Flow-injection chemiluminescence determination of fluoroquinolones by enhancement of weak chemiluminescence from peroxynitrous acid

A flow-injection chemiluminescence (CL) method is described for the determination of fluoroquinolones including ciprofloxacin, norfloxacin and ofloxacin. The method is based on the enhancement by these compounds of the weak CL from peroxynitrous acid. The linear ranges are 1.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹ for ciprofloxacin and norfloxacin, and 3.0×10⁻⁷ to 3.0×10⁻⁵ mol l⁻¹ for ofloxacin, respectively. The detection limits (S/N=3) are 4.5×10⁻⁸ mol l⁻¹ ciprofloxacin, 5.9×10⁻⁸ mol l⁻¹ norfloxacin and 1.1×10⁻⁷ mol l⁻¹ ofloxacin, respectively. The proposed method was applied to the determination of fluoroquinolones in pharmaceutical preparations.     

Flow-injection chemiluminescence determination of chloroquine using peroxynitrous acid as oxidant

A new flow-injection chemiluminescence (CL) method for determination of chloroquine is proposed based on a stronger chemiluminescence of chloroquine in hydrogen peroxide-nitrite-sulfuric acid medium. The proposed method allows the measurement of chloroquine over the range of 3.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹. The detection limit is 8.6×10⁻⁸ mol l⁻¹, and the relative standard deviation for 1.0×10⁻⁶ mol l⁻¹ chloroquine (n=11) is 1.6%. The CL mechanism is also discussed.     

Determination of pipemidic acid based on flow-injection chemiluminescence due to energy transfer from peroxynitrous acid synthesized on-line

A flow-injection chemiluminescence (CL) method for the determination of pipemidic acid is described. It is based on energy transfer from excited state peroxynitrous acid to pipemidic acid, in which the excited state peroxynitrous acid is synthesized on-line by the mixing of acid hydrogen peroxide with nitrite in a flow system and the CL is from two excited states of pipemidic acid. The proposed method allows the measurement of pipemidic acid over the range of 2.0×10^–7–2.0×10^–5 mol l^–1 . The detection limit is 6.3×10^–8 mol l^–1, and the relative standard deviation for 2.0×10^–6 mol l^–1 pipemidic acid (n= 9) is 0.9%. This method was evaluated by the analysis of pipemidic acid in pharmaceutical preparations.     

Spectrophotometric determination of nitrite based on its catalytic effect on the oxidation of carminic acid by bromate

A highly sensitive and selective method is described for the determination of trace amounts of nitrite based on its effect on the oxidation of carminic acid with bromate. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of carminic acid at 490 nm after 3 min of mixing the reagents. The optimum reaction conditions were 1.8×10⁻¹ mol l⁻¹ H₂SO₄, 3.8×10⁻³ mol l⁻¹ KBrO₃, and 1.2×10⁻⁴ mol l⁻¹ carminic acid at 30°C. By using the recommended procedure, the calibration graph was linear from 0.2 to 14 ng ml⁻¹ of nitrite; the detection limit was 0.04 ng ml⁻¹; the R.S.D. for six replicate determinations of 6 ng ml⁻¹ was 1.7%. The method is mostly free from interference, especially from large amounts of nitrate and ammonium ions. The proposed method was applied to the determination of nitrite in rain and river water.     

CdTe nanocrystals-enhanced chemiluminescence from peroxynitrous acid-carbonate and its application to the direct determination of nitrite

It was found that CdTe semiconductor nanocrystals (NCs) can induce a great sensitized effect on chemiluminescence (CL) emission from peroxynitrous acid (ONOOH)-Na(2)CO(3) system. CL spectra, fluorescence (FL) spectra, and the quenching effect of reactive oxygen species were used to investigate the CL reaction mechanism. The CL intensity was proportional to the concentration of nitrite in the range from 0.05 to 50μM. The detection limit (S/N=3) was 0.024μM and the relative standard deviation (RSD) for five repeated measurements of 0.5μM nitrite was 4.2%. This method has been successfully applied to determine nitrite in well water samples with recoveries of 94.0-100.5%. This was the first work for direct (not inhibition effect) determination of analytes using semiconductor NCs-based CL sensor.     

流动注射化学发光法测定痕量NO_2~-的研究与应用

Based on the principle of the reaction of NO2-with I-and formation of I2 in HCl solution,and the chemiluminescence(CL) reaction between luminol and I2 in an alkaline medium.A fairly sensitive,simple and rapid flow-injection analysis-chemiluminescence method for the determina-tion of trace nitrite with the luminal-I——NO2-coupling luminescence system has been developed.Experiment conditions of flow-injection analysis are optimized.When satisfying the condition that Luminol as 4.0×10-4 mol/L,0.7 % KI,0.04 mol/...     

Determination of traces of nitrite and nitrate in water by solid phase spectrophotometry

A simple and sensitive method for the determination of nitrite and nitrate in water using solid phase spectrophotometry is described. The method utilizes the quantitative and rapid sorption of the dye formed from nitrite, using the Griess reaction, into a thin layer of polyurethane foam (PUF) where a preconcentration factor of >140 has been achieved. Nitrate is pre-reduced using a cadmium reductor before applying the Griess reaction. The direct spectrophotometric measurement of the dye enriched in the solid foam phase has allowed the detection of as little as 5 and 40 ng ml⁻¹ nitrite and nitrate, respectively. Optimization of the parameters affecting the quantitative formation and sorption of the dye into PUF has been considered. Analysis of natural water samples has been performed.     

A novel method for the spectrophotometric determination of nitrite in water

A rapid, simple, selective and sensitive method for the spectrophotometric determination of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. Nitrite reacts with barbituric acid in acidic solution to give the nitroso derivative, violuric acid. At analytical wavelength of 310 nm, Beer's law is obeyed over the concentration range 0.00–3.22 ppm of nitrite. The molar absorptivity is 15330 ± 259.7 (95%) with pooled standard deviation of 355.57 and R.S.D. of 2.32%. As well as the method is sensitive (2.99 × 10⁻³ μg NO₂ cm⁻²) and selective, it tolerates most of the potential interferents. It has been successfully applied to nitrite determination in natural waters by use of a calibration graph with determination limit of 1.66 μg NO₂ in 100 mL working solution corresponding to minimum 9.5 ppb NO₂–N in water samples. Lower concentrations of nitrite (3.0 μg NO₂/L sample) is precisely analyzed by using the method of dilution with sample, with R.S.D. of lower than 0.5%. The results were compared with standard N-(1-naphtyl)ethylenediamine dihydrochloride method and very good agreement between the data was observed. The method can easily be applied in the field.     

Chemiluminescence determination of 20 amino acids and the mechanism study

<正>It was found that 20 amino acids could inhibit the intensity of the luminol-H_2O_2-CuSO_4 chemiluminescence system.Using this character,a rapid and sensitive method for the determination of 20 amino acids was developed with flow injection coupled with chemiluminescence detection.Under the optimal conditions,the detection limits of 20 amino acids were in the range of 4.5×10~(-7)- 4.3×10~(-10) mol/L,and the relative standard deviations were less than 3.2%.The proposed method was successfully applied to drug analysis.The possible mechanism was also discussed.     

Determination of nitrite in tap waters based on fluorosurfactant-capped gold nanoparticles-enhanced chemiluminescence from carbonate and peroxynitrous acid

Fluorosurfactant (FSN)-capped gold nanoparticles (GNPs), which exhibit higher stability at a wider pH range and high ionic strength, were utilized for investigating the chemiluminescence (CL) effect on the reaction between high concentration carbonate (~0.3 M) and peroxynitrous acid. When the pH of the colloidal solution was 10.2 by dropwise addition of 0.05 M NaOH, FSN-capped GNPs offer an enhanced CL intensity. Based on the CL spectra, XPS spectra and the quenching effect of reactive oxygen species, a possible CL mechanism is proposed. The tolerance of FSN-capped GNPs towards salt concentrations (salt proofing effect) within a large pH range is an interesting feature, compared to the other previously reported work on nanoparticles CL systems. The CL intensity is proportional to the concentration of nitrite in the range from 0.1 to 100 μM. The detection limit (S/N = 3) is 0.036 μM and the relative standard deviation (RSD) for seven repeated measurements of 0.5 μM nitrite was 2.4%. This method has been successfully applied to determine nitrite in tap waters with recoveries of 97-106%.     

In-field determination of nanomolar nitrite in seawater using a sequential injection technique combined with solid phase enrichment and colorimetric detection

A novel sequential injection method for the determination of nitrite at nanomolar level in seawater samples has been developed. The pink azo compound was formed based on the Griess reaction and quantitatively adsorbed onto a Sep-Pak C18 cartridge. The enriched azo compound was rinsed with water and ethanol (28%, v/v) in turn, and then eluted with an eluent containing 26.6% (v/v) ethanol and 0.108 mol L⁻¹ H₂SO₄. Finally the azo compound was measured using a spectrophotometer at 543 nm. Under the optimized conditions, the linear calibration ranges were 0.71–42.9 nmol L⁻¹ for a 150-mL sample and 35.7–429 nmol L⁻¹ for a 15-mL sample. The relative standard deviation of 8 measurements was 1.44% for 14.3 nmol L⁻¹ nitrite. For the 150 mL sample, the detection limit was estimated to be 0.1 nmol L⁻¹. The throughput of the method was about 4 samples per hour. The proposed method has been successfully applied to the in-field determination of nanomolar concentrations of nitrite in seawater.     

聚吡咯/亚铁氰化钾/碳纳米管修饰电极检测亚硝酸根

采用循环伏安法在滴涂碳纳米管的电极表面制备了聚吡咯/K4Fe(CN)6复合膜,研究了该电极的电化学性质及对NO2-的电催化还原。结果表明,固定于聚吡咯膜中的K4Fe(CN)6作为电子递质与碳纳米管和聚吡咯对NO2-电还原具有协同催化作用,安培法检测NO2-的线性范围为1.5×10-6～1.8×10-3mol/L,检出限为3.0×10-7mol/L,该法已用模拟水样中NO-的测定。     

Voltammetric sensor for nitrite determination based on its electrocatalytic reduction at the surface of p-duroquinone modified carbon paste electrode

A p-duroquinone (tetramethyl-p-benzoquinone) modified carbon paste electrode (DMCPE) was employed to study the electrocatalytic reduction of nitrite in aqueous solutions using cyclic voltammetry (CV), double potential-step chronoamperometry, and differential pulse voltammetry (DPV). It has found that under an optimum condition (pH 1.00), the reduction of nitrite at the surface of DMCPE occurs at a potential of about 660 mV less negative than that of an unmodified carbon paste electrode (CPE). The catalytic rate constant, k′_h, based on Andrieux and Saveant theoretical model was calculated as for scan rate 10 mV s^-1. Also, the apparent diffusion coefficient, D _app, was found as 2.5 × 10^–10 and 3.61 × 10^–5 cm² s^-1 for p-duroquinone in carbon paste matrix and nitrite in aqueous buffered solution, respectively. The values for αn_α were estimated to be −0.65 and −0.19 for the reduction of nitrite at the surface of DMCPE and CPE, respectively. The electrocatalytic reduction peak currents showed a linear dependence on the nitrite concentration, and a linear analytical curve was obtained in the ranges of 5.0 × 10^–5 M to 8.0 × 10^–3 M and 6.0 × 10^–6 M to 8.0 × 10^–4 M of nitrite concentration with CV and DPV methods, respectively. The detection limits (2σ) were determined as 2.5 × 10^–5 M and 4.3 × 10^–6 M by CV and DPV methods. This method was also applied as a simple, selective and precise method for determination of nitrite in real samples (the weak liquor from the wood and paper factory of Mazandaran province in Iran) by using a standard addition method.     

Rapid simultaneous determination of nitrate and nitrite on a centrifugal microfluidic device

A centrifugal microfluidic device was developed for the rapid sequential determination of two critical environmental species, nitrate and nitrite, in water samples. The nitrate is reduced to nitrite and the nitrite is derivatized. The analytes are determined spectrophotometrically through the disc with a 1.4 mm pathlength. The detection limits are 0.05 and 0.16 mg L⁻¹ for nitrite and nitrate respectively. The use of powdered reagents, the 100 μL sample required and the design of the device suggest that it would be suitable for field use.     

Chemiluminescence determination of tiopronin and its metabolite 2-mercaptopropionic acid in human urine by HPLC coupled with flow injection

Summary In previous pharmacokinetic studies tiopronin, a drug used for effective treatment of cystinuria and rheumatoid arthritis, and its metabolite 2-mercaptopropionic acid were analysed by conventional liquid chromatography with pre- and post-column derivatization and UV detection. Now a novel HPLC-coupled chemiluminescence-flow-injection analysis (CL-FIA) method has been developed for the determination of tiopronin and 2-mercaptopropionic acid in urine. The method is based on chemiluminescence from a Ce(IV) oxidation system sensitized by quinine, as proposed earlier by this group, and flow-injection analysis. The method, which has the advantages of high sensitivity and selectivity, simple sample treatment and prompt production of results, has also been preliminarily adapted for pharmacokinetic study of tiopronin in urine.     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

Recent progress in the determination of solid surface tensions from contact angles

Advancing contact angles of different liquids measured on the same solid surface fall very close to a smooth curve when plotted as a function of liquid surface tension, i.e., gamma(lv)costheta versus gamma(lv). Changing the solid surface, and hence gamma(sv), shifts the curve in a regular manner. These patterns suggest that gamma(lv)costheta depends only on gamma(lv) and gamma(sv). Thus, an "equation of state for the interfacial tensions" was developed to facilitate the determination of solid surface tensions from contact angles in conjunction with Young's equation. However, a close examination of the smooth curves showed that contact angles typically show a scatter of 1-3 degrees around the curves. The existence of the deviations introduces an element of uncertainty in the determination of solid surface tensions. Establishing that (i) contact angles are exclusively a material property of the coating polymer and do not depend on experimental procedures and that (ii) contact angle measurements with a sophisticated methodology, axisymmetric drop shape analysis (ADSA), are highly reproducible guarantees that the deviations are not experimental errors and must have physical causes. The contact angles of a large number of liquids on the films of four different fluoropolymers were studied to identify the causes of the deviations. Specific molecular interactions at solid-vapor and/or solid-liquid interfaces account for the minor contact angle deviations. Such interactions take place in different ways. Adsorption of vapor of the test liquid onto the solid surface is apparently the only process that influences the solid-vapor interfacial tension (gamma(sv)). The molecular interactions taking place at the solid-liquid interface are more diverse and complicated. Parallel alignment of liquid molecules at the solid surface, reorganization of liquid molecules at the solid-liquid interface, change in the configuration of polymer chains due to contact with certain probe liquids, and intermolecular interactions between solid and liquid molecules cause the solid-liquid interfacial (gamma(sl)) tension to be different from that predicted by the equation of state, i.e., gamma(sl) is not a precise function of gamma(lv) and gamma(sv). In other words, the experimental contact angles deviate from the "ideal" contact angle pattern. Specific criteria are proposed to identify probe liquids which eliminate specific molecular interactions. Octamethylcyclotetrasiloxane (OMCTS) and decamethylcyclopentasiloxane (DMCPS) are shown to meet those criteria, and therefore are the most suitable liquids to characterize surface tensions of low energy fluoropolymer films with an accuracy of +/-0.2 mJ/m2.     

Chemiluminescence method for the determination of mitoxantrone by the enhancement of the tris-(4,7-diphenyl-1,10-phenanthrolinedisulfonic acid)ruthenium(II)–cerium(IV) system

2,5-Dimercapto-1,3,4-thiadiazole (DMTD) self-assembled monolayer on gold electrode was prepared and investigated by electrochemical measurement. The DMTD/Au electrode exhibited a significantly increased sensitivity and selectivity for Pb(II) in acetate buffer (pH 5.5) at a potential of −1.0 V (vs Ag/AgCl) for 4 min by anodic stripping voltammetry. The influence of various experimental parameters on the voltammetric response was studied. Under the optimized working conditions, the dependence of the stripping peak current response on concentration of Pb(II) was linear in the range of 1–45 μmol L⁻¹ with a correlation coefficient of 0.9988, and the detection limit was 0.10 μmol L⁻¹. The relative standard deviation of the results was 3.4% for six successive determinations of a 20 μmol L⁻¹ Pb(II) solution. A study of interfering substances was also performed. The method was applied to the determination of Pb(II) in water samples with satisfactory results. Correspondence: Hong Qun Luo, School of Chemistry and Chemical Engineering, Southwest University, 400715 Chongqing, China     

Chemiluminescence of Peracetic Acid in Alkaline Medium and its Application to Dihydralazine Sulfate Determination

The chemiluminescence (CL) of peracetic acid (PAA) in alkaline medium is very weak but is strongly enhanced after the addition of dihydralazine sulfate (DHZS). Based on this phenomenon, a simple, rapid and highly sensitive flow-injection CL method for the determination of DHZS was developed. The CL emission was linearly related to the DHZS concentration in the range of 20–4000 ng mL⁻¹ with a detection limit (3σ) of 1.2 ng mL⁻¹. As a preliminary application, the proposed method was successfully applied to the determination of DHZS in pharmaceutical preparations; the recovery of DHZS in human urine was between 96.5% and 102.2%. A detailed CL mechanism was proposed and singlet molecular oxygen (¹O₂) was suggested to be produced in the CL reaction process.     

Electrochemical preparation of polyaniline-ionic liquid based solid phase microextraction fiber and its application in the determination of benzene derivatives

A polyaniline-ionic liquid (i.e. 1-butyl-3-methylimidazolium tetrafluoroborate, [C(4)mim][BF(4)]) composite film coated platinum wire (PANI-IL/Pt) was prepared by electrochemical method for the first time. Scanning electron microscopy image showed that the PANI-IL composite film was even and porous. When the PANI-IL/Pt was used as a fiber for the headspace solid-phase microextraction (HS-SPME) of some benzene derivatives (i.e. 1,3-dimethylbenzene, 1,2-dimethylbenzene, 1,4-dichlorobenzene, 1,2-dichlorobenzene, 1,3,5-trimethylbenzene and 1,2,4-trimethylbenzene), followed by gas chromatographic analysis, it presented excellent performance, which was much better than that of PANI/Pt and commercial polydimethylsiloxane fiber. Hence the fiber was coupled with gas chromatography for the determination of these benzene derivatives. It was found that under the optimized conditions the linear ranges were 0.04-400 μg L(-1) with correlation coefficients above 0.99, the detection limits were 9.3-48.1 ng L(-1) (S/N=3), the relative standard deviations (RSDs) were smaller than 5.1% for five successive measurements with single fiber, and the RSDs for fiber-to-fiber were 5.0-11.1% (n=3) for different benzene derivatives. The proposed method was successfully applied to the extraction and determination of benzene derivatives in waste water and tap water, and the recoveries were 87.1-108.1% for different analytes. Therefore, the PANI-IL/Pt is a promising SPME fiber.