substituent showed strong effect on the regioselectivity (up to 110:1) of the cycloadditions.     

Ruthenium-catalyzed [2+2] cycloadditions between substituted alkynes and norbornadiene: a theoretical study

Theoretical predictions have been made using density functional theory for the reaction paths of a series of substituted alkynes undergoing a ruthenium-catalyzed cycloaddition with norbornadiene. Substituents on the alkynes have been varied in order to probe electronic and steric effects and the role of an intramolecular hydrogen bond. Strong electron-withdrawing groups activate the alkyne and decrease the reaction barrier leading to an increased rate. Bulkier substituents are predicted to lead to higher barriers and slower rates. The hydroxyl group on the alkyne hydrogen bonds to the chlorine stabilizes the transition state and increases the reaction rate. Generally good agreement is found with the trends in recently reported experimental relative rates of reaction of substituted alkynes with norbornadiene.     

Ruthenium-catalyzed [2 + 2] cycloadditions between 7-substituted norbornadienes and alkynes: an experimental and theoretical study

The ruthenium-catalyzed [2 + 2] cycloadditions of 7-substituted norbornadienes with an alkyne have been investigated. The cycloadditions were found to be highly regio- and stereoselective, giving only the anti-exo cycloadducts as the single regio- and stereoisomers in good yields. The results on the relative rate of different 7-substituted norbornadienes in the Ru-catalyzed [2 + 2] cycloadditions with an alkyne indicated that the reactivity of the alkene component decreases dramatically as the alkene becomes more electron deficient. Ab initio computational studies on the ruthenium-catalyzed [2 + 2] cycloadditions provided important information about the geometries and the arrangements of the four different groups on the Ru in the initial Ru-alkene-alkyne pi-complex, 14, and in the metallacyclopentene 15. Based on our computational studies, we also found that the first carbon-carbon bond formed in the [2 + 2] cycloaddition is between the C(5) of the alkene and the C(b) (the acetylenic carbon attached to the ester group) of the alkyne 8. Our computational studies on the potential energy profiles of the cycloadditions showed that the activation energy relative to the reactants for the oxidative addition step is in the range of 9.3-9.8 kcal/mol. The activation energy relative to the metallacyclopentene for the reductive elimination step is much higher than for the oxidative addition step (in the range of 25.9-27.6 kcal/mol).     

Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Rhodium catalysed [2+2+2] cycloadditions of acetylenes

Wilkinson's catalyst RhCl(PPh₃)₃ is an effective catalyst (0.5 – 2 mole %) for the rapid intermolecular trimerisation of 1,6-heptadiynes with monoacetylenes under mild conditions.     

Frontier-orbital analyses of ketene [2+2] cycloadditions

Twelve kinds of ketene [2+2] cycloadditions have been investigated by ab initio calculations. They are composed of four ketenes (Y–HC=C=O, Y=H, NH₂, Cl, and CN) and three isoelectronic ketenophiles (ethylene, methylenimine, and formaldehyde). All the transition state geometries obtained here are not different significantly, but the extent of formation of two covalent bonds differs appreciably. The difference is attributable to the degree of the charge transfer interactions. One is the interaction from the π orbital and/or the lone pair orbital of a ketenophile to the LUMO of a ketene (dominant charge transfer, CT1). The other is that from the HOMO of the ketene to the π* orbital of the ketenophile (second dominant charge transfer, ct1). CT1 contributes to the formation of only one covalent bond, and ct1 does to the formation of the other. This independent function is characteristic of ketene [2+2] cycloadditions. They are not concerned with the orbital phase. We also have examined Fukui's postulate that the deformation of particular frontier orbitals causes the reaction progress. The role has been verified both by configuration analyses along the intrinsic reaction coordinate of the ketene-ethylene reaction and by the examination of distortions of frontier-orbital shapes along the low-frequency vibrational modes. Received: 25 June 1998 / Accepted: 28 August 1998 / Published online: 11 November 1998     

Silver-catalyzed [2 + 2] cycloadditions of siloxy alkynes

We have described the first [2 + 2] cycloadditions of siloxy alkynes with a range of unsaturated carbonyl compounds. The reactions are efficiently promoted by substoichiometric amount of silver trifluoromethanesulfonimide and display excellent regio- and diastereoselectivity combined with a broad substrate scope. Our studies have established unambiguously the stepwise mechanism of this process and provided evidence for a novel role of silver in the catalytic cycle of the reaction, which involves silver-based complexation and activation of siloxy alkyne toward the subsequent 1,4-addition.     

Co(I)- versus Ru(II)-Catalyzed [2+2+2] cycloadditions involving alkynyl halides

Alkynyl chlorides, bromides, and iodides have been tested as [2 + 2 + 2] cycloaddition partners using CpCo(CO)(dimethylfumarate) and Cp*Ru(cod)Cl as precatalysts. A series of cocyclizations between diynyl dihalides and alkynes, as well as intramolecular cycloadditions of triynyl dihalides, has been carried out. While this study confirmed the versatility of the ruthenium complex with all kinds of halides, the cheap air-stable cobalt complex proved nonetheless efficient with alkynyl bromides.     

Intramolecular [2 + 2]cycloadditions of dialkylketenes with alkenes. Regiochemistry of intramolecular [2+2]cycloadditions of ketenes with alkenes

Unsaturated dialkylketenes 7a, 7b and 7c undergo intramolecular [2 + 2]cycloadditions to give 8a (45%), 9b (23%) and 9c (45%). Intramolecular cycloadditions of dialkylketenes give higher yields than intramolecular cycloadditions of monoalkylketenes, even though dialkylketenes are less reactive than monoalkylketenes. An intramolecular competition experiment with ketene 17 establishes that trans-alkenes are approximately 33 times more reactive than cis-alkenes in intramolecular cycloadditions. Ketene 36 furnishes 22% of the expected bicyclo[3.2.0]heptanone 37 and 28% of bicyclo[3.1.1]heptanone 38.     

Mechanically facilitated retro [4+2] cycloadditions

Poly(methyl acrylate)s (PMAs) of varying molecular weights were grown from a [4+2] cycloaddition adduct of maleimide with furan containing two polymerization initiators. Subjecting the corresponding PMA (>30 kDa) chains to ultrasound at 0 °C resulted in a retro [4+2] cycloaddition reaction, as observed by gel permeation chromatography (GPC) and UV-vis spectroscopy, as well as labeling of the liberated maleimide and furan moieties with appropriate chromophores featuring complementary functional groups. Similar results were obtained by sonicating analogous polymers that were grown from a thermally robust [4+2] cycloaddition adduct of maleimide with anthracene. The generation of anthracenyl species from these latter adducts allowed for the rate of the corresponding mechanically activated retro [4+2] cycloaddition reaction to be measured. No reduction in the number average molecular weight (M(n)) or liberation of the maleimide, furan, or anthracene moieties was observed (i) for polymers containing the cycloaddition adducts with M(n) < 20 kDa, (ii) for high molecular weight PMAs (M(n) > 60 kDa) featuring terminal cycloaddition adducts, or (iii) when the cycloaddition adducts were not covalently linked to a high molecular weight PMA. Collectively, these results support the notion that the aforementioned retro [4+2] cycloaddition processes were derived from a vectorially opposed mechanical force applied to adducts embedded within the polymer chains.