Synthesis and characterization of functional l-lactic acid/citric acid oligomer

Oligomers of l-lactic acid and citric acid (PLCA) were synthesized by reacting lactic acid with citric acid in the presence of stannous chloride. The chemical compositions of these multicarboxylated oligomers were verified by FT-IR and ¹H-NMR spectroscopy. The thermal characteristics of the oligomers, such as glass transition temperature T_g, melting temperature T_m and melting enthalpy, were confirmed by DSC. The crystallinity of the oligomers were determined by DSC and WXRD. Meanwhile, the acid-base surface characteristics of PLCA have been determined by contact angle. The results implicated that these oligomers may be used to entrap the cospecies on PLLA surface in tissue engineering.     

Lipase-catalyzed synthesis of biodegradable copolymer containing malic acid units in solvent-free system

This work is to explore a new route to synthesize functional polyesters bearing pendant hydroxyl groups. The approach is via biocatalyzed direct polycondensation. l-Malic acid, adipic acid and 1,8-octanediol were used as comonomers and lipase Novozym 435 as a biocatalyst. ¹H NMR studies on the structure of the products indicated that Novozym 435 was strictly selective for esterification of l-malic acid carboxyl groups while leaving the hydroxyl groups unchanged. The influences of the monomer feeding ratio, reaction temperature, and reaction time on the molecular weight of the products were investigated. By varying l-malic acid feed ratio in the total monomers from 0 to 20 mol%, the molecular weight (M_W) of the product changed from 9.5 kilo Dalton (kD) to 4.7 kD while reaction was held at 70 °C for 48 h. The maximum M_W could reach 7.4 kD at 80 °C when varying temperature between 70 and 90 °C if l-malic acid is 20 mol% and reaction time is 48 h. At 75 °C the M_W increased from 5.2 kD to 6.6 kD when reaction time was elongated from 48 h to 72 h. However, little change in M_W was observed at 80 and 85 °C when the reaction time was above 48 h. Thermal property of the copolyesters was studied by differential scanning calorimetry (DSC). Increasing the l-malic acid content in copolyesters resulted in melting temperature depression.     

Determination of L- and D-enantiomers of methotrexate using amperometric biosensors

In order to determine the enantiopurity of methotrexate (Mtx), seven biosensors were proposed for the assay of l-Mtx and three biosensors for the assay of d-Mtx. The biosensors were designed using physical and chemical immobilization of glutamate oxidase and/or l-amino acid oxidase (l-AAOD) and/or horseradish peroxidase (HRP) for the assay of l-methotherexate, and d-amino acid oxidase (d-AAOD) and HRP for the assay of d-Mtx. Electrode characteristics were obtained and compared for the different carbon paste based biosensors. The linear concentration ranges for the proposed biosensors were in the ranges of fmol l⁻¹ to pmol l⁻¹, magnitude order with limits of detection in the fmol l⁻¹ to nmol l⁻¹ concentration range. All biosensors were successful for the determination of the enantiopurity of Mtx as raw material, and in its pharmaceutical formulations (tablets and injections).     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

New building blocks for peptide and depsipeptide synthesis: hexafluoroacetone protected l-homoisoserine and d,l-homoisocysteine derivatives

Efficient syntheses of l-homoisoserine and d,l-homoisocysteine derivatives starting from l-malic and d,l-thiomalic acid using hexafluoroacetone as protecting and activating agent are described. The new compounds are interesting building blocks for the preparation of non-natural peptides and depsipeptides as well as for the construction of new GABA derivatives.     

Stereoselective total synthesis of polyrhacitide A

Stereoselective total synthesis of polyketide lactone isolated from Chinese medicinal ant Polyrhacis lamellidens is described. Ring-closing metathesis followed by stereoselective intramolecular oxa-Michael addition reactions were used to construct the bicyclic lactone moiety in the molecule and l-malic acid was used as a chiral pool material     

Hydrolytic degradation of copolymers based on l-lactic acid and bis-2-hydroxyethyl terephthalate

The current demand for environmentally degradable copolymers has led to the use of novel degradable copolyesters. A series of copolyesters based on bis-2-hydroxyethyl terephthalate and l-lactic acid oligomers were synthesized by melt polycondensation [Olewnik E, Czerwiński W, Nowaczyk J, Sepulchre M-O, Tessier M, Salhi S, et al. Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate). Eur Polym J, in press]. Hydrolytic degradation of copolymers containing 16.8-52.9 mole ratio of l-lactic acid units was carried out in two buffered solutions at two different temperatures: phosphate buffer solution (pH 7.40) at 45 °C and phosphate-citric buffer solution (pH 7.35) at 60 °C. Degradation of copolyesters was studied by incubating samples in powder form in a concentrated solution from 30 to 180 days.The copolymers were characterized by various analytical techniques. The thermal properties, morphology and structural changes during controlled hydrolysis were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for determining melting points, heats of melting and decomposition temperatures of investigated copolyesters. ¹H NMR spectroscopy was used to observe the decomposition of the polyesters.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Stabilization of poly(lactic acid) by polycarbodiimide

Polycarbodiimide (CDI) was used to improve the thermal stability of poly(l-lactic acid) (PLA) during processing. The properties of PLA containing various amounts of CDI were characterized by GPC, DSC, rheology, and tensile tests. The results showed that an addition of CDI in an amount of 0.1-0.7 wt% with respect to PLA led to stabilization of PLA at even 210 °C for up to 30 min, as evidenced by much smaller changes in molecular weight, melt viscosity, and tensile strength and elongation compared to the blank PLA samples. In order to examine the possible stabilization mechanism, CDI was reacted with water, acetic acid, l-lactic acid, ethanol and low molecular weight PLA. The molecular structures of the reaction products were measured with FTIR. The results showed that CDI could react with the residual or newly formed moisture and lactic acid, or carboxyl and hydroxyl end groups in the PLA samples, and thus hamper the thermal degradation and hydrolysis of PLA.     

Quantitative evaluation of photodegradation and racemization of poly(l-lactic acid) under UV-C irradiation

To obtain details of poly(l-lactic acid) (PLLA) photodegradation behavior, PLLA films were irradiated by UV-C light (λ = 253.7 nm) to directly excite carbonyl groups, resulting in a rapid decrease in the molecular weight accompanying a gradual decrease in the optical purity of monomeric units in the chains. The racemization during the photodegradation was first detected as a result of the chain scission by irradiation. From quantitative analyses of the molecular weight and the monomeric unit composition, it was found that the chain scission ratio and the d-lactate unit ratio increased in parallel during the irradiation, suggesting that approximately one d-lactate unit formed for every chain scission. From a mechanistic consideration, the racemization equilibrium was proposed to occur at both carboxyl and hydroxyl chain ends.     

Synthesis of high-molecular-weight poly(l-lactic acid) through the direct condensation polymerization of l-lactic acid in bulk state

A strategy was attempted to produce high-molecular-weight poly(l-lactic acid) (PLLA) through the direct condensation polymerization of l-lactic acid in bulk state. Polymerizations were carried out with titanium(IV) butoxide (TNBT) as a catalyst employing different duration of decompression, esterification and polycondensation. The molecular weights were characterized by using the gel permeation chromatography (GPC). The stereosequences were analyzed from the ¹³C NMR spectra on the basis of the triad fractions.     

Integrated multienzyme electrochemical biosensors for monitoring malolactic fermentation in wines

Integrated amperometric biosensors for the determination of l-malic and l-lactic acids were developed by coimmobilization of the enzymes l-malate dehydrogenase (MDH) and diaphorase (DP), or l-lactate oxidase (LOX) and horseradish peroxidase (HRP), respectively, together with the redox mediator tetrathiafulvalene (TTF), on a 3-mercaptopropionic acid (MPA) self-assembled monolayer (SAM)-modified gold electrode by using a dialysis membrane. The electrochemical oxidation of TTF at +100 mV (vs. Ag/AgCl), and the reduction of TTF⁺ at −50 mV were used for the monitoring of the enzyme reactions involved in l-malic and l-lactic acid determinations, respectively. Experimental variables concerning the biosensors composition and the detection conditions were optimized for each biosensor. Good relative standard deviation values were obtained in both cases for the measurements carried out with the same biosensor, with no need of cleaning or pretreatment of the bioelectrodes surface, and with different biosensors constructed in the same manner. After 7 days of continuous use, the MDH/DP biosensor still exhibited 90% of the original sensitivity, while the LOX/HRP biosensor yielded a 91% of the original response after 5 days. Calibration graphs for l-malic and l-lactic were obtained with linear ranges of 5.2 × 10⁻⁷ to 2.0 × 10⁻⁵ and 4.2 × 10⁻⁷ to 2.0 × 10⁻⁵ M, respectively. The calculated detection limits were 5.2 × 10⁻⁷ and 4.2 × 10⁻⁷ M, respectively. The biosensors exhibited a high selectivity with no significant interferences. They were applied to monitor malolactic fermentation (MLF) induced by inoculation of Lactobacillus plantarum CECT 748^T into a synthetic wine. Samples collected during MLF were assayed for l-malic and l-lactic acids, and the results obtained with the biosensors exhibited a very good correlation when plotted against those obtained by using commercial enzymatic kits.     

Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).     

An efficient approach to d-threo-3-hydroxyaspartic acid for the synthesis of novel l-threo-oxazolines as selective blockers of glutamate reversed uptake

An efficient, stereoselective synthetic strategy to d-threo-3-hydroxyaspartic acid was developed. Starting from l-(2S,3S)-N-benzoyl-3-hydroxyaspartic acid dimethyl ester by a Deoxo-fluor-catalyzed cyclization reaction, an inversion of configuration at the β-center (erythro isomer), was observed. A base-induced epimerization reaction led to the d-trans-isomer, which was hydrolyzed to give d-threo-3-hydroxyaspartic acid with excellent stereoselectivity and overall yield. Starting from d-threo-3-hydroxyaspartic acid, l-threo-oxazolines can be stereoselectively synthesized.     

New pyrano[3,4-b]indoles from 2-hydroxymethylindole and l-dehydroascorbic acid

2-Hydroxymethylindole reacts with l-dehydroascorbic acid under mild conditions to give (3R,3aR,10cS)-3-[(1S)-1,2-dihydroxyethyl]-3a,10c-dihydroxy-3a,5,6,10c-tetrahydrofuro[3′,4′:5,6]pyrano[3,4-b]indol-1(3H)-one. Its tosyl derivative undergoes cyclization to form a pentacyclic ketal derivative.     

Enhancing microdialysis recovery of metal ions by incorporating poly-l-aspartic acid and poly-l-histidine in the perfusion liquid

A study of the evaluation of poly-l-aspartic acid and poly-l-histidine as binding agents to enhance microdialysis recovery of metal ions is presented. Investigations were carried out to compare microdialysis recovery for Cr, Cu, Ni, and Pb when using water as the perfusion liquid as well as when using various concentrations of poly-l-aspartic acid and poly-l-histidine in the perfusion liquid. All experiments were carried out under quiescent conditions using a concentric type of microdialysis probe fitted with a polysulfone membrane having a 30 kDa molecular weight cut-off and a 10 mm effective dialysis length. The metal ions were determined using an electrothermal atomic absorption spectrometer equipped with a Zeemann background corrector. Incorporation of 0.032% (w/v) of poly-l-aspartic acid enhanced the recovery of Cu and Pb by factors of 90 and 64%, respectively (%RSD<3). The recovery of Cr was enhanced by 5%, but that of Ni never exceeded values achieved using ultra pure water. The use of 20% (w/v) of poly-l-histidine resulted in enhancement factors of 66 and 4% for Cu and Pb, respectively (%RSD<2). For both Cr and Ni, the recovery never exceeded that achieved with water. The data from these studies demonstrate the suitability of poly-l-aspartic and poly-l-histidine as selective and effective binding agents that enhance the microdialysis recovery of metal ions. Application of the optimised conditions to the determination of Pb and Cu in a wastewater sample confirmed the versatility of microdialysis, as higher recoveries of Cu were obtained with poly-l-aspartic acid compared to direct determination.     

Synthesis and characterization of PLLA-PLCA-PEG multiblock copolymers and their applications in modifying PLLA porous scaffolds

Poly(l-lactic acid)-poly(l-lactic acid-co-citric acid)-poly(ethylene glycol) multiblock copolymers (PLLA-PLCA-PEG) were synthesized through polycondensation reaction and characterized by ¹H NMR and DSC. The three-dimensional ultrafine fibre microporous PLLA/PLLA-PLCA-PEG scaffolds were then fabricated by modifying PLLA with PLLA-PLCA-PEG through blending and characterized as well. Properties of scaffolds such as swelling and degradation behaviors, morphology and mechanical moduli were fully investigated. Tetrandrine-loaded PLLA/PLLA-PLCA-PEG scaffolds were also fabricated and their drug releasing behaviors were taken into consideration. Compressive testing research shows that the mechanical flexibility improves as the content of PLLA-PLCA-PEG copolymers in the scaffolds increases. The TED encapsulation efficiency of the scaffold is enhanced when the amount of PLLA-PLCA-PEG increases because of the acid-base interaction between carboxylic acid groups of the copolymer with TED. The releasing velocity of TED speeds up while the PLLA-PLCA-PEG blocks ratios in scaffolds increase. So modification of PLLA scaffold with PLLA-PLCA-PEG shall broaden its applications in tissue engineering.     

Crystallization behavior of poly(l-lactic acid)

This article contains a detailed analysis of the crystallization behavior of poly(l-lactic acid) (PLLA). Crystallization rates of PLLA have been measured in a wide temperature range, using both isothermal and non-isothermal methods. The combined usage of multiple thermal treatments allowed to obtain information on crystallization kinetics of PLLA at temperatures almost ranging from glass transition to melting point. Crystallization rate of PLLA is very high at temperatures between 100 and 118 °C, showing a clear deviation from the usual bell-shaped curve. This discontinuity has been ascribed to a sudden acceleration in spherulite growth, and is not associated to morphological changes in the appearance of PLLA spherulites. Experimental data of spherulite growth rates of PLLA have been analyzed with Hoffman-Lauritzen method. Applicability and limitations of this theoretical treatment have been discussed.     

Stereoselective total synthesis of (−)-decarestrictine D from l-malic acid

A convergent stereoselective total synthesis of (−)-decarestrictine D from l-malic acid is reported.     

Microbial screening in hydroxylation of l-proline

Microbial screening of 250 wild type strains resulted in identification of five strains with the activity of prolyl hydroxylase. All five strains hydroxylated regioselectively and enantioselectively l-proline into 4(R)-trans-hydroxy-l-proline 1. The best conversions were obtained with a wild type of Aeromonas caviae. 3-Hydroxylase activity was not detected.